3D Logo Animation in 2 Minutes | After Effects Tutorial | No Plugins

[@bigd747]

For years I wanted an easy way to do this without plugins. Thank you for keeping it short and to the point.

[@SmertimbaGraphics]

Glad it was helpful!

[@marlin2580]

This video is ass

[@rakibhassanemon9414]

@@SmertimbaGraphics Is threre any plugin

[@DaSakShow]

ive watched about 6 videos that were complete rubbish. all doing it different ways. yours worked first go! thank you

[@SmertimbaGraphics]

Great to hear!

[@luciahardy8435]

I've watched a couple of videos and this is the best way so far! easy to follow

[@tazflcn]

THE QUICKEST AND SIMPLEST. THANK YOU

[@ziasnooby2256]

So many other videos duplicate their images yet yours is just simple and doesn't lag after effects thank you dude

[@SmertimbaGraphics]

Glad to hear that, thank you too✌️

[@garretreed9709]

I was struggling because I typed “Shutter” in effects and was confused why I couldn’t change view to rendered. Spent like 5 minutes only to notice he typed shatter. Thick accent

[@sharkxwindow1195]

YOU SHOULD HAVE SEEN ME TRYING TO TYPE SHADER 🤣🤣🤣🤣🤣 until i turned captions on 😂

[@garretreed9709]

@@sharkxwindow1195 you have my empathy

[@rudolfowalchonzo2356]

exactly what I was searching for. Thank you very much

[@SmertimbaGraphics]

Glad I could help!

[@opulent155]

Simple and straight to the point. Thank you!

[@SmertimbaGraphics]

Welcome❤️

[@green_sakura]

You're just the best, simple and easy in 2 minutes.

[@SmertimbaGraphics]

Glad to help❤️

[@vsAnandDev]

Absolute best tutorial for 3D logo making

[@SmertimbaGraphics]

I appreciate that, thanks ♥️

[@cgthek.reaction]

Thank you so much. I've been looking for a tutorial like this forever quick and no plugins. Lifesaver

[@SmertimbaGraphics]

You're welcome!

[@BTBEV3469]

Great tutorial. Simple, quick and did the job. Bravo!!

[@SmertimbaGraphics]

You're welcome!

[@LiyanaArachchige]

No Beating Around the Bush. Thanks Man

[@thornz9460]

DIDNT THINK ID BE ABLE TO, BUT I DID IT- THANK YOU

[@austinlogan4416]

you are a genius

[@THEMARIAPEARL]

This was amazing, so quick and simple ~ literally saved my project!

[@SmertimbaGraphics]

Glad it helped♥️

[@CrispyCuts-14]

You made it to do easy man!! Thank you so much.😍

[@nishanshyamal5495]

Nice work. Thank you....!

[@MotionZest]

very simple and amazing method, thanks

[@maint9417]

Thank you, this video saved me so much time.

[@SmertimbaGraphics]

You're welcome! 😄

[@hextroid7848]

creo que este es el mejor tutorial, rapido, facil y entendible

[@dekillhead]

Wow, this way is very easy. Before this, I duplicated the 3D layers to make extrusion depth. Thank you bro!

[@SmertimbaGraphics]

My pleasure

[@AIYourLife]

best tutorial i've ever seen

[@SmertimbaGraphics]

I appreciate it😁❤️

[@NinaKerkhof-x3b]

Thank you so much! This was really helpfull:)

[@alvaroparra2292]

thank you for this tutorial! It's perfect!

[@SimplyAshton]

Thank you so much for this! Great tutorial, will definitely help level up my content : )

[@SmertimbaGraphics]

It's a pleasure. Enjoy✌️

[@mohwak313]

You made it to do easy bro. thank you so much!

[@SmertimbaGraphics]

Glad to hear that, welcome♥️

[@rageonyx]

Thank you! Seems other people think "no plugins" means a $30 subscription to make Maxon work is not a problem. 😁 This video is excellent.

[@SmertimbaGraphics]

Thanks for the sub😁✌️

[@timetravel_00]

exactly what I needed, you have my deepest thanks!!!

[@SmertimbaGraphics]

You're so welcome!

[@VidarrKerr]

OMG. Thank You again! Shatter... I never knew it existed. Well, I got my image extruded and videos projected on all the surfaces. Thanks!

[@SmertimbaGraphics]

Who would've thought shatter effect could do such things😂

[@VidarrKerr]

@@SmertimbaGraphics This was so unexpected. This was so awesome! edit: I am going thru your videos (so much good stuff, wish I had time to watch all)... Looking for something that is like when the Predator in the movie is camouflaged, you can still kind of see him, it looks maybe like light and images are wrapping around him to make him look invisible, then, when he shuts of the cammo, it is like he comes out of nowhere, like out of a mirror, or like the mirror effect turns off(?). I'm sure you've seen at least one of the Predator movies! You have a transition video, but it isn't quite what I need to know.

[@UlyssesStudios]

Very good and easy technique. Thanks

[@SmertimbaGraphics]

Thanks and welcome

[@spaceturtle589]

Best tutorial out there for this effect. Liked and subbed !

[@SmertimbaGraphics]

Thanks for the sub♥️

[@FadiFlashi]

Super useful! Thank you so much!

[@SmertimbaGraphics]

Welcome❤️

[@ravinderseehray]

very easy method, thanks you very much

[@RyanLeeProjects]

this video is exactly what i needed, thank you

[@SmertimbaGraphics]

Glad it helped!

[@joolessa]

this was life changing thank u

[@SmertimbaGraphics]

Welcome ♥️

[@fernohms]

Tnks mate, you made it possible!

[@yasirshaikh2922]

WWWWWWWWWWWWWWWWWWWWWWOOOOOOOOOWWWWWWWWWWWWWWW reallly beauty of easy making 3D to PNG objects, Superb Sir Superbbbbbbbbb, , You done greatest jobbbbbbbbbb , biggest like and stay blessed

[@euAbnerBarbosa]

Uaaaaaaal muuuuito obrigado amigo❤

[@SmertimbaGraphics]

You are welcome ♥️

[@Wanderloots]

Extremely helpful! Just saved me hours of effort. Thank you very much ✨

[@SmertimbaGraphics]

Great to hear!

[@NessaRebel]

Thank you for this amazing tutorial!

[@SmertimbaGraphics]

You're very welcome!

[@anetespunde-abolina4332]

Perfec and easy. Thank You!

[@SmertimbaGraphics]

You're welcome!

[@kozin485]

Thank you bro ❤❤❤❤🎉🎉

[@SmertimbaGraphics]

Welcome❤️❤️❤️

[@Black.Kangourou_official]

king thank you

[@xoxoso_TT]

Thank you for help!!

[@midnightjayy]

Simple and easy! Helped me out a lot.

[@SmertimbaGraphics]

You're welcome!

[@runv3462]

Thank you so much

[@SmertimbaGraphics]

You're welcome! 😁

[@sunsetpark_fpv]

I haven't tried it yet but this method looks amazing 😍

[@SmertimbaGraphics]

It's simple and works for complex logos too😂

[@stiffyBlicky]

absolutely great video

[@SmertimbaGraphics]

Thank you very much!

[@Tuhnytte]

God bless you brother

[@SmertimbaGraphics]

Likewise

[@teslar8533]

YOU ARE A LEGEND BRO

[@SmertimbaGraphics]

Thanks😂❤

[@mahabubistihak8779]

OMg. this was really awesome

[@aemux]

Thank you sm!!

[@SmertimbaGraphics]

Welcome😁

[@wes.333]

legendary!

[@DJ_SOLE]

AMAZING!!! Thank you, Smertimba Graphics for this MUCH MUCH easier way to extruse logos!! I was so tired of copying and pasting 45+ paths. Thank you!!!

[@SmertimbaGraphics]

Great to hear😁

[@kurumarumeee]

Thankyou very much.. it helpfull and not click bait

[@CherubMeutrich]

Best tutorial I could find regarding this subject

[@SmertimbaGraphics]

Thank you😁

[@vanilakem3269]

thankyousomuch!!!

[@adyan4563]

thank u bro soooo much like soo much,just tip? how to adjust speed of spinning?

[@SmertimbaGraphics]

Move the end keyframe to the left and it will spin faster. Enjoy♥️

[@vintageandmorelli]

Legend ♥

[@BLACK_TIGER_OFFICIAL]

Thanks Again

[@SmertimbaGraphics]

Happy to help 😄

[@mattytaylor5]

Great video, thank you

[@SmertimbaGraphics]

You are welcome!

[@rameshmarati6546]

thankyou sir ......

[@cardermedia]

Great video - but I can't rotate on an anchor point. Any tips?

[@SmertimbaGraphics]

You could add a camera and set camera system to the after effects camera and animate it that way if that's what you mean

[@DeltaXMusic]

pretty cool thanks

[@SmertimbaGraphics]

Welcome ♥️

[@EncoreEventsDesigner-fw5sx]

thanks a lot!! if you can just help - for round logos - how to flip back texture, so that both the side of coin looks same

[@SmertimbaGraphics]

It's a bit tricky, but possible. add the same logo file(or whatever it is) right click, transform, flip horizontal, then precompose the flipped logo and turn off its visibility, then in textures settings set back layer to that flipped/hidden layer and it should work

[@EncoreEventsDesigner-fw5sx]

it worked!!! couldn't thank you enough!@@SmertimbaGraphics

[@jonathanblack1095]

This is awesome!

[@SmertimbaGraphics]

Thanks

[@pete-g-yih]

Great video, cheers. I have a question - how do you set the anchor point to the middle of the object (half way into the extrusion) so it rotates around that point, rather than the anchor point being on the front face?

[@SmertimbaGraphics]

In that case you should add a camera layer, then a null object, make it 3d and parent the camera to the null, then animate Y rotation on the null object, it will make it rotate evenly on all sides

[@septiandwi2544]

thank youuu, it helps a lot

[@SmertimbaGraphics]

Glad to hear that!

[@OtmarLunge]

i am following every step exactly how you do it and my object is still shifted forward by a bit, but other than that great turtorial!!!

[@kuris682]

thank you a lot! This really saved me a lot of time

[@SmertimbaGraphics]

Glad it helped!

[@MEMESDYALBUGS]

Much luv for like this tutoriels short and hella works thanks Bro!!

[@SmertimbaGraphics]

Happy to help😁

[@tonioedits]

Thank You!!!

[@SmertimbaGraphics]

Welcome!

[@HebiOne]

Thank you! The speed of my rotation was pretty slow, can I change that and is there a way to smooth the edge?

[@SmertimbaGraphics]

Yeah you can set rotation value to 2 or move keyframes closer to each other. Not sure about the edge though

[@HebiOne]

@@SmertimbaGraphics thank you. As far as exporting goes what should I do? I’m a complete noob sorry

[@SmertimbaGraphics]

Ctrl + M shortcut for render, select h.264 format, match sequence settings high bitrate preset, then select output folder and export✅

[@manhtunguyen1235]

thanks you so much bro

[@SmertimbaGraphics]

You're welcome!

[@Brandon-rk6zo]

Great tutorial, however my logo is spinning really fast. Do you know how to slow I can slow it down?

[@SmertimbaGraphics]

You can increase the distance between keyframes to slow down the rotation speed

[@vrihg7705]

thanks a lot !

[@SmertimbaGraphics]

You're welcome!

[@mannyshakur773]

Amazing tutorial ❤

[@SmertimbaGraphics]

Thank you❤

[@roman_randhawa]

my logo almost fully dissapears when i place the effect on it and fully disappears when i change it to rendered. I still followed the full tutorial to see if it would come back but I can't see it at all now. Any fixes? Thank you btw, very clear and quick tutorial

[@SmertimbaGraphics]

What's the resolution of the logo?

[@Im-taha]

Perfect

[@SmertimbaGraphics]

Thanks ✌️

[@JosepMotion]

So clever! Thanks

[@11sabelle59]

Thank you so much for the video!! I'm having troubles where I can't see the logo after I change the Shatter view to render. Is there anyway to solve this problem? Thank you!

[@SmertimbaGraphics]

Move the playhead to the beginning of the timeline, that should do it

[@11sabelle59]

@@SmertimbaGraphics Lifesaver! Thank you so much!!

[@thuytram8004]

thank you very muchhhhhh

[@SmertimbaGraphics]

Always welcome

[@FasesComunicación]

Impresionante!!!! GRACIAS!!!!

[@sharkxwindow1195]

Thank you! ❤

[@SmertimbaGraphics]

You're welcome ❤️

[@nonvegrecipe-yr2gy]

it worked

[@NakuruKouChannel]

hello, just wanted to thank you for the fantastic tutorial and a question! is it possible to have a different texture on the two sides of the spinning object?

[@SmertimbaGraphics]

Hi, you can assign different layers to front and back, first add a new layer, add whatever effects you want to it, then in shatter - texture settings select it as back layer and choose effects & masks property next to it.

[@akis_pro]

amazing

[@SmertimbaGraphics]

Thanks

[@cypherkidsacademy2492]

Bravo! Thank you for the tutor. Just one thing though. I rendered it but couldn't retain the original color on a transparent background. It showed a lot of blue colors. How do I render and still keep the color without a BG?

[@SmertimbaGraphics]

I am not sure what you mean, I have just checked and there's no issue without a background

[@cypherkidsacademy2492]

Thank you so much for your response. I did the tutorial again and found my slight error. It works perfectly now. God Bless@@SmertimbaGraphics

[@adeotijoshua6427]

Thanks for this amazing video bro

[@SmertimbaGraphics]

My pleasure

[@clownfx4119]

Thank you bro

[@SmertimbaGraphics]

Welcome

[@danilooliveira1243]

luv u broo

[@Esceps]

you saved me omg

[@SmertimbaGraphics]

Happy to help😁

[@AlexPals]

Take your deserve like good man

[@SmertimbaGraphics]

Thank you 😊

[@isaiahbarrett1]

How can I make my logo after creating this effect, speed up the animation and then make it infinite loop??

[@SmertimbaGraphics]

To speed up the animation you can decrease the distance between the keyframes and to loop you can add a loopout expression to the rotation property

[@andrediasjr6178]

very great tutorial very easy to do !

[@unknownstudios5812]

Thanks

[@SmertimbaGraphics]

Welcome

[@Joeysan24]

How do I add motion blur to this effect?

[@SmertimbaGraphics]

Try adding an adjustment layer with cc force motion blur or pixel motion blur

[@Azza23]

Any way to make the back side not look the same? For example I am spinning an emblem with text so when its showing the back side it would be cool if I could make that a solid color or a gradient

[@SmertimbaGraphics]

It's a bit tricky, but possible. add the same logo file(or whatever it is) right click, transform, flip horizontal, then precompose the flipped logo and turn off its visibility, then in textures settings set back layer to that flipped/hidden layer and it should work

[@Azza23]

Thanks! Love the vids!@@SmertimbaGraphics

[@borendsoff]

thx