Smith & Wesson: Old vs New. Do they make them like they used to?

[@walterminer4990]

Today, I'm seeing an almost re-birthing of interest in revolvers! I'm 71 years young and see a lot of guys my age and some young guys putting their semi-autos in the safe and going back to revolvers! In 1973 I carried a S&W Chief's Special. Now I'm looking at 3" revolvers for a daily carry. The only issue that has steered me away from S&W Quality Control! But, wheel guns won't disappear anytime soon! Nice presentation! Best to ya',,,,!

[@Johnny-jr2lq]

Yeah I have to agree I’m 40 years old now. But even 10 years ago I remember the day I picked up a 27-2 for a song. Actually I kinda won it in a Texas hold ‘em card game. I was kinda like what am I gonna do with this. This thing is freaking ancient. Well I ended up taking it to the range and from the second I started to load it. I fell in love…… that pistol also taught me something very useful. Almost all firearms in decent condition are useful and should be cherished.

[@Octopussyist]

Did you ever have a look at the revolvers Smith & Wesson made for the French police: 3" barrel (approx. - at least as long as the ejection rod) and 9 mm parabellum - with half-moon clips?

[@walterminer4990]

@@Johnny-jr2lq I started with revolvers and 1911's. I carried a 1911 some of the time but my revolver was carried quite often. If people give themselves a chance, quit worrying about capacity, they will enjoy revolvers a lot! One upside to revolvers is your ammo lasts a lot longer at the range. Plus, you will concentrate on shot placement more! Best to ya',,,,!

[@426superbee4]

There nice for a backup, when you automatic is empty

[@billa.2450]

I have owned dozens of Smith revolvers, but the very best of them all is a model 15, no dash, from 1957, in factory nickel with target hammer and trigger. The gun rested practically unfired in a safe for over 55 years before I got it and it has the smoothest action I have ever experienced in a Smith revolver. That smooth action was an original factory hand fitting too, not something that came at an extra charge. Yes, I shoot it, and it is a real pleasure.

[@jimmorrison306]

Had an old one about 27 years ago when I was just married. It was the smooth and might have had an action job. One of the slickest guns I’ve owned. Let it go to buy the next toy. Kind of wish I had kept a few I got rid of that way.

[@bertkilborne6464]

I sold a model 57 about 30 yrs ago to a friend for $250 - He told me that he'd sell it back That gun was from the early 70s But he knows that it's worth about 4X what he paid me for it He doesn't handload so he still has the one box of ammo that he ever bought for it and he doesn't want to shoot it because he'll have to order more since nobody carries .41 Magnum.

[@wolverines_boneclaws5362]

@@jimmorrison306 I see..... um is that really true?🦖

[@jimmorrison306]

@@wolverines_boneclaws5362 ?

[@harrisonmantooth7363]

​@@bertkilborne6464; I'd love to find a model 57 that was reasonably priced. I have a Ruger Blackhawk in .41 mag and I have everything to handload for it. I also have a Super Blackhawk in .44 mag. My .41 mag gets used the most.

[@KSFWG]

My "thing" with the older Smith & Wesson revolvers is that I wanted them so badly when I was a "kid" and couldn't afford them. Now I'm older, retired, and thankful that I can afford them. I have10 older (like me) Smith's that I drooled over in Guns And Ammo magazines until the pages wrinkled and faded. lol

[@rjcorns6837]

Now I’m young and drool over them. But my Glock will have to do for now. Lol.

[@Zona-dw9rp]

Me, too !!

[@mikegriffith4960]

Your story is the same as mine! I’m fortunate to own 12 of the ones manufactured from 1975 to 1990! They are very special to me! I have a model 17-3 that I purchased in 1976. This gun has shot more than 80,000 rounds, I’ve never had even one minor problem with it. I’ve made more good memories with this gun than I can count! It still shoots better than my aging eyes can see to shoot it. Money can not buy it t as long as I’m alive!

[@KSFWG]

It's been 2 years since I post that comment. In that time I have added 12 more to the collection. I now have 11 K frames and 11 N frames. Thanks for your reply, Mike.

[@mikegriffith4960]

@@KSFWG congratulations on being able to acquire some of what I consider the best of the best! I got my first when I was 19 years old! I was hooked. I just can’t get enthused over the “plastic pistols”! I know they are very capable but they are not for me! I’ve always tried to make sure that my skill level with a handgun would keep me from needing a lot of firepower. I have 4 N frames, 7 K frames and 1 L frame. Thank Enjoy your S&W’s!

[@wildestbill.3395]

I’ve owned a S&W model 17-2 master piece 22 lr for over 40 years and have owned several handguns also but this model 17 has taught me more about handgun shooting than all the others, this gun is like an old friend to me.

[@shockwave6416]

Have the model 18-2. Amazing gun. Nothing made today can hold a candle to it!

[@mikegriffith4960]

I ordered a 19 Classic, it was 22 months before it arrived at my dealer! When I took possession of it, I immediately called S&W for a return authorization! The gun had many problems that should not come with a brand new gun! It was manufactured in the third week of July, 2021. I received it during the fourth week of July! It honestly looked like something that you would find in the used gun area of a Pawn Shop. The frame and cylinder were finished in the deep rich black bluing like the guns of the 70’s, the barrel shroud appeared faded from black to gray! The cylinder had a very pronounced wear ring around it! The recoil shield had a wear groove where the cylinder strikes it when closing it! The grips did not fit together at the front of the butt, almost 1/8 inch gap, at the rear, they were fine! I returned it to S&W, they kept it 4 months! Once I finally got it back, it looks and shoots great. S&W took care of all problems! I don’t sell or trade any of my S&W revolvers but I will never have the love for this gun that I have for all my other Smiths! It should have never left the factory in that condition!

[@jst601]

Pictures, or it didn't happen.

[@ditchdigger93]

I have an old original model 27 in like new condition, 8 3/8 barrel and a Chiefs Special air weight that will be in my estate sale someday, or go to my grandson. The 27 isn't just a nice gun, it's a work of art.

[@CrimsonRaven51]

My father was a Chicago Cop when I was a kid and I inherited his S&W.38 Special CTG service revolver from 1955! It has a pinned barrel and a “floating firing pin” as he called it. Adjustable rear sight and recessed cylinder. Also I have his old off duty S&W snub nose .38 Detective 5 shot revolver that he had a gun smith shave the hammer down so he could carry it in his pocket like all the old time detectives did. Also another snub nose .38 Detective air weight revolver that I swapped out the grip for Packmayre grips. I bought back my S&W Model 19 357 Mag Snub Nose revolver that I carried before converting to 9mm Glocks. All Fire beautifully. Like you said, keep them cleaned and lubbed and I can pass them down to my sons.

[@wizardofahhhs759]

The CTG that you are referring to is an abbreviation for cartridge.

[@michaelboss7321]

For future reference, Colt had the 38 Detective Special which was a six-shot snub nose. It was also sometimes chambered in 32 caliber. If you have a 5 shot snub nose it's a Smith & Wesson Chief Special, that's named for its being introduced at an International police Chiefs Association convention.

[@garypelayan6715]

I still have it,for home defense since I only inherited it from my ​Father@@michaelboss7321

[@tumbleweedfarm]

What a beautiful collection of revolvers! Thank you!

[@Deadbuck73]

They sound so clicky and are beautiful! Love em all...

[@LargeCarAce]

I also love the clicky sound on wheel guns.

[@Quality_Guru]

Knowledge is power. I have been looking at purchasing a revolver and the information that you provided has helped me immensely. God bless you for sharing your S&W revolver knowledge with us.

[@BERETTA9mmUSA]

David you camera work was great, thanks for putting this Video Review together. My son and I like Smith&Wesson Revolvers very much. Respectfully, Beretta Sr.

[@Covert_Arrangements]

Love your channel as well. Keep the classics coming guys. Thank you for all you do! 😊

[@frankf7858]

I love S&W Revolvers.

[@kendingus6090]

It looks like you have the same issue I do... There is no such thing as too many wheelguns. I also feel that they are all good firearms..

[@oneshotpete6.591]

When it comes to smith & wesson , older pistols are typically leaps and bounds better than “newer production “ pistols .. I own 5 screw 32-20 , that cycles like glass , smoother than a colt python .. The type of craftsmanship that went into those old guns unfortunately is to never be seen again from Smith & Wesson …

[@johninphx9360]

I just picked up a new 586 classic. I'm happy to say the barrel is perfect to my eye. I was seriously stressed out over the barrel issue videos. I looked it over very closely and can not ba happier. I think I want all the new prodution classic revolvers. Thanks for sharing.

[@johneverett4549]

Today's S&W revolver is only a shadow of the revolver's made 25 years ago or so. Most of the part's now are metal injection molded rather than forged. S&W intent is to have the part's drop in with little to no fitting. Fitter's ( the individual's who assembled the gun use to use a 56 point inspection sheet. The last inspection sheet I saw had 12 inspection point's. S&W went to the two piece barrel system because they lost the ability the align the barrel with the frame. (The procedure is called "clocking") Compared to the older gun's , polishing and bluing also leaves a lot to be desired. The Performance Center Gun's are not what they used to be either. Most are fitted on the regular production line. When the P.C. was a seperate production facility, the gun's were assembled and hand fitted there. A Performance Center action is no better than the action on a regular production gun. I love Smith's but only the older one's.

[@cameronnorton5898]

If S&W were to produce guns in that manner now days they would have to charge 3-5 thousand dollars for them.

[@linguisticman]

​@cameronnorton5898 I think you're right. Having someone sitting there hand-fitting parts, making an hourly wage plus company contributed health insurance...would certainly bring the retail cost of the gun way up. I would be willing to pay the extra money for a hand-fitted gun up to a certain point. But would not pay double. A new N-frame is $1100-$1500 now where I live. I couldn't afford $2500+.

[@jeffhowland867]

They are not the same, but I wouldn't call them a shadow of what they were.

[@zootallure4819]

Old smiths wear out if you use them to any extent. Timing gets off etc. Who does the fitting work these days? Hardly anyone, good luck finding a smith who knows wtf. Ill take the modern stuff. I can do repairs myself with CNC parts that require little to no fitting. I will not pay 3500 bucks for a fitted pistol. 1k gets lead on target just fine.

[@dalejulian989]

You can slowly replace the mim parts overtime with better parts.

[@nevillecartwright7292]

I have a few S&W revolvers but my favorite is my old Model 28 Highway Patrolman (6"). The gun is just such a pleasure to shoot, and is incredibly accurate! It's my backup sidearm of choice when I hunt. Nice video David! Many thanks from South Africa.

[@nt6351]

Hold onto your guns down there in SA, Neville! God bless.

[@nevillecartwright7292]

@@nt6351 Thank you NT - certainly will do! 👍😊

[@ericoverdorff8880]

My father had a highway patrolman I was supposed to get when he passed. I was in a different state when that happened, and when I got his guns the revolver wasn't among them. Somewhere along the route it was stolen. Pisses me off every time I think about it.

[@guaporeturns9472]

@@ericoverdorff8880I feel you man. When my dad died I too was in another state. By the time I got there all of his guns and medals from WWII were gone. Thieving crackhead cousins 😡

[@dapawaz8310]

My Model 28 is the smoothest S&W I own. It's just amazing, even for an older Smith. It was made in 1969.

[@vsmichael1]

I've been a smith nut all my life. I do my own trigger work and as far as the internals I don't care how the parts are made , there is no burrs , mold marks nothing. I bought a spring kit for my 60-14 & after working on the hammer & trigger & installing those springs that piece is smooth as eel poop single & double action. I do think they are made as good now as back years ago. A Ruger you can shoot forever & it never gets loose anywhere, they are tank weapons. My one regret of selling was a colt .38 super in polished stainless. It hit me for $1400 new. I'm sick for selling it.

[@franko3227]

Very nice collection, I also collect S+W but I only have prelock models. The price of the new ones are nuts, hunt down the old ones!

[@wbwills2]

No doubt!

[@matthewlazarus4108]

I have older version model 15-4 made in 82 with firing pin on hammer and newer model 60-14 snub nose with firing pin inside. Both shoot very well.

[@robertkreamer7522]

Super collection my old 38 J frame Chiefs Special never lets me down

[@Irelandrbi]

I acquired a 629-4. Love it. It’s got a hammer mounted firing pin.

[@harrisonmantooth7363]

I realize some years have passed since the original post and my comment will most likely be ignored but, nothing was mentioned about the Model 10. I was really hoping to read some comments on this fine handgun. In the last year, I've bought five S&W handguns. Four revolvers, a Model 29-10, 28-4, 19-3 and, a 10-6 then, a M&P Shield 9mm EZ. I love them all.

[@chdnorm]

I entered law enforcement in the waning days of the revolver. I was issued a S&W model 67 for the basic academy, and bought 4” 686 upon graduation. They weren’t dead solid reliable. They weren’t durable. They’re actually pretty fragile. They always had problems and issues. The armorer kept loaner guns, because he couldn’t keep up with repairs as fast as they were needed. By 1990 I had dumped the revolver, and bought something reliable, durable, and could be counted on. A Sig P226. Vastly superior in all regards, as a service pistol. The current production S&W revolver, at least based on the two I have, are vastly ... and I do mean vastly... superior to anything S&W made back in the 70’s and 80’s. That era was the high water mark of nothing. I’m sure there’s some guy out there that would argue the 1982 Ford Grenada is so much better than a new Toyota Camry. That guy is a fool.

[@JiuJitsuWrestlingStriking]

Troll of the day goes to this guy!^^^

[@chdnorm]

Mitchell Khan I’m not trolling, anything. That’s my genuine opinion. People forget the lack of options and the poor quality that we had to choose from in the 80s. Most departments were revolver only, and most of those were either S&W and Colt, or just S&W. Rugers weren’t widely accepted, even though they were much better than anything Colt put out. Autos were rarely approved, because most simply weren’t reliable. You couldn’t get a Government Model that would feed anything but hardball. Brownings were weird European pistols. S&W 39/59s were decent, but ammunition technologies available still made the 9mm suspect. When the wonder ones showed up in the late 80s, they were leaps forward in technology. It had little to do with capacity. There were finally reliable and durable handguns available. That’s what prompted the massive abandonment of the revolver, by people that had been carrying, and dealing with, revolvers for a living. In almost thirty years of carrying Sigs, I had a trigger return spring break on a P220 once ... that’s it. We are now in the golden age of firearms. They’ve never been better, cheaper, or more readily available than right now.

[@jmsmeier1113]

When I went thru the academy it was even money whether you were issued a S&W model 10 or a model 15. After graduation we were allowed to carry personal firearms provided they were on an approved list, but it had to be a revolver, at least until completion of probation. I reported for my first day of patrol with a 6” S&W model 66 .357 mag. And carried it for eight years only to upgrade to a 4” model 57 .41 mag. That I carried for 11 years. Eventually I was forced to switch over to a semi auto and the department did away with the approved list requiring us to carry the polymer POS they issued. I had a horizontal holster sewn over the trauma plate pouch of my vest for a 2 1/2 inch model 19 .357 mag and considered that to be my primary weapon. Maybe I was simply lucky, but I’ve never had a revolver fail to go bang so long as the hammer fell on a live round.

[@guaporeturns9472]

The early 686s definitely had problems , but to say current production S&W are vastly superior to any S&W from the 70s and 80s is a but much.

[@guaporeturns9472]

@@jmsmeier1113No your right , that dude is talking straight out his ass. Early 686s had some problems but him say all S&W suck just shows how little he actually knows.

[@edwardpetty5401]

I like them all as well, but the old ones are in my opinion better.

[@arthurholmes2210]

There's still some old school gunsmiths out there that can do a better job than the factory without the wait time .

[@curonianvikingidontcare]

Nice guns! A lot of people forget, that the solid piece of metal that parts are forged from, was once melted and poured into a bar from iron ore and other additives. Now a days, with modern metallurgy knowledge, and advanced technology, there is absolutely nothing wrong, with some parts being MIM! Older model 19, were not advised to feed a constant diet of .357, as now you safely can shoot them all day long!

[@richardanderson2497]

Love the honest, no nonsense commentary. Just got my first 686!

[@glorybound7599]

I bought a 1989 686, 4 inch, SS, full lug, 357 12 years ago off of Gun Broker. The weapon came from Detroit and was in excellent condition. I had a 6 inch but condition and handling was less desirable so I sold it. The 4 inch is still my carry weapon in the woods hunting and the only change I’ve made was a Hogue grip for the wood grips which I still hold on to. The pink wedge in the front sight is faded but original. It’s a wheel gun that was built to last and has served me well.

[@DCavalcade]

My grandfather was a Special Deputy Sheriff in Logan County, West Virginia. He carried a S&W revolver with a 5-inch barrel manufactured in 1930. It is as functional today as it was the day it passed inspection at the factory. I no longer shoot it and it can’t take modern ammo. But I’d put standard ammo in it tomorrow if I had to.

[@vabbe71]

What a beautiful collection you have there

[@brianburns7211]

This was interesting to me. My cousin was an engineer at S&W, in Springfield, Mass. This cousin passed away, but I’m sure he had input as to how to manufacture the products more efficiently.

[@greybone777]

Interestingly enough, my well-worn model 1917 is still very smooth DA and still locks up tightly.

[@christianzale505]

Wow amazing collection you have

[@ol-Sarge]

I started in law enforcement in the early 1980s. I was initially issued what turned out to be a pre modal 10 revolver with the 5 screw frame. That was replaced by the department with the modal 13. For off duty I had a modal 36, later replaced with a modal 60 due to being bordered on 3 sides by salt water and perspiration issues. Later we got modal 67s before the agency went to 9mm and later .40 Glocks. I managed to keep all my revolvers when the agency traded them, because the gun shops really didn’t want a lot of used revolvers. Three of the revolvers I got issued were new when I got them so I really have been the only owner/user of them. All have the case color hardened, hammer mounted firing pins and no “Hillary hole” lock. They will all go to my son and grandchildren and make them excellent home defense guns. I figure they will only go up in value as the classic guns become older and fewer on the market. You did a good job making it simple and easy for mew shooters to identify the major changes in Smith revolvers.

[@Megzamani]

One thing you missed are the sights. Round end vs square end. Also screw size are different. Thank you. I have some.

[@PARR53]

I still love S&W Revolvers regardless of the changes. They are well built, durable, accurate and in some ways better than the old guns, albeit not in all ways of course. I plan on getting a new Model 19 classic series in 4” or 586 classic in 4”. I already own a model 29-10 classic 50th Anniversary Model 6.5” and its great gun. Very accurate and well built.

[@ChiefX07]

I love my 586.. I changed to a burgundy/maroon colored grip that looks good on blued gun

[@stolnpckup]

I bought my first 44 at a gun show. It has a four inch barrel. I liked it so much. I got myself a five inch barrel. Both are stainless steel version. Also, when i first got both of them. I cant rememner the grain. But it did or state that it was 1600 feet per second. Yes, it had a nice little snap to it.

[@GunSam]

Jerry Miculek and many others say that the new ones are better than the old because MIM is more exacting without hand fitting and the sleeved barrels can be torqued better while still retaining a perfectly straight barrel with no cants. However the new production classic revolvers are a Frankenstein of MIM parts and the classic full barrels that can "cant". Smith and Wesson makes a fine firearm all the way around no matter when it was made. I did however pick up a newer Combat Magnum 66 and it had a huge cut in the frame under the forcing cone, but like a fool I never inspected it at the FFL as the floor models are not what they bring out. The store took it back the next day and they all agreed at the FFL that it should not have left the S&W factory or the gun store.

[@drdrake63]

Gun Sam _Revolver Aficionado_ Jerry Miculek Gets paid by Smith and Wesson to help them sell new fire arms. Something to consider.

[@RebelFlag61]

Yeah modern Smith revolvers are perfectly serviceable firearms for the average shooter but from what I’ve seen the modern guns are by no means as well made as the P&R guns were.

[@smithn.wesson495]

@@drdrake63 Exactly right. S&W has single handedly made the entire Miculek family millionaires. Jerry is under a big money contract and has S&W as his main sponsor. Jerry is a great guy, but he cannot dare to even think one bad word about S&W.

[@ENWWN]

Very nice review. Very difficult to qualify quality. In my opinion, fit and finish of models prior to ~ 1980 was superior to what is available today but hand fitment was required for that "breaking glass" trigger. However, the metallurgy and material processing of today is leaps and bounds ahead of the past. Many of my mim S&W revolvers have triggers equal to the older models. My complaint is quality control. I've never seen a canted barrel except on the internet, but I did witness a M686 barrel launch itself downrange several years ago.

[@chipsterb4946]

I have a mid-70s Model 25-2 that looks gorgeous outside. However, the machining marks inside made me think some guy who got laid off from the Pinto production line finished it up on a Friday afternoon. Also the cylinder bores are .456-.457 instead of the .454” they should be. A couple of early 1990s S&W revolvers were finished much better inside. An early 2000s 642 was nice and tight, while 15 years later and M&P 340 needed some serious work to smooth out the action.

[@CorvetteStingRayLane]

I use to own a S&W model 686 in .357 Magnum, Stainless Steel with a 4 inch Barrel. In 2008 I traded it in for a Sig Sauer P239 in a 9MM. The following month after I traded in the 686, I tried to buy it back but the Gun Store had sold it. So I bought a new S&W model 60 in .357 Magnum in Stainless Steel from the same Gun Store in Connecticut. In 2009, I sent the Revolver back to Smith & Wesson for them to do a Trigger Action Adjustment. Now the Revolver fires and discharges rounds with a much smoother lighter crisp trigger pull. It was worth every $ dollar to have the Factory make the adjustment and not void the factory warranty on the firearm.

[@frankperi5164]

Great summary video. Well done, thanks. I too have the S&W revolver addiction. For me they are part function and part artwork. I still have a bias for and look for old school ... like me. Nothing against Glock but a S&W revolver is a swiss watch ... the Glock is a hammer. Please let us know how you polish and care for your revolvers

[@b.n.morgan]

My experience has been those old finishes looked good but they did tend to develop rust getting in and out of a squad car back in the 70's. Air conditioning, humidity, snow, rain made constant maintenance a real necessity certainly not like the Glock I carried later. Maybe the new Smiths do to, I don’t know. Best way to defeat rust on revolvers we found was frequent use of a hard automobile paste wax.

[@AlaskanFrontier1]

I love my 29-3 works very well even to this day. Accurate, smooth and will throw .44 mags like nobody's business.

[@Jrome719]

When I hit the streets-1986, we were issued model 10 heavy barrel w/grip extender. All of us rookies after graduation ran to the gun store to replace the wood grips with Pacmier Grips.

[@garyowen9044]

How can you tell a MIM part?

[@lisamangles4878]

.27-2 in 357..with 5 inch barrel..BEST EVER

[@johnross5909]

First grab in a fight is S&W. Old or new because when I'm out of ammo, I can use it as a club if needed. And have no problem knowing it will work in the next fight.

[@jaimemartinez9586]

Thanks for the great video. Your knowledge and humility is what we need more of these days.

[@genghisjohn2674]

I recently acquired a S&W 65-3 and came across this video. Really enjoyed it and subscribed. Will be checking out your other work too. Great job!

[@zmanphx]

I notice a lot of revolvers have sleeved barrels instead of one piece barrel like the Python . I heard it is done for manufacturing to speed up assembly and set the gap. I prefer solid one piece barrel.

[@edvaldoguimaraes2217]

Cada uma mais linda que a outra, quero uma.😁🤩👍👍

[@AK-rq1cz]

What a well made video, your knowledge and ability to explain is incredible! I love revolvers, keeping an eye out for an old Model 57.

[@bglk2310]

.41 mag! had a 657 lost in a divorce.Thought about a getting the classic, might but like you, if I can find a nice older one that is preferable

[@peytontrammel6391]

I have S&W model 57 with 6 inch barrel in presentation case. I purchased this in 1974 on the day my daughter was born. It will be passed on to her. Still looks brand new in the box. You would be shocked on what I paid for it compared to what it is worth today. Also have models 29, 28, and 19 all are pinned and recessed.

[@stuartpalmer3793]

Great video, great descriptions. Love your face reflection @ 10:26

[@donaldwallace1525]

Great video and what a beautiful collection of revolvers. I'm so glad to see a person that is open minded about the S&W revolvers of today. They are simply trying to give revolvers guys nice reliable guns. They are not making these because of their high profit margins. Thanks for this great video.

[@thepossum8569]

I may have missed it, but the new Smiths have a shrouded, or 2 piece barrel. Some claim the new methods produce a revolver of equal or better quality of the old. Me, I like them all.

[@MrBill-mq7ti]

Very nice collection young have. Thanks for the video.

[@lens7859]

Great collection! You and Hickok inspired me , and I got my first revolver, a Smith 686 plus deluxe. Absolutely love it! Not just a safe queen, carry it in the winter and bring it to the range in the summer also.

[@drdrake63]

Awesome! I hope you enjoy your Smith

[@nephisilver3051]

Sorry for the typos every Smith & Wesson I've owned has been awesome !!! I just want something new different and nice to add to the collection.. And Colt has let us all down so bad it's not funny !!! 😭 my Smith & Wesson Model 29 is a awesome gun I can't say enough good things about it !!! 😎

[@williamhewett1098]

I have a s&w model 10 i bought for my dad in 1976 we took it out and fired it 5 times thats it. Now she is in the beautyshop getting a make over new barrel 2 inch to 4inch ported new trigger and hammer and grips gonna be interesting.

[@daspiper8941]

~I bought my new 4 inch 586 in 2016 and I like it much. Mine is an accurate shooter so I assume the barrel is straight. It looks straight to my eyes as well, so I'm good. Yes, it's Blued Finish reminds me a lot of my Python's Blueing; just not as deep. That's what caught my eyes when I was visiting my LGS. ~The 586 is my first L-Frame S&W Revolver with my other two being a J-Frame. ~I switched from being an avid Colt Revolver Fan to an avid S&W Revolver Fan when I ran out of Colt Revolvers I wanted to buy. I no longer shoot any of my Snake Guns. ~I personally like the Mat Finish on the K-Comp you have. It may end up on my Want-List. ~I do not shoot .357 Magnum rounds through my 586.

[@Elvis68spec]

I love the classics!

[@service1956]

Looking at that 586 and pausing the video at 12:14, it looks as if the barrel was not properly aligned to the frame according to the cut serrations on top of each piece. Or the serrations were not cut on center on either of each piece. It only makes one wonder what the rest of the gun looks like that you cannot see on the video.

[@partriarch]

I bought an old S&W Model 13-2 .357 Magnum used in a pawn shop in 1980 for $150.00 (+tax). It has a 4" pinned bull barrel, recessed cylinder, a pinned firing pin in the hammer, a square butt, and a well worn deep blue mirror finish. The barrel seemed badly damaged near the forcing cone by the previous owner, which is why I paid such a low price. I cleaned the bore for several hours with a brass brush and discovered the "damage" was just lead build-up which was never properly removed. At the end of my work, I had a completely clear, mirror bright bore from the forcing cone to the crown. This year, I bought a new S&W Model 66-8 .357 Combat Magnum in stainless steel, with a 2¾" shrouded (two piece) barrel, an adjustable "target" rear sight, a round butt, and the action lock (Hillary Hole). Both are K-frame revolvers and are accurate to a fault. I have noted that the older Model 13-2 has a far smoother trigger than the newer Model 66-8. This may be caused by all the rounds which have gone through the older one, while the newer one isn't quite "broken in" yet. Time and use will tell if the trigger will smooth out. Interesting and informative video

I have a 1977 Model 13-2 (pinned barrel, counter-bored cylinder) 4" that I took off of one of my clients in exchange for a $250 tax return prep fee he owed me (I'm a CPA) about 20 years ago. It was formerly a TX state trooper service revolver. It had been re-finished in a dull blue, had a very slick trigger job, Pachmayr grips, and shot lights out at the range. Still the best shooting revolver I have.

[@kengray5793]

I’ve had problems with one new 686, and I just went and looked at a couple -3 and -2 revolvers. They were in nice shape visually but the cylinders were extremely loose compared to even “used” newer guns.

[@rpbajb]

I had to send a Performance Center Model 945 back. A defective sear caused the hammer to intermittently decock and follow the slide down when cycled. Now that it's fixed, it's pretty sweet, though.

[@clark4041]

Thank you for your wonderful video! And for teaching me about Altamomt grips-I had not heard of them.

[@andrewwallace20]

I think this collection of Smiths is great and would love to have the lot of em. All of them finished nicely!!!

[@mitchellburke6376]

I'm a die hard Smithy fan. Whether I'm looking for a wonder nine or a classic roscoe, I'm going with their products.

[@mrcolin2u]

I’ve got a 30 year old 629 classic I bought new . I’ve only put 60 rounds through it. I recently tried a new Ruger GP100 because I’ve been wanting one for a while but after inspection I have decided to go with a S&W. The Ruger action and finish seems crude compared to my silky smooth S&W.

[@richardwieder7191]

I have 3 S&W's a model 38 airweight bodyguard, a model 39-2, and a M&P 45 Shield. I consider all of them fine weapons.

[@abe1365]

I love all of your videos Sir. I grew shooting revolvers and have recently gotten back into them. Thanks for all of your videos!

[@russelder9743]

David-----as usual, great learning video. I always come away with more knowledge then I had.........thanks buddy

[@Ca.GunGuy]

Great video old timer i learned alot and truly appreciate videos like this. Salute to u

[@kevwalker430]

They are all stunning wish our nanny state(UK) would let s have even just one

[@troy78]

Love your content, especially the Smith wheel guns 👍🏼

[@1970jstone]

Those are all beautiful pieces. It is so hard to get them in CA...but I'm still looking and won't give up.

[@oldcop18]

What I don’t like on the newer S&W revolvers is that ugly keyway/internal lock above the cylinder release. It detracts from the pride of ownership, I don’t trust it b/c it’s not necessary and I refuse to buy one. My favorite S&W is a four inch 1973 Model 66.

[@oldcop18]

Courtney Tokas What bothers me is S&W caved to political correctness by adding the lock, an unnecessary feature that has caused some guns to malfunction in the past. I believe the company corrected that problem. I have shot some of the lock revolvers w/o any problems but it’s just something I’ll never trust.

[@bassmangotdbluz]

@@oldcop18 Actually the oppression of the Clinton Administration forced S&W into BANKRUPTCY. This cooperation is all that saved them. Just another good reason to HATE Bill, Hillary and their Demon Spawn, Chelsea even more.

[@markhoughton7326]

Am I wrong ? Nothing like a Smith 686 .357 stainless K frame ! BEAUTIFUL great balance and shooter.

[@bassmangotdbluz]

@@markhoughton7326 686 is an L Frame.

[@markhoughton7326]

@@bassmangotdbluz yes it is don't know what I was thinking.

[@zivendine]

I have what I consider an oddball a Model 19-4. Recessed cylinder, hammer mounted firing pin but it does not have a pinned barrel. I suspect it was some kind of a transition model. A few years ago I saw another 19-4 on a gun show table and it had a pinned barrel with service grips. My 19-4 has a serrated trigger and target hammer and the original factory installed target grips. I got it in an even swap for my 4” 28-2.

[@davegeorge9538]

I have a 25-5 in 45 colt, and a 610 both with 4 " barrels, both great guns.

[@wayneedward7391]

Revolvers deff can be a investment Smith and wessons can hold there value in most cases they grow in value not like auto pistols they have become like electronics the new model comes out the older model drops in price well except for Glock they only drop a little bit but they still drop in price

[@garyacker7388]

My model 13-2 has the pinned barrel and is counter sunk cylinders. Beautiful weapon! 😊

[@757optim]

I'll never own a Hillary hole. Are the scratches on the frame at 8:19 from trying to hit the Hillary hole? (Note: You can't get the hammer mounted firing pin replacement part from S&W anymore.)

[@quinnjim]

That is not a scratch. It's an arrow telling you which way to turn the lock key.

[@757optim]

Perfect. From the ridiculous to the sublime.

[@1941392]

Add a little hair around the hole for better locating.

[@drexq_477]

I've been watching your videos and they are very very awesome especially how you break the firearm down and clean it and put it back together I have not seen a video yet yours was fantastic.

[@geradebowden3293]

I have s 4” 686 no dash, s model 10 3” barrel round but . Love my Smith and Wessons

[@teamstucker624]

Great video I like old and new Smith and Wesson revolvers are my favorite guns N Frame and L frame K frame I'm on the fence 66 are cool 19s interest just a bit. Nothing beats a 28-2 4 or 6inch barrel in the hand what a monster handgun.

[@k9m42]

I can say with much confidence and experience the double action trigger on the older Smith's are far better than new ones.

[@mbogucki1]

Are you comparing apples to apples, as in each gun has the same amount of rounds through it?

[@mr.alaska2232]

I love the old stuff I have a 10-5, 49 bodyguard and a vintage 36 looking to get a model 37 and a 4" 29 next

[@mafirearmsafety]

Mine is a couple years old. Listen to this. The cylinder pawl on my S+W model 69 would not engage the cylinder, leaving the cylinder to freewheel around. It eventually did work again but that was all I needed to see to not trust the revolver. S+W was notified and sent me a shipping label to send it in for closer inspection. That condition could have been a catastrophic failure sever injury or death. I have owned many S+W revolvers and this was an issue I had never seen before. I have only put a couple hundred rounds through this .44 magnum, there shouldn’t be any issues. at this point.

[@RebelFlag61]

I appreciate well made firearms but I’m not a connoisseur of Smith & Wesson revolvers. I’m perfectly happy with my not pinned, not recessed, MIM, Hillary hole 586-8. My main complaint is that I had to turn down 3 examples of this revolver to finally get one that didn’t have a canted barrel. I’m Just glad my LGS was willing to work with me to get one with a properly aligned barrel. But anyway, the finish is great to look at, it’s properly timed (except for drag marks), it locks up tight and has a sweet trigger. It’s not a cheap revolver by any means but the quality really stands out when compared to most anything else on the new gun market.

[@SupertankerPrime]

Every S&W revolver fan should pick up a copy of "The S&W Revolvers: A Shop Manual" by Jerry Kuhnhausen. I believe the 5th edition is the newest. He explains at length the inferior, but cheaper, manufacturing methods S&W uses now. His advice on repairing MIM parts is to switch to forged parts if available, or just refuse to work on the latest guns at all because of the potential liability to the gunsmith when they fail. He backs all of this up with photos of guns that failed exactly as expected from their current construction. The Performance Center is basically how all S&W revolvers used to be made, but they are still stuck with MIM parts. I love my S&W revolvers, but I just patiently watch for used guns in decent condition that still have pinned barrels and forged parts.

[@NickAkins-iv2jx]

It's been downhill ever since some numbskull decided to shave $2-$3 off the end price of the hand ejector... Certain precedents should not be set

[@karlyoung5089]

@@NickAkins-iv2jx You are so right Nick.

[@cartmill68]

I think they’re all great the only reason I’d want some of the older ones more is for the nostalgia.

[@strateshooter1402]

So , you don't understand WHY the older models are of superior quality ? You need to read more and comment less .

[@scooterbob4432]

My friend got his brand new Model 637 airweight 3 weeks ago (almost $800 out the door) and was a little disappointed because it took quite an effort to open the cylinder. I never have a problem with my old Model 60 which I bought ages ago for $350.

[@silverhorder1969]

I’ve seen videos on the .357 & .44 mag with key locks where the recoil of the gun engaged the lock. Yes it is rare but I definitely draw the line on the key hole! I don’t need a gun company trying to protect myself from me! I know when my gun is loaded. I also always treat it as if it was. No S&W with key locks for me..

[@drdrake63]

silverhorder1969 ‘I’ve seen videos online’ A link would be helpful

[@silverhorder1969]

Here is a link to one I saw on KZbin. I saw another one a couple of years ago with a S&W .44 mag that the key lock malfunctioned on it too. However I was not able to find it. m.kzbin.info/www/bejne/oquumWiPZbmUj5I

[@cincinnatifunk]

I've it in person more than once. The Hillary Hole is and has been a deal breaker. Rugers simply dont have them.

[@howardkahn4330]

they make them today smaller, lighter and cheaper, but they cost more and labor and material is not the main reason for the cost, GREED IS !

[@robertrosenberg6354]

spoken like a true idiot

[@kevinuspsa9353]

I bought two brand-new S&W’s in 2018. Both had serious issues from the factory. The 642 I bought would fail to turn the cylinder about every 8th-10th round and the 69 I bought would fail to reset the trigger after firing and it would stick in the rearward position. Inexcusable for the price they charge. They agreed to fix them, but that’s hardly the point.

[@keving52002]

This news you've stated, was about as equally shocking to me, when i found our Craftsman's tools were behind made in Taiwan. S&W has along and proud history of revolver making, to let it go down the tubes.

[@jeffreybissette2762]

Beautiful guns, Mr. Drake. Great tutorial! I learned a great deal. I own a s&w 9mm 639 and I've been wanting a revolver for so long. Trying to learn more and make the right decision upon purchasing, for me.

[@daveshadenuff187]

I notice revolvers aren’t a thing like they use to be,but I feel it’s because of the whole red&green dot thing going on with polymer frame semiautomatic striker fired guns.I think everyone feels they need a red or green dot now a days to shoot a gun.I have one so I’m not being a hypocrite,but iron sights are just as good,if not better in some cases.

[@1776goodfight]

I bought a 686 performance center in 2015. The first round fired (no it wasn’t hand loads, quality 357 name brand ammo) caused a not normal sound. I thought squib load, however couldn’t get the cylinder open. Had to be hammered out with rubber hammer. The bullet was stuck in the forcing cone and a visible crack could be seen in the cone. After 4 months of back and forth with Smith ( the ammo manufacturer asked to have the remains ammo in the box to them) they basically put on a new barrel , but said it was the ammo. Smith also had an attitude with me. Saying I was lucky to be getting it fixed. The ammo company said they didn’t find any problem with the ammo, but for the inconvenience they sent me 500 rounds free. I sold all my Smiths as if their customer service is that bad and all of it I gave up on them.

[@flybouy11]

I have a M&P 360 that I had to send back because it would not lock up with cylinder and barrel. They fixed it and completely refinished.That is the gun that has cylinder made of scandium a rare earth element.

[@gm5564]

What was the reason for the older guns having firing pin bushing issues? the Model 19 and models 586/686 had that issue, they were modified and marked with the "M" stamp.