SNES Jr Modding: USB-C & RGB

[@pukalo]

6:28 that's actually the spot where the RF modulator would go, but it was never populated except for Brazilian models, which only have RF and no multi out.

[@b3nner]

At around 6:37 you removed the voltage regulator (you called it mofset), then at 6:51 you mention you don’t need the regulator/mofset anymore and bridged the pads with a wire, but then at 11:04 it shows that the regulator/mofset is soldered back onto the board again? What happened there? I'd really like to do this mod, but I’m confused.

[@charlesrayshisleriii]

found this video from your printables page, just ordered the stuff to do this mod myself!

[@Accelluter]

In Brazil, Snes Jr (or know here how Snes Baby), don't have multi out, they made it with RF Port. And some technical assistance performs the appropriate adaptation service.

[@mattbunky]

i also just got the snes jr for a good price, wanna start adding usb to all of my consoles

[@DontpushtheBbutton]

could you share a playlist or the titles of the music in this video? :)

[@XipherDesign]

Yeah I can pop in the tracks I used. All are SNES tunes: Forest Moon Town - Ganbare Goemon 4 - Kirakira Douchuu Ripple Field 3 - Kirby's Dreamland 3 Flyswatter Level 2 - Mario Paint Onett Theme - Earthbound Cocoa Cave - Kirby's Super Star Monkey Song - Mario Paint Peanut Plain - Kirby's Super Star

[@DontpushtheBbutton]

@@XipherDesign much appreciated mate. also great video of course

[@marioretromods2503]

There's no MOSFET inside the SNES it's a 7805 lineal 5 Volt regulator that converts 12v to 5v . Anyway good modification looks great with the USB C 3d printed bracket

[@Boofener]

does that explain why he added it back and wired the red to it?

[@killersevenseconds]

@@Boofener Yeah this asshole changed the instillation method towards the end and did not mention it in the video.

[@viper33802]

@@Boofener Yes, with this mod you want to wire the positive wire from the usb port to the input of the voltage regulator. You can then use a 5v or 9v USB-C PD cable.

[@fatmansbellybutton]

I’m lost, does he not leave the voltage regulator out? What would be the harm in leaving it in?

[@benson733]

Thanks for this! I was trying to verify the correct way before giving this a go. I'm wondering if it would be okay to Run a capacitor along with the voltage regulator to. I've seen it done excluding the usb c mod but never with it.

[@GravediggerCaster]

Could you share a link to where you got those USB-C modules? I bought A couple the other day and apparently they’re too big for the 3-D printed piece.

[@XipherDesign]

yeah sorry about that: www.digikey.com/short/cmfjhv4z these are the style of breakouts I use

[@GravediggerCaster]

@@XipherDesign thank you so much!

[@moufbreava]

Cool mod for people who have a broken ac port

[@killersevenseconds]

What gauge of wire do you recommend for the usb-c mod?

[@XipherDesign]

Id suggest 26awg or 28awg for this mod. its thick enough for the current needed in the mod.

[@JackoMcW]

Very cool. What does the MOSFET do/why didn’t you need it anymore?

[@marioretromods2503]

It's not a MOSFET that is a 5v lineal regulator 7805 that converts (regulate ) 12v to 5v old consoles use that ic NES Sega Genesis ps1

[@LionelSanderson]

you mean regulate 7.5v up to (check data sheet) probably 35v to 5v, you want as low as possible because excess voltage dissipates as heat. 9v is usually used.

[@user-rs1990]

The 'SNES Jr' wasn't ever released in Europe or any other PAL region (not even Australia or New Zealand!) TBH. Also, you can 3D-Print your own 'region free' cart support so you can use not just USA titles but Japanese too (even the Sufami Turbo and Super Gameboy 2!) without affecting its resale value!

[@eliudgarza9219]

Where did you move the power cable to? It’s not on that second pad anymore?

[@mlance1777]

What’s your video output set up for this? I see a mclassic, what else?

[@ike-2357]

My goodness that is a absolutely stunning super fx pak pro shell, where did ya get it?

[@XipherDesign]

there was a time when they were sold on the Krikzz site: krikzz.com/our-products/cartridges/fxpak-pro.html

[@ike-2357]

@@XipherDesign thank you, unfortunately the shell color is not available anymore... I'm sad at least a little bit. I ordered a fx pak pro in red because it was the only color available, which is fine and it looks good. I'm overall very happy to have this cool flash cartridge. I'm looking to make a tiny monitor just like the one you've got for your videos. Exception being I plan on incorporating an ossc and Bluetooth audio transmitter, wii sensor bar and a power bank for use on batteries. It will resemble a portable 9inch sony pvm in shape and it will be able to run on batteries and wall power. It's gonna be sick. I'll post pictures sometime of my progress when I can, thanks for inspiring me with your own cool monitor.

[@rebornshadow3732]

Do you have a link to the usbc port you used?

[@XipherDesign]

www.digikey.com/short/cmfjhv4z yeah sorry about that. this is the type of USB-C breakout I use

[@killersevenseconds]

I started having screen issues after doing this USB C mod. While playing games I notice screen flickering.

[@Weneedaplague]

put the 7805 power regulator back in

[@LionelSanderson]

Because it's a stupid mod bypassing the linear regulator which provides clean power and then your console is absolutely dependant on the cleanliness of the switching supply you use. I had this problem with my GBS-C not liking most sources and destroying the output

[@MagnusHydra]

So what kind of power source are u using 5v with 2 amps?

[@shagof]

I have the same question, and what could happen if I connect a modded snes to a phone charger capable of 25W or more (this chargers can change to 9V, 11V, etc at different current levels to achieve 25W or more)

[@Jac7k]

Can I install the USB C mod if my console already has the LED power indicator mod installed? Looks like they both connect to the same solder points.

[@Kamnaruun]

Do you know that Usb C , adapter from the phone its not 5V . It's 5.12V or 5.20V it can be damag you SNES Jr.

[@1Raphael]

okay what about for the OG Super Nintendo is there any way to add on an HDMI port and if so maybe doing a video on that or could you point me in the right direction... any help would be greatly appreciated

[@XipherDesign]

yeah Id take a shot at that for sure if there was an HDMI kit for it. But I'm not sure there is one out yet.

[@phouleng]

Power from usb isn't 5V ..it was 5.12v or 5.30v it will destroy your jr

[@Weneedaplague]

the power in being embedded in the molded backpice is pretty common knowledge for anyone into SNES'. there's plenty of dead boards that have damaged center pieces and theres not a replacement, which explains why this video gets so much attention for being so sketchy and misinforming