Solar Hand Cart - 12V 100AH LiFePO4, Portable All in one System

[@oskosh50]

Nice set - up ! Thanks for sharing your project.

[@oldvideos1]

thank you! appreciate it :)

[@MiamiWebDesign]

That’s a pretty nice portable solar generator. I’m working on making one much like yours. BTW You have a beautiful family. Best wishes for you all.

[@oldvideos1]

thank you! glad you are building one too!

[@lawrencedavidson6195]

Nice little solar build! Your little helper is a cutie pie. Greetings from Jamaica.

[@oldvideos1]

thank you!! appreciate you watching it and the comment.

[@bahysaad74]

Great system. Well done ! I believe you need to ground the inverter to the hand truck chassis.

[@Ms.Frankenbuilder]

Good build, built one myself in a wood box. Love your helper. New sub.

[@oldvideos1]

thank you! i'll check yours out. :)

[@fbezza]

Great set up

[@TexasCanuck]

Just waiting for her to put that metal wrench across the battery terminals - - they make plastic tools (Bob the builder)

[@REVNUMANEWBERN]

Yep after watching this I believe I'd make a cover for the whole thing where it wouldn't be tempting for the little raskels

[@NerdThingsAndMore]

Good info and video thanks

[@nyoooooo]

Am I the only one who was afraid that the child would touch something that would shock him with electricity?

[@oldvideos1]

no, you're not.. but we're all good.. promise! :)

[@drew4814]

You are not alone...I am here with you...

[@chingyip371]

❤

[@markzuckerberg3128]

What does a busbar do?

[@oldvideos1]

allows you to connect multiple things to the battery, inverter, etc.

[@WRIGHTWAY5280]

A family affair.😊

[@stephensimmonds202]

got to say this your battery is way to small, moat 100 ah batteries wont supply more than 50 amps continuous, which is 600 watts , good system but 2 x 200ah batteries would realy make it worth while. i have a 135ah lfp battery with a 200w inverter and it would run a 1800w saw for a few seconds but slow to start

[@oldvideos1]

appreciate it, and agree with your numbers. i actually did have a couple 200AH 12 V batteries but sold them to upgrade to a 48V system. So this one is used for backup/easy to throw in the truck and bring places, etc.

[@Richard-ty6oz]

To whoever might be concerned, and it should be everyone. NEVER allow small children and even teens get near that solar system set-up. If that little girl holding what appears to be a Combo wrench, ever comes in contact with the terminals on the battery, the dad will be in shock for the rest of his life. I have to say, that he appears to be a very nice guy, but still, it bothers me to notice extreme danger near children !

[@oldvideos1]

thank you, noted.

[@offgridwanabe]

Hopefully that is a 150 amp BMS in that battery otherwise it may be overloaded at low voltage.

[@texasprepperprojects]

you do realize that battery is WAY too small for that inverter.

[@oldvideos1]

thanks for checking it out.. it's good for my needs and portability

[@MyChannel-vm6dw]

Can the ONE victron power supply charge a group of batteries that are in series or parallel?

[@oldvideos1]

this one can do in parallel (i had it that way with 2 of these same Chin's 12v batterys for 200AH). could also do in series at 24v, which this Victron is capable of, but I haven't configured it that way.

[@MyChannel-vm6dw]

@oldvideos1 does the victron app "see" two separate batteries and condition them separately, or when you parallel them, it treats it like one big battery?

[@oldvideos1]

@@MyChannel-vm6dw It treats them as 1. Which i think is good, because it keeps them at the same voltage and topped off together