Smith & Wesson 686 Disassembly

[@michaelestrada2772]

My dad’s 686 wasn’t cocking into single action and the whole gun kept locking up. Following your video, I cleaned and oiled all its internals and it’s working like new again. Thanks!

[@MikeJack]

i'm glad my video is helpful

[@douglasferris]

Thanks very much for your excellent video!! Your meticulous instruction and occasional tips eliminated my fear of disassembling and reassembling my Smith & Wesson 626 .357 Magnum and Smith & Wesson 629 .44 Magnum Revolvers. They do need a thorough cleaning every 500-1,000 rounds. Thanks again!!

[@MikeJack]

thanks I'm glad my video can help others.

[@FalconLair09]

MJ - because of your brilliant disassembly and reassembly videos of the GP100 i was able to confidently and successfully learn everything about the workings of my GP - thank you....NOW, i just purchased a S&W 686 so im back and already benefiting from your S&W videos too - you make gun owners BETTER gun owners by sharing your knowledge with all of us - the entire gun community owes you a debt of gratitude, so, once again, THANK YOU, by far the best videos out there

[@MikeJack]

FL thanks a lot, I'm happy if my videos can help others gun owners.

[@mikeseigel6566]

The new model 69 in 44mag has the same insides. That little stirrup on the trigger that the mainspring hooks up to is a bugger, but this video showed it clearly. Great video Mike

[@MikeJack]

Thanks

[@stephensantini5863]

Fascinating. I will make my son watch as well. A firearm owner is responsible for knowing their firearm, and while they may never get this far into it physically, need to understand it.

[@MikeJack]

👍

[@heroinmom153]

They should get into it this far, especially with a carry gun. Carry guns and heavily used guns get a lot of gunk inside that can not only affect the performance and reliability of the firearm, but can cause internal damage in severe cases. A good internal cleaning and light oiling every year is highly recommended for carry guns, and even brand new guns after the trigger is broken in to remove metal dust and shavings left over from production.

[@lamoulegeante2462]

Awesome video. This helped me fix an issue I had with the DA sear not resetting correctly. Thank you so much. Greetings from France.

[@MikeJack]

👍

[@tomspencer3048]

Thank you. Fantastic video on the Newist internals. Especially the stirrup connected to the hammer the new way the old way the stirrup was pinned to the hammer. Just an excellent job of showing the proper disassembly of the newest internal set ups. Again thank you very much

[@MikeJack]

Thanks i'm glad my video is helpful

[@meakai2]

Best how-to video I’ve seen. Very clear and precise.

[@MikeJack]

Thanks a lot, I`am glad you like my video

[@racerroy1]

I qualified as a Smith Armourer back in the 90s and then the bloody UK Government banned all hand guns with barrels less than 16 inches, sad day that was for many shooters and dealers alike.

[@MikeJack]

Shitty Decision

[@scavenom2008]

RacerRoy1 stupid government like always

[@Jtoob-z5n]

16 inch handgun?

[@racerroy1]

@@Jtoob-z5n they were described as a Gallery Gun and so were legal.

[@kicknsystm]

I ran into a glitch on reassembly, you saved my butt. Thanks.

[@MikeJack]

Thanks I am glad if my videos can help other gun owners.

[@danb4258]

Mike Jack, I just stumbled into your video....one of the easiest to follow. Thanks a lot.

[@MikeJack]

+Dan B Thanks, I'm glad you like my video

[@onseki1774]

I've never actually seen what the inside of a S&W looks like, very nice watch like construction where all the space is maximized

[@MikeJack]

👍

[@martinkaaehansen7273]

du laver nogle super videoer :-) stor tak for det. Det har hjulpet mig flere gange.

[@MikeJack]

👍

[@sebastiendurand8973]

Thanks from France 🍻

[@MikeJack]

You're welcome

[@totenkopfelite88]

Beautifully shot, excellent video

[@MikeJack]

Thanks

[@brentvinson9198]

Great video. Excellent camera work.

[@ab_customz_llc]

Nice job, thanks for sharing this!!

[@MikeJack]

👍

[@dinossanisouzabastos5233]

Gostei do paninho pra retirar a mola do gatilho. Bem delicado heim 😍😍😍 kkkk

[@MikeJack]

Thanks

[@afwAZ]

Thanks for this excellent video. The quality of your photography and the sharpness of the images are unmatched. I found this and your reassembly video extremely valuable. Thanks!

[@MikeJack]

Thanks, I'm glad you like my video.

[@jasonholland8392]

Very nice and precise work. Thumbs up 👍

[@MikeJack]

Thanks

[@scottd9448]

Great video. Wonderful job.

[@MikeJack]

Thanks a lot : )

[@Kalhenwrath1]

Great video, thanks for putting it up.

[@andrewrife6253]

thank God this video exists..... I won't explain any further than that because you can figure out the rest. I'll just put my screwdriver set away and call it a night. now I know (and knowing is half the battle)

[@gabrielpusateri9932]

Thank you for the video,I needed to learn the disassembly process of my gun

[@MikeJack]

you're welcome and good luck.

[@feudingdrums9124]

Thank you, excellent video!

[@MikeJack]

+Daniel`s Armory Thanks

[@ATINKERER]

Very good video! Thank you.

[@MikeJack]

Thanks 👍

[@roberttaylor6030]

I would like to have seen you take the lock out. I recently bought a plug for the hole for after the lock is removed. But still good job on the video I appreciate it. Also I like the non- fluted cylinder, my 686 has the non fluted as well, I've also got Dawson fiber optic front sight and Bowen rough country rear sight.

[@MikeJack]

Thanks a lot

[@Thetabringer]

Your video is great. I underestimated it, foolishly.

[@gwidwock]

Very good! Thanks

[@MikeJack]

👍

[@TheGoatMumbler]

Well done.

[@MikeJack]

Thanks

[@stevenbentley3491]

Excellent video. Thank you Sir

[@MikeJack]

Thanks, you're welcome

[@gunzrloaded]

MJ thanks for the disassembly tour.I've seen some articles and videos on that 'internal lock' having failures.I am considering having that internal lock removed. Cheers

[@MikeJack]

+GunzRloaded I have also seen videos on that 'internal lock' but my never caused problems, so I will not removed that internal lock.

[@voodosforever]

EXCELLENT!!!ABSOLUTELY EXCELLENT!!!

[@MikeJack]

Thanks, I'm glad you like my video.

[@jtd3d351]

Holy shit that’s extensive. The Ruger GP100 is waaaay simpler time take apart.

[@supersanity2298]

Well done. Good instruction video, thanks

[@MikeJack]

you're welcome

[@samuelthurman2731]

I wish you could tell me how that little spring goes against the arm inside the trigger because I can’t figure it out

[@MikeJack]

I tell you here, kzbin.info/www/bejne/q6e1nZ-ohbiZftE

[@samuelthurman2731]

@@MikeJack I figured it out earlier after some time thinking I got it, thank you tho I appreciate it

[@df8600]

Great video man

[@MikeJack]

Thanks a lot.

[@coltonscarbines7589]

My cylinder stop is no longer working, as the cylinder can be spun freely, will a replacement spring and stop fix this? Could that be the only culprit? Or is there something else that could be causing this?

[@MikeJack]

I think the spring is the problem

[@brianonthego]

Thank you. Can the firing pin be replaced without removing hammer?

[@MikeJack]

Yes no problems, cock the hammer back and remove the firing pin.

[@Jtoob-z5n]

A real life Elmer Fudd

[@selaxlife7621]

do u recommend doing this blindfolded inside a closet with the lights off?

[@mattclark10159]

its the arm that connects to the trigger which is spring loaded,,tiny spring...that's the problem im having,getting the arm reattached with the new spring

[@impressiveprogressive7343]

I've a ton of these videos looking for one that does "pinned barrel" replacements, anybody got any info?

[@falcaofrc3997]

Como saber a data de fabricação de um chimit western ?

[@MikeJack]

if you have serial number contact S&W and ask, in English.

[@MikeJack]

Hi Johnjon No i don't read, my big passion is handguns.

[@expo2000000]

Does the N frame Disassemble the same way? thanks

[@MikeJack]

Yes N frame revolver Disassembly-Reassembly the same way.

[@DgesikaAlba]

👍

[@10MilliJay]

Will This Work For All 686 ?

[@MikeJack]

Yes 95%

[@adamkimjong6975]

Work

[@MikeJack]

No I like Guns

[@adamkimjong6975]

@@MikeJack Fanstastik.

[@lebommjohnson8101]

You're reading this procedure from some printed source as you record the video, aren't you ?

[@MikeJack]

Hi Johnjon No i don't read, my big passion is handguns.

[@AZVIDS]

OMG, cannot watch...S&W still using leaf spring for hammer and side plates....just get a Ruger.