This video is a huge help. thank you. Just a quick question.. are the jack rods encased into the concrete just like the reinforcement, or no? any help is appreciated :))
@SITENG11 ай бұрын
Happy to help. Yes, they are 👍
@Chrisbedford173 жыл бұрын
nice to see greg
@SITENG3 жыл бұрын
Thanks Chris!
@faisalellias428526 күн бұрын
How you control verticallity?
@SITENG21 күн бұрын
this one has a lasers set and show the position all the time. It's a slipform driver's job really to keep it right and keep correcting as we go
@georgea1116 Жыл бұрын
Great video mate. Loads of information. Cheers
@SITENG Жыл бұрын
Thanks 👍
@EricHommeric2 жыл бұрын
Good vlog , I worked once on the slipforms , not for me , I don’t like heights and tight places :)
@SITENG2 жыл бұрын
Thanks Eric! Yeah slipform is very specific job and not for everyone. I don't like it too, I couldn't work all the time with slipforms.
@albertricohermozo442 Жыл бұрын
Hi sir good day can i apply at slipform technician .. thank you
@SITENG Жыл бұрын
You have look on LinkedIn for it, or a cv-library etc
@husseinlakkis48236 ай бұрын
Hello dear, Do you have any video for the construction of mass concrete foundation for thickness of 5 meters and above. If you have please let me know and how could contact you. would be appreciated.
@SITENG6 ай бұрын
Hi! I don't have a video like this and you can contact me on LinkedIn
@jphayes33703 жыл бұрын
Hi greg, keep up the great work. You have helped me understand the basics of the key skills of civil engineering. Keep it up.
@SITENG3 жыл бұрын
Thanks Jp! Happy to help :) Will be uploading the vids ones I sort my YT access. I am on holiday now and have difficulties. Lucky I can comment :)
@parwejalam94569 ай бұрын
Any vacancy your company please reply me
@SITENG9 ай бұрын
not at the minute, sorry
@mohammedrob-n7u10 ай бұрын
tell me mate how you join the main rebar of the collector beams to the core wall . thank you
@SITENG10 ай бұрын
no beams on this one, but that would be couplers mate
@mohammedrob-n7u10 ай бұрын
@@SITENG and we'll need various main rebar templates or our surveying team will be exhausted to mark those coupler positions . meaning , another lots of sheet . oh shiiit .....
@kylegreenwood3416 Жыл бұрын
Interesting video! I’ve ridden 50+ slips here in the USA and Canada. Same method, but very different equipment from what you do are using for elevator cores. Who do you rent the slip yokes, jacks, etc from?
@SITENG Жыл бұрын
That job the company owns it (JRL Group). They prepare everything off site and assembly is really quick without 'long' carpentry works. How's working in Canada and US ?
@kylegreenwood3416 Жыл бұрын
@@SITENG we use a company called Scanada for jacking equipment and build wood forms on site. I enjoy working across North America. Lots of great people working together!
@unknow-tn8fo Жыл бұрын
Why did you break up with JRL?
@SITENG Жыл бұрын
I might be back soon, who knows 😁
@thomasalem5634Ай бұрын
Thank you for sharing.
@SITENGАй бұрын
My pleasure! Thank you for the comment Tom!
@albertricohermozo442 Жыл бұрын
Good day every one i looking for job slipfoming operator ..
@SITENG Жыл бұрын
Anyone can help??
@mohammadafsar7052 жыл бұрын
I am Foreman
@SITENG2 жыл бұрын
Good! I am an engineer
@RajuKumar-wm1ix Жыл бұрын
Hii
@SITENG Жыл бұрын
Hi Raj!
@bhernonche2 жыл бұрын
Excellent video! Looking forward to your next video with interview of engineers.
@SITENG2 жыл бұрын
Thanks Bhernonche! I did not 'get them' when I was there, but definitely will try to speak with them, even if on line.
@jackullla873 жыл бұрын
Pan Jan nie pytal zebys juz zostal ? :D
@SITENG3 жыл бұрын
Ja bede pana Jana pytal czy moge jakies filmiki z jego budow robic :)
@funnyvideo7252 Жыл бұрын
sir i have knowledge about slipform and i am a civil engineer so i will get job
@SITENG Жыл бұрын
look for it, there are jobs for slipform engineers, so there shouldn't be a problem
@josephhough2112 жыл бұрын
Greg, how are you guys transferring datum’s up your cores for the slip? I’ve just been using steel tape for the jump form I’m on at the moment, only 7 levels so not massive. But interested to see how you do it for much taller elements. Seen some guys say these use vertical lazers.
@SITENG2 жыл бұрын
Hi Joseph! It's a steel tape too, but also the lasers. Slipforms on the video using the laser and shows the level all the time. I did not the ones with the laser myself, but has to be nice 😁
@agimkapidani61789 ай бұрын
Helo my friend
@SITENG9 ай бұрын
Hello 👍
@agimkapidani61789 ай бұрын
It is me on the video 🤔
@agimkapidani61789 ай бұрын
Minutes 03:34
@kabirg.c.33982 жыл бұрын
Can you please send me the name of laser used in her for slip form or link please
@SITENG2 жыл бұрын
Hi! I don't have it, sorry, you have to dig for it on net 100% you'll find it. If not come back to me :)
@govindvekariya8627 Жыл бұрын
Finishing is not good coming
@SITENG Жыл бұрын
what do you mean by that?
@govindvekariya8627 Жыл бұрын
@@SITENG sir i am also slipform technician but wall finishing not coming good
@govindvekariya8627 Жыл бұрын
Sometimes concrete stick on panel so effect on wall finishing
@SITENG Жыл бұрын
@@govindvekariya8627 yeah wall finish is not the best, but fortunately it's not that important there
@govindvekariya8627 Жыл бұрын
@@SITENG sir can you give me your email ID so i want to do something convection about slipform
@abitonphiri98333 жыл бұрын
Hi Greg, could you please tell me what ( upstands) are.
@SITENG3 жыл бұрын
Hi Abiton! the easiest way I would say it's 'small wall' few hundred mm high eg.150mm. It is used for example to 'hold' the screed and poured to the finish level height. Also used to sit something on top (windows etc) where you need structural concrete - in this case called plinths, plinth wall as well.
@نورالايمان-ف5غ7و2 жыл бұрын
design of horizontal slip form????
@SITENG2 жыл бұрын
?? did I say horizontal?
@نورالايمان-ف5غ7و2 жыл бұрын
@@SITENG sorry I am just asking if there is any available references for designing horizontal slipform
@SITENG2 жыл бұрын
I don't think there are horizontal ones. You would just pour the walls and move on ( could be done on some rail system). That's why slipform is a great idea as there are no horizontal elements taking the loads 😁
@نورالايمان-ف5غ7و2 жыл бұрын
@@SITENG I have been asked to design a horizontal slipform for a concrete tunnel
@SITENG2 жыл бұрын
@@نورالايمان-ف5غ7و check Peri solutions, they have some shutters on rails running horizontally. Still it will never work that fast , hope you will find something, or convince them to use maybe precast elements to construct the tunnel
@elmankhan4571 Жыл бұрын
If i have a civil DAE, can i get a job in england
@SITENG Жыл бұрын
You will need a work permit in UK, or a sponsorship from a UK company
@kojo87702 жыл бұрын
Hi Greg , roughly how many cubic metres gets poured daily and is this a 24hr operation ? Thanks
@SITENG2 жыл бұрын
Can't remember now TBH, but in terms of height is was often ar. 2m - I don't have the walls section area to tell you, but these were small slips. I worked before on Nova slip and couple of weeks on 100BG (the biggest one that time 😁)before I took over the basement. This one wasn't operating 24h, but there are slips like that 😁
@kojo87702 жыл бұрын
@@SITENG Thank you for answering, great informative videos
@SITENG2 жыл бұрын
@@kojo8770 Thanks! Happy you like the vids😁
@Onenesofallah2 жыл бұрын
awsum one greg
@SITENG2 жыл бұрын
Thank you! happy you like it😁
@mohammadafsar7052 жыл бұрын
I want you jobe sir
@SITENG2 жыл бұрын
Great, look for the job and get it
@onlinepg40662 жыл бұрын
How slab reinforcement joined with slip form wall ??
@SITENG2 жыл бұрын
Hi! It's there on the vid. Kwikastip is used (continuity strip/contibar - pull out bars). After the decking is ready this is first job to do - pull out the bars + do the final check if anything is missing as there might be some drill&fix needed. Then pull out bars are spliced with slab rebar. Rebar is connected and the small recess after taking rebar out in the kwikastrip quarantees good connection in terms of shear force.
@onlinepg40662 жыл бұрын
@@SITENG tq
@SITENG2 жыл бұрын
You're welcome 😁
@kevinkena9081 Жыл бұрын
100% perfect video
@SITENG Жыл бұрын
Thank you Kevin!
@habibullahabbasi26002 жыл бұрын
contecte with me
@SITENG2 жыл бұрын
Let me know please what you need, or contact me on LinkedIn 😁
@keerthanashaji34413 жыл бұрын
Wow..it’s interesting
@SITENG3 жыл бұрын
Hi Keerthana, happy you like it, hope you will join the site soon 😊
@mdafsara63632 жыл бұрын
Good work sir
@SITENG2 жыл бұрын
Thanks
@mohammadafsar7052 жыл бұрын
Good work
@SITENG2 жыл бұрын
Thank you so much 😀
@surveybook14683 жыл бұрын
Great Video 😀
@SITENG3 жыл бұрын
Thank you Survey Book :)
@Commonsense87uk2 жыл бұрын
Have you worked on jump form?
@SITENG2 жыл бұрын
Not much really 😁 A was setting a Meva jumpform in 100BG project and also Peri RCS in Alperton
@huskodgn2 жыл бұрын
👍🥾👍
@SITENG2 жыл бұрын
Thanks!
@unknow-tn8fo Жыл бұрын
How to transfer datums?
@SITENG Жыл бұрын
Use a line laser
@unknow-tn8fo Жыл бұрын
@@SITENG on the rebar? But we will loose many millimeters let's say if we have 50 stories
@unknow-tn8fo Жыл бұрын
@@SITENG i know someone are transferring with the tape measure, but is it accurate?
@SITENG Жыл бұрын
on the climbing tube, then whatever you need on the rebar - using electric tape.
@SITENG Жыл бұрын
Typically there is a good steel tape inside the core to refer to it. If you mean the tape measure that's the one you'll be using almost all the time as you will be measuring off your datums - marks on the rebar etc. Slipform is a tape measure job and it's well enough. BTW tape measure is our best friend and I have impression people want to measure every simple thing using the EDM - whatever can be checked/measured with the tape should be done with the tape :)