SOLIDWORKS Flow Simulation: How Can CAD Integrated CFD Tool fulfill your Analysis Needs

[@rickfearn3663]

So exciting to see the potential of this software. I had no idea we could do this sort of analysis!! Thank you!

[@goengineer]

Glad it was helpful!

[@ayushkaiwart2451]

Great video! Its all theory that became practical with visualization and many features. I am going to revise the fluid dynamics and heat transfer book to get the formulas working behind.

[@dellpi3911]

kzbin.info/www/bejne/f5LRmIt3eKuKapo

[@leomanullang663]

very good. don't forget to stop by

[@bilalel-zaylaa8390]

Is it possible to probe for internal analysis? I am trying to read a pressure at a certain location but am not being able to do so

[@Maiene]

Thankyou for your teaching!

[@allenrnewbauer]

Thanks for posting!

[@goengineer]

Thank you for watching.

[@WOOTYNGFENG]

Great video! May I know if you use lid to bound the inlet & outlet ? I do not see the lid in you simulation.

[@goengineer]

The Lid feature would be used to close the geometry if it was open pipe. In this case, the affects would be the same.

[@अण्वायुवरीवर्त]

Is dynamic meshing achievable? For linear motion? Because you only mentioned rotating body simulations

[@goengineer]

SOLIDWORKS Flow Simulation does not have a mesh morphing technology but can re-mesh during the course of the solve. GoEngineer discusses the functionality here: www.goengineer.com/blog/solidworks-flow-simulation-solution-adaptive-mesh-refinement.

[@FirstLast-uz4zz]

What if you have 2 or 3 incoming and varying flow rates going to different pipes and meeting at one point? 1. A1V1 2. A2V2 3. A3V3 Is the total output flow rate (total AV) equal to = A1V1 + A2V2 + A3V3?

[@dellpi3911]

kzbin.info/www/bejne/f5LRmIt3eKuKapo

[@Zenclipsbysandu]

I am a beginner to this CFD world. I want to develop a model using cfd for the air pollution in a city. I heard that Solidworkd EFD platform is quite easy for it. Please help me with this. 😊

[@dellpi3911]

kzbin.info/www/bejne/f5LRmIt3eKuKapo.

[@ty88]

Pleased to be making the softwares sirs Do the sneedfull

[@mr.gr.2730]

is it possible tu simulate internal pressure or vacuum in a storage tank?

[@goengineer]

Hi Mr. Gr., In Flow Simulation very low pressure vacuum cannot be simulated because at low pressures gas behaves according to statistical kinematics rather than a continuum of flow. Flow Simulation must assume the flow is a gas continuum, so this a limitation of what you are trying to do with the software.

[@mr.gr.2730]

Hello, Thank you for replying. What about low internal pressures, e.g. 5 - 30 mbarg for API 650 storage tanks? For both cases I am refering to liquids (water, crude oil, etc.) as a medium.

[@goengineer]

If you use in-compressible liquids you will probably be fine because they will still act as a fluid continuum.

[@kurosakiichigo9545]

"cannot find results. please solve the project." What's probabily the thing that I havent solved yet? I've followed your video, but it does not shows every step. Thankyou in advance.

[@OnlineStudyLearn]

i want to learn CFD in solidworks please tell me how to learn in starting stages in very simple manner. i will be waiting for your reply.

[@goengineer]

We recommend starting with the free tutorials available with installation of the program. Once Flow Simulation is added in, go to Help, SOLIDWORKS Simulation, Flow Simulation Online Tutorial. Much of the useful starting material for Flow Simulation is included with the installation: Filesets for Online Tutorial: [Installation Drive]/Program Files/SOLIDWORKS Corp/SOLIDWORKS Flow Simulation/Examples. Filesets for Validation PDF: [Installation Drive]/Program Files/SOLIDWORKS Corp/SOLIDWORKS Flow Simulation/Validation Examples. Online Tutorial or Validations PDF: [Installation Drive]/Program Files/SOLIDWORKS Corp/SOLIDWORKS Flow Simulation/lang/English/Docs.

[@salahhasan1365]

Great Tutorial ! am I able to simulate two phase flow ?

[@goengineer]

Hi Salah, In the newest release, SOLIDWORKS 2018, Flow Simulation is capable of analyzing two-phase flows.

[@yasirbaig9062]

Hello Team Go Engineer, I am trying to do a simulation of an heat exchanger, in which pressure of steam falls from a value of 3.5 bar to vacuum pressure. But at the outlet, I have a condensate pump installed to only operate after the pressure their is 1.5bar. Can you suggest a proper boundary condition? Thanks

[@dellpi3911]

kzbin.info/www/bejne/f5LRmIt3eKuKapo.

[@eh_mamas8038]

I come from Indonesia, from Muhammadiyah Riau university. I am interested in casting, I am taking a final assignment in college, horizontal centrifugal casting. Can you help me with a CFD horizontal casting centrifugal tutorial? please help me 🙏🙏🙏🙏

[@dellpi3911]

kzbin.info/www/bejne/f5LRmIt3eKuKapo

[@kashvi-08]

hello sir, i have learned solidsworks, not that much detailed, to learn this simulation what other software i will learn in solidworks, like ansys or any other, pls reply, thanks

[@goengineer]

The best way to learn the software is to attend a class near you.

[@signout5033]

Hmmm??

[@bsr9155]

Go engineer is losing its authentic values.. what happened to the guys who did quality lectures..