Watch my 1-Hour free webinar if you are a beginner here >> pages.solidworkstutorials.net/comments
@fishsgame66618 Жыл бұрын
you're the awesome guy ! I have learn it will. Thank you!
@Jen-n-Tom_BugetTravellerАй бұрын
Great instructor! giving in depth instruction, we are lucky to have you. Thanks
@k4kfh2 жыл бұрын
Thank you so much for including the STEP files for older versions! My company is still using SW2021, and the official SW assembly training module only works on 2022. Glad I found yours!
@with-Aryan2 жыл бұрын
of course, I've got your back. Lots of my students in the course has the same situation so I knew I had to put the STEP for those who are working with the older version as well
@primate27442 жыл бұрын
Fantastic! I've really been wanting to learn this. Thank you!
@charlesraes85413 ай бұрын
You are the SolidWorks Goat
@with-Aryan3 ай бұрын
Thank you very kind of you
@HoffmanTactical2 жыл бұрын
Good vides man! Very helpful. Keep em' coming.
@with-Aryan2 жыл бұрын
thanks. the next episode is up today
@aadarshs9574Ай бұрын
sir i cant download the parts ,I tried several times to loggin but not working, no conformation message was been send after 15 min
@proffesorx98532 жыл бұрын
I don't have money that much but i am very very hungry to learn this course can something be done done for this
@santhoshreddy12572 жыл бұрын
Good job bro, the videos are really good
@with-Aryan2 жыл бұрын
Glad you like them!
@minimalism9505 ай бұрын
This video helped me. Thank you, Aryan. Liked n subscribed!
@with-Aryan4 ай бұрын
Glad it helped! that's why I upload them
@elRayRay2 жыл бұрын
I've watched this series and the 5-part beginner series and would like to watch the webinar you mention. Your website link in the description does not have any way to register for it or get access otherwise. Is there something I'm missing? Is the webinar still available?
@danimallover012 жыл бұрын
Yooo aryan new video!!!
@TheJrkt2 жыл бұрын
Watched the entire webinar. Got the mini-course 2.0. Cannot find the downloads. Definitely not in the Final Thoughts video. Checked the Free Downloadables table but only found the drawing sheet exercises -- nothing that looks like this video.
@with-Aryan2 жыл бұрын
Check again. I just went to check after reading your comment and I it is in front of my eyes! :)
@koenvinke3142 Жыл бұрын
@@with-Aryan I've got the same problem, it is definitly not there.
@gabrielroyer4426 Жыл бұрын
@@with-Aryan same problem and it is still not there ...
@stevecoleman4662 Жыл бұрын
Hi Aryan, Im an experienced design engineer and have used 2D autoCAD all my career. I have attempted to move across to a 3D environment on multiple occasions in the past, however there is something that i simply cannot seem to overcome. The method i use when I am designing is to work from the outside in. By this i mean i typically draw in the known constraints in the space and then develop the object(s) or parts with consideration to these known constraints. I can't seem to easily be able to apply this same strategy in the 3D solid works environment. Its straight forward in Solid works to initially develop a part in space, however this requires you to know all the information of the finished product before commencing. The way I and most good engineers design, is to create an assembly first which includes all the surrounding constraints, and then utilise these constraints to develop some of the unknowns when drawing the object. Is this possible in Solid Works? If so, is it efficient? Many thanks in advance, Steve.
@with-Aryan Жыл бұрын
Hi Steve, as an experienced design engineer, I can understand your concerns with transitioning from 2D CAD to 3D modeling. The good news is that SOLIDWORKS does provide a number of tools and workflows that can help you work from the outside in, as you described. One option to consider is creating an assembly in SOLIDWORKS that includes all of the surrounding constraints and components, and then designing your parts to fit within that assembly. This approach can help you ensure that your parts will fit and function properly in the larger system. Another option is to use SOLIDWORKS' sketching tools to create the overall shape and constraints of the part, and then use features such as extrudes, revolves, and sweeps to add detail and refine the design. You can also use SOLIDWORKS' assembly modeling tools to test fit and function of the individual components within the larger system. Additionally, SOLIDWORKS provides a variety of design tools and workflows that can help you efficiently create and refine your designs, including parametric modeling, feature recognition, and design automation. Overall, while the transition from 2D CAD to 3D modeling may require some adjustment, there are many tools and workflows available in SOLIDWORKS that can help you work from the outside in and efficiently create high-quality designs. With practice and dedication, you can master SOLIDWORKS and take advantage of its many features and capabilities.
@proffesorx98532 жыл бұрын
Can you please provide all the heavy assembly design and information that how do i get a job in big companies by using solidw...
@proffesorx98532 жыл бұрын
Please please provide next asssemble as we can not wait for it
@BSneider102 жыл бұрын
I want to see how to make the next mate, when will be video part 2
@with-Aryan2 жыл бұрын
today
@proffesorx98532 жыл бұрын
Yes please i also want to see
@jeemasjelson54633 ай бұрын
sir, i can't find the assembly mini series downloading option in the website
@with-Aryan3 ай бұрын
Did you log in?
@trojanautomotivedesign6 ай бұрын
I'm here in 2024, how can I download your camera files? That link doesn't work anymore.
@mimo.46. Жыл бұрын
Hello, i cannot find the assembly link, there is only "Where to go from here" and nothing more at the closing thoughts. Can you check it please? Thanks
@with-Aryan Жыл бұрын
I just check again, it's on the right a blue link
@volodymyr.kushnir Жыл бұрын
it seems you are using 16:10 ratio or anything else (something non-standard) and as result your video is cut off both sides
@with-Aryan Жыл бұрын
no, why?
@proffesorx98532 жыл бұрын
I am learning everywhere where i am getting free learning course ... Bug i will work hard until my last bearth
@gamingtosh6 ай бұрын
Hey Aryan! This is Ahsan form Pakistan. Your website says, "Thanks! Your login has been sent it might take up to 15 minutes for you to get it". I have waited for almost a day and I am not given with mini course.
@dionforrester83912 жыл бұрын
When using the mate type "profile center" , when clicking the main body to mate to the camera I get the error "selected entity is not valid for current mate type". Is this a problem with the download when using Solidworks 2018?
@with-Aryan2 жыл бұрын
Nope! The issue must be something else you're doing. Can't say what before I see it
@alirezafatehi51772 жыл бұрын
Good job Bro
@with-Aryan2 жыл бұрын
thanks!
@taitxuuu3128 ай бұрын
Hey dude! Viewer from Spain here. Really nice tutorial, well explained and easy to understand. I'm an engineering student and I use solid works almost daily. I would love to see a tutorial for a functional toaster, not too complicated. Anyways if you've got any tips for this purpose i'd love to hear them, thank you!
@with-Aryan8 ай бұрын
Hey, thanks! I don't know how a toaster functions. THereofre, If I'm honest, I don't think I can make a video about that any time soon. But if you have a specific question, then feel free to ask
@alberttorres57912 жыл бұрын
When I try to mate>advanced>profile center> click on flat surface of camera body then try to click on the flat surface of the lens body, it says the "selected entity cannot is not valid for mate type. Why does this happen? I am stuck on this step. Any help is appreciated! I am using solidworks 2021 and had to use the step parts.
@with-Aryan2 жыл бұрын
hard to tell without seeing it. send a screenshot of the situation to me here info@solidworkstutorials.net
@dionforrester83912 жыл бұрын
I am using Solidworks 2018 and cannot open the STEP files. Would anyone know why these will not open in Solidworks?
@with-Aryan2 жыл бұрын
you can open STEP in any verison of SW. The issue lies somewhere else and not your SW version.
@prabhjotsingh50262 жыл бұрын
may you please make a video on how to download and install Solidworks software on laptops or computers
@with-Aryan2 жыл бұрын
alright!
@chabdullah41 Жыл бұрын
Sir Firt of all i can't access your webinar .i think there is a problem... 2nd the parts are not downloading..how to download it.
@with-Aryan Жыл бұрын
Try now, I think the issue is fixed
@tallatchoudhry Жыл бұрын
There is no downloadable file there, only closing thought video is there. Please add the link of file again.
@with-Aryan Жыл бұрын
there is! I just checked again
@variousvideos5542 жыл бұрын
what the name of program you are using for editing ?
@with-Aryan2 жыл бұрын
Premiere
@gabrielroyer4426 Жыл бұрын
24:49
@aerospacefasteners1027 Жыл бұрын
please fix your video cropping
@with-Aryan Жыл бұрын
sorry, old video. Thanks for your feedback
@qiaodiyuan66712 жыл бұрын
There is no Assembly DLC files now under closing thoughts
@with-Aryan2 жыл бұрын
there is. you have to sign up then when you go in, scroll down to the bottom of the page. there are more than 5 thousand people currently there and have downloaded it
@proffesorx98532 жыл бұрын
Can you describe how hard circumstances came in your life to solve solidworks
@with-Aryan2 жыл бұрын
what do you mean
@proffesorx98532 жыл бұрын
Sir it means that what problem came when you started as a beginner in SW ... How much hour in a day ,pratice and hardwork it needs to became a professional..because as i had started my Solidw since 3 months but i am little bit confuse that what should be done ahead so that i can get more skilled for sw
@sciencetechnology9731 Жыл бұрын
Hello! Do you organise online training ???
@with-Aryan Жыл бұрын
Yes I do! you should check my course, courses.solidworkstutorials.net
@sakethsaketh750 Жыл бұрын
please update website link
@with-Aryan Жыл бұрын
courses.solidworkstutorials.net/mini-course done
@pusamus Жыл бұрын
you ramble too much. while the information is good, the 26 mins length can be reduced to 10.