Smart-Hayabusa: this is how I changed my wheels bolt pattern from 5 to 4 holes, NO SPACERS!

[@normandyck7609]

I enjoy your projects and your humour with your love of what you are doing. Please keep creating more videos.

[@VinyB57]

Normand, firt thank you, I you can be sure I'll continue making videos, I love it!

[@stancefraternity2641]

Ever thought of trying a paddle shift system and installing a quick shifter

[@VinyB57]

Oh....maybe it will be the next update...🤩

[@AustinCoulson]

I can't wait for the new project! I do feel bad for the cat that kept getting hit with stuff tho...

[@VinyB57]

Hey that's my garage pet! Don't know how it survived in such cold conditions! 🥶

[@kevyriverside8082]

This is why i love youtube. Its guys like you

[@vincelamarche9686]

Hello! I have been watching all your videos as I lay in my hospital bed, it's helping me stay sane! I have been around a few cars that had motorcycle engine conversions and yours is very well done! Only thing I can think of that you might want to look into is getting a oil pan with the swinging pickup. In a bike they rely on the bike leaning for the oil system to work properly, in a car the engine stays flat and the oil does not go where it is needed so the flat pan with the swinging pickup fixes that. I have had to repair a couple engines that ran dry from tracks with big corners like Willow Springs in California. Also the output shaft is the weak spot of the Hayabusa. With the added weight of the car and sticky big tires they can snap and most of the time they will take out the case and water pump. There are a few places that make billet shafts that work well. Personally I have broke a couple stock ones on motorcycles when I put real sticky tires on to go racing. I might have missed it but the clutch slave cylinder that mounts on the sprocket cover is another weak spot. Anything more than stock springs in the clutch will make the cover break. A aftermarket cover is a must, or at a minimum a support can be made. They sell one on a couple of the places like APE and Shintz but you can whip one up pretty easy. *edit* went back and saw where the cover broke when bleeding the system, that will happen again without a support or billet cover. Great Project! Enjoyed the videos very much.

[@jtto6364]

That new tool works incredible. Hammer time ASMR

[@michelst-amant6105]

Salut Viny même si je sais que tu n’auras sûrement jamais le temps de lire ceci, sache que j’aime énormément ce genre de clips, mais car il y a toujours un mais je ne comprends pas un seul foutu mots d’anglais et lorsque tu t’ai mis a dire t’es petite frustrations en franglais Québécois pure laine chu tomber sur le cul mon cerveau c’est mis à jouir car mes synapses ont baissé mes neurones tellement j’étais agréablement content de t’entendre même si ce n’est qu’une fois à toutes les 20 minutes. Anyway et vais te suivre maintenant que je t’es découvert avec l’espoir qu’un jour tu feras tes clips supertreepent dans les deux langues. Pop’s un citoyen bien ordinaire bien content d’être tombé sur toi et WOW pour t’es projet tu ait vraiment très habile de tes dix doigts et entre tes deux oreilles merci pour ce vent de fraîcheur.

[@VinyB57]

Merci mon Pop!!! Un jour je ferais pt une version francaise...un jour peut etre 🤷‍♂️

[@Torques_moto]

Loved the workflow on this project, really enjoyable to see each problem solved.

[@timd1191]

The new project looks fun!

[@VinyB57]

Thanks tim! Sure is a lot of work! 😅

[@andrzejw2223]

Viny, If you want to remove the VW cv joint from the shaft and you have version with the screws (not apply to nut ones) you can do it without hammer. When you remove the cv axle use same screw that is used to assemble the cv joint and tighten it to end - cv joint should jump off :) voila. Great content!

[@VinyB57]

Ok thanks Andrzej

[@tonyestvik7969]

Yo bro, u r nuts! Just so you know my Seat Arosa has the 4x100 boltpattern! Same as VW lupo and Polo before 2002, i think it was! But your skills are wounderful, and your machine park also in your "small" garage! And you have now, loasted it, do want to be a astronaut.... they have the thing you routate 360⁰ its own axel... have you tryid it, I cant even look at it whitout getting "sick"- barff... porslinbus.... So nice to see you again, realy good job, and good camera work, you sould be a great TV host for a car canal!

[@VinyB57]

Hey thanks Tony! I'm building the thing, so I'm fart from testing it, but I keep you updated with maybe 1 or 2 videos on the built!

[@pymracing]

Great Job Viny ! Can’t wait to see it back at the track !

[@VinyB57]

Is that the famous, brand new ''PYM Racing'' channel, commenting on my videos! I'm honored and subscribed! 😉 Again, thanks for the wheels!

[@gafrers]

245 all round. Grip monster and maybe a little heavy steering in slow corners. 04:27 Garage54 🤣🤣 Looking forward to the jump gimbal-crane thing build

[@AlanDavid1955]

Great job Viny !!

[@VinyB57]

thanks Alan!

[@joblo24]

tres beau travail ! lache pas, content de voir des quebecois qui performe bien et qui font du bon travail ! j'espere te voir a napierville ou a Icar cette été avec le smart-busa !

[@VinyB57]

Hey merci! J'espère bien aller au moins une fois à Icar cette année!

[@AlexandreBoutin-to4hd]

See you at Sanair next summer!

[@htownblue11]

Viny, I think your channel is growing in subs if I remember correctly. You’re channel is fun, funny, and we can even learn a thing or two. And I agree with the 4x100 is a good option as I use them on my cart projects for wider wheels.

[@VinyB57]

Hey TJ! Yep, the channel is growing slowly...but I'm getting there!

[@philpunxsutawney9411]

Hi Viny, good work as always ! You should ask your friend to try his 225 tires before going to 245. I think you'll have too much tire for the weight/downforce of your car. 245 will take forever to heat. I'm also concern that all the extra grip will also cost you a lot on the straights... YES you can have too much tire on a race car !

[@VinyB57]

Hey Phil! I get your point! But I'm planning on getting really aggressive aeros on the future for this car, for getting heat into the tires, it won't be a problem....but that's gonna be after the turbo. So maybe this summer, without aeros and motor HP, I'll struggled with tire temp...will see!

[@keithviolette5870]

Another awesome video Viny! Love the idea of the next project - I guess I was really close with my guess of a Kuka rollercoaster! What a fun design! I suspect that the cylinder counterweight is a water filled barrel that can easily be adjusted for the person (victim) attached to the end of the arm? Another barrel on the trailer with a pump to transfer the water would make for an easily adjustable counterweight. You have a fun sense of humor and your accent is great, eh?

[@VinyB57]

Hey Keith, you were the closest with your guess of the arm robot BUT, you re completely out of the track with the barril of water...simply cause during winter in Canada, water freezes 🤣 But seriously, good guess with the barril, Im gonna used bags of rocks, that I can removed and add

[@keithviolette5870]

@@VinyB57 Good point about the freezing water... I'm in New Hampshire and we have similar winter weather around here. You could use antifreeze though, but that would take quite a bit.

[@sazafrass]

5:40 I might be dumb but I thought you were talking about the main hole thingy and had no idea what was going on with the lines. My smooth brain took forever to figure out your were talking about the hole pattern position.

[@VinyB57]

At least you undersood it one point! 😅

[@bikeymikey748]

Love your work/vids. De plus…un autre Québéquois! Too cool.

[@VinyB57]

Merci Mikey! 🤙

[@MrOnlydrift]

yop sly viny pour note 4x100 est aussi utilisé sur les ancienne vw type golf 2 et 3 ou les polo 6n et ibiza équivalentes

[@VinyB57]

Ouin, comme j ai pris mes pièces dans un cours a scrap, les bagoles post 2000 sont assez rare, mais le jour que ferais un autre projet similaire, j m en souviendrais 👌

[@Tarry_Plaguer]

I like the new project, it looks like a lot of fun. One problem that I noticed right away though. If the counterweight is to heavy and it lifts you up, how do you get down? And, how do you pull it down to attach the harness in the first place? Looking at your diagram I think I see what looks like a giant pully, so maybe some sort of rope is used to pull yourself down and adjust the balance point? Anyway, it looks like it will be a blast. I seem to remember seeing something like this in old OMSI or NASA videos for getting used to zero G. Will be a fun build. How long is that arm, and will it clear the vehicle that is towing the trailer, without banging into low bridges? 🤔

[@VinyB57]

Ah! you have too many good questions! I didn't wanted to fully explain the next big project, but simply, too lower a person, there's a boat crane at the bottom. The arm is 33' long and it's fold into 2 parts for '' transport'', not that I want to move or rent the thing, but at least to be able to put it somewhere on my property, out of the view of the neighbors. And yes, it goes under bridges, again, not that I want to tour with it...but just in case I got to move it to a new property or something....yep, too many good questiions..😅👌

[@hothotllywood4192]

J'attends de te voir catapulté :D Pour le reste, cette vidéo était super intéressante. Merci !

[@VinyB57]

🤣🤣🤣 Good one! Hope not! 🤦‍♂️

[@peterfarkas6763]

Great content! But there was no need to weld up the brake discs the holes don't do anything but allow the bolts to pass trough. The wheels clamp them in place and the load is transferred trough the surface friction.

[@rvnsfllh4552]

hey viny, i just subsribed your channel because all of your great work, i wish you can make custom center exit exhaust because it would be cool i think!

[@VinyB57]

Might be the case, once I turbored the Smart...I agree it would look awesome!

[@Deckzwabber]

I would have thought there's a huge market for aftermarket VW parts. Maybe not so much in North America

[@VinyB57]

Yep, I also think Europe should have a better market for VW, that what we have!

[@KnownSender1]

Great video man 💯👍

[@VinyB57]

For more than 3 years you've been following my jurney! Thanks buddy, really appreciate! 👌

[@KnownSender1]

@Viny B just glad to be apart of it 💯

[@marcmigneault8364]

Vidéo intéressante comme d’habitude. Mais je crains qu’au poids de la Smart, tu n’arrive pas à monter à monter des AR-1 en 245 de large dans la plage de température à laquelle ils doivent être utilisés. Il faudrait vérifier avec un pyromètre, mais un 205/50-15 serait peut-être préférable. Par exemple un RE-71RS si tu veux continuer de rouler avec un pneu DOT. Lâche pas!

[@VinyB57]

Salut Marc, tu es le 2ie a me faire le commentaire, je crois que je vais l essayer et voir ce que ca donne et je vais garder un oeil aiguisé sur ce dossier! Comme je veux fabriquer des kits aéro assez agressif poir le smart(mais apres le turbo) je pense que faire chauffer les pneus dans cette condition sera plus facile, plein de belle chose à développer! 🤦‍♂️

[@matthewpeterson3329]

Well, we are knocking on April. Did your new wheels arrive?

[@VinyB57]

Oh yes! i'm gettin git this week-end! 😍

[@sherlock_backs]

@@VinyB57 Any updates dude!!

[@Ethio_tender]

Where is the Test drive ?

[@VinyB57]

Next summer! 🤦‍♂️😉

[@AlanDavid1955]

Hey Viny , could you give me a part name and number for your throttle cable , the one I have is to hard to push ! Thanks again Alan

[@VinyB57]

Try these: www.amazon.ca/gp/product/B097SYXKK3/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

[@powerman1955]

Sweet! You seriously need some kind of heat in your shop, every time I saw your face I could see your breath. You are one tough Canuk for sure!

[@VinyB57]

I know, you're right! one day I'll pay my self such a luxury! 😅

[@powerman1955]

@@VinyB57 if anyone deserves it, it's you my man!

[@Josfab11]

Salut , si jamais tu veux un set de roue avec pneu hoosier A7 , jai des rim 13x9 dans le 4x100 avec les pneu 255/40ZR13 . Je peut te faite un tres tres bon deal ! Toute est neuf ! Il etais sur ma mini hayabusa rwd mais jamais rouler encore

[@VinyB57]

J'avais aussi pensé avoir de plus petites roues que des 15'', mais les calipers sont ''énormes'' (pour un smart) et ils passent juste bien dans du 15''. J'imagine que du 14'' si le mags, est assez ''slim'' ca passerait aussi, mais impossible avec du 13''! Mais merci quand même pour l'offre! à la place, tu devrais rouler ton Mini! J'aimerais bien voir ça!

[@Josfab11]

Moi je roule un big brake kit de Miata et le caliper fit tres bien

[@r0b3rt404]

New video yeeeeeeee

[@VinyB57]

Yep! 😬 I knw I don't produce a lot of those (sorry)...but I put a sh*t ton of hours into them! 😉

[@aelo93]

My mk2 gti has a 4x100 and 2002 transmission and engine out of Jetta wonder if it's helping

[@VinyB57]

Not really...I'm kinda done with the change! 😅

[@rjung_ch]

👍💪✌

[@VinyB57]

Hey Robert! 🤙

[@hollandduck79]

hello from the Netherlands . Viny have you ever heard of the Dutch Master Milo? on the werkplaats vlog kanaal ( = workshop vlog channel ) he is now making a car swing where a VW Golf will have to swing over the head on an 11 meter high swing. but in the meantime until the whole construction where the car gets stuck, he has hung a person swing on it and has already swung it over the head a few times at 11 meters. maybe it will interest you. oh yes he also restored an original tank of Saddam Hussein haha thanks for the video Viny . Sincerely Hollandduck

[@clintmcgauley9211]

That's funny, it actually is Tuesday today.

[@jefff6884]

Please paint or wrap this like a Lil Tykes Cozy coupe car!

[@VinyB57]

🤦‍♂️ not really...

[@wojtekja1980]

but the old wheels 5x112 are connected with only 4 screw now.

[@htownblue11]

He’s only using them to load and unload from a trailer though. Very low speed and no side loads.

[@wojtekja1980]

@@htownblue11 i know, i know. 👍

[@VinyB57]

I might also do burnouts with them 😬! But for sure NO RACING!

[@wojtekja1980]

@@VinyB57 😍😍 but record it for us 👍

[@danielburgin1060]

Love this channel just wish you was faster at releasing content lol

[@VinyB57]

Hey thanks Dan, yeah, I know, I m still working full time...so it s kinda hard to do faster 😅 But I m still looking to find solutions tho! 🤷‍♂️

[@danielburgin1060]

@@VinyB57 cool keep up the awsome content

[@magnus2025]

If I were you (which I'm not.....) next time I'd go for 1x1 (?) wheel patterns :)

[@VinyB57]

If I could find affordable 1x1 wheels..you bet, I'll be changing for that pattern! 😉😎

[@SideshowBen206]

All Hail the Algorithm 🙌

[@letecitanjir2039]

old vw golf 2 jetta have 4x100

[@VinyB57]

You're right! But I'm using 2007 parts...

[@mpsimonful]

good job Viny, dommage que tes vidéos soient si rares......😒😒🤷‍♂🤷‍♂

[@VinyB57]

Hey merci Mike! Je sais, ils sont rares, car je travaille tjrs temps plein et que je mets entre 30 a 40hr par video 😳..donc si en plus on calcul le temps de fabrication...tu comprend que je fais juste travailler 😅 Mais je suis content que tu les apprécies! Leur rareté les rend encore plus spécial, j imagine 🤔🤦‍♂️🤣

[@mpsimonful]

@@VinyB57 hello cousin.... je comprends mieux maintenant, continu comme ça . c'est top !

[@VinyB57]

@@mpsimonful merci! ✌

[@SideshowBen206]

All Hail the Algorithm 🙌