Thousands of Retro Games in Your Pocket with this DIY Emulator!

[@joel9240]

I am genuinely ridiculously tempted by this.

[@snazzy]

Do it! I had a blast building it, the thing runs great, I'm finding myself actually playing it (which is unusual for my DIY videos lol), and the price is right!

[@RetroMMA]

No sound? No thanks. No offense. Heh

[@thaddeussm8169]

Snazzy Labs you could probably set up sound using a micro usb to headphone jack adapter. Then it wouldn’t require much more if any extra space in the enclosure. I love RPi projects. If you like emulation/retro gaming you should look into Arduboy if you haven’t already.

[@ياربافتحليابوابافتحليابوابرحمت]

ThaddeusSM Andeoid supports emulators. Far easier than this with full sound.

[@mrcokez1]

go for it, i made mine with audio and its not that hard at all.

[@em9594]

You need to mention DO NOT cut both the red and black wire at the same time if your cutting it off the battery! shorts happen INSTANTLY just for safety ONLY CUT ONE WIRE AT A TIME!!!!

[@enclaveofficer]

I learned the hard way cutting live wires together in a household. Never again.

[@em9594]

@Username0662 it was! He cut the wires right off the battery! If he hadn't gotten lucky and cut the wires clean, he could of fried the battery and caused it to explode!

[@thenugget3671]

Awesome advice! Thanks

Right, he was fortunate however because his battery has a BMS.

[@ShankMods]

This is a well made video, and probably the best pi portable console video I have seen to date. However, I do want to point out that you should NEVER cut both terminals of a lithium battery at the same time. The metal in the scissors is shorting the two terminals together, and a shorted lithium polymer battery can explode in a firey ball of infernal rage. This is extremely dangerous, so try not to do that again. Keep up the good videos!

[@wiggy8912]

Shank Mods you clearly haven’t seen very many Pi portables.

[@z32racer1]

I thought the same thing when I saw him cut it like that.

[@Y4shP]

Ummm I think Wiggy is right, stuff like the "Minty Pi V3" by "Sudomod" aka "Wermy" is much easier to build, doesn't require mush saughtering at all, and much more premium.

[@slembcke]

Holy crap yes. I've melted wires in little RC models with batteries that size because I didn't bother to test for shorts before plugging them in. If that battery was much bigger you could have spot welded the wires to your cutters and had a burning battery. No joke! It would only take 10s of amps to do it for smaller wires.

[@joshuajefford3323]

Shank Mods hey shank i love your wii portables

[@maybemc1498]

Weird flux but ok

[@acidix_games]

I see what u did there

[@23nguyenthanhlong49]

@@acidix_games that was smooth

[@mikeb6923]

Haha, this comment is gold! And your picture makes it even better

[@fezt.v.1569]

Ha

[@kirbystar1]

Pun

[@domino52o26]

I just think its the craziest shit ever that all the old games we used to play on those big heavy consoles can all, every one of them, be played on a tiny little device, it just blows my mind.

[@snazzy]

It is pretty wild! Especially when you consider the tiny little Pi Zero is what does 100% of the computational work. And they cost $10! Pretty cool.

[@domino52o26]

Yeah it's definitely incredibly cool.

[@Venatorion]

@Joe Blow Let's hope we get there... There's a lot of people worried out there in the world about world war 3. It dosen't help with how chaotic things are and that the news dosen't cover corruption too well, and all the infighting the western world is having, I swear someone wants to piss us off and get us to become aggressive with each other right. Hopefully things chill down, and people stop pushing AI Tech to much or looking into the new too dangerous potential modern world weaponry choices that can't be controlled in the modern world.

[@tonberryhunter]

Cell phones have been able to do this for about 10 years now. My 200 dollar cellphone runs PS1 fullspeed and even Dreamcast.

[@another3997]

@@tonberryhunter And does your smartphone have all those dedicated physical buttons rather than an inert touchscreen? When you play games, listen to music or watch video on your phone and flatten to battery, what happens when you need to use the phone? Carry a charger or spare battery? Might as well just have a separate device in the first place. Smartphones aren't the answer to everything. Why not have a console, tablet or laptop for better games on the move?

[@baardi2]

Video description: "Let's build the best size, no-compromise, retro handheld gaming console." No sound...

[@jensswieringa846]

I think sound aint that important imho

[@jayson1505]

Doesnt the pi have BT tho?

[@leonardodeluzio]

The Gameboy Null 2 has you covered. Two speakers AND headphone jack.

[@UnboxMaster]

This video is sponsored by flux...

[@UnboxMaster]

@@BhargavGV Most likely so...

[@sajadh4542]

BhargavGV dont be silly

[@happyarch5365]

Flux isn't s brand.

[@yashazare]

and tape

[@cthulhuhasrisen1009]

That made me chuckle, thx

[@PLr1c3r]

Did you just use flux on a capacitor? doc brown would be proud!

[@edstar83]

I c what you did there.

[@coler154]

its a resistor

[@manOmanyTrades]

Great video. I have been soldering since the early 90s and have always used rosin core solder which works great on large gauge wires and small pinned circuit boards but is impossible when using SMT components. Using separate flux is amazing and a total game changer. Thank you so much for that tip.

[@joshuak4553]

For audio, you have two options with the Pi Zero. Analog/pwm pins with a low-pass filter (and amp like the PAM8302) + adding a dtoverlay line to /boot/config.txt ........OR, a small USB sound card adapter. And a 10k potentiometer or something for adjusting volume

[@TimeFX]

6:53 cut both wires one by one, or you are going to shorten the battery (if you shorten the batterys, it hurts them, but doesn't destroy them)

[@snazzy]

This is probably a good suggestion. Didn't even cross my mind. Thanks.

[@TimeFX]

No problem ^^

[@ciarfah]

smpl. TimeFX Minor nitpick, but I think you mean 'short'

[@TimeFX]

short circuit

[@stefanbehrendsen330]

Yeah, that part scared me a little.

[@BikePackingPleb]

Ive been soldering for quite some time and ALWAYS had problems with ribbon cables, I was watching for fun and learned something that could have changed my life 10 years ago.

[@stealthasf6903]

Well that's odd, Linus said that NordVPN is the fastest VPN...

[@egg4861]

Hmm

[@DTS214]

Linus>everyone else

[@alfredbanuelos7312]

almost as if he got paid to say that.... hmmmm....

[@godofwinetits3826]

that dude only says what he reads in his script, blame da script writers

[@KnuxKitsune]

I thought it was PIA

[@orrinbarabor1387]

It's so wonderful to watch someone discover the satisfaction and jot of proper soldering. If any of you aren't sure about this project because of the soldering; I urge you to do it. It will be fun, and rewarding when you get your awesome new toy at a fraction of the price you can buy these things new for. Enjoy!

[@Chukijay]

If you’re here and follow Rossman, be sure to add a Milli-Paul amount of flux whenever possible.

[@snazzy]

😉

[@SianaGearz]

Look it isn't actually THAT much flux. Think of the magnification that guy is working under, it looks like everything is flooded but really it's just a little tiny droplet.

[@oCMSo]

doesn't change the fact that flux is magic!

[@Chukijay]

As someone that does the same thing he does for al living, it's a lot of flux. That's the joke, though. It's all good. He does work under some wicked magnification.

[@rodriguez8572]

J W wtf that’s my name am I high right now

[@Null_Experis]

Correction: Flux is a weak acid that strips oxidization from metals when activated by heat. This allows the solder to adhere much better to the metal, as there isn't a metal oxide layer blocking it.

[@KevinTran-hpk]

6:08 does that also work with other flux or just this one?

[@Sonic6293]

While I don't have the patience for a DIY project like this, it's rather neat.

[@snazzy]

Thanks a ton. You should give it a shot anyways! Once I had the 3D printed parts, the whole thing really only took about 30 minutes. Fun weekend project. :D

[@dstarr3]

No joke, this video is actually one of the best soldering tutorials I've seen on KZbin.

[@alastairbutterworth3495]

“If you have rosin flux just throw that away” and now use this rosin based flux I’m promoting 😂

[@prismlightning]

That was crazy how you soldered that ribbon cable so fast!

[@darkhawk123]

Did you cover the HDMI port?

[@carlosmarques8380]

this is honestly one of the best models of diy consoles iv seen so far, its gameboy sized but with nes, gb, gbc and gba for free, you could get a headphone jack to avoinf the space of the speaker and you could get audio that way

[@fibreglassmonkey]

Glad you like it! Thanks for featuring it in a video :) You didn't fancy the acrylic case? (that Alister Savage at 6:33 is me)

[@snazzy]

Great build, man! Enjoyed it a lot. Hope I can help you sell a few more boards. Acrylic was cool, but I wanted to implement the 3D printing angle. :)

[@fibreglassmonkey]

At 3:25, you mention that some of the pins were mislabeled in the documentation. I just whipped out my multimeter and checked, they're all labelled correctly, I think my choice of colors is probably the problem, sorry about that.

[@snazzy]

Might be my fading eyes. Haha. Maybe numbering by pin? Idk. Sorry for the error. Great documentation, btw! 👍

[@Natelok]

this video immediately made it to my re-watch list. I'm definitely going to have to get myself one of these soon. I was sad when the most reputable rom sites went down but with this I'll be playing all my favorite roms again in no time

[@HeyMarkL]

holy shit! Really cool video Quinn! I really enjoyed this.

[@snazzy]

Thanks a ton, Mark!

[@MrVidau]

It's crazy how charismatic you are. I'm absolutely never going to attempt this, but I thoroughly enjoyed watching the whole thing. That's gotta say something. Good job!

[@snazzy]

Thanks, Lucas! This comment means a lot. I try really hard to make videos entertaining for everyone-even those that don’t intend to actually do the project. :)

[@TravellerHD]

This video has convinced me that flux is witchcraft. How did you not bridge the connections on that ribbon cable...

[@snazzy]

IT IS MAGIC!

[@domino52o26]

Surface tension and the pcb surface is coated with a solder repellant of sorts

[@iuliancalin22]

r/wooooooooooosh

[@FlyWithBurton]

that's just soldermask

[@megaman616]

was thinking the same! i use flux but had no idea i could do that lol

[@Arkanien]

I'm a SMT engineer (Surface Mount Technology, the tech were that chip resistor came out) and this project is really great. Regarding the Flux, this is used to help the solder stick onto the PCB (Printed Circuit Board). I would advice better to apply the Flux before soldering the chip resistor, and that is going to help a lot. I don't know how much info you can get when you buy this product, but usually the solder is chosen based on the PCB materials and the final purpose of the product (among many other variables, but in this case these two are the most important). The most common solder alloy could be SAC (96.5% Sn + 3%Ag + 0.5%Cu) but you can get something like 100%Sn and it's going to be good enough (and cheaper). Just please please please, stay away from solders with Lead!!!! hope this helps someone ;D

[@axMf3qTI]

"I don't solder" buys an Hakko.

[@KRAFTWERK2K6]

"I never solder. But when I do, I use Hakko".

[@tiskolin]

*a Hakko

[@skins4thewin]

Dude either has more money than he knows what to do with, or he's sponsored.

[@cthulewtrlyeh153]

He doesn't solder, he sodders 😂

[@seanelgie]

Or he hadn’t soldered much before, but wanted to start doing it more often, so decided to spend on the tools since he runs a tech channel.

[@matthewdilger6755]

Great job and awesome build! Just be aware that flux is both conductive and corrosive. Make sure to clean the board with a small brush and some alcohol. Solves the problem easily.

[@TechWithBrett]

So awesome! Since you have all the tools can I just buy the stuff and come over and you help me put it together? I'll bring lunch.

[@snazzy]

😉

[@KelsomaticPDX]

In awe at the size of this emulator. Absolute unit.

[@dylanmurphy7942]

Flux for president​

[@snazzy]

#Flux2020

[@pemirsa]

I don't remember why KZbin suggest me this video but I'm not disappointed. great video. complete & detail instructions, delivered in perfect pace. well done

[@elwoodwinn]

"There are three rules to soldering: the parts must be clean, the parts must be clean, and the parts must be clean" - My Dad (after recommending I use flux)

[@sabin1981]

Not only was this an entertaining and informative video, but the way you describe and go through everything step by step makes things incredible easy. Great stuff! Thank you, subbed :)

[@juggawest]

how about Bluetooth headphones? is the pi have bt built in or a usb addon?

[@mateuszviste]

It's cool and all, but is such soldering really solid? I mean, the soldering of "holes to pads". The handheld will get different kinds of torsions and vibrations while in use, I would be worried that the solder in holes breaks and leads to bad connections. I would be tempted to use some go-through pins instead, but that's just an intuition.

[@YoutubePizzer]

Thank u for the hand holding throughout the video, I do like to be taught how to do this stuff while being entertained

[@dateraped.1323]

Me too thanks Dad 😊

[@GameIsMyOxygen]

Came for the DIY handheld, left with an itch to flux and solder everything around me. great video man! :D

[@islasgalapagos8514]

Every time when someone tells me "Look, it´s verry easy" is because he knows how hard is it, ando is often hard.

[@Adamseslar]

Any idea where can I go about getting a PCB like this, seems like they are out of stock/not making them. I have a 3d printer and I really want to do this project with the kiddos. Also any suggestions on a different screen for on the go play?

[@ssymessi]

What’s the battery life and how do you recharge it?

[@gustavo33413]

"Oh shit I forgot about the recharging stuff..."

[@radomane]

Completly enamoured by the size of this lad Absolute unit

[@snazzy]

😂

[@Techninjaspeaks]

wow man.

[@snazzy]

Thanks for watching, Kev.

[@yahi06]

we can add leds and mirrors to make the screan brighter, for the audio add a 3.5 mm audio jack. i wonder if they already fix it look like a cool project

[@joelsimpson7638]

Could you add a headphone jack without changing the form factor?

[@vargabazsaa]

With a little modification of the housing, and only if there is a big enough place on the motherboard to be cut out, but probably yeah

[@OhSoTiredMan]

I mean you would need to modify the circuit board and stuff which would make it cost more

[@DoRC]

Based on what i saw i wouldnt suggest this as a first solder project. Also without a decent iron, fine tip, good thin leaded solder and yes good flux this will be a challenging solder job even if you have a little bit of experience. I think having the ideal tools made this looks a bit easier than it would be with an old unregulated hot poker and a 20 year old roll of 1/8 diameter flux core.

[@zollotech]

Well done...Love it

[@snazzy]

Thanks Aaron!

[@3DJapan]

2:10 Thank you for using "the bomb" correctly.

[@mrbattleX]

I'm telling you, he's the tech version Doug de Muro

[@snazzy]

Or wait... Doug de Muro is the car version of me. ;)

[@bahotm]

@@snazzy If you are daddy, Doug is granddaddy. Sorry man.

[@georgemoralee5809]

Your voice is exactly the same

[@diandracats]

I couldn't open the web ,oh this isn't doug

[@dawids4559]

Only this this guy isn't super annoying.

[@quinnvu1145]

since I don't have a multimeter, and I guess lots of people are in the same stand. Could you tell us which pins that you solder? thank you!

[@shritanyenneti5622]

Just wondering, where do you get the games onto the Pi

[@J-wm4ss]

There's a ton of rom sites. Google them.

[@zay9050]

Go to r/roms on reddit, follow the rom link megathread

[@8bitsamurai6]

Nice just modded a 2ds but this would be a fun project. What's the cost tho?

[@Splackavellie85]

I’ve been trying to do something like this for over a decade, ever since running emulators on the GP2X and PSP Go. I’ve had every handheld ranging from the Nvidia Shield to the GPD Win. While the GPD Win 2 is pretty close to the perfect handheld gaming powerhouse for me, it’s also expensive as hell. I’m definitely going to try this! Would be perfect to give to the kids instead of my GPD Win 2

[@snazzy]

Agreed. This thing is as durable as all get out too. Would be an awesome build!

[@Splackavellie85]

Snazzy Labs Just took the time to actually watch the video, instead of clicking Like right after posting my reply. I’m definitely going to order the parts for this thing tonight, just have to shop around for the cheapest shipping to the Netherlands. Your NES-cartridge emulator is still working perfectly. Hopefully, this will turn out at least as well!

[@mynameisprivate158]

GPD Win 2 hahahah I can get a GTX 1060 powered 17 inch full laptop for the price of the GPD Win 2..... Thats a GPD Loose if you ask me!!

[@Splackavellie85]

myname is private Good luck stuffing a 17” laptop in your pocket. And good job on totally missing the point.

[@LelandHasGames]

So, go easy on the flux. Also, you should clean all of your solder joints after you use flux, wick, or even solder for that matter. Wick and solder both usually have flux within them. Even if it says "no-clean" flux, you should still clean it. Some of the materials used in flux can eat away at contacts, traces, and the substrate. Not all flux does that but, it's just good practice to clean everything. Otherwise, an all around good project. I would never recommend a hakko soldering station (which I know you didn't) but, you should always give examples of cheaper alternatives. For fine solder work, never suggest a "20 dollar soldering iron" because those are not good or precise enough. Trust me. I learned the hard way.

[@5ky502]

Can you recharge the battery or do you have to remove it once it dies????

[@cirkuitknight]

TcT Videos 101 it’s a rechargeable lithium polymer battery LiPo and is charged using the TP4056 board. Just plug in a micro usb charger and you’re good to go

[@5ky502]

Ok

[@OhSoTiredMan]

It is shown near the end of the video of installing the micro usb

[@Vanpotheosis]

Can I use rosin core solder with flux on the side or do I have to get regular leaded solder to go with the flux? I'm pretty good at soldering and welding jewelry but I haven't used flux for soldering before.

[@blakryptonite1]

Be careful. Nintendo is going ham on giving out copyright strikes for anything emulation-related, particularly related to their systems.

[@snazzy]

Reggie is my buddy, but I'll be on the lookout. Thanks. 👀

[@matrix12x]

Nintendo has lost in court multiple times in regards to emulators. However, Nintendo can and do protect their ROMs under trademark and copyright.

[@lazloboloni]

@Prometheus Can you share those awesome 16 gb games, please?;)

[@light_fos]

cough Emuparadise cough

[@asishmohapatra5038]

Prometheus where can I find your roms page ?? link please

[@andrewhawkinson3915]

Do you have a link to instructions to add sound to this project as mentioned in the video? I love the form factor but wouldn’t mind changing it slightly if it added sound.

[@rushabhodedara4961]

8:10 “lol ya aint getting any password ya goons” 😂😂

[@Omizuke]

Plot twist: That it's actually the password. XD

[@tylerberry7306]

@SnazzyLabs did you add the ABXY to you buttons or did the files you used for printing already have that?

[@bharatmadhok6773]

How about downloading an emulator on your phone

[@mathiasdeweerdt1400]

Is it possible to get a better screen for this? I know it would increase the budget by a lot, but I'd rather have a good screen for outdoor usage.

[@Gr3atsaga]

It was rather crass to leave out the fact that there was no audio device in the build until the end of the video. That should have been noted from the start. It also doesn't make any sense to do a project like this and only half ass it. On top of that, you have left your viewers wondering what would need to be done for audio as you just merely say "Oh, you can do it if you want". How is that acceptable?

[@jonathanporter5223]

Agreed.

[@matox01tekk]

it looks very tempting to do by my self but the display is terrible and the missing sound you said something it would need to be bigger to have sound but is there alternative for better display brighter IPS maybe ?

[@JetBen555]

Do you know a similar kit with a better screen (IPS?)

[@driftinsti]

Great video except for one thing. I'd recommend against cutting the positive and negative wiring of the battery in one snip as you may risk shorting/damaging the battery. Cut one wire first, strip it and solder it on. Then do the same to the other wire.

[@cleverestx]

I really want to do this, but a version with audio (headphone) capabilities.

[@wizfajitacheese2406]

4:04 You can't really breathe lead unless it turns into fumes which it hasn't the boiling point of lead is over 1,000 c* and unless it's boiling it doesn't turn into fumes so you can't breathe it. The fume are actually coming from your flux that is inside the solder.

[@luisfelipebayardomelgoza4104]

But does it run crysis?

[@danielisarting4992]

its allready dead. dont kill it more

[@another3997]

@@danielisarting4992 "It's", "already", "don't". Or "It is" and "do not". Did you miss many English lessons at school?

[@OhSoTiredMan]

@@another3997 Im vewy sowy fow naught bein aple to sel praperli

[@HelloQro]

Couldn't you just put a 3.5mm Jack input and let the sound come.out through headphones or external speakers ? Does the PCB have a pint for where the audio should come out or would you have to wire it directly to the pi ? Anyway this is some really cool project I hope to get my hands on soon enough :D

[@Aepek]

Would be cool if when making case, did design on back or your name! Cool vid & day device. Now just wish had 3D Printer like yours, 😉 Can you get buttons that have a membrane or silicone backing on them for better "pcb contact"? Also, can you get a better display for this, and other mods? Cheers, A👍🏻

[@JasonBolte]

Nice build. I may consider taking this on.

[@RedVGFox]

Why people don't just buy a cheap PSP and hack it?

[@nizostyle]

RedVGFox building it is half the fun

[@noobit4937]

Building it give you a sense of accomplishment. Also, why buy a cheap PSP. Your smartphone phone should be fine unless you want to feel the buttons.

[@outsidercain3038]

I do buy a PSP because I lack the skill and material (3d printers / soldering tools etc..) But one day I know i'll make my own arcade cabinet and small handled

[@gustavodelacruz6313]

It's old,and Sony doesnt make it anymore so good quality parts are harder to get

[@hugohoyos2828]

yea i just hacked my vita. i get that people who do this do it for the building part of it, but those "asterisks" at the end kind of killed it for me. i was sold until the end where the guy said there's no audio and the screen sucks outside. also that d-pad looks pretty trashy to me. i can't say for sure until i actually hold one though.

[@hunterm.moreno4201]

HEY! For future reference, when u are soldering a micro resistor, get solder the pads first then place the resistor down and touch yours solder iron to it so u don't risk burning out the resistor. Great vid tho!

[@megatrolltrollington]

there is nothing premium about 3D printed lattice.

[@another3997]

There's nothing particularly premium about injection moulded plastic either, but that doesn't stop it being used.

[@megatrolltrollington]

injection molded abs plastic is actually fairly premium.

[@fibreglassmonkey]

@@another3997 The device was designed to be used with a plexiglass case, premium enough?

[@OhSoTiredMan]

@@megatrolltrollington Definitely quite premium, makes stuff easier in my personal experience when doing personal projects.

[@XInfinity2024]

Good video and I have to say OMG that flux trick for the ribbon cable is freaking amazing! I will have to try doing this my self when I get into soldering.

[@silvervalkiri920]

Have a pi 3 as well and make the SD card removal. Boom, you got a homemade switch hah

[@tylerberry7306]

@Snazzy Labs I am waiting on my battery. However i soldered the project together and plugged it in to test. The power module gets power but the pi doesnt. Do I have to have the battery connected for the pi to recieve power?

[@gwynndouglass3883]

"make sure your in a well ventilated room" Goes outside

[@gonzalonecchi3085]

I can't believe how I've been soldering without flux all this time... that thing is liquid magic!

[@wargodsix]

I’d prob print the case in metal and if I can I’ll just cannibalize a real controller

[@kingheroknight]

This looks like a wonderful father and kids project!

[@neodasan]

even $45 looks so expensive for this.

[@shaneintegra]

Awesome video and definitely going to be buying one of these kits. But isn't cutting the battery leads like that a "No No"?

[@tonberryhunter]

No audio? No big deal... are you kidding? Lol Im sorry but retro gaming without audio is pretty pointless.

[@frankgile1996]

This is really tempting, but are there any ways 1) to adjust the screen's brightness and 2) to add a speaker somewhere? This is awesome by the way, but if it costs as much as it does to make, it might as well have a couple more features...

[@joseherrera8489]

Why do you pronounce it like that? You're an American. We say it N-E-S.

[@HunterZ32]

Any way I can buy the whole thing from you? Lol I’m super lazy and I don’t know where my gameboys both went

[@SpookNik4]

ARRGHH FLUX FlUx fLuX fluX Fuuuuu**

[@TLil21]

How did you get Mario Kart, an N64 game to work with the pi zero? all my N64 games are laggy and don't even work with the pi zero w that I'm using.

[@hanniballecter1960]

This is basically porn... Hell yes.

[@OhSoTiredMan]

You mean mini porn

[@MarcTBG]

Don't worry about 'breathing lead bro', the boiling/vaporization point of lead is far beyond the temperature you soldering iron can go. That is flux smoking, which isn't as toxic but would still take a few years off your life, depending on what type of flux.

[@OhSoTiredMan]

Uhm... that would mean decreasing life expectancy... meaning your life expectancy is shorter then what it should be meaning you will die younger meaning you don't get to see more youtube videos

[@SH4FT4STIC]

Hi, do you have a link to the 3D printed buttons with the letters on them.

[@Movieg-u9e]

for audio you can also try connecting Bluetooth headphones I saw some Bluetooth Config option online

[@zenjen3328]

I just saw this video, and now I'm planning on making one for myself. Do you have any schematics to include a speaker? I would like to have the ability to have sound with the games (and I don't mind it being a little thicker/bigger)

[@mikhapichkhadze2885]

can you make handheld which is desktop same time so you can change sd cards and it will be desktop and when you are bored change sd card and play games?

[@Echosphere88]

Is there any non leaded solder you would recommend for this build? I'm a novice and I here the lead stuff is poisonous metal..

[@cirkuitknight]

I love my gameboy null project I got the acrylic case enclosure but I kinda like your 3d case better. Did you upload any stl files or if. You can upload or show us a link please? Thank you and nice job