Can-Am Spyder RT Saddlebag LED Reflectors (2020+)

[@frankposada8198]

Thank you so much for the great video. Very useful and great presentation!

[@allee68]

Only suggestion is to test before gluing it down.

[@mychanelbr777]

What are the others wires for? Hooking up trailer harness? Are they the rear turn signal power brake light power?

[@SpyderRTL]

The video needs updating for the 21 models. The Torx on the bottom is now a #10 nut and bolt. There are two bolts at the top of the case that have to be removed, On the left hand side there was no way to run the wires to the connector. I ended up drilling a whole at the top on the inside plastic. You do not need to remove/loosen the rear lights. Once the plastic is off you can easily reach the connectors.

[@Slingmods]

Hello Don.. we don't have a 21' model here to re-shoot the video unfortunately.. but I'm sure others will find your comments quite useful. Thanks for sharing.

[@henrystarks354]

I have a 2023 how many rear lights set can you hook up. I have three to install.

[@Slingmods]

That's fine. We have all of the rear lights we sell installed on our RT without issue.

[@jeromehebert3184]

can install them where they also work with the blinkers?

[@Slingmods]

Hello Jerome, these are just running lights. They do not offer blinker functionality.

[@RichardJoashTan]

Does this work on the international version of the 2020 RT models?

[@Slingmods]

Hello Richard, we unfortunately do not have access to an International RT model to verify this for you. My apologies sir.

[@RichardJoashTan]

@@Slingmods it's ok. Thanks.