ODI Tamer Cams for '23+ KTM TBI

[@timmartin370]

Nice informative way of explaining how the device "tames" the throttle. It's most helpful for coming off idle when the throttle feels most "snatchy" when trying to hold a low RPM.

[@slaverace1]

Glad you liked it

[@rehepeks]

My 24 300EXC came from dealer with the agressive cam installed but a smaller diameter cam was provided together with the bike. Same was with my 18 Husqvarna FE350 when I bought that years ago.

[@knobbysidedown4258]

What cam (letter) are you referring to from the odi grip set?

[@gregharris2928]

When I put a Vortex ECU (set to map 1) in my 24 XWF 350, my throttle became way too sensitive and I couldn’t control all that intense power for tight single track riding. I don’t want to switch to map 2 (less explosive power) Therefore, my only fix is to switch to the tamer cam correct? Thanks Jeff for sharing your knowledge with us. Happy Trails Y’all!

[@slaverace1]

Hello: Yes, a throttle tamer will help BUT why not just switch maps? Just takes a minute.

[@gregharris2928]

@@slaverace1Thanks Jeff. I will try Map 2 ASAP and test it out before the Snow flies up in Teller Co. Thanks for answering my question.

[@assaftennenbaum6751]

These come stock with alignment marks. You can clearly see them in the video at the 7 o'clock position

[@mototrailz]

I was about to comment the same thing...odi thought about it. you can't go wrong

[@richardhartley7094]

👍👍

[@YeaItsSlo]

Can you share the cam letter?

[@slaverace1]

Hello: Sorry, I don't know the cam letter.

[@justinmeyer77]

Will these work on the new small TBI bikes like a TC150?

[@slaverace1]

Yes

[@justinmeyer77]

@@slaverace1 Do you happen to know the model on the cam you're recommending? (Cam A, Cam S2, etc...). Thanks!

[@evr-mr3cp]

If I purchased a set of the odi grips would this work on my 23 Sherco 300sef? BTW, the Sherco does not come from the factory with a push cable, only pull. Keep up the good work Jeff.

[@barnescycle]

So the black one is the mild one I suppose 🤔 😊

[@onthethrottle7104]

The closer the holes are together the more mild it is, so yes.