Solar Bottle Lamp by using TP4056 | बेकार प्लास्टिक की बोतल से बनाएं सोलर लैंप | DIY Solar Lamp

#solarbottlelamp #diysolarlamp #opengreenenergy
In this video, I will show you how to reuse waste plastic bottles to make a beautiful Solar Lamp. I have modified my original design to make the PCB simpler by using TP4056 charger module. The new PCB doesn't have any SMD components, so beginners can make it easily. I have made a custom PCB and 3D printed enclosure for this project. This project can be used for STEM education for children.
Your one-stop PCB prototype Partner PCBWay: www.pcbway.com/
Instructables link: www.instructab...
3D printable STL files: www.thingivers...
Download Gerber files: bit.ly/3rboPMX
Buy Fully Assembled PCB: bit.ly/3K9atE0
=====================================================================
Components Used:
1. TP4056 Charger Module
2. Transistor - 2N2222
3. StrawHat LED - 0.5W: amzn.to/3wDVU7y / bit.ly/3Nw4jQE
4. Resistors - 1K, 10K
5. Resistors - 5R,22R
6. Flashlight Button Switch: bit.ly/38b0vUO
7. Schottky Diode -1N5819
8. Solar panel - 60 x 60mm/ 5.5V: bit.ly/3iTB5gF / bit.ly/3tO2XZB
9. Plastic Bottle
10. 14500 Li-Ion Battery: bit.ly/36VuiAi
11. Battery Spring plates: bit.ly/3Lo5hMR
12. 24 AWG Wires: bit.ly/3qKmlFb

[@tarakantmishra]

Your DIY project always inspiring me towards innovation 💡

[@opengreenenergy]

Thank you so much ☺️

[@MaxImagination]

Excellent project! So simple yet innovative 💡

[@opengreenenergy]

Thank you 😊

[@jeremyelphick-pooley-desig4405]

I'm a UK D&T teacherr...this is a fantastic project! Really great video instructions too! I'm going to get the bits and will make my own one soon - I'm sure it'll also be a hit with the kids! Thank you for sharing!

[@opengreenenergy]

Glad you like my project. I will be very happy if it will be useful for kids learning.

[@MCsCreations]

Brilliant, dude! Fantastic work! 😃 Stay safe there with your family! 🖖😊

[@opengreenenergy]

Thank you my friend 😊

[@Edmorbus]

Excellent project

[@opengreenenergy]

Thank You

[@ronen124]

sweet

[@toolstula14]

Nice video

[@opengreenenergy]

Thank you

[@jahnuburagohain1473]

Can this 6 volt solar panel charge the battery ? Its ampere is much lower.

[@ZafarKhan-ws5bt]

Aapse purchase kar sakte ho kya aapki side

[@electronicslab_in]

How about using a single PNP transistor. Connecting emitter to positive of battery and gate to positive of solar panel through gate current limiting resistor and another high value resistance to pull down the gate of PNP. Connecting the collector to the positive leg of led load (plus series connected resistance switch network) and negative of led to ground. This way you could save one transistor. Plz correct me if i am missing someting.

[@opengreenenergy]

Thank you for your suggestion. I think it will work. Let me have a breadboard test to confirm everything is working as expected.

[@electronicslab_in]

@@opengreenenergy an additional zener can u used for exact voltage setting.

[@opengreenenergy]

Thank You

[@vanrajsindha9918]

where do you gets the components in India ?????

[@opengreenenergy]

evelta and rarecomponents

[@prafullsoni9672]

Brother your video,s is to late what is a rieson

[@opengreenenergy]

Sorry brother. Busy in a few other stuff.

[@prafullsoni9672]

@@opengreenenergy 0k 🙂🙂🙂🙂

[@noman.baloch]

Diagram Not Clearly Shown

[@opengreenenergy]

I think you are watching in low resolution. You can see the diagram on Instruactables. Link is given in video description.