Smelting Jeff William's Secret Gold

Surprise! I had one more bag of @Askjeffwilliams super rich high grade gold ore! Jeff's ore has been hiding secret gold and I FOUND IT! Check out how I smelt down and refine his gold as well as an experiment to determine the best way to clean gold in quartz specimens
AFFILIATE LINKS
What's an affiliate link? If you use our link to buy something, MBMM gets a small percentage of the money you spend. This DOES NOT mean you will spend more money using our link, you will spend the SAME AMOUNT of money while also supporting a small business and channel.
Filming Equipment:
Samsung Galaxy 22 Ultra: amzn.to/3ol4nuM
Long tripod: amzn.to/3WpKWgW
Short tripod: amzn.to/3IVYdZl
Complete Smelting Kits:
Complete smelting furnace kit: amzn.to/3WdvHHS
Cupelling furnace: amzn.to/42ZOWXV
Fluxes:
Chapman’s flux: amzn.to/3Of4JO0
Anhydrous borax: 1lb amzn.to/3M6EhUh 5lbs amzn.to/3pLRx9i
Silica sand: amzn.to/3Mv0TiG
Soda ash: 1lb amzn.to/41Ctg2N 5lbs amzn.to/3BtrhDg 50lbs amzn.to/3oaI6Qf
Lye: amzn.to/3Mx8OvD
Litharge: amzn.to/3OhtHwi
Lead: amzn.to/3MARq9t
Smelting Supplies:
Crucibles: #4 amzn.to/3M92QQk 10# amzn.to/42XIsIY fire clay amzn.to/42K3laN
Cupel: amzn.to/437F8L6
Electric furnace: amzn.to/430C6cd
Tongs: amzn.to/3BB2dKp
Heat safe gloves: amzn.to/41MxMeQ
Gold pans: amzn.to/3pRIzra
Gold screens: amzn.to/3pTjo7j
Scales: 0.01 amzn.to/3BB2FZ7 0.001 amzn.to/438NrXh
Magnets: amzn.to/42MFLde
Pan for roasting sulfides: amzn.to/3pNGQTN
Respirator: amzn.to/3IqbclD
Microscope for phone: amzn.to/3OsAdQM
Furnace Building Supplies:
Kaowool: 2” x 12.5’: amzn.to/3BB9IRO 1” x 25” amzn.to/3Wd7ktO
Water glass (sealant): amzn.to/45desuv
Fire bricks: amzn.to/3Ogx86v
Shop vac: amzn.to/434rOXV
Propane: amzn.to/3pTj60d
Propane regulator and burner: amzn.to/3pG4p0w
Refractory cement: amzn.to/3Ok75ex
Underground Mining Equipment:
Hard hat with light clip: amzn.to/3Iss7nL
Head lamp for hard hat: amzn.to/433G5US
Hammer drill: amzn.to/3ofHFUM
Hammer drill bits: amzn.to/3MjLf8A
Safety glasses: amzn.to/439w8Fo
Gloves: amzn.to/45ceXoF
Feather and wedge set: amzn.to/3Om1kNz
Respirator: amzn.to/3IqbclD
For more info please email or call:
Email: [e-mail]
Phone: [phone]
Website: www.mbmmllc.com/
Patreon: / mbmmllc
Facebook: / mbmmllc
Instagram: / mbmmllc
Twitter: / mbmmllc

[@Askjeffwilliams]

that was some great info Jason ...... will have to use the Sulfuric acid for specimen clean up next time we get more Gold from our mine....... you are right ....every ore is different and not one way will work for them all.....would love to see a video of you parting the silver out of the buttons. Thanks for coming out to our mine and making it one for the books,. See ya soon and take care.

[@chaz2785]

Check out SREETIPS on KZbin for info on chemical gold refining. Very useful information 👌

[@signsofthetimes2971]

​@@chaz2785 it would be very cool to see sreetips finish those buttons off.

[@chaz2785]

@@signsofthetimes2971 yup sure would!

[@Arachnos27]

@@chaz2785 love sreetips

[@coreymerrill3257]

I know of one dude who uses a continuity detector to see if the gold veins are connected to each other in the rock . If they are, he sandblasts and acid treats to get the specimen on matrix.

[@g-dcomplex1609]

jason, you absolutely right about trial and error in regards to learning the craft, and teaching the craft as well, even though i have 13 years experience under my belt, i'm still learning and watch your videos to learn even more, your work is appreciated, regards

[@aaronstewart3570]

When he's not repeating the Slave Book rubbish and observes things... Then records what he finds. He mainly just repeats the crap he learned. Nothing more. Copy and repeating aren't improving anything. Just making you all blind and stupid to stuff you ignore.

[@mrgreenswelding2853]

It's good to see you do all these experiments, as lots of people don't have the money or resources to get everything to do them. Thanks to you and all involved!

[@patbrown5168]

It has been great to follow your work with Jeff's Ore. As an old retired engineer, it never gets old to see what the slag will look like on the different ores and different flux recipes.

[@ericclayton6287]

If you’re dealing with quartz matrix you’ll have to use hydroflouric acid. It dissolves quartz but is nasty and dangerous to work with. It also dissolves glass.

[@lotharschiese8559]

Don't play with hydrofluoric acid, commonly used in pharmaceutical antidepressant medication fluoxetine (Prozac) and the material PTFE (Teflon).

[@ericclayton6287]

I agree with Lothar but it is commonly used in mineralogical specimen preparation to dissolve guartz matrix around specimen gold and the rare showing of Pt. Pt almost never occurs in non ultramafic rock hence rarely associated with quartz.

[@fredfarquar8301]

I once had a quartz-and-gold nugget just under 1/4 oz; I placed it into a bottle of HF (Hydrofluoric acid) for several weeks. All the quartz was eaten up and left a beautiful gleaming gold nugget with tiny spires where it had penetrated the quartz. Even though the final weight of the gold was just a little less than 1/8 oz, I sold it for the price of 1/4 oz because it looked so nice. But yes, HF is nothing to fool with. Get it on your skin, and not only will you NOT feel any pain, it will continue to react with fat, muscle, and bone. People who have spilled it on themselves have had to had limbs amputated because the flesh and bone is dead and gangrene sets in. Unlike other acids or strong bases, it never lets you know when or what it is destroying until it’s too late.

[@danvigue2238]

sounds like this method should only be used in lab setting.....

[@ericclayton6287]

Knowledge or research and due caution and lab skills are much more important than setting. In other words don’t be stupid. No hold my beer and watch this. There are numerous chemicals that for safeties sake need to be used in a fume hood for instance.

[@TheMilwaukieDan]

This is exactly what I appreciate your work Jason…. It’s real learning and evaluation in process. Thank you for the honesty of the learning process.

[@EvilKFC]

The type of cleaner you use depends on your ore type. Sulfuric acid is a strong oxidizing acid while muriatic/hydrochloric is just a strong acid and vinegar is just a dilute acetic acid. Your standard bleach is a weaker base than sodium hydroxide. Some metals will complex with hydroxides and redissolve or the hydroxide interrupts the passivation layer so that the sub-material can be oxidized. Sodium hydroxide is also one of the few things that can dissolve glass and by extension quartz. Side note, a lot of chloride compounds end up being a yellowish to green. My guess is when you exposed the sample from the muriatic to air, you were getting some additional oxidizing of the surface that had become passivated creating a mineral that was green. Hydrogen peroxide is also a strong oxidizer but it’s also unstable. So if there was a mineral in the ore that worked like a catalyst, you’ll get a lot of oxygen formation as the peroxide breaks down, but no real progress is made. Long story short, based on the results you have, my guess is that the ore needs additional oxidizing. First try swapping your sulfuric and Drano samples a couple of times to see if they work together to take away the unwanted material. If that doesn’t make much difference, I would try a stronger oxidizing acid like nitric. Even though you have the materials, I would advise against Caro’s acid, there’s a reason why they call it piranha solution in the lab environment.

[@tzimmermann]

If I'm not mistaken, sufluric acid is a strong oxidizer only in concentrated form. In dilute aqueous solutions it dissociates, and can't form sulfurous acid and nascent oxygen (which is the actual oxidizer). It looks like he's using a concentrated solution as it comes from drain cleaner though, so I guess you're right.

[@jakuborvos1575]

HCL alone cannot dissolve gold, but if you have some oxidized manganese oxides in the ore, you can make chlorine in the juice and actually dissolve gold.

[@EvilKFC]

@Terrence You are correct that sulfuric is a strong oxidizing acid. I think there’s some additional uses in this case (like the swapping between acid and base). A couple things to note when working with sulfuric acid: There are inhibitors in drain cleaning sulfuric acids so that it doesn’t dissolve your pipes, that has me wondering if they’re at work here. You do need some water to dissolve any salts that form, which is why you typically don’t see fuming acids used very often (besides their other dangerous side effects). Lastly, most sulfate salts aren’t very soluble and sulfuric acid is used in high purity gold refining to drop out heavy metals, which might be decreasing its effectiveness here. I’m curious about nitric acid as all nitrate salts are soluble. One thing I left out in my original comment is that you should start with dilute solutions of nitric acid as I believe it can dissolve or create a fine dispersion of your gold if the karat is low.

[@aaronstewart3570]

Take your time. It's not at all Rare for a professional REE fossicker Like myself to sit a bucket in multiple Natural chemicals for months. These morons are in a hurry to lose heaps so they rush like fools would. Hence the so small amounts they get. Facts. But the re-tards called me crazy...??? lmao, Autistic isn't crazy. It makes me a genius in my specialized field. Earth.

[@aaronstewart3570]

@@jakuborvos1575 I use that, the gold runs out with the water. There is a mix of 3 natural chemicals that do the same but takes longer. I discovered it. Less toxic.

[@keithwood6459]

To keep it from turning green you need to neutralize the muriatic acid in the specimen by rinsing and putting in a solution with baking soda. Should neutralize all of them with appropriate agents.

[@OpalholicsAnonymous]

His poor fingers

[@haphazard1342]

He probably just rinsed with water, which would be enough to protect from burns but isn't enough to fully neutralize the acid in the rough rock surface.

[@stevezozuk9622]

What a great opportunity that was for both of you . Thank you for taking us along on the original journey , that brought you to this end result , I love watching you do your thing . Especially for the convection cells that always trap my eyes into watching the formations . Great job Jason , see you soon . Cheers

[@Boosted98gsx]

You really should spray some rigidizer on that exposed Kaowool. Those fibers get torn and blown around your shop when you fire your crucible, and can do some severe damage to your lungs.

[@lerkzor]

It seems to me that a good method would be to combine mechanical methods (grinding / smelting) with chemical methods. Once you smelt and get all the metals into a cone, you could use pure chemistry. Nitric acid will dissolve all the copper, lead, silver, and perhaps other metals leaving the gold (and perhaps platinum group metals) behind as solids. Then using aqua regia (hydrochloric plus nitric) you can put the gold and PGMs in suspension. Adding a few drops of sulfuric acid will precipitate the lead, and after filtering you can use sodium metabisulfate (SMB) to precipitate the pure gold. If you are interested in getting into the chemistry side of things, pretty much the entirety of my armchair-expert knowledge comes from sreetips channel here on youtube. I enjoyed watching your video, what are you planning for next time?

[@markpashia7067]

I was also going to suggest sreetips possibly as another joint venture with these guys. Jeff dig it, Jason smelt it to a cone, and sreetips to chemically sort the metals out. Would be fun video series for all.

[@lordeverybody872]

@sreetips is imho the best at separating precious metals. At least on yt

[@UtmostOutdoors]

Thanks for sharing your experiments Jason! I'm really enjoying learning about smelting and hard rock mining, both things I've never done! Keep up the good work!

[@markg454]

Your experiments are worthy of the effort. I learn so much from your trials and errors. Keep them coming. We really get excited when we receive a notification of a new video.

[@nsa_surveillance_orb-42b]

I love your investigatory methods, and lessons learned, very insightful. See, that right there is an issue I now know how to resolve, or begin to resolve. Loved the specimen cleanup with all the chemical varieties, learned all kinds of stuff. Keep up the good work, loved the cooperative work with Jeff and all, but love your channel all on its own as well. Keep it up!

[@EeekItsSnek]

I still can't get over how good of a sample those are. Huge specimens! Even for a hard rock mine, for today's day those are some beautiful specimens. Great stuff!

[@Hawkeye2001]

It's been a LONG time since High School Chemistry (50 years). I'm enjoying the process, even if I'm rusty on all the chemicals and their reactions. The failures are just as important and educational. Thanks.

[@Schismarch]

Really cool process. I love that you share the mistakes and what you learn. Looks like great fun!

[@rideshareafterdark5827]

A piece of cardboard will prevent the crucible sticking to the firebrick. Learned that one on Bigstacked's channel. :-)

[@jbowerman50]

Always interesting, wish I knew more about the chemistry end of what you do. I'm constantly researching something and just dont have enough megabytes left to fit much more in my cranium right now. But I'll get there, before I need to do my own smelting. Thanks Jason

[@jeremywalker210]

I love the experimenting and problem solving. And the explanation for each process. I understand the learning and your always open to suggestions. Love watching especially after a long day at work.

[@hasmeadali7316]

Thanks for the update.. I was actually waiting for it .. Much appreciated 👍😎

[@ziegemitfahrer5277]

Definitely sodium hydroxide/caustic soda/lye (all the same thing) works, but you need to BOIL it. If you get a speci with multiple shows of gold, test it with a multimeter to see if one show connects to another show. This give you an idea if it's something nice worth dissolving or it gets chucked in the crush bucket. Stick your speci in a zinc pot and bury it in lye. Slightly dampen the lye with water to make it boil easier. Boil it for an hour(ish) and the quartz will be gone. If you're lucky, you'll get a pristine nuggy or at least a much more attractive speci.

[@akakscase]

A trick that I found works well for stopping crucibles from sticking is putting a piece of cardboard or poster board under the crucible when firing it. The resulting ash creates a non-stick layer under the crucible.

[@TechGorilla1987]

I remember that Applied Science used something similar when he made glass in his tabletop furnace.

[@erich9244]

Awesome info Jason! Great experiments I love watching even if it "fails" Keep on keeping on.

[@StephenBecker]

Give oxalic acid a try! I've used it to clean iron oxides off of quartz points before, worked great....everything was completely white/clear when it came out after an extended soak.

[@walterszarek2748]

isnt that sold as wood bleach?

[@kebin760]

Gave you a like because you are not afraid to fail. Love all your videos! Keep it up!

[@user-pe6cx4sw8r]

Very Informative to acquire for beginner thank you I'm learning so much the videos from Jeff ,Dan Chris and yourself thank all

[@JimFinlayson]

Jason, thanks for sharing your investigations. I have to say I really enjoy watching the slag freeze in the cone mold. I suggest a super slo mo of that in the future as a short. Keep the videos coming. They are some of my favorites.

[@rodneyhaley1734]

Wow what a great result I learnt heaps from you and Jeff Williams who I’ve been watching for a few years now

[@kencarbon2346]

enjoyed watching your video great work nice to see you try different methods of bring out the best specsmains of gold. I glad to see your explanation and experience and excitement working with gold ore.🤗

[@busbey61]

Jason, you and Sreetips are very informative! I think a collab series with you and him using both of your methods would be beneficial for sure!

[@calebfast8088]

I needed this exact video! Thank you! Love this channel. :) Been prepping to hit some of my own ore and trying to figure out what chemical is cheapest and easiest.

[@danwells3401]

Hi Jason, Great video thanks! I've cleaned up a few specimens with acid and you really have to scrub them with warm water to get any acid residue off, to prevent yellow discolouration, soaking in a cup of water for 24 hours afterwards also helps!

[@ProspectorTripp]

Nice work Jason. I’m getting ready for some testing using pay dirt (high grade sample) I want to do exactly what you did to see if I recover additional gold by smelting the entire sample vs sluice running and panning. Thanks much sir! ✌️PT

[@alexnutu1125]

So awesome so informative and just badass! Loved seeing y’all work together

[@raydowdy6914]

Awesome video guys. Really enjoyed every second of it.

[@Mdwells2944]

Live these videos, really neat to see the processes.

[@jeeplove_8831]

Hey Jason, awesome work!! When using Muriatic Acid, it works much better 1:3 Muriatic: Hydrogen Peroxide (normal 3%). Muriatic also needs to be at room temperature (around 70°) to work efficiently. During the etching process, get a tooth brush or scrub brush, and brush each sample every now and then with hydrogen peroxide to remove the sediment it etched off, then put your sample back into the stainless steel bowl full of 1:3 solution (plastic will melt). This will give a new clean surface for the acid to keep working effectiently. The reason it turned green is possibly because it wasn't neutralized well enough. Neutralize it by letting your samples soak in a baking soda/water mixture or Windex (blue window cleaner) for at least 30mins. I love following your channel, keep up the amazing content!!! 🙏

[@f.k.burnham8491]

Jason: I really find your videos quite interesting and educational. Thank You for making them.

[@jackmclane1826]

You can put in old cupels with some charcoal to new smelts whenever you would add lead as collector metal. A great inline recycling method beneficial on many points. No waste to take care of, no additional lead needed, saves money, time, labor... awesome!

[@SilverScorpion]

Super video. I would love to see it done both ways with the same sample to see which way is the best recovery. Thank you for doing this video

[@dizzious]

Duuude! I love the Pb/kno3 method. Such a time saver. Cupelling takes forever.

[@kurtbogle2973]

I like your attitude. Honest and truthful. I'm more intrested in understanding how things are done myself.

[@ghostrider82599]

Youre so good at this. I always watch your vids. thanks!

[@prodigalselect2421]

Awesome work you guys have shared with all of us! Colorado here and thank you for the videos. I appreciate you guys. I could definitely use a small scale shaker system from you guys.😯

[@coloradopatriotbaker3069]

Colorado here too

[@hot_coldman]

Always fascinating to watch. We're so used to seeing the final product when it comes to gold. I would best most people think gold just pops out of the ground 100% pure and smelted.

[@christopherfritz.bigsaving]

Ain't that the truth. I couldn't tell you how long I was even begining to think I was crazy. Or my eyes /ears /hands/nose/ and tongue/ were just plain off or different than every ones. Cause I'd see it in the rocks and feel it. Sense it with all of the senses and people I'd show wouldn't do anything but glance and say. You got gold fever. There ain't no gold in there. And at first I'd argue and most of them really didn't believe there was any gold in the rocks. But then one day it clicked. There ain't no gold in any rock. There ain't no gold in trees. There ain't no gold in water and there definitely ain't no gold your shit there ain't no gold in anything. So I should have just gave up looking I suppose. Lol. Report via comment next week with some that has gold in it though 🤪

[@joenewman6939]

Good job on the close up shots perfect detail 👌

[@ericbruns888]

Great experience thanks J.

[@shaun4443]

Love watching these, thanks!

[@matthewmartinez1091]

Your videos are very informative you're smelting of sulfides has helped me very much as well as the dissolving of high grade iron ore to get to the gold. In one of your videos you used potassium nitrate as an oxidizer so I figured 🤔 high nitrate fertilizer would work the same and it did appreciate the info. Someday I'll have a way to thank you I have some major things in the works😁.

[@gromageindustries6745]

Wow I love your passion, tenacity and perseverance. Very engaging, well done fella. You inspired me to buy a gold pan to try my luck in some streams around my house in West Wales. I'll let you know how I get on. Good luck and all the best 🙏

[@michiganprospectors]

I like how you share both your success and your mistakes on video. I have a larger, DIY channel where I often show my mistakes or ask questions and get help from my viewers. We can all learn together this way.

[@marsautoman]

Always enjoy your experiments.

[@surfinsilver]

I'm looking forward to seeing the yield from this 😊, great video as always

[@talldave1000]

Jason. not many people would show a failed experiment so i commend your honesty and integrity. Everybody makes mistakes. Anyway, you fixed them and pressed on. Great job and great video

[@TheFrog767]

Thanks for the hard work and information sharing 🖖👏👏👏🥂

[@Mikkelltheimmortal]

There's an old saying that goes "a wise man learns from other's mistakes, a fool learns from their own. So let me be your fool."

[@jeffreyallen3796]

Nice Jason. I enjoy the videos and experiments.

[@BillMulholland1]

Was looking forward to this. Thanks Jason 🤝🍻👍

[@auguys]

Hey Jason been watching for years get most of my knowledge and inspiration from your video's, so thank you!! I know your goal is to get to a specimen. With or without matrix? If you want to leave some host rock or go all the way to no rock, I had success with Molten Lye(sodium hydroxide)you decide when to stop but you really have to babysit the project! However, it works very well!

[@reaper121]

Great Job!!! Make more videos, clearly your extremely knowledgeable and a very hard worker!!!

[@Ligo-uh9gh]

Hey there! I'm not sure if anyone else has made this suggestion or if you have tried this yet, but my husband and I put one of our specimens in apple cider vinegar overnight and WOW!! Cleaned up crazy nice 👍 and took any iron sulfates clean off! Hope everyone has a great day! 😁

[@TheMilwaukieDan]

Loving the science and evaluative math involved here. Of you aren’t experimenting we aren’t learning. Great job

[@arnedalbakk6315]

Hello from Norway. Thank you Sir. I realy love this canal✨✨✨God bless you✨✨✨. And take care✨

[@KellDogg1965]

That was fun to watch! Thank you

[@mikeconnery4652]

Good job a great video and a nice learning experience keep up the good work.

[@frantiseklaluch6605]

Hi Jason, what a learning process... my first ever cupelling yesterday was... a disaster... I made a "cupel" out of MgO in small clay flower pot, MgO inside the pot cracked, gold microbeads are diffused in bismuth oxide cake... Well... I need to buy some good cupels... no so easy to make a good cupel...

[@rsaldivar4218]

Hey there Jason, I’m sold on using Oxalic Acid! It’s the best for tough specimens. Used heavily for Quartz crystal mining… makes the gold pop. 👍🏼

[@MarksGoneWicked]

I've seen meminer get some good results on dissolving calcite with various methods. Stuff like white vinegar may take a couple weeks to do the job, where muriatic acid might take a few days to a week.

[@wayneriches9596]

Really interesting watching the process, Jason, or processes. Makes you appreciate nice alluvial gold even more, lol. But then, you get to play with some cool gear. Good onya 👍

[@joshuahildreth5529]

Nice video! Awesome tests. I haven't cleaned up much specimen gold, but have used the ultrasonic cleaner in combination with powerful cleaners to clean up copper parts and gold plated parts - the agitation really helps, maybe give it a go? May be risking the specimen breaking up?

[@kristopheryoung9503]

Great videos! It was great meeting you Jason! I’m sure we all look forward to getting back down there! Was definitely an ausome time!

[@PoorMiners321]

wow nice job brother very good experiment i learn someting deferent on your video thanks for your effort.

[@sagarugolden3798]

Thank for information stone gold,, nice job

[@seymourpro6097]

I was shown round a rock analysis lab once. Each sample coming in was crushed to about 2 mesh then coned and quartered, then one quarter was crushed again, coned and quartered again twice more, then the final quarter was analysed. All to make sure that the test sample was representative of the sample from the mine.

[@georgeparrault9945]

Your Experiments Help You to Know what works better, as well as what doesn’t. Through Your Experiments Sharing saves Viewers a lot of Money and Time. “ Thank You “

[@joshuajackson6442]

Jason thank you for the education! ❤❤❤

[@mogwopjr]

I wish I could give two thumbs up, I love the E&E (Education and Entertainment) Thanks! A big part of life is messin around trying to figure things out and having a good time doing it, thanks for sharing your adventures :)

[@andyroo8592]

Chris from VoGus prospecting boils specimens in caustic soda and water neutralises the caustic soda in tartaric acid, although this more dissolves the rock rather than cleans them up for display, but the gold does keep its form.

[@scarlettardis2018]

Love watching that awesome lava pattern in your pyramid mould

[@danielclayton7524]

Good video. Helps me a lot

[@avonneave2131]

Really interesting collaboration with Jeff, Jason , excellent. I am aware that Jeff is very productive,so maybe we can hope to see more sometime soon. I figured any day now he'll be calling out for a jackleg , hopefully,lol. All the best regards Jason from here on the West Coast side of Australia 🌏🖖🙏🤟🇦🇺

[@wittmannmichael777]

Hey Jayson I know I said this before but I love you channel dude. Also I've just bought a load of books to do with smelting and gold and silver recovrey it's so interesting

[@1616katerst]

Coat your steel mold with a clay/graphite/alcohol wash. It’s super thin. Foundry supply place has it. Soda ash is your friend to make silica slag and grind your test material as fine as you can. Bigger grind takes longer and you might want to melt it hour or more longer. Hence grinding it smaller for faster melt. I had a glassblowing shop and made a lot of glass from the many raw materials that go in to it and find your metal recovery fascinating as anyone who’s run a glass furnace has seen just a little metal , couple grams, maybe bb size,will sink to the bottom of the crucible and start to eat a hole in it. You might find greater results if you start crucible say 1/4 full, let melt, then add more to kind of combat the foaming issue. your oxidation technique is intriguing and I want to see more. You have great videos!!!

[@skoitch]

Been looking forward to this

[@matthewsaleman58]

I use aluminium brightener to clean my gold. Alubrite. It is a mixture of various acids including 1% HF. It cleans the gold up perfectly and the gold retains its shine as well. I find that HCL takes away the golds shine so I prefer not to use it. Good video Cheers.

[@texasslingleadsomtingwong8751]

Been a killer series. Very intriguing

[@dgf41780]

There's also the discrepancy of purity between extraction methods. The math should be adjusted to reflect similar purity level. The smelt produced purity only 82.5% that of the gravity recovery. (66% purity=82.5% of 80% purity) When adjusted to 100%- That's 410 grams of pure gold per metric ton by smelting.(66% of total recovery) And that's 288 grams of pure gold per metric ton by gravity.(80% of total recovery) Gravity produced about 70.25% that of smelting. As stated in the video, other variables like grind, sample size, and fuel costs definitely contribute to either widening or closing the gap on recovery numbers. In the end, it is nice to see the experiments and their outcomes!!!

[@S13402]

Its amazing that you find the right solution every time you face a trouble,, For such ores, why dont you try leaching process with a non-toxic reagent (like eco-goldex super agent)? It will get more gold with far away less effort .. good luck Jason,, all your videos are fascinating !!

[@thomasbeltran5417]

Just a great segment 👍🏾❤️

[@frankbyrd6726]

This was a very fun video Thanks Jason !

[@shaneyork300]

Awesome to such high percentage yield.

[@thestrawberrypatch5644]

I have had bad experiences with K-Wool, Cer-Wool or Ceramic Wool Fiber (pick your name for it). Got it in my clothes and it found its way in the wash where it wound up on my underpants! No washing didn't remove it! It did a fantastic job redistributing it!

[@dewardtaylor4192]

What a video it was wonderful thanks Jason

[@g-dcomplex1609]

i've used a propane torch on super high grade gold ore from california to heat and quench the quartz into shattering off of the gold without harming the gold veins, another thing i do is take a wet saw and slice thin slabs off of high grade samples, then polish the slab/s on one side to expose the precious metals, then i sell, gift or trade them usually to collectors and jewelers for making jewelry.

[@daz41262010]

great testing Jason :) cool series of videos with Jeff's gold ore :)

[@christopherfritz.bigsaving]

Can you do me a favor. Grab a book and look up some information. First what is the aw of electrical wire. Second. I'd look up the details on my favorite show in school. Same book. Her name was Xena worrior princess. Now following me still ok now look up wait wait wait. I got that wrong. The show. Had that one guy. He said. (Baby roof). Waht was that guy. Oh. Goonies. He said. (Oh aye you guys ). Following me. So wait this was a algebraic question. Or a movie comment. Oh shit. Never mind. I'm just gonna hit post please forgive me. It's not his fault. It's my vault. I'd like it to be full of more than knowledge I just give away

[@williamcollins4082]

Watching you an your rocks brought back memories !!!

[@jeffhoffner6967]

I use Iron out for my quartz pieces, works very well

[@asjamuir5534]

loved the mini series on Jeff's ore

[@paulcoover9197]

My friend used muriatic acid heated slowly over a low fire to completely clean the rust off his crystals. We are from Arkansas. We have some of the best clear quarts.