Smith and Wesson SD9VE / SD40VE Trigger Spring Kit - S&W SD9VE Accessories

[@Dershinator2.0]

Best gun breakdown and explanation I have ever experienced.

[@antoniorobles3498]

FACTS

[@superseamstersewingshow514]

Yes, true that!

[@rubenreyna5322]

I have a S&W 40 and it has a really heavy trigger. I saw this video, so I ordered the spring kit at MCARBO. Disassembling and changing the springs was easy, but I had some difficulties reassembling the trigger in position. So I had a second look at the video and it took only five minutes to align the holes and replace the pin. I spent two hours (wasted time) doing my way. Now it's smooth and easy. I feel well, but I am 77 years old and I know a lot of my strengths are gone. Thanks a lot for this video.

[@sonnynicolascpm7011]

Just installed this myself, went to the range and put 100 rds through with no problems. Much better trigger setup for sure and I’m a lot more accurate.

[@yezkaholic]

Never worked on a firearm before us it a difficult task?

[@joev6043]

This kit made a huge difference. Gun is now much more accurate and has a smooth crisp feel. I hated shooting this gun and was forgotten about in the safe. It has now become one of my favorites. This videos was very helpful. Jut be patient lining up the last pin.

[@Frankie5Angels150]

Gotta tell you, lining up everything in order to insert the trigger hinge pin was extremely difficult. I had to stop working and soak my bruised fingers in ice water several times. It took hours. In the end, wiggling the pin in using pliers finally got the job done. Whew! Trigger seems nice now though. Now I know which parts I will NOT be disassembling when I clean my SD40 VE!

[@mr.nobody7601]

Just bought my sd9 last Saturday and ordered the trigger kit before I even left the parking lot. Just received it today and just finished the install with the help of this video. First time ever doing a spring kit and this video was amazing to follow! Can’t wait to actually try it out. Too bad it’s raining now!

[@JohnLocke1776]

So how is it working out?

[@mr.nobody7601]

@@JohnLocke1776 no complaints. If I was to change anything at this point, I would get the upgraded trigger to make it just a bit lighter yet. But it has a good feel and a good smooth function as it currently is

[@nicks8026]

I’ve never tackled a project like this before but thanks to this excellent tutorial video and your spring kit, I got the job done with a minimum of cursing and struggling. The difference is clear and very much welcome. Thanks!

[@MCARBO]

Awesome! Thanks Nick for sharing your results! Happy to hear this and glad the video was useful.

[@superseamstersewingshow514]

You have me hyped up. I'm going to change my springs.

[@megatrends]

I installed this a spring kit in an SD40VE and it is a new gun. Highly recommended upgrade. As a side note the trigger that everyone hates, myself included, that is stock with the hinge in it is actually just fine with the proper springs and the travel length is reduced. You don't have squeeze hard to get that trigger to fire. Very very happy with the results.

[@chuckhollins9891]

J Beau I totally agree , the kit makes a huge difference

[@ericwilliams7374]

I have been researching videos on changing springs on my SD40, and I have to say, out of like 8 to 9 videos I have watched so far, this is the best!!!!!! All the other videos make you feel as if you can't do this upgrade yourself, like you have to take it to a gun smith, and or you need to be a Doctor/Rocket scientist to do this upgrade!!!!! Straight forward, simple explanation of the processes, and clear video throughout!!! Thank you!!

[@ralphchandler4536]

My God that little plastic spring tool is the best part of this kit. I can't imagine how much longer that would've taken me otherwise. My SD40 is so much smoother now it's like a different gun. You guys have my repeat business for sure

[@MCARBO]

Awesome! Thanks Brother, glad it helped. We always try to make the installation as painless as possible!

[@BlackestMan]

Late, I know. But it is a monster to align correctly. At least 10 minutes on the 5th time I’ve e done it 😅

[@skilobrown9509]

Ontario Canada here, just installed this kit on my Black SD9 and oh man i don’t have any regrets about getting the sd9 over a glock 19 now. Thanks to this video installation was possible and overall pretty painless. Thanks for making a great installation video for us to follow!

[@goofballbiscuits3647]

This is the most efficient, informative and overall thorough breakdown video I've seen. Well done. Subscribed.

[@bocconom]

Clear, concise and the camera work is excellent. You explain better in fewer words than 90% of the videos out there.

[@chuckhollins9891]

I know this video has been out for quite a while but I always wondered how difficult it would be to upgrade the trigger and you made it look so simple that I'm confident I can install one myself , thanks so much for a thorough explanation and up close and clear video , really appreciate you

[@chuckhollins9891]

Update , I recently installed this kit , had a minor struggle with the slide stop lever hole lining up for the pin to push through but after a few minutes I finally got it , the Install was finished in 5 minutes , Thanks again Chris you made it so easy for many of us to do our own installs , you are very much appreciated

[@josemigueldavila]

I just finished installing the trigger spring kit into my SD40VE and must admit that: 1. It was easier than I expected (minor hiccups with the trigger pin, but that's on me). 2. Every single step, followed word by word, gives you perfect results. 3. Do not have a way to measure, but the feeling is amazing. Due to COVID-19 limitations in my country, I cannot get to the range to test with live ammo, but my Tipton Snap Caps are surely loving the new set. Thank you MCARBO for such an easy DYI kit and a great instructional video!!!

[@essneaks]

The range never shut down in my area. The range close to me, was only open to members, but the one 20 mins away never slowed down.

[@lanceneuscheler7141]

Where can I get a microtip flathead similar to the one he uses?

[@weechitamex]

MCARBO : THAT YOUNG MAN IS THE WAY TO PRODUCE A AWESOME VIDEO : VOICE , LIGHTING , FOCUS , FOCUS , FOCUS , PICTURE QUALITY . THANK YOU FOR SHARING YOUR TALENT SKILLS IN DETAIL . KEEP THEM COMING OUR WAY . BEST BLESSINGS .

[@frankthespank]

faustian man - Sometimes Daddy yells.......

[@Sandhill1988]

Got to give you Kudos Sir. This is by far the best trigger and spring kit installation I have ever seen. Excellent camera angles very well explain excellent detail.

[@alant5757]

Thanks for the video. Going to order the kit for my Mothers husband. We shot the pistol the other day and the trigger was super heavy. He said there was a kit out there. I bought my trigger kit from you guys for my CZ-75 and it worked out FANTASTIC...!

[@richardjohnson4238]

I just ordered a kit for my SW9VE. These video's gave me the confidence to try it with my Kimber Micro 9, and 380. The instructions were so clear and so accurate that I had no trouble with either of those. I look forward to getting the SW9VE kit now.

[@E14days826]

I do not have this handgun but just the way you explained the entire assemble/disassemble/installation is very commendable. Great camera as well. Hats off to you!

[@srmj71]

The .40 version is the first handgun I ever bought. A purchase I've never regretted. It's an awesome tool. After seeing the difference in pull weight, I think I'll be buying myself a kit.

[@chev39rsh]

Bought it, disassembled and assembled after watching video. Fairly easy. A little awkward getting everything to line up, but like you said; would be a nightmare without that little assembly pin.

[@jamesteel4819]

My gunsmith wanted $120.00 to install this, I did it myself, great instructions, I put synthetic grease on the little plastic pin assembly tool, it kept it from sliding back and forth as much.

[@chinorunitup7594]

4 years later I got the mcarbo spring kit🔥🔥🔥🔥your video helped me 🔥🔥🔥🔥🔥

[@stevenwaling23]

Just ordered mine the other day, already arrived. Watched this 2x, put it on without looking back! Took all of 4 min or so to do. STUPID EASY... still quite a bit of slack but then when tension builds in the trigger, stop ther squeeze and a nice, clean, easy 5lbs when you feel that hammer fall! I can't wait to go to the range this weekend! Thank you!

[@londland5146]

Purchased this recently for my .40..made a world of difference..thku

[@Al-Fiallos]

The spring kit came in yesterday. It rained today so it was a good day for the upgrade. All I can say is WOW! Yes, I was a little skeptical but now the SD9VE trigger is a pure joy. Where it was gritty and resisted pulling before, now it is as smooth as Kerry Gold butter on a warm summer day. Your video made it a snap. Thanks from Al.

[@MCARBO]

Great to hear!

[@EyeNVNo1]

Just finished my install. You are a life saver! Big thanks to the guys/gals over there at mcarbo

[@JG-dx1ud]

This spring upgrade is just what this SD40 needed! I also changed out that POS stock hinged trigger for the Apex tactical action trigger...now it's like all my Glocks.....smooth and dependable, but $400 cheaper. Thanks M-Carbo!!!!

[@someguy5444]

But a Glock is only 550 brand new, 400 cheaper seems like a stretch..maybe 200 at most unless your going to a shop and announcing that you have never bought a pistol and will pay whatever 😂

[@JG-dx1ud]

@@someguy5444 On the contrary I walked into a store and announced that I have purchased many pistols and would not pay more than $200 for this SD-40. I left with it for $200 plus applicable taxes. Considering the Glock MSRP plus store markups I’d say that rounds out to about $600 wouldn’t you agree? And that brings us full circle to the fact that my SD-40 was $400 dollars cheaper than a comparable Glock and so far (after improvements) just as capable. Thanks for playing

[@troyreardon7428]

Any tips im doing this to my sd40 along with the apex trigger replacement and it failed idk what ive done wrong everything seems to sit just like in the video

[@athleticsoul6199]

Thanks!! This video has given me the courage to dissect my SD40 myself; instead of taking it into a gunsmith. Very informative and precise. Best breakdown video I’ve seen so far. Salute

[@carlcapello9956]

I would have to say, that was a very good demonstration of how to replace the trigger striker and trigger return spring. I almost think I could do the same repair but, in reality, I am not as confident to do such a job like that. I am just a newcomer to pistols and I first have to learn how to do the basic cleaning of the weapon.

[@MichaelLivingston-me]

Installed this evening. Here's what I noticed. Trigger pull felt lighter, not by a large amount, but noticeable. The real issues it answered, smoother pull, and a predictable trigger break & release. Every trigger pull feels the same with a predictable quick release. I'm going to the range to test it. I'm confident I will be able to achieve consistent shot placement. I think this kit is definitely worth buying if you own this model.

[@lynwoodloco77]

I personally don't have a problem with the stock trigger but have done 3 kits on my friends SDs and they love the lighter smoother trigger pull.

[@gunner5125]

I've just ordered the spring kit, mallet, punch set and block for my 40VE. Thanks!

[@christopherfrost1820]

Nice, i took my Sd9ve out for a test drive this morning(got it last week) and was immediately struck by the trigger being so heavy, i am going to try this, thanks

[@Swdlm2]

Thanks M- Carbo! My first time doing anything like this. That little tool saved my life. Thanks again!!

[@Ocho474]

He is right about how of a pain it is to reassemble that trigger spring without the little plastic pin, I didn't have it on me so I had to use a really thin wire to pass it through the loop of the spring and pull it as I insert the block pin through. I won't do that again LOL.

[@markwilson422]

Awesome information your knowledge is impeccable

[@cyledavis4982]

I purchased this spring kit and used this video to install it. Thank you so much. It made my install a breeze.

[@brianbuell573]

Awesome. This was my first purchase and still have it. Would love to try this out.

[@athleticsoul6199]

Same here.

[@Cheeseheadturo85]

Awesome video and great kit. Reinserting the trigger hinge pin was a pain and I couldn’t have done it without your help. Thank you for making this tutorial.

[@Robo-dr8tk]

You guys are great 👍 I tell all my friends about your products, and how well you installation videos are done . Great video !!! Can't wait for my kit !👍👍👍

[@justinbuckalew9952]

Great video man. I love my SD9, now I love it even more. Very informative.

[@Al-Fiallos]

Excellent no nonsense presentation. You convinced me to upgrade my SD9VE.

[@MCARBO]

Great to hear!

[@robg7379]

@@MCARBO Good vid brother I want to get that kit for sd9 any light primer strikes or reliability issues?

[@michigan9133]

First time doing a trigger...and wow! Two springs in slide - super easy. The trigger spring (I believe the return) SUCKED HARD. Ended up not using the little rubber tool that was included and finally got it together.

[@kroninn]

Thanx for the video. I just replaced my spring kit but, didnt use your kit. A wood skewer cut to size works as a replacement to install the trigger return spring.

[@matthewchilders7284]

Just bought this pistol I may try to replace the trigger thanks to this excellent video

[@eotheleo83]

Just installed this kit from MCARBO and it was not too difficult (hardest part was lining-up the trigger spring pin and sliding the spring back into the center). I have a SD40VE for home defense (first handgun ever). Thanks for a great product and a great installion video.

[@williamhavens471]

Can't say my install went as smooth as the video! I tweaked the trigger return spring bad enough that I didn't want to use it. Mcarbo was able to get me another spring since I had already purchased the kit. Cost was a few bucks, cost more to ship the damn thing. The assembly tool was too loose and fell out every friggin time i tilted the frame. Needs to be tighter so it stays in place. Since then I've added an Apex trigger. With the sear removed I was easily able to align the trigger assy, locking block and slide lock up in about 30 seconds without the "tool that's supposed to make it easy". Love the SD9VE! Shoots similar to my G22 & G19. My wife likes it better than the G19 and it is now her gun. She says it looks prettier than the glock. The kit does what it's supposed to do, the pull is lighter and after polishing the trigger bar and sear linkage it's smooth with a crisp reset.

[@johnnybaughman7593]

Since I seen how easy that was to lighten the trigger pull. .. now I'm going to buy the kit and do it myself... Thank you so much for the free class

[@Boxsta_57]

Johnny Baughman I just installed mine last night.First gun upgrade I’ve done.Went great with the help of their video.

[@Tapered3414]

I really appreciate your detailed and current explanation, as the mechanism currently varies a bit on this S&W. Good camera focus on small details and pieces, regards!

[@MCARBO]

Our pleasure!

[@franciscochavez3970]

Very nice explanation, definitely the best way to do it, the visual was really bright you can really see everything really good 👍 thank you

[@sixfoot8438]

This is the best instructional video on this that I have seen. I now have confidence that I can do this myself Thanks. 👍👍👍👍

[@ericwilliams7374]

Exactly, I have seen other videos on changing the springs, and they made it seem like you needed to Dotor, and a Rocket scientist!!

[@rafaelalcantar9938]

I really appreciate your video, it helped me reduce the pounds of trigger pressure on my SD 40, thanks for your contribution. 👍

[@TheCynysterMind]

Thank you for this! I snapped my slide lock lever and while attempting to replace it I dumps the whole thing and had to reassemble... This vid allowed me to get it all back in working order. I am mechanically inclined but far from a gun smith.

[@eddierodriguez8295]

Just did the spring kit swap and the trigger is way smoother I can't wait to go shoot it. Thanks MCarbo. UPDATE: the trigger is amazing now. My in law has the same gun and she doesn't like shooting it due to the trigger but when she shot mine she was "wow holy sh**"

[@RM-hy5kz]

Well done, the video is excellent, perfect lighting so you can see, great camera angles and probably the best do it yourself instructional video I have seen on KZbin. Thanks for not making it feel simple to do and completely understandable 👍🏿👍🏿👍🏿

[@tymartin1508]

Sweet and to the point unlike Lenny Mcgill. Saved me a lot of money AND time. My local gunsmith was 5 weeks out.

[@superseamstersewingshow514]

Great video. I watched your video over a year ago. I'm glad I was able to find it again. Your video is the best I've seen for the trigger spring. I'm just about to get the springs. Hopefully, with your video instruction, I'll succeed at changing my springs. Thank you very much!

[@steelpunisher6944]

Awesome! Keepm coming Mcarbo.

[@kaseyhinton]

Bought mine awhile back but just barely got around to installing it. Great spring kit and video.

[@enriquebob5.0]

Super clear explanation thank you now I feel confident to do mine

[@Erik-rc7iy]

I was on the fence about this sidearm because of the trigger, but after watching this video I’m getting it!

[@joshhope9287]

Just bought this pistol for my wife she’s been wanting a .40 I felt the trigger and suspected there would be some kind of kit to address the pull and this kit is perfect!!! Love the video ! Solid directions easy breezy can’t get any better! Now I’m gonna grab another One the green one with the laser just to complete the set hahaha

[@wardatkins1320]

Great job . I feel like a student in class " presentation was well done. I think you're a professional "

[@MCARBO]

Thanks Brother, glad you found it helpful! I appreciate the compliment.

[@richardjohnson4238]

Ok. I just installed the kit for my SD9VE. It wasn’t as easy as my two Kimber Micros but it wasn’t awful. Just a little trouble getting the slide stop realigned. Once I got it the improvement was dramatic.

[@jamaaljenkins7182]

Damn good video!! Even with seeing a better way to takedown the slide. I’ve got the SD9VE & SD40VE and I can’t wait to swap out the spring/trigger. Good stuff bro!!

[@natethegreatog]

Installing this when my 10 day is up! Have the parts ready to go!

[@IAMRUSTEDROOT]

Looking to pick this gun up tomorrow. Will likely do this mod after reading other recommendations as well. Seems the only "complaint" about this gun is the trigger.

[@mpkp2011]

so any updates? I just picked up an SD40VE and feel like the trigger isn't *as bad* as people built it up to be, but I am still considering the upgrade since it would still be an improvement.

[@IAMRUSTEDROOT]

@@mpkp2011 It is a great improvement. I'm extremely happy I did the upgrade. Worth it. I also have another SD9 with the stock trigger still in it and the difference is night and day. I have the Apex trigger kit ready to install in it as well.

[@mpkp2011]

@@IAMRUSTEDROOT hey thanks that is good to know! It is my first handgun so I have little to compare it to, but so far I love the gun. I bought it with HiViz sights and am just thinking about upgrading the guide rod and trigger. So far just stock it's been awesome though!

[@IAMRUSTEDROOT]

@@mpkp2011 I upgraded my guide rod as well to a stainless one. I also added tritium sites and a talon grips and aluminum back plate. Totally different gun now.

[@mpkp2011]

@@IAMRUSTEDROOT thats the best part about buying a new gun right? Tricking it out until it's your own 😎

[@jasonperez5343]

Loved this step by step video. Great breakdown of parts and terms. Great camera angles provided good view of what I will be working with.

[@rosspbarnett458]

Well done, articulate, and to the point, very informative !

[@Thirsty_Tree]

So I didn’t actually have the same trigger kit as the one in this video, I had the Apex brand trigger kit, which doesn’t include that small assembly tool. What I suggest if you don’t have it, is take a plastic straw from a fast food drink or whatever, and cut it down to the width of the trigger so it’s flush on both sides, and then cut along the inside of the straw piece so you can curl it into shape. Worked perfectly for me and saved me a lot of time, just make sure that once you have the roll pin in place back in the frame, look for scraps of the straw bits inside the frame and make sure it’s all out. Might be a bit messy, but it worked great for me.

[@billp37abq]

Galloway flat-faced trigger + Apex spring kit reduced pull to 4.5 lbs. After S&w return for striker/firing pin warranty replacement. :) Calibers did work for $60. Trigger take up greatly reduced. Poster installed galloway 20 lb recoil spring + Apex spring kit in ~2016 with original trigger. Pull reduced to ~6 lb.

[@alanbarrios8882]

Thanks guys just installed the new spring can’t wait to go shoot it

[@MCARBO]

Awesome! Thanks Alan

[@brudamiranda3314]

I'm so excited to swap out in SD9. I chosen MCARBO ! shipping was way to fast. Thanks you

[@jeromestaab3455]

After install and following this video I now have light primer strikes consistently. I'm super bummed. Going to have to drop in the original parts. I really do love my sd9ve. First gun I've ever bought myself so it's sentimental.

[@Spartan-zx2nq]

Same, I started getting failures after a while. Once I went back to the original hardware my gun runs perfectly even when dirty or using low quality ammo. Good product for the range but would not trust it as a daily carry

[@ron5454]

Excellent video.

[@johnnybaughman7593]

Ordered my spring kit for my SD 40VE.. can't wait for it to arrive

[@MattK-v1z]

Future gun smiths, the last pin can be a little frustrating lol just take your time. Trigger needs to be positioned just right Spring is great, so much better than before

[@frankarchibald732]

This video helped me ssssoooooo much!!!! I loved it!! Made it ssooo easy. Thank you so much for the video!!

[@aaronlin9998]

Great video! Very nice on every single small detail!

[@rtz549]

Good camera work.

[@aztecghost33]

GRATE vide grate explanation great light you can see everting help me a lot i upgrade my 2 SD9 trigger with MCARBO KIT THANK YOU GUYS

[@kavingriffin1164]

Very good video. The little piece that comes with this kit is a plus. I got through this very easy on my new SD9VE and this was my first time doing this to any gun. I have a Smith & Wesson 5906 thats very heavy. It has the same hard trigger as the SD9VE. Now its much easier to pull and I can definitely tell the difference. Can't wait to shoot this pistol. I'm gonna try to find a kit for my 5906 now.

[@joes.7536]

Had some light primer strikes with the Apex spring kit for my sd40ve. I had to put the factory striker spring back in. Not a lot maybe one percent but that’s too much for me I prefer 0%

[@MCARBO]

Our kits are designed from the ground up and then tested with the hardest to ignite factory ammo. If they don't function 100% with the hard to ignite ammo then we go back to the drawing board and a failed kit is never released.

[@yakfizzle]

I had the same issue with this kit. Out of about 100 rounds it happened 4 times. I'm going to try the factory striker spring and see if I have the same issue.

[@Youzack1]

Just added this to my sd9 and WOW. It’s a night and day difference. Must have upgrade. Can you guys please come out with a flat trigger for them?

[@Boxsta_57]

Thanks for the video and the kit.Installed it last night and the video was great!

[@Moneywithdaniel]

You're amazing love the way you broke down the video!!!!

[@brandonwhitfield9955]

Awesome video thank you!!!

[@prioritymaleman]

Excellent explanation of this process. Well done!

[@MichaelMiller-op5sx]

Great video. Im gonna have to get me some of these kits. I got 2 sdve40 's and 1 sdve9mm.

[@misterwitchett5588]

I absolutely love the southern accent. She sounds like the lady in the movie Hacksaw Ridge played by the Australian actor Teresa Palmer who mimic the southern accent precisely.

[@palmgeek]

Very informative. Unfortunately, I decided to play a drinking game where I took a shot every time the word "capture" was used. Now I have to go back and watch it again to get past the striker block safety spring.

[@roarksown1]

Just ordered this ... thanks for making it simple.

[@ar_snl]

Way easier design to breakdown than the shield. Interesting.

[@rustynuts8668]

Great explanation on how to do this, thanks for the video.

[@cedricmerritt7664]

Just installed today, can’t wait to hit the range!

[@chestermarquez2786]

Did you replace the trigger as well or just the spring kit?

[@cedricmerritt7664]

Just the spring kit. It makes the trigger pull much better

[@johnakridge2916]

I bought it thanks for the tutorial

[@sheltonherron6105]

Nice informative video Easy fix following your Instruction GREAT DEAL..

[@900cc]

Just placed an order!!