Building a Custom ANTI-ROLL BAR For The BIG TURBO OBS Street Truck!

Merch Available!
teespring.com/...
Get Yo'self Some Discounts!
10% off at Snake Eater Performance!
www.snakeeater...
10% off at Circle D Specialties! Code SNIDER3000
5% off at Shitbox Supply!
shitboxsupply....
If you would like to send anything, feel free to send it to the PO Box
PO Box 218
Nashville, MI 49073
Instagram @snidertron3000

[@VATION3RD]

Put a tailgate on it without concrete in and it'll probably stop Wheeling 🤘🤘

[@SniderTron3000]

It'll stop doing wheelies and start spinning lol

[@thatrebelboy48]

Agree 100%

[@thatrebelboy48]

@@SniderTron3000 better shocks that have enough adjustment to drive the tire into the ground so you’re relying more on the suspension than currently

[@SniderTron3000]

You know, I only have 250lbs in the back of this truck. Turbo John has put 600lbs in the back of his Mustang lol

[@thatrebelboy48]

@@SniderTron3000 but he no preps, makes WAY more power, and is in a completely different chassis. Not hating at all, I’m just throwing ideas out to maybe help get Jack Black faster. I lost my dad in February of this year and he left me a single cab obs so this truck’s journey has been quite interesting to watch

[@clutchdropsnrodknock]

"I hit up the guys over at google" 🤣 Anti-rollin rollin rollin rollin

[@evanjarvi406]

Is the g body in the background I see 🤔

[@SniderTron3000]

Yeah, I gotta rewire it for a guy

[@bretjjjohnson7942]

Your joke actually did make me laugh and your welcome man. Along with the, I hit up the guy over at google. Sometimes the simplest jokes are the funniest one's. It doesn't take much to make me laugh anyways.

[@josephbeebe6873]

Can't wait to see how it works on the street or track.

[@lloydprickel825]

I need to put one on my car what's that Malibu in the back lol

[@SniderTron3000]

Its one I have to rewire for a guy

[@bnmperformancefab]

Well done bro, a little tip on material prep like that I like to use just some good ole green scotch brite to clean of steel like that so that the welds have less impurities in them. Love seeing progress on Jack Black! We gotta collaborate on something

[@SniderTron3000]

Green brite has been on my list for a while cause my old one I got really disrespectful with it and had to throw it away lol I just don't weld that often anymore so it's not on my mind

[@danieljames5875]

Once you install it take a straight edge and draw A-line all the way across that way if it begins to start twisting you can easily see it.

[@evanjarvi406]

Is the g body in the background I see 🤔

[@willievanhoesen4455]

old, jacks the ripper. sorry i had to say it. so i see your getting other things done what happened? you,walk into the shop and hit the lights and looked at the COBRA and went damn.that looks crazy fast. 2 words for ya. "WHITE LIGHTNING"

[@jamespepper2541]

I want to see, Jack Black make a quarter mile pass so bad, I don't know what to do!!! Lol 😎

[@shtboxyj8406]

Sweet. Would be cool to scale it and add preload to see how much weight it actually transfers.

[@jasonpetrich4141]

Hahahaha they turned out welded 😄😆 its fine bro No one will ever see under there

[@findoutracing6379]

What rear end are you running is that a 10 bolt ? If so what’s in it ?

[@jheibeck6059]

Those look like Teflon bushings and if they are won't need grease

[@SniderTron3000]

Yeah, I got my head out of my hind end and realized that lol

[@trentdawg2832]

Hehehehe…….he said limp bizkit….lol

[@GasCarGarage]

Jack has come a long way. Definitely needed a anti roll bar. Great work can't wait to see how it works at the track.

[@SquarebodyStuff]

THat outa help level things out. Ole Jack looked like he was a Gbody with out it.

[@lb7chrisri991]

Can’t wait to see it on the track again! And can’t wait to hear the cobras first start

[@zx10danny1]

Can’t wait to see Jack run. Also, can’t wait to see that Malibu in the background!

[@papatron-gr4wg]

What damn malibu is everyone seeing?

[@FWTrucker]

Now, you know I be loving this shit right here!

[@PHILLY214]

Box the chassis!!

[@redman715]

🤘🤘

[@garysutherland1149]

WTF is up with those welding gloves bro ? 😆

[@SniderTron3000]

Lol I'm rough on gloves 🤷‍♂️

[@THatChevyguy91]

Must be one strong 10 bolt you got there

[@SniderTron3000]

We don't talk about the rear end. If it gets attention it'll break lol

[@danieljames5875]

I would say it's probably gonna need a 1/2 inch or more of preload. That old truck is gonna put a lot of leverage on it. Time and experimenting will tell.

[@MrBReal-xc7qm]

Your on the right track with the antiroll bar. it might need to be just a little more duty in the long run. No disrespect intended. Grandma's Malibu is on it. I'm gonna email ya a pic of my set-up.

[@danieljames5875]

Boy that thing looks dinky for that big old truck but I hope it works well. Thank God for pre load lol.

[@austinlott8772]

If you continue to run into flexing issues you could always x brace the frame of the truck and it will completely eliminate the flex.

[@ctracingja4066]

Jack is coming on really good, keep up the good work..

[@sloppycscustoms2725]

🤙🏻🍕

[@tilt213]

Just one suggestion. Tillman gloves for Tig welding will help keep your fingers and hands from getting burned.

[@SniderTron3000]

Yeah, I had a set of tig gloves for a while. My buddy Dick Hamm told me he tigs bare handed so he can tell when he's putting too much heat in it.

[@tilt213]

@@SniderTron3000 that's a decent thought on it actually. I'm used to a bit of pre heating and usually trying to brace my hand on the material.

[@SniderTron3000]

@@tilt213 resting my hand on the material is how my gloves got messed up to begin with lol I wouldn't be paying attention and next thing I knew there was a big melted splotch on the pipe or whatever lol

[@tilt213]

@@SniderTron3000 ouch !

[@budddove6480]

Ladder bars now in the same spirit of making it yourself.

[@Stevesbe]

Does that keep the axles from snapping and the wheel falling out?

[@herbiederby3394]

Nice work .... anti roll bar looks right at home....🙂👍

[@bryanmoring4298]

So we’re not gonna say anything about that sweet Malibu in the background?

[@SniderTron3000]

🤫

[@bryanmoring4298]

Also noticed the mustang was gone 🤔

[@larrysix2004]

Videos just keep getting better !! Keep grinding man!

[@matthewvarnam4302]

Now it's time to see what the truck can do.

[@hitmann8420021]

All those Jack references lol. Great content

[@zacharyshaw570]

What do you have done to your rear end? Wondering if I should keep my 10 bolt for my transbrake

[@SniderTron3000]

I wouldn't advise it lol Idk how this rear end has lasted so long. Its just a mini spool and 4.10's. Still has stock axles

[@dustinclark9596]

Pay no attention to that fresh black car next door (cough cough)

[@SniderTron3000]

Oh, that ol thing? 👀

[@jeffgraham48]

Algorithm.

[@wackaho25]

Please plate that stock c channel 4000 pounds will flex that 1/8 maybe 1/4 stock bent frame rail love your content bro loving it. Also love to see you do an old z or 2jz swap they just sound awesome ✌🏻

[@wackaho25]

Couldn’t you benefit from putting one in the front too please let me know pros and cons thank you. Keep on rollin rollin rollin lolol.

[@SniderTron3000]

The front anti roll bar wouldn't help much on a drag car. It wouldn't particularly hurt it, but it doesn't do much to help with launching either. In a rwd vehicle making a pass, the front wheels are more or less just along for the ride. The rear is where its twisting because of the rotation of the drivetrain. You'll see a lot of the street/strip and daily driver type guys leave the front sway bar on just because driving it around town and around turns it'll handle a little better. But for straight line racing, the front sway bar is basically just weight up front

[@wackaho25]

Thank you for your reply ok I see the logic plus it’s like 50’pounds of weight I bet off the nose. 👍

[@davidder4516]

First

[@twiztid1fiddy]

The F-150 you have has that bar factory. Pretty cool huh?

[@SniderTron3000]

You just made me crawl under my f150 at 11:50pm in wet grass in 40* weather to check. It doesn't have it lol

[@stevenbelue5496]

@@SniderTron3000 thats good shit right there lol, i do the same shit, on my phone at nite and read something and im like "let me go check" and im usually out there with a headlamp in the AM hours hoping my neighbors dont see me and think im a crackhead.