Sliding table for the band saw

[@ManorWood]

Just started my first project using the FB510 , if you fancy a look . Will be going a video on just the FB510 showing the Blades I have bought to test after I finish my new bench

[@johnpolen8742]

Thanks for making the Festool sliding table have an alternative use. I have an extra one and have looked for alternative uses. I stumbled on to your video looking at bandsaws. I also like your fence. I have a 60 year old Davis and Wells 20 inch bandsaw with an archaic fence and miter gauge, thanks again for the ideas.

[@Rich206L]

Necessity breeds invention, well done, Andrei! Rich

[@wood-youbelieveit552]

Awesome addition to you band saw ,great job , great video , thanks for sharing !!!

[@WOODMAN_pt]

Это как идея карандаша с резинкой.Гениально ! И пила есть и такая каретка есть. Но соеденить вместе не додумался.Спасибо !Возьму не вооружение.Успехов.

[@danielbenda6352]

Absolutely ingenious! and such a simple solution too. You might be the first but I am sure after this it won't be the last!

[@sepstersepster9297]

Awesome !....i can see lot's of advantages with the sliding table attached ! Great idea 👍🏽👍🏽👍🏽

[@johnwilson512]

This is an incredible idea. I have all of the pieces here to get this done. Thank you for sharing!

[@richardpatterson4312]

Where can I buy this setup? I have a saw just not the table. Thank you

[@Valesmasters1966]

Отличная идея!!! Теперь народ точно начнёт что то подобное клепать:))) С меня однозначно лайк

[@ManorWood]

Did you have to drill the Festool Rail system to make it fit the Felder table

[@mtmwood]

Yes.

[@nitsn_france]

Wow, I'm jealous of your setup ! This is amazing !!!

[@hgils]

👍 That's a excellent addition to a band saw!

[@dawsie]

🤔umm now that's an interesting add on and will certainly make cutting a lot easier thanks for showing this add on I did not even know there was such an item out there and wonder if it can be used in other cutting applications. Something for me to looking to 🙃thanks for showing this addition 🤗

[@musamor75]

Great idea. I suppose you're using the bandsaw for economy, because if you make ten cuts on the table saw you've lost at least 3 cm of wood. With woods like Purple Heart and Padouk this can be significant. Like many of your viewers, I also enjoy your videos very much. All the best from Paris.

[@mtmwood]

Right. I talk about this in Russian. I use 0.8 mm thick blade, so the kerf is about 1.2 mm. The standard table saw blade is 3.2 mm. Thanks!

[@ПаЛыЧ-т8в]

Молодец!!! работу надо облегчать, хоть она и приносит радость. успехов в вашем деле!!!

[@rickmccaskill7888]

Is this something you made or purchased. If made do you have any plans? If purchased, could you provide a link to the slide? Thank you so much.

[@drewjohnson4673]

Where can I get the sliding table and rails? Thanks

[@chokeyourchicken4]

I don't care what they say, I still thought this was a good idea! Glad you thought of it first. Funny, the things you can accomplish if you have the Money. Good job Andre

[@demonicmasters8520]

one of my top 3 favorite KZbinrs and we have a language barrier lol, keep up the good work though my friend 👍

[@mtmwood]

Thanks! Did you read the subtitles?

[@demonicmasters8520]

mtmwood yes, I'm in ninth grade and I currently do woodworking at my school and it's my favorite class and I plan on making a cutting board with your designs lol

[@XXCoder]

This channel is one of my favorites. One of reasons is captions. Real captions, not one of those automatic crap captions.

[@vjgrevem]

Yes, good informative captions, but they don't seem to be verbatim. Looks like he's saying more than the captions reveal. Is that correct, Andre?

[@vancehough93]

Who sells that aluminum crosscut table ?

[@AndreaArzensek]

That's a great idea Andrei! Giving the amount of wood you cut in a year this should make savings quite noticeable! Cheers

[@robinfavron6503]

Great innovation, the only one left to make is cutting from both sides or lasers! Question: If the slider is raised above the table, does this create an angle in the cut? ... I will keep this video from my wife or she'll want some for the kitchen lol.

[@skillwoodchippy2017]

Great idea!:).Perhaps you could influence a Felder enginers to design and produce a sliding tables for theirs bandsaws,but it is great sometimes to create something yourself from sources available within your workshop and for that I give you a Big thumb up👍.Thank you for sharing.Regards.Jacob

[@mtmwood]

Sliding table is very useful on the big band saw. But this one is too weak for big panels.

[@benfriel12]

Very nice. I must ask as the panel gets short how do you keep square. Or not so important for you?

[@MrRazp]

Посмеялся. "Я долго думал как это сделать." И придумал - взял имеющуюся в наличии готовую каретку :) Это читерство! :) Жду видео с новыми досками и изделиями.

[@Psychlist1972]

Looks like a Felder bandsaw. Nice mod.

[@drewjohnson4673]

Where do I get these parts?

[@decimomaximomeridio1]

Please, put some rubber or a piece of wood in the sharp points of the sliding bar... your lovely kids play around the shop and the sliding bar its so low in height... Thanks for sharing, and sorry about my English. Saludos desde México.

[@stephboeker7835]

Very Nice !! :) Love your video's , projects and tutorials ! Thanks for sharing !!

[@Baziell]

Looks like felder listened to you or saw this video. They just released a sliding table bandsaw.

[@wookdmakerbrasil674]

seus trabalhos são magníficos! Parabéns

[@Fran-jw1sr]

Wow, you did this 2 years before Izzy Swan

[@ПетрДавыдов-ж5в]

поставь на каретку вертикальный прижим как на торцовке и не надо будет весь щит обнимать.

[@АлександрЗалевский-ю2с]

Иван баев

[@firepro1612]

very nice thanks for the English subtitles but ingenuity and pictures speaks 1000 words. You have given me a couple ideas, thanks again for the video

[@gunj75]

Запатентовал?

[@AndyGrayedout]

I now have my FB510 , would be great to get some advice on best blade to use for crosscutting like this ? I am thinking of adding the Festool Sliding table as well :)

[@mtmwood]

I use only 3 TPI. For crosscutting you need more teeth.

[@AndyGrayedout]

mtmwood ok thank you . I am try some ground tooth blades to get a better finish , have been told they are used for meat and fish but also great for fine wood cuts

[@mtmwood]

Once I used meat saw blade, but didn't like it.

[@AndyGrayedout]

Just received a "Hakansson Citu 33-1204 3/4” x4tpi 020 citu" - an amazing clean cut.!i have only cut a test piece of hardwood but its the best cut i have had so far ..

[@HomeswithPedram]

Hi, Where did you purchase this sliding table for your bandsaw? i'm looking for something similar!

[@mtmwood]

I don't know. It is a Festool sliding table. www.google.ru/search?q=band+saw+sliding+table&newwindow=1&source=lnms&tbm=isch&sa=X&ved=0ahUKEwio47vj5dfeAhUNmYsKHQbGAM8Q_AUIDigB&biw=1666&bih=815

[@zaba2672]

Андрей вопрос офтоп, заметил ты ставишь смайл " :) " говорят американцы его непонимаяют , какая-то скобка с точками

[@mtmwood]

Не знал об этом. Это что, наше изобретение?:)

[@zaba2672]

да его используют токо в странах СНГ, вот так вот XD В каком-то ролике увидил

[@dr.ericmuller6467]

Perfecto, Very nice

[@ИмяФамилия-ш5ж6ш]

весна пришла. как там проект "сушильная доска"?

[@mtmwood]

У нас снега по пояс.

[@ОлегМильшин]

А.В. не стоит на месте и находит новые возможности))

[@egorashev]

Есть ленточнопильные станки, с кареткой, по типу форматника, только вместо пильного диска стоит ленточка, к примеру станок GRIGGIO "SWING 640" .

[@mtmwood]

Посмотрел. Хорошая машина.

[@igorcws8750]

Ага, тоже хотел про такие сказать!

[@igorcws8750]

Поздравляю Вас с первым в мире, именно ленточным Фелдером, с кареткой! Классная идея и воплощение! И, хорошо, что у нас мысли сходятся!

[@leksey7870]

Хорошее приспособление.

[@Taraskin75]

А как называется ваша ленточная пила?

[@mtmwood]

kzbin.info/www/bejne/n4SlhXV_fdCpe9E

[@AndyGrayedout]

does anyone know which Felder bandsaw this is ?

[@mtmwood]

kzbin.info/www/bejne/n4SlhXV_fdCpe9E

[@AndyGrayedout]

Thanks for this the 710 look amazing, I am about to order a 510 my self , I just wonder how straight the rips cuts are and if you have to user a joiner after when making your boards ? also do you this the X ceramic guide helps with straight cuts or just longer life?

[@mtmwood]

I use a planer. Ceramic guides are good.

[@pjmd2010]

you can tell the felder guys to see the griggio band saw, they have a very big sliding band saw

[@mtmwood]

OK

[@ColeSkaggs]

Congrats on first!

[@anthonydtobias]

You Russians always seem to be very resourceful. Great job as usual! 👍

[@mtmwood]

Thanks! :)

[@Dahna_]

you should have patented this. Now there are lots of them.

[@vols133]

из-за того что каретка выше стола, заготовка ведь будет пилиться под небольшим углом, нет?

[@mtmwood]

Там менее полумиллиметра.

[@zerocool4eg]

он же в видео сказал, что так и задумано, чтоб трение меньше было о поверхность стола ...

[@ИгорьКовальков-м3ш]

а без каретки там трение такое что доски в пыль стираются?

[@zerocool4eg]

усилие - оно там не шибко нужная штука. ибо руки могут с усилия сорваться и пил станет ещё хреновее

[@_stalkerok]

Усилием можно остаться без пальцев или кисти, особенно если фрезер или циркулярка, лучше использовать прижимы, как тут в комментах советует Петр Давыдов. Каретка и так значительно снижает усилия для прижима заготовки. Чем меньше трение, тем удобнее и быстрее.

[@ЕгорШульженко-м1щ]

Кто то должен быть первым. Дай бог не последний раз.

[@daviddavis5689]

Or you could make a sled as many do cheaply.

[@ЮжнаяЖизнь]

осталось найти каретку от фестул)))

[@mtmwood]

Это несложно.:)

[@АндрейКопейкин-з9и]

когда ты первый в мире...

[@joekonopka9753]

I want one

[@АндрейБухарцев-б6ш]

У Вас редко стали выходить видео !!!

[@mtmwood]

Работаю, однако.:)

[@ОлДар-э1г]

зайди с другой сторону и тащи на себя, пила будет справо

[@Stan7670]

Congratulations for being first.

[@MelingAlex]

запатентовать

[@omtikity2768]

jamón

[@sergejstricker3180]

Felder дал вам неправдивую информацию. Вот ленточная пила с кореткой от фирмы Holzkraft www.top-maschinen.de/media/catalog/product/cache/1/image/500x500/9df78eab33525d08d6e5fb8d27136e95/h/o/holzkraft-holz-bandsaege-fbs-940-3-f32_817842_1.jpg

[@user-yl8qp9li9r]

патент))

[@slahsamet8722]

magnificent I think the table saw is no longer useful!

[@alanfalleur6550]

For resawing, yes. However, table saw can make a less than a full depth cut, which is impossible on a band saw.

[@TeknixTrix]

Niet niet - ok - da English please :-))))

[@mtmwood]

Turn on subtitles