SolidWorks Tutorial

[@nacorvega7818]

Hey guys I learn a lot with your techniques. Thank You so much!!

[@iAmEbolaWoT]

I was excited that this was going to be an actual tutorial. Needs to have a narrator.

[@EduQuestõesdeConcurso]

Muito bom video. Bem explicado !

[@Gstrangeman96]

And also yeah some simulations tutorials with this would be great

[@Bob-qm6cy]

How did you obtain the flex parameters for this model? Great job by the way!

[@armenkha6181]

Im trying this in 2019 and it is not allowing me to do the circular pattern unless the fins are merged to something. Can anyone help??

[@peterfox8701]

nice drawing right up to the blade form ,,,,props are not flat plates that are bent/twisted ,,,maybe a couple of surfaces on 2 control helical edges and then join -top and bottom control curves ? to get a more efficient shape then it a make a solid/ trim

[@trevorjfoster8171]

Correct Peter, I was going to say the same thing. The blades are of a helix profile equal to the specification, 14" dia x 24" movement per 1 revolution

[@Frank119811]

How the hell did you make the fin? I still can't figure it out, without sound it doesn't help at all.

[@fredyguevara3304]

Thank you very very kindly

[@MouffetteRadioactive]

Merci. Tuto concret, solide et bien expliqué.

[@ned2829]

not sure if you take requests but a juicer would be great

[@dayvienk7114]

Good job

[@yunwei9601]

Very good, can you demonstrate the three-dimensional modeling tutorial for the runner of the Francis turbine?

[@JuanPierreOosthuizen]

Nice job guy/girl. Would it be possible to put it in a simulation?

[@Gstrangeman96]

16:45 I can still see the bit of the first propeller blade that you left out on the inside, but then at 17:10 it's gone. Did you edit yourself correcting it out of the video, or was it somehow removed while you were adding the fillets?

[@donhaddad]

He probably edited it later but didn't include that in the video. Anyway. I don't think the excess part was removed while applying fillets. at 11:45 he sketched a circle and applied a cut extrude to remove the excess part of the first propeller blade which I believe isn't the right way to do it. A proper way of removing that part would be starting a sketch on the right plane and apply a revolve cut.

[@remotaurog]

Nice work ,a lot of steps though much easier in Fusion 360 using coil.

[@alanherrera5421]

Just took the long way, you could do al chamfers and fillets on the primary piece...

[@anticholos196]

16:44 I used the complete fillet , is less fast but it looked nicer

[@alisan-school]

❤❤❤❤Excellent ❤❤❤❤

[@vitobrabetz1146]

How would you design a fin for a surfboard? With surfaces or as a solid?

[@loupdu2841]

merci beaucoup pour ce tuto

[@kosmoscol]

Cool!

[@romlef526]

merci beaucoup, excellent

[@janpalurik]

Dobrý večer p. Babiak, Je to 7 ročný stroj a nie 2 ročný ako to píšete. a nezavádzajte iných. Je to úbohe a zbabelé. Tento stroj veľmi dobre poznám..... Pokiaľ viem problém je niekde inde.....Neklamte . Karma je zdarma.

[@llMateus]

I can not put the pieces in that brightness. What should I do?

[@zhongyisu3113]

Why I cant hear anything.

[@garbanzo_sr]

the circular pattern didn't work, error

[@SimonPeng-i7r]

Is it normal that I got no sound from this video?

[@elseksto]

Thanks a lot!

[@rizqimaskenz]

Mantepp 👌👍

[@vladimirpotanin3258]

Hello, I don't use my SOLIDWORKS program much because I have another project at the moment! If anyone has a desire I can give the program for trainings or exercises.

[@alanherrera5421]

Now I can make my turbine lol

[@homieknowme223]

share your turbine so i can be inspired to do same xd

[@alanherrera5421]

@@homieknowme223 just finishing semester, wait for it I'll do it...

[@davarj2308]

anybody knows how we can get drawing from this propeller?

[@svpetarSR]

Ha, ha! You nicely show some tools usage, but this does not have a single point for proper propeller design!

[@saulovillegasvasquez9044]

y el desarrollo de la aleta para fabricación??? and the development of the fin for manufacturing ???

[@maximilianlindner]

This is not how propellers actually work

[@M7x0.75]

This video just shows how to make a simple one for non technical purposes.

[@old_owl_De]

I don't hear vois

[@tomkehl9632]

none :(

[@John.Doe.2025]

Cult Cargo.

[@dharigra7]

Too fast movement

[@alanherrera5421]

And this is quite slow...

[@DeniMurdiyanto]

very cool visit me too

[@ВячеславЛейс]

Вот что за извращенцы рисуют эти винты,теряя минимум 50% мощности.

[@soloparadise2292]

yo this is wack my guy.

[@youtubemovies-topic9864]

Speak in English