I just started using solid edge and this is a great tutorial. I thought it was really easy to follow along. I hope you continue to make more you have a great channel.
@drmseif6 ай бұрын
Thank you so much for the feedback. I am glad you found it useful.
@leroytrio5227 Жыл бұрын
This is proving to be the best tutorial I've found. I've used full blown Acad for 23 years and was finding the transition difficult till now. Thank you.
@drmseif Жыл бұрын
Thank you so much for the feedback. I am glad that you find it interesting 😊 .
@zoukiller360tv511 ай бұрын
Thanks for the help I am just trying out Solid Edge for the first time after being in Autocad software for so many years but I was able to follow your instructions thanks again. now I need to learn where all the buttons are in Solid Edge
@drmseif11 ай бұрын
Thank you for reaching out. Please feel free to ask for any materials you need to help you. Wishing you all the success.
@dreamp331211 ай бұрын
Very detailed and understandable video. Thank you for educating us!
@drmseif11 ай бұрын
Thank you for the comment. I am glad you find it useful.
@mikesanderson5325 Жыл бұрын
Hello, I don't usually comment on youtube at all, but I wanted to thank you for sharing your guide. Your video is valuable not only because there is little material about Solid Edge, but also because it's pretty well made :) Thanks again!
@mikesanderson5325 Жыл бұрын
Could you tell me how you got 22 at 9:55 ? The only calculation i got is 17 in the center but I dont know how did you know to add 5 ? Without this information I follow your way from 1st verison of this exercise where you made extra plane but method form 2nd version is quicker.
@drmseif Жыл бұрын
Thank you so much for your kind words. I really appreciate it.
@drmseif Жыл бұрын
@@mikesanderson5325 Actually, any dimension between 17 and 27 should work. I chose 22 to be in the middle and make sure I have solid contact. This way, you do not need actual calculations and the part will be finished without any problem.
@federicomelana686910 ай бұрын
clear and efficient, very good editated video. totally perfect. thank you!
@drmseif10 ай бұрын
Thank you so much for the feedback. I am glad you find it interesting.
@Luczr2709 ай бұрын
Excellent and very clear tutorial. Thank you.
@drmseif9 ай бұрын
Thank you so much for your feedback. I am glad you find it interesting.
@innocaddesignstudio41757 ай бұрын
Sir you are very much honest while doing this
@jessysingh6687 Жыл бұрын
I like the style of your instructions. I had to replay various segments of the video just to figure out what option you clicked along the toolbar. THEN, I replayed the same segments to figure out what I did wrong. However, near the end of the video, I finish the object without the video played in the background. I will follow through your other videos. Eventually, I hope to get to a video where you edit an attribute of a finished object.
@drmseif Жыл бұрын
Thank you so much for your kind remarks. To answer your request, please watch the following video: kzbin.info/www/bejne/n3vHd55pi8t_f80
@robertqueberg4612 Жыл бұрын
I thank you sir, for the instructions along with the video lesson. I am beginning to get a grasp on what needs to be done.
@tonderaimatsungo82987 ай бұрын
Great skills there, a picked up a few tricks.
@kalinkakylab72765 ай бұрын
Thank you very much.. Excellent Tutorials
@drmseif5 ай бұрын
Thank you so much for the feedback. I am glad you found it useful.
@mustafax5165 Жыл бұрын
Your channel is awesome thanks from Turkey
@drmseif Жыл бұрын
Thank you so much for the comment. I am glad you find it interesting.
@plasticbuzzardmodelshop97157 ай бұрын
Refreshing my memory.
@drmseif7 ай бұрын
Thank you so much for the feedback.
@EliteTKDAust Жыл бұрын
Thank you for a great tutorial.
@drmseif Жыл бұрын
Thank you for your feedback. I am glad you find it interesting
@ammarkamil652610 ай бұрын
Dear Dr. Mohammed, Thanks for sharing those videos, Can you please create a video explaining the difference between SE 2022 and the new SE 2023, I used to be able to work on SE using my SW and Inventor Experience, but now I find it very difficult, I use Se to create a basic geometry to run CFD using FloEFD.
@jjca06 Жыл бұрын
nice im done ready for no. 2. thank you
@drmseif Жыл бұрын
Thank you so much for the feedback. I am glad you find it useful.
@jjca06 Жыл бұрын
@@drmseif thank you so much your video...
@nams37 Жыл бұрын
Thank you
@drmseif Жыл бұрын
You are more than welcome. Thanks.
@exoZelia10 ай бұрын
FYI - I don't know if this is a Community Edition thing or just an update since this was posted, the "Draw" area with "Line" and "Circle by Center point" is now in the "Features" tab (not home) and renamed to Sketch. Had to pause at the very first instruction cause I couldn't find it. Not the tutorials fault, either a CE thing or just the devs moving the UI around for no reason other than to make tutorials outdated
@JBCool0729 Жыл бұрын
Thanks for f..ken answer on my question.
@JBCool0729 Жыл бұрын
I have a question. Does Solid Edge has a editable cross section? What I mean that I would like to create stuff that they are inside let say a valve and I need to do some brackets and holes inside that valve. Most of the cad programs that I know can split the part in half or any other place that it will be easy to start sketching. Im new to this program but that what they want me to use.
@shahidshad-sx1pi2 ай бұрын
hi thanks for the video, can you please help me in how to print in all the 3 views, once we finish creating the diagram.
@Fumista5721 Жыл бұрын
Complimenti per i video, ho scaricato e installato solid edge da poco, e non riesco ad avere on punto di cattura sull'origine degli assi come si vede nei suoi video ha qualche consiglio da darmi? indicarmi o se devo abilitare qualche impostazione? La rigrazio.
@gagandeepsinhvaghela8600 Жыл бұрын
How to edit sketch and protrusion in solidedge like creo ??
@drmseif Жыл бұрын
This will be answered soon by showing how to edit any modeling (done using any software, and not only Solid Edge).
@Nicky-vm6zn Жыл бұрын
What do you call that object and what can it be used for ?
@drmseif Жыл бұрын
I call it intermediate shaft support. It is used when you have a long shaft that needs support to minimize its vibration or increase its overall stiffness (natural frequency).
@olivermsiska57808 ай бұрын
Hi can you help me on editing dimensions,it seem to be locked,the other thing is there are many lines when am drawing,
@drmseif7 ай бұрын
Please email the file to mohamed.seif@aamu.edu with an explanation of what is needed, and I will try to do my best to respond promptly. Or we can either Zoom or team; I am US Central time.
@Fizzy-Bubblech6 ай бұрын
R12 is missing
@ahmednessim4429 Жыл бұрын
What is the difference between solidedge and SOLIDWORKS?
@peterllewellyn819111 ай бұрын
@ahmednessim4429 The main difference is the synchronous capabilities that Dr. Seif is sharing on this channel. No other product has the ability to create or edit in this manner. (1) Modeling is face centric not sketch dependent (saved to a node for later if needed) (2) Features can be rearranged to without destroying the integrity of the model (3) IN a synchronous assembly, you can select multiple faces within several parts of that assembly and move at the same time. No need to IPA in each part. (4) Parasolid kernel will remain our core geometry engine. (5) Solid Edge can open any file directly into synchronous. To illustrate the obvious production benefits of synchronous vs. ordered (history based) Please review this video: kzbin.info/www/bejne/aZPXk6aPbJ6cgMU For more information on Synchronous: solidedge.siemens.com/en/solutions/products/3d-design/synchronous-technology/ Hope this helps,
@MSM55002 ай бұрын
@@peterllewellyn8191 "No other product has the ability to create or edit in this manner. " Really? Ansys SpaceClaim, IronCAD SpaceClaim is runs on ACIS kernel, IronCAD uses both ACIS & Parasolid.