Soft Coated GAN 11 M Pro / GuHong V4 / Kilominx / 1x1x1 Cube Unboxing!

The GAN cube's outer surface textures are pretty exciting, but I guess we'll have to wait! In the mean time, I'll be counting how many minx there is in a kilominx.
SpeedCubeShop ► speedcubeshop.com
Using the code "JPERM" supports my channel and also gives you a discount on your order.
Cube List ►
GAN 11 M Pro: speedcubeshop.com/products/ga...
(Soft version not available)
1x1 Speed Cube: speedcubeshop.com/products/1x...
DaYan GuHong V4 M: speedcubeshop.com/products/da...
X-Man Shadow V2 M 6x6: speedcubeshop.com/products/x-...
MF8 8x8: speedcubeshop.com/products/mo...
Shengshou Kilominx: speedcubeshop.com/products/sh...
Limited Edition Speed Stacks Stuff: speedcubeshop.com/products/sp...
Beginner:
2x2 Tutorial ► • Learn How to Solve a 2...
3x3 Tutorial ► • Learn How to Solve a R...
4x4 Tutorial ► • Learn How to Solve a 4...
5x5 Tutorial ► • Learn How to Solve a 5...
Special Tutorials:
3x3 One Handed ► • Rubik's Cube: How To S...
3x3 Blindfolded ► • (New) How to Solve the...
Advanced Tutorials:
2x2 ► • How to Get Fast at 2x2
3x3 ► • Beginner + CFOP Method
4x4 ► • How to Get Fast at 4x4
5x5+ ► • How to Get Fast at 5x5...
Facebook ► / jpermcubing
F2L Algs ► bit.ly/bestf2l
Patreon ► / jperm
Merch ► teespring.com/stores/jperm
Algorithm Trainer ► jperm.net
Written Tutorials ► jperm.net
Special thanks to these generous Patrons:
Erika Greggs, Omkar Sinha, Ziv Zhou, Eugene Chan, Cubing for Eternity, Melvin Mahaffey, sanjay, tim rossetti, Lv.99 Mastermind, Chris, kubesolver, Benson Giang, Dcs Banana, Asteroid, Ivan Marinkovic, Gregory Martin, Jan Strohbeck, KingParity, Antonio Bonessi, Ethan Lacasse, Will, Alex Lengacher, Shoaib, Klára Németh, Jill England, Vince Xiao, Anton Löfberg, Vihaan Krishna, Anwesh Borgohain, Mauro Caffaratto Grandes, Priyam Brahmkshatriya, Aaron Morales Dolich, Shayan Gupta, MELISSA J CLAGUE, Arav Trilokekar, Tobias, Albert Cinca, Bruhath B, Nakano Kyohei, Leszek Gawron, Chris Bonnello (Autistic Not Weird), Petrified, Benjamin Force, James Moore, Dmitri Shabes, Csaba Daday, Amay Saxena, Edan Maor, Takeshi Yanagita, Jane Qiao, Michael Mendoza, Philippe Schwartz, Derek Wong, Bob Brantner, Declan Manning, Vabio, Siddhant Sharma, Eric Soha, Michael P Deslippe, Hoang Nguyen, Stanley Wesley, Murtaza Azad, Fuzzy Sanders, Cubing Madness, Mark James, Spencer Gray, Tom Blanco, Nathan Last, John Adams, CubeRoot-Ruimin Yan, Jochen Bauer, RedKB, Fred Strauss, Danny Williams, Rick Lush, Letin, Chris Cobb, Martijn Schiedon, David Brown, Taco, Mike Sampson, Rob Peters
Music:
Buddha - Kontekst
Mikel - Relic Song
Mikel - Dark World
Ikson - Horizon
kaleido - in-between
Orca Vibes - Gypsy
Chael - Sparks
Sparks by Chaël | / chael_music
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...

[@JPerm]

Update: Toothpaste removes the mark on the timer!

[@arhyper9914]

First repliy

[@kohentassone516]

Nice

[@JJCuber27]

Lol

[@jackenmendoza6086]

Wew hahaha

[@thefatpanda4390]

lmao

[@boostman9935]

The corner cutting on that 1x1 is epic

[@tiectran4635]

Lol

[@CouchPotato-my1oj]

I got a sub 50 second man I’m so good at 1x1 man

[@DuskBS]

yeah

[@ConradBCS]

@@CouchPotato-my1oj ikr

[@coder436]

10 second record

[@spongebobsquarepants7720]

Sometimes I wonder when a MagLev 1x1 is going to be released Also lubing your 1x1 helps a lot

[@craftcrewtv8094]

I think z3cubing has one

[@PrimeRBLX]

I have the maglev one its the wrm 2021

[@BOBisSADgd]

I don’t think one will be released because there are to many pieces😫

[@Alaradi.]

​@@craftcrewtv8094 i think its the 1x1x2

[@craftcrewtv8094]

@@Alaradi. yeah true but he actually has a maglev 1x1x1, you have to search deeper to find it I don't know in which video I saw it at

[@ayalvsc]

Who else is happy when J perm is doing a unboxing video?

[@frogmanfilms1302]

I know right

[@Rezuyt]

Yeah

[@j.mckinney5512]

Yeah

[@thefatpanda4390]

Everyone who likes j perm

[@Agentxenfn]

Mee

[@thoop6795]

The 1x1 is kind slow tbh. Maybe it would be faster magnetic, but its too slow to turn either way.

[@dr.syedmuhammadmanazer-ul-414]

Add some lunar Some people have done that it goes very well

[@speeedycuber]

@@dr.syedmuhammadmanazer-ul-414 i added lunar to mine and got lube all over myhands, aybe stardust is better

[@mengbinshang2133]

if it gets faster, we probably should add the corner-to-core magnets for more stability

[@SkeletronGames]

Add maglev for speed, and then some magnets to make it more controllable

[@sylonisharma4660]

The 1x1 just sucks. He should use a Rubiks brand 1x1.

[@Machodave2020]

I think the kilominx should be a WCA event. It's like a 2×2 megaminx.

[@getbouncin5244]

This is exatly what it is

[@PakShaheenGaming8670]

是的，我希望这发生在某天

[@mariagehrels6617]

yes

[@theSyoutuber]

@@getbouncin5244 exactly and what I was going to say

[@cube8991]

@@PakShaheenGaming8670 same

[@BASTERGODOFFICIAL]

Best speedcubes of 2020. Wanted.

[@Pavanrajr2008]

we all want this as well

[@speedcubingaccount4121]

Petition

[@BASTERGODOFFICIAL]

@@speedcubingaccount4121 sure.

[@CooperTHouse]

@@speedcubingaccount4121 is there a link to the petition

[@ryanxu9983]

YEEEAHHHH

[@WR5_YT]

Little did he know that he accidentally scrambled and solved the 1 x 1 while reviewing it

[@marceltelang7825]

Incredible

[@Jniel-kj7ir]

Oh no how will he solve it

[@akhils14]

How

[@marceltelang7825]

@@akhils14 the way people scramble a 1 by 1 is turning it

[@Conorator]

@@akhils14 turn the sides until it's scrambled

[@samuelrichardson561]

6:55 "see how loud that was" 👌

[@cuboembaralhado8294]

Look how it tastes!

[@number-kv8px]

Solve a 8x8 like a 4x4 incoming, i can feel it

[@stefancioinac1635]

Yess

[@ninjaseth4357]

Then reduce to 2x2

[@CooperTHouse]

@@ninjaseth4357 then reduce the 2x2 to a 3x3 then to a 1x1😎

[@ninjaseth4357]

@@CooperTHouse dont make sense but ok

[@thoriqzulkarnain4114]

@@ninjaseth4357 because yes

[@jakobsworld1066]

I am soooooo glad you did not scramble the 1x1 it looks so hard

[@AmongUs-hv4yw]

I have the GAN 11 M pro UV, it’s rlly grippy, I used it for around 4 months and the coating hasn’t faded, it’s amazing

[@bdhdr4226]

I love the Guhong V3. Smaller size, light weight, quiet and smooth. I wish the V4 had kept the 54mm size. That's the main thing putting me off. Plenty of great 56mm 3x3s already.

[@jihyuniiful]

I was actually scared when he said he didn't know how to solve the 1x1

[@olleh1]

solving the 1x1 is impossible

[@KWCuber]

@@olleh1 how to solve 1x1= y' bam its solved

[@witherwings7772]

@@KWCuber r/whoosh

[@KWCuber]

@@witherwings7772 i was literally playing along with the joke and adding on how is that a woosh

[@kilist174]

@@KWCuberi tried it it doesn’t work

[@chimyshark]

That kilominx speed solve is incredible! I'm still struggling with my 1x1x1.

[@jordanyeet5347]

Let’s get jperm to 1 million subs

[@BeastRoverOfficial]

Admit it. We all came for the 1x1x1 cube.

[@amvymavy]

Nah fam I came here for the video

[@maiture6361]

@@amvymavy same

[@chillboard4904]

I came for the soft cube and the kilominx,

[@celestialsweat6103]

I cAmE hErE fOr ThE 2x9

[@OneDerscoreOneder]

@@amvymavy it’s a joke

[@GorggW]

I just ordered the Gan 11 M Pro from sCs, I got the black internals with frosted plastic, can't wait!

[@yang8130]

Congrats

[@aritradhabal]

I too ordered and watching this lol

[@kenjiematthewjimenez6849]

Wow Mr. J Perm you actually change your timer for how many videos you have. Keep safe and make some more awesome video. 😊😊😊🥰🥰🥰🥰

[@anjubohara9233]

I just learned how to solve my kilominx!! 😂😂😂🤣🤣

[@sawyersmith96]

Is the kilominx harder than regular cubes, im new to cubing and i can solve only 3x3, 2x2, and im working on pyriminx which ik is easy.

[@yashjain7414]

@@sawyersmith96 No actually its just a 2x2 but longer process to solve it the method is same as 2x2

[@sawyersmith96]

@@yashjain7414 oh okay

[@naiarrashid9437]

@@sawyersmith96 I would get a mega minx it’s really easy but in my opinion it’s overall a super fun cube to solve

[@duffman18]

@@sawyersmith96 it's very very slightly more difficult than a 2x2 cube. But not loads at all. The kilominx is like a 2x2 cube, and a megaminx is like a 3x3 cube. And solving them uses very similar methods to 2x2 and 3x3 cubes, just adjusted slightly for the new shape. They're really fun. Modern megaminxes turn incredibly well, they're absolutely speedcubes now. I got the new Dayan megaminx recently, it's excellent, it turns and corner cuts very well, doesn't lock up, just very nice. Check out some of the latest megaminxes. They're really good these days. They used to be very stiff and terrible

[@kennyvasquez8921]

The kilominx is the only puzzle I can solve faster jperm

[@Samuel-je9pq]

Can you please do a cube comparison end of 2020 like last year? It would be so cool and include flagships and most importantly budget cubes through all of the WCA events.

[@kingaxolotlboi3182]

Best part of his channel Watching him do turns

[@anarjack6619]

merry christmas cubers and happy new year

[@raloney3696]

8:27 “I think it’s the blue’s fault?”

[@Pavanrajr2008]

no its red's fault (getting it?)

[@joanna954]

ya i do #cubeorithms

[@lucidmlem]

blue sus

[@joanna954]

XD

[@rajajabbar9298]

@@Pavanrajr2008 yep lol

[@louisstoll9187]

Matty Hiroto Inaba calls the Soft Gan 11 the version with the „best grip“. 🤔

[@thefatpanda4390]

the guy is crazy, trust me.

[@gearbox9900]

thanks man got a new kilominx on my list

[@technitium5018]

You are my favorite youtuber ...... i hv downloded 42 videos of YOU.. bcoz i hv recently learned cube now interest in it😀

[@sainathmishra5622]

I am waiting for ur main 2021 video Excitement×100

[@DhanaLakshmi-dh9eq]

Not 100 it's infinity

[@swifttg2537]

Merry CUBEmas!

[@cuberpro21]

Can't wait to get my magnetic 1x1!!

[@nikmohdhanafi]

Like seriously the music when you solve the kilominx is really good like really

[@Pavanrajr2008]

The lusic is chael sparks

[@enigma_paradox]

Can you make a review on Dayan guhong v4 ? ❤️❤️

[@sxlami]

POV: your 1x1 is your only cube

[@submissivechunges5709]

POV: you orderd from speed cube shop and you forgot to order the 1x1

[@infiniteco1177]

POV: the top comment has 5 likes

[@tancwei7944]

POV: make a pov channel

[@Pavanrajr2008]

POV: you realize your 1x1 corner twists a lot

[@submissivechunges5709]

POV: you can't do m/ m' moves with your 1×1

[@kvl_oak]

Man I can't wait for the magnetic version release of the 1x1...

[@ZincxAU]

i was waiting for the guhong v4

[@gliese832c]

Heh, I own this exact same Kilominx and tried speedsolving it too, and got almost the same time. 2:03.31 vs. your 2:00.881.

[@hongkonger885]

KZbin being an idiot making those timestamps LoOk HoO IeS Te iDoT HeReEeEeEe

[@homeschoolcubing8539]

My best is 55.76

[@sunilnaugain1949]

Please unbox the gan k'un also.

[@_advikmishra]

What r u doing gan kun??

[@gunjanshah4844]

It was limited addition (only 999 pieces) and is solved out...

[@Pavanrajr2008]

Better version of the reply above me, so the gan K’un is only limited, there were just a 1000 cubes which got sold,out

[@gunjanshah4844]

@@Pavanrajr2008 I saw 999 piece only in cube head video 🤔🤔

[@JakeTheCake668]

You should try getting a magnetic 1x1. It has helped me bring my average down by 00.2 secs

[@user-rn5cx3dz9x]

Best channel of all in KZbin!!! I hope you will have 1.000.000. Sory for bad English, I'm Russian

[@Pavanrajr2008]

matvej i hobbi, i also agree that this is the best channel

[@NCG337]

just got here at almost 2 am i have been watching nothing but cube videos for 3 hours i don't even own a rubix cube what is my life Update: got a cube, learnt how to solve it from you, getting 2-3 minute times now and am considering ordering a speedcube. Thanks for the new hobby mate!

[@kaylazx]

Any updates? :)

[@NCG337]

@@kaylazx Actually yeah thanks for asking! Have learnt F2L and beginner PLL and OLL and am now getting 35-second-ish times consistently! haven't had a sub-30 yet but i'm working on it. I've also bought a megaminx and a 2x2, and am considering ordering a pyraminx and a 4x4 once speedcubeshop restocks their minimats. I'm so happy I gave it a go cuz I'm really enjoying it!

[@kaylazx]

@@NCG337 Nice!! You're faster than me then, I have a PB of 38.17 and an average around 45-50 :) Congrats!!

[@yashexebook]

1x1 can be used to practice color neutrality

[@Pavanrajr2008]

true facts

[@Rattus375]

I constantly have sweaty hands and the soft plastic is so much easier to grip than frosted or glossy for me

[@Exderius]

Keep up the great work

[@f1nal1ty]

I noticed that the DaYan TengYun is really quiet. And i also checked a recent Tingman Video where he said that the Dayan GuHong V3 M is really quiet as well. So i wonder, which one is the most quiet speedcube. Any recommendations? I'm looking for a really good solution for travels, where i don't want to disturb people with loud clacking noises (A video on this topic by J Perm would be really awesome)

[@jstris]

probably tengyun cause i own one and if you lube it it’ll stay quiet, if you don’t take care of it then it’ll become loud

[@thewolfdude705]

Tornado v2m is the quietest cube now :-)

[@dpstudio5342]

Dayan tengyun is the quietest cube

[@callmecooperr]

You sound like the guy I always hear in my google ads

[@p4ncke]

Happy new year 2021 to J Perm

[@Pavanrajr2008]

happy new year to you too and best wishes to vietnam

[@isaaxlol1]

I got a soft gan 11 m pro and I love it

[@piu7000]

I don't know why but I like the shadow V2 m more than the MGC. It is my main

[@altt3954]

With enough setup and break in its better, there is a comment above which says he most likely didn’t give the cube enough chances.

[@nithinthecuber268]

But shadow v2 m doesn't cornercut as like the MGC!

[@johndarylcacho6811]

@@nithinthecuber268 "Preference"

[@icebacon_]

@@nithinthecuber268 The shadow v2 at its highest potential corner cuts just as well as the mgc.

[@nithinthecuber268]

@@icebacon_ I wonder but if u see in this video it's like MGC is way more better in corner cutting compared to shadow v2 m.

[@SS____________]

I have a uv coated, I pre ordered it instantly Edit: spelling error

[@gcolombelli]

Does it really have better grip than frosted? I was kinda expecting the soft to have the best grip, hearing it's worse than frosted was a surprise. As for UV I don't really have a good reference as I have never seen UV coated plastic before.

[@ferdousishantona4982]

I just love Gan

[@aeronsuarez2631]

Happy 500k in the future

[@leonardhansson3998]

Could you please make an AoSu WRM 4X4 review????

[@ninjaseth4357]

He did in his 2020 main speed cube video

[@leonardhansson3998]

@@ninjaseth4357 ok. Thanks!!

[@autobotmsdvk5886]

Merry Christmas Jperm❤️ love from India

[@aadijsharma9597]

Me also from india Jammu and kashmir

[@karthikp2147]

From Kerala India

[@arth10]

Same

[@sahajsingh6880]

From delhi my man

[@AnunayMintoo]

From delhi!!!

[@anemidhanalaxmi7338]

Omg that 1 by 1 looks so hard

[@Ayalacubing]

nice unboxing

[@thewmikawijesinghe8737]

i love your unboxings and givaway JPERM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!😍😍

[@thewmikawijesinghe8737]

thanks

[@rexi936]

8:09 YYYYAAAAAAAAAAYYYY

[@ericthecuberspeedcuber]

The uv coated is very good

[@ethanbruce7647]

Merry Christmas

[@victorizaguirre2458]

When you think your a big kid 8:52

[@zrkhan1124]

Congratulations on getting the most complex puzzle in the world, The 1x1! I got one of those and It has been sitting on my shelf for years. Its too hard. And oh yeah! Merry Christmas!

[@Pavanrajr2008]

Happy christmas and a new year, and I also agree that the 1x1 is harder than 3x3

[@amolsoni9]

Yay another unboxing

[@rieantapnio8122]

The 3x3 soft cube thats my dream cubes

[@gunlyrics]

I know he was joking, but the statements for the 1x1 (solving), man that hurt. No hate

[@solvednscrambled5258]

Merry Christmas everyone, hope you have a great day 🎄

[@Pavanrajr2008]

Same to you also a new year

[@melissamailhot4695]

Just got eight cubes for Christmas. So yes, I am having a great day.

[@solvednscrambled5258]

@@Pavanrajr2008 Thank you

[@solvednscrambled5258]

@@melissamailhot4695 Wow that is amazing, hope you got the cubes you wanted

[@alexandrosparaponiaris588]

i am a SUB and a big fan of yours jperm

[@derjobro6442]

The soft gan 11 is after getting used to , very good. But at first .... oh Boii

[@yasararts8224]

I've been waiting for this exact moment

[@off2oof792]

J Perm having a speed cube Me haveing a cube that pops in every single me move

[@_Fuscous]

this is the worst thought out comment and the worst grammar/spelling I've seen in years

[@kingsly1031]

@@_Fuscous says with edited comment

[@_Fuscous]

@@kingsly1031 I edited out a typo. So what? I noticed it immediately after I posted the comment, and fixed it. Seems pointless to mention it.

[@ryanxu9983]

Oooo cant wait till you do ur reveal of your youcuber series v2

[@heathsorensen5019]

I love this channel

[@tanzimshahriar5444]

(Please reply) Please help me to learn auf When I recognize pll normally I can predict the auf easily but now I finished learning 2 side pll recognition and now I'm unable to predict auf, what should I do? Please help🙏

[@mistabutd1101]

Practice over and over and then you’ll eventually learn again like you used to

[@isacubes]

Practice by first recognizing pll, predicting auf, then looking at each of the two side recognitions to see how they will be affected by auf. Then mess up the last later and try to just look at two sides and use that information to predict it. I've had this problem too, and it mostly comes down to recognizing in blocks instead of colors (like for two side pll). Your brain needs to understand where the blocks are based on the two sides. It takes a while and I can't do it perfectly yet either (I average ~17).

[@JPerm]

Don't predict AUF from the initial PLL recognition. Do the correct U move so that you're seeing the case from the normal angle, then predict AUF as you start the alg. Of course, don't pause to look at the pattern, just look as you're turning.

[@jameschea.]

How many Gan 11 m Pros do you want? J Perm: *yes*

[@Pavanrajr2008]

Actually How much cubes do you wanna ship? Cameron: yes (No hate to speedcubeshop, that's a good shop I recommend to buy)

[@hasaanshah2294]

Yes i want

[@universalvideos1810]

This is what I got for Christmas. No joke.

[@universalvideos1810]

@KloudMC the Gan 11 M Pro and the 1x1

[@user-pi8vg5pr2w]

Dude you're so good at explaining stuff. Can you explain the square root of -1, (i)?

[@abdulmuqeet6632]

This man is the guy who got me into cubing… Thank you

[@kiwicuber]

Mega Miner848 dude that’s just sad

[@synergy9853]

Really sad

[@wesbob7232]

Me too

[@tareqahmmad3879]

Yes

[@tomasbernardo5972]

@Mega Miner848 how do you know genius?

[@shreyashkadam143]

J perm : Third 'gan 11 m pro' .. Me : still on 5$ mf3rs....🤣🤣🤣

[@benyahianaima7947]

Get 3 RS3M

[@lollycopter]

Yep the RS3 M 2020. I simply prefer it over my TengYun V2 M.

[@destiny7269]

get rubiks brand

[@pranavtadepalli337]

@@destiny7269 sad noises

[@cindycampbell3955]

Rubiks brand sucks

[@Sami_hasan3]

I love the magnts

[@Aragorn-B]

2:48 I got a uv coated one but I don't have much to compare it to.

[@The_Bo0b_Rowan]

No either the 8x8 is for 4x4 on a 8x8 or 8x8 into a 4x4 into a 2x2 I feel bad if he does any of these

[@AntaresSQ01]

Not particularly related to the video but I just got a Moyu RS3M for christmas as part of me coming back to cubing, I used to rock good old classics such as Moyu Aolong V1, Dayan Zhanchi V2, Gans 357, Fangshi shuangren. I generally prefer slower controllable cubes so I really liked my Shuangren and the Aolong, but the aolong was incredibly unstable and the shuangren tended to twist corners very easily even with being set up as best as i could, it was a nice cube though, I didn't particularly like the Zhanchi and the gans as they were very fast cubes with both having extremely notchy feeling, I got the gans as I heard it had insane corner cutting for the time, and it was the first cube i had that could actualyl comfortably do 45° corner cuts and 3/4 piece reverse cuts. I was too lazy to learn advanced PLL and OLL for a very long time so I still use 2 look OLL and 2 look PLL for the most part, however I'm slowly learning the algs and starting to incorporate them. And then this is where the story gets interesting. I was averaging mid 30s with average scrambles and had a PB of 26 sec with a lucky scramble, few 28s and 29s with normal scrambles. However I got the RS3M and immediately i noticed how insanely fast it was even when compared to the Zhanchi. It's insane how much cubes evolved as I thought "how could they get so much better especially since 90% of the manufacturers used very similar designs anyway". Boy was I wrong. As I said I'm by no means very fast but immediately after getting this cube, not even past break in, literally 10 solves in I got a 22.32 and since I've been averaging 29s and that 22 wasn't even particularly lucky scramble just kinda clicked. It's insane how much faster these new cubes are especially when you consider the 2020 RS3M can be had for under 10 bucks. Biggest issue with this cube is that my previous 6-7 mains that were all about equally good for my solve times just all became obsolete and are horrible to go back to... Now i have to make a new lineup starting with the Yuxin little magic M as another highly rated budget cube and potentially the Huanglong, maybe once I've confirmed that these are all good I'll splurge for one of the more high end 3x3s like the Weilong GTS3 or Gan 356X (though 60 bucks for a 3x3 is tough to swallow when u can have 4 budget cubes for that price that are already insane) It's just insane to me how forgiving the RS3M is with turns because of the magnets, yet at the same times turns smoother and faster than any cube i've had, all this while managing corner cutting at ANY angle, if you're past regular corner cuts it'll just turn into reverse corner cutting. It has made finger tricks possible that I've never tried on my cubes such as using my top of my pinky to do a B' turn. On my older cubes I was pretty much relegated to using the insides of my fingers for turns and also had to make sure I always cover the space between pieces to keep the layers in line as much as i could.

[@CubeRiser]

I recommend not buying the 356 X because it's over 2 years old and there are a lot of better cubes for cheaper prices, if you want a cube similar to the 356 X then get either the MeiLong 3M or GAN 356 M, I would recommend the MeiLong as it's stabler and cornercuts better, but make sure to get the factory magnetized version as that's better than the old one. If you want to try a lightweight cube I would suggest the DaYan GuHong V4, it's a really amazing cube, effortless to turn, good magnet strength ,overall very solid cube. The Yuxin Little Magic M is now very outdated, it'll still feel better than the ZhanChi, Gans Air etc. but not as good as the RS3M 2020 or a MeiLong 3M. Also the RS3M 2020 actually has better performance than a 356 X and GTS3M.

[@coolboyxd3]

He's postin real fast

[@celestialsweat6103]

I like to spin keychains like Jperm

[@braydencataldi6038]

A cube unboxing is never complete with out a gan 3x3

[@someonevn5701]

Solve 8x8 like a 4x4 or 2x2 or BOTH please

[@ThaoTran-dj6by]

Yes DO IT j perm

[@eavanph3009]

intro: **exist** JPerm: haha funny

[@beastmode_4049]

JPERM’S CREATOR CUBE V2 IS MY MAIN THE ONE THE ONLY RS3M!!!!

[@mistabutd1101]

7x7 tutorial soon? All other videos with the parity algs are very hard to read unlike yours

[@Pavanrajr2008]

he replied to one comment to the comment that asked the same wuestion that 'watch the how to solve a 6x6 video for now'

[@CrazyForCubes]

Looks like Gan ran out of UV rays to make the UV coated Gan 11

[@MCubes]

yup lol

[@christaras6489]

Goated*

[@fapking9033]

Nice comment

[@nathankratzer2795]

i love watching cubing videos (especially yours) because i can nerd out inn the comments and more than 1 person will understand what i'm saying lol

[@nikmohdhanafi]

Dylan I just want to say I'm soo proud of you (I'm thinking of going back to cubing after 4 months quit) if you are me my story was full for a comment section OK you know what I will get back to cubing watch out (when I start my KZbin channel) (or now)

[@nikmohdhanafi]

Too much

[@nikmohdhanafi]

OK J perm when you finished it the timer literally is 2:00:000 wth

[@nikmohdhanafi]

And anyone notice when the credit it says 1 megaminx = 1000 kilominx lol now that's funny

[@laney1378]

J Perm:I Have 200+ Cubes Me with a Singular Rubics Brand: :)👍

[@saturniunyttech679]

@Kyle Jamison sustained. You should use discount code J Perm

[@maximiliandeisz2961]

​@Kyle Jamison does anyone know where to get speedcubes in Germany? Important they need lube and MoYu RS3 M. They should either be Germany/Eu based or have cheap enough import fees that with lube, the cube, and the magnets, as well as shipping, I don't come over 26,3€(32,3$)(so I don't have to pay import tax) if they are US based and not much more for the rest because well I know that I can get them for super close to the 32 Dollar from the US. I don't know any german/Eu stores that do the trick and just buying lube from one store seems a bit stupid. paying 2-4 the price of the lube for shipping doesn't feel good

[@icebacon_]

From my experience, the shadow v2 is completely garbage out of the box. Only after extensive setting up, lubing and break in (1000 solves for me) where it surpasses the mgc. The problem is most people are so discouraged by its performance out of the box and do not give the cube enough chances for it to be that good. Here are some tips to set it up: - Completely clean the cube by TAKING IT APART COMPLETELY. Yes its necessary, the factory lube is completely garbage and you don’t want it to mix with your personal lubes. - Put the cube back together and lube it slightly with very light silicone. Traxxas 10k and stuff like lunar from SCS or angstrom lubes from TC would be desirable. - Break it in, this is the longest process in which it took me about 3-4 weeks for my shadow v2 to reach its fullest potential. It also required about 1000 solves to do so. I would highly recommend preparing lunar from SCS or Dnm-37 from TC to keep the lube setup fresh since we don’t put alot of lube in the first place. I’m not kidding when I say that this is the best 6x6, its just alot of people aren’t giving it chances. My times have dropped about 10 seconds that I now average 2:10-2:20 on 6x6 by using this cube. I encourage everyone who has the shadow v2 to do the above the give the cube some sort of chance. Its never pops, and is more stable, reliable, and only a tiny bit slower than the mgc at its maximum potential.

[@altt3954]

Yeah this is quite unfortunate but the shadow v2 is quite the tough cube to set up. Mine also required over 1k solves for it to be better than the mgc.

[@kurniawansdjie7766]

Me too, I thought I was the only one who struggled setting this cube up.

[@ecovacsindo6238]

Definitely agree, this cube is incredibly tough to setup, but its an instant main over the mgc with correct setup

[@JPerm]

Thanks for the info! I'm sure it will help a lot of people. Unfortunately, I won't be doing that many solves on 6x6 in the near future but I'll keep that in mind when making recommendations!

[@skm8838]

@@JPerm I ordered a Gan 11 M Pro and I used the best Discout code...(it’s Jperm)

[@simonsevc9113]

Happy new year j perm 🌨️🌨️🌨️🎉🎉🎉

[@Pavanrajr2008]

Ahoy! also a happy new year to you Andrey (I'm not European so I pronounce y instead)

[@sunilnaugain1949]

I am really excited for the the X Man Shadow V3

[@LolGlaceonTM]

To this day I’m still trying to figure out how to solve a 1x1

[@civilisedzombie]

I know how to make a working 1x1x1 all you have to do is cut it into 2 sets of 3 faces and as you rotate them it gets moved up on an axle, then it goes back down rotated 60*. It would only have 3 positions but it could be mixed, maybe someone else could give some other ideas to mix it in as many ways as possible

[@ericstoverink6579]

The 1x1x1 is already difficult enough as it is.

[@countryballsanimationsandm5362]

no i do QiYi O2 cube literally a 1x1 in a colored box

[@Sportainment1612]

Please make a video on how to plan cross in inspection time 😃

[@jigszante4599]

Nice video (Btw i subbed)