Small Medium Large // GepRC CineLog35 // One For Each Space

[@NickBurnsFPV]

It also comes with colored prop protection for added STYLE 😁 CineLog 35 Available from: Banggood - bit.ly/308PT4Q (Coupon "BGNickBurns" 8% off - Until 12/31/2021) GepRC Direct - bit.ly/3o9A2eF MakerFire - bit.ly/3C0bQA7 (Coupon "NickBurns" for 5% off)

[@gadgetman404]

Can you fly with lion pack what max lipo mah how long flight times Cheer's

[@dronereviewman9580]

🙂

[@NickBurnsFPV]

@@gadgetman404 any quad can use lion, as long as the cell count doesn't exceed the electronic components. I don't know what the flight time will be as I don't test every quad with lion packs. Normally only quads that are long range are designed for lion and thus I test them with lion packs.

[@slowentropy4531]

Love the part you share about catching up with neighbours, such a genuine guy Nick. Also that thing flys crazy well for what is!! Enjoy mate.

[@NickBurnsFPV]

I find myself just talking to everyone, it doesn’t always happen, but it feels natural and more like a conversation we are having rather than reading a script.

[@JKolman1234]

The 'vents' aren't designed for it to "breath" as you mentioned. They're a weight saving measure, which actually creates added noise & ever-so-slightly shorter flight time, both caused by the prop tip vortices whistling through the slots. I found that covering them with strips of tape from the inside helps with the noise, while not changing flight characteristics at all. My postal scale only reads 0.1g gradiation, and didn't even see the weight of the tape... Also VERY important to mention: The 6S version of the Cinelog35 can use 4S 3000mAh Lion batteries for a claimed cruising flight time of 20 minutes.

[@elgibro]

About using 4S 3000mAh battery, could you share if that's documented somewhere?

[@gus8378]

02:20 When I look for quads with prop guards, I just want to be able to be able to touch branches, walls, or surfaces and be able to continue flying, as what I like most is to do fast proximity flying. I don't carry action cameras and don't really care about the recordings, I really just fly for fun. I wish there were frames with lower profile prop guards to just give a little more protection without compromising too much performance.

[@nq0amark138]

Same here, I don't record much, just enjoy the flying... ;-)

[@TheEviling]

I have previously replaced screws like that with zip-ties, although that was on a Matrice 600 Pro that had the soft mound pointing down.

[@MCsCreations]

BTW, if you didn't notice, I'm a trekkie... So I love to explore! 😂

[@CopperStateAerialPhotography]

Great video, Nick! I've been looking at this drone for a while now. I like that you can really rip it and take your time as well. The plug and wire @4:33 will that work with the caddx peanut or the runcam thumb pro?

[@NickBurnsFPV]

its a 3 wire connector designed for the gopro8. It won't natively fit either of those cameras, but we can splice on a different end

[@MattsplatsGunReviews]

Just bought this so it was great to see someone fly it really hard. Thanks.

[@MarkFisch]

My top pops off on my cinelog 25… I actually wish I bought this 35 over the evoke f5 that I got. The cinewhoop is my top of flying. The f5 flys awesome but cine drones are better for me I like the safety and slower flying

[@SuperDbergman]

top pops off on my cinelog 25... try putting some thread through the holes?

[@Michael_D_show]

Been thinking about going the cinewhoop style. Flying fast is fun but really enjoy long slow cruising flights. Just need to save up to get DJI Goggles.

[@dadabooey]

That slow flight is pure joy :) i like exploration :)

[@MrSabram07]

What about putting some sort of spacer or washer between the two blue tongs of your TPU mount so they don't squeeze in like that

[@NickBurnsFPV]

sure. that might help keep the camera position.

[@gus8378]

I would love to see a stick overlay of that 180 yaw to roll spin trick at 08:46. Gonna try that on the sim.

[@NickBurnsFPV]

I don't think I have done a stick cam overlay in a good long while. Likely have to wait for spring now that I need to wear a coat outside to fly :)

[@ChrisParayno]

Love how they moved to injection molded design! Nice ripping as always.

[@JKolman1234]

Nick, post a link to that little USB dogleg adapter thing!

[@yyin88]

been waiting for your review on this quad! couldn't decide between this or a 2.5/ 3 inch freestyle quad, but I thought this cinelog 35 can do light freestyle and cine, why not. lol.

[@nq0amark138]

This was a very helpful review ! My son has gotten me into the fpv side of droning , (and yes time does fly ;-) ) and this seems like a logical choice after my time with the DJI FPV drone progression. I would feel a little more confident pushing my skill level, as I'm not a basher with my DJI drone. The DJI drone is like owning a Corvette, but I'm not going to take it to the track to race. This seems to be a good choice in stepping up my flying game without fear of trashing a $1000 drone... ;-) Great information thanks. BTW, I'm 60, and it's never too late to have some fun in this hobby !

[@ATXAirborne]

This seems pretty good. I've really been enjoying the Flywoo Cinerace20 and was curious how this would compare. My guess is the Cinelog35 would have more lifting power for a fullsize GoPro, but I was disappoitned the flight time isn't better. I can get 7:30 on the Cinerace even with a naked GoPro mounted, and it's pretty capable as far as flight characteristics. Did you get a chance to fly this one in wind? That's the one downside I've found to ducted cinewhoops.

[@headsfpv]

Freestyle lines are getting zesty! Always improving, good on ya Nick! This thing looks fun

[@electroddxful]

Great review as always Nick. 🙏👍🙏👍🙏👍

[@Reecefpv]

I'm thinking this quad is what I need. I had just got the racewhoop30 but it seems to not hover very steady for cinematic sloflo flying.

[@NickBurnsFPV]

Hovering it one of the harder things in fpv. Helis hover better with the single large prop

[@Reecefpv]

@@NickBurnsFPV yes I Kno. I typical can hold elevation pretty easy with a cinewhoop but the racewhoop30 seemed way worse

[@MrSabram07]

Wow the action cameras got a beautiful image

[@MCsCreations]

Amazing quad, Nick! Fantastic flying and review!!! 😃 A tip about TPU and screws: always use washers! 😬 Anyway, this quad remembers me a bit of those unbreakable KingKong/LDARC quads... Do you remember them? Around 2 years ago I saw they made a 4 incher like that... But seems like no one cared. Go figure. Stay safe there with your family! 🖖😊

[@cmacclel]

Bummer I thought this might finally replace my prop guarded quad the GepRC CineRun HD3 but like all the others I've tried it's seems super noisy :(

[@NickBurnsFPV]

Yep as the prop get bigger the noise db does as well…generally

[@mx118racer]

Do.u you think the prop guards material is the same as the cinelog25 and 30 . I have both them and hate the hard brittle plastic from them . ( I fitted beta95x hoops on my cinelog25 and it's huge improvement )

[@NickBurnsFPV]

It’s hard to be sure, it doesn’t feel like the same texture, the color looks more flat as well. Could be different

[@dronereviewman9580]

I need a drone like this in my life almost as bad as I need a good camera drone. I really hope my life starts getting better and I can start saving for one. Because I have not had much luck in the camera drone giveaways lol. LOVE THE CHANNEL NICK B

[@jroar123]

I'm just trying to figure out which drone to by that can give me that high angle video shot. Any suggestions?

[@NickBurnsFPV]

Sorry I don’t I understand. High angle shot? As in leaning the camera pack and flying fast?

[@jroar123]

@@NickBurnsFPV Maybe I said that incorrectly. I am looking for the right drone to shoot down on my subjects while they are walking around a pond. That sort of stuff. I already have a GoPro 10 with an anamorphic lens. The video it produces is fantastic to say the least.

[@NickBurnsFPV]

@@jroar123 oh I see. That is outside my expertise. I suspect we need something with gps to hold our position while we use the camera to point down. Pretty hard to fly with the camera pointed in a different direction of flight. I really don't know much about what is out there for that sort of thing. I would expect a dji mavic or phantom to be along the lines of what your looking for.

[@jroar123]

@@NickBurnsFPV Thanks and I think this is maybe something I will have to build myself to get it right. The anamorphic lens will capture part of the drone's propellers and that doesn't work. Thanks again!

[@AKtoTok]

Oo ya curious to see a direct comparison between the hglrc version. Great form factor for indoor outdoor with full gopro! Need one of these for cinematic shoots 🤩

[@MrCrowleyandhisdrone]

Seems steady, cool drone

[@johncarold]

Hi Nick Great video and review of the GepRC Cinelog 35 , I had thought about this one, I have a place full of trees and I love flying it. I just don't know if the Cinelog will make it through. I like how they mounted the HD camera. Yet I don't have a HD camera to use on it. Thanks again for the video and information

[@jayepps8646]

Does the usbc angle adapter work for the cinelog 25 ? As the sucks a little to reach haha

[@kalinkha]

After testing the frame on custom build can say ducts r really fragile, they seem solid but they just shutter on impact. If u crack right side u need unscrew 2 motors, but if u crack left side u need to unscrew all motors to be able replace a duct😤 i cracked both sides individually,tbh CL35 frame nothing like i hoped👎🏻👎🏻

[@NickBurnsFPV]

I fly mainly the cinelog25, which has fortunately hung together but yes the prop protection isn’t all that robust

[@JAYFPV24]

I def need a cinawhoop in my fleet love the review broham mandalooooo wit the freestyle wit the cinawhoop !!! All love !!!

[@leffler2]

Great review!

[@fpvnycdream_4197]

This or the cineLog 30 ?? Was one of them your favorite? Thanks ✌️

[@NickBurnsFPV]

for my and my use I like the cinelog25 best.

[@MarkFisch]

My biggest complaint on my cinelog 25 is the screws always get loose so good thing they give extra u will need them

[@NickBurnsFPV]

Which screws get loose? Normally geprc put blue lock tight on the screws.

[@MarkFisch]

@@NickBurnsFPV some of the screws that hold the motors. And there are these posts that have a screw on top and bottom one got really loose in the back and one in the front. I also lost a screw from one of the props. But now I check all of them after every few flights. I’m super happy with this drone so much fun to fly

[@NickBurnsFPV]

@@MarkFisch Thank you for that information. Appreciate it.

[@ididitfinallythankyou]

Very good review Nick. I'm thinking of getting this because I can put my GoPro H10 and can grow from it or maybe just the TinyGo 4K since I'm just coming from a simulator anyway.

[@NickBurnsFPV]

This will handle the weight of the gp10 better than smaller versions

[@inn0v835]

Hi Nick, found your page I’m undecided on the 30 or 35 but because I have my GoPro and want more cinematic looks I think I’m leaning towards this one thank you for that review. I have one question, as a beginner, how do you make it go smooth as you did, if I may ask? Thank you again… -Jason

[@NickBurnsFPV]

smooth flight is largely just about being smooth on the controls...practice. We can add expo to the controls to make the stick controls less sensitive.

[@letimsnami]

Hello! I want to buy Cinelog 35 and put Lion battery on it. Is it possible? Will the Cinelog 35 fly with a lithium battery? I want to deliver 3000 Lion battery. What Cinelog 35 should I buy? 4S or 6S? What exactly will Lion battery stand on? Thank you so much for the answer!

[@NickBurnsFPV]

Lion batteries are lower discharge than lipo but similar in cell size and voltage. A 4s lion and 4s lipo is the same starting voltage and thus if we buy a 4s quad we need 4s lion battery.

[@letimsnami]

@@NickBurnsFPV Good! So I can install lion battery on the Cinelog 35? And he'll fly? Thank you!

[@NickBurnsFPV]

@@letimsnami It will fly, but not like in the section of the video where I am flying more aggressive.

[@letimsnami]

@@NickBurnsFPV Thank you so much! Helped me a lot!

[@xfOL.]

hey Nick! did you received already new runcam nano4 lite? looking for image samples and can't find any

[@NickBurnsFPV]

Sorry no I don’t have that. Don’t think it’s have heard of that launching either

[@xfOL.]

@@NickBurnsFPV gotcha! it will be on a new iteration of moblite 6/7, that's why I thought you already have it 🙃

[@NickBurnsFPV]

@@xfOL. oh, I guess I must wait. No word on the new nano camera.

[@xfOL.]

@@NickBurnsFPV sorry for disinformation... at the end - it was fake news from aliexpress seller.. still nano3

[@NickBurnsFPV]

ah, that sort of thing can happen. Might have been an innocent typo.

[@MrHughQ]

How loud is it compared to the cinelog25? The 25 is great for indoors

[@NickBurnsFPV]

It might "read" less on a decibel reader, to my ear they are all nearly the same amount of "loud".

[@clazy9222]

Great video👍

[@Rood6]

Thanks for the video, informative as always!

[@longboarderebright]

hey nick micro man! what should i build with a 16x16 13a f4 stack i got?

[@NickBurnsFPV]

hmm...we could go 3s 2inch or 2s 2.5inch. Maybe a tadpole?

[@longboarderebright]

@@NickBurnsFPV annd i sold the stack this morning lol someone was quick to buy it. but thise cinelog 35 looks like a good build vs my cinesplore about 100grams lighter or so! and bigger props.. gonna build one of these if i ever need a whoopstuff

[@silentjack4446]

Cool review 👍 What is the flight time with 4s 850?!

[@NickBurnsFPV]

This is fairly dated. I believe I fly it with that battery and full flight is in the video.

[@silentjack4446]

@@NickBurnsFPV Oh sorry, ok then I will again search it. Sorry I have seen to much cinelog reviews 🙈

[@NickBurnsFPV]

@@silentjack4446 No worries. Its so challenging to remember all the quads and flights. If its not in the video I could only offer a guess which isn't reliable.

[@rfly-fpv]

I ordered CineLog 35 (sorry Protek 35 you lost my competition ;)). I'm still waiting for the UPS package. Quick question - I already have 1550 mAh and 650 mAh. Both are 90C Tattu 4S lipos. I guess without GoPo, flight time on 1550 mAh will be amazing but what about 650 mAh? Theoretically 650 mAh can give up to 58.5 Amperes (42% of what 1550 can give). Will I destroy my 650 mAh or it will just sag and there will be no permanent damage to the battery?

[@NickBurnsFPV]

voltage sag alone won't kill the battery. Sag being temporary, but if we continue to fly well below 3.5v/cell that will eventually damage the battery. I don't expect to get good punchouts on 650, it would sag before reaching the peak rpm. I suspect the flight time will be pretty short other than a smooth cruise. Maybe 1:45 or less if flying semi aggressively

[@rfly-fpv]

@@NickBurnsFPV So at the end I guess the best is to order GepRC's 1100 mAh High Voltage 4S battery... Agh, this hobby is expensive :)

[@NickBurnsFPV]

@@rfly-fpv Likely for best performance, or a similar battery. I don't suggest charging to HV, charge to standard voltage. I do this with all my multi cell HV batteries, I never charge them to HV only standard 4.2v/cell.

[@rfly-fpv]

@@NickBurnsFPV Interesting - due to safety reasons or battery life reasons? When charged to 4.2 V this battery won't be 1100 mAh anymore ;) Unfortunately it's hard to find ~1100 mAh "normal" voltage 4S lipo from brand like Tattu with the mass of ~130 grams

[@NickBurnsFPV]

@@rfly-fpv for battery life. Charging multicell batteries to HV shortens battery life. Dramatically.

[@01dimaflash]

This is the most helpful review ever! Thank you so much!

[@mci3578]

Love your review!!! Do you have a link for your 90 degree USB adapter?

[@NickBurnsFPV]

unfortunately I don't. I suspect I got it with another quad. If you go looking make sure the images show the orientation of the usb port as needed. I have adapters that are right side up and others that are the opposite.

[@UnfairFrame653]

how big in prop size do you review?

[@MCsCreations]

He did review some 4 inchers...

[@KOrnhOliO1]

3.5" is pretty much the cut off. I think he was sent a couple of 4" long range, but that's not really his cup of tea! 👍

[@gonzafpv2843]

Hello Nick. My name is Gonzalo and i live in uruguay. Thing is that in mi country i cant buy stuff out of mi country that are over 200 usd, and i also have 3 buys of 200 usd per year. I was thinking of getting the cinelog 35 performance but is over 200 usd already builded. So i dont have another alternative that assemblyn miself and buy parts separetly. I actually have the v2 googles and the dji radio(bought here in mi country luckly), so i was thinking of dji compatible version. Could you help me out with the parts that i need? also wich motors would be best if i run a non naked go pro? some bigger motorts that the build version have? i use go pro 7 black but no naked. Thanks for all your help and sorry to bother with this. Have a nice day nick,

[@NickBurnsFPV]

I suggest matching the specs of the components the built version has rather than doing something different. Bigger motors don't necessarily help with flight characteristics, they do add weight which can increase damage when crashed.

[@gingerdude94]

I have a 95xv3 , seeing this has Inspired me to dust it off.

[@mattd390]

Great video as always.

[@MarkFisch]

Btw that’s why u are one of my favorites u don’t just fly it once

[@MDanilo]

I was always wondering this but never asked you - how do your neighbors react to all that drone flying and noise, especially when you cross the fence and fly over their backyards? I'm just curious how tolerant they are :)

[@FireN2k9]

If you watched many videos, you would know that by now. He mostly flies when no one is out in their garden and he spoke with them about noise etc. He also said that he sometimes fly if some neighbours are in the pool.

[@rfly-fpv]

As always great review. I give thumbs up even before starting watching :D Any chance for Protek 35 review? I think you somehow missed it on your channel ;)

[@NickBurnsFPV]

I am not sure at this time. Weather is starting to turn.

[@MarkFisch]

I have the 25 and it’s awesome

[@BornIIfly]

Hey Nick, how are you? Was looking at the vid suggestion from KZbin when I noticed, damn that’s not Nick 🤔 🤷🏻‍♂️ You lost a lot of weight 👍 lookin‘ good. Stay safe, happy fly’n & take care 🤓😉😘

[@NickBurnsFPV]

Thank you. Yes, I have been working on reducing my weight :)

[@asrolly]

Nice bro

[@gr3yh47]

@NickBurnsFPV - i love love love your content. seriously. very helpful. one pet peeve. 'sinwhoop' lol. it's pronounced sineh-whoop as in cine-ma, cine-matic, cine-matography. :) thanks for what you do

[@gmivisualsjason3729]

Excellent

[@lalatubby4836]

hi Nick , you are losing weight really fast ! if it's your plan, then GREAT , if not , take care buddy 👍

[@NickBurnsFPV]

All part of a plan. Oddly it feels like a much longer process than it does on the videos 😁

[@ReggieRailSystems]

Way TOOOO Expensive! Nice, but beyond any doubt whatsoever it's a $200.00 ride. Sell lower price=sell in volume.

[@dreswan1]

Dji HD camera alone is $150 plus . Please let me know we’re you’d fine any HD quad at your price range?

[@ebarnard23]

😄😃

[@humblemumble1]

FUIRST!

[@KOrnhOliO1]

OK Manufacturers, these appear to be the best 3 sizes of Cinewhoops. Please, PLEEZE! Let this be it and quit releasing anymore of this type of boring quad! 😩 STOP 🛑, WE HAVE ENOUGH CINEWHOOPS! STOP 🛑 !!!! 😳🙄 You've released 4 bizillion of these boring, slow flying, barges, and now these 3 sizes are out and work well for cruising, ripping, and recording smooth video. 👍 Now, PLEEZE move on to making something that brings back the ADRENALINE RUSH of FPV! Innovate and make some new RIPPERS! Work on getting the weight down on Naked Caddx Vista Whoops - that's a category that NONE OF YOU have worked on releasing a lower weight digital whoop than the BetaFPV 75X digital. Push the envelope on that category! Push it on naked Vista Toothpicks! Or, something else or new? Just give us a friggin' break on the barge that is the Cinewhoop! We've already got way, Way, WAY to many of those barges to choose from! "WE'RE BORED WITH BARGES!" 😎🤘