Solidworks tutorial | sketch Quadcopter (Drone) in Solidworks

[@ChristsAthleticMusic]

part 1: spider base. 0:00 - 18:27 part 2 spider top. ? part 3 spider arm. 18:28 - 42:15 part 4 battery 42:30 - 43:46 part 5 spinner 43:59 - 45:57 part 6 spacer 46:20 - 47:10 part 7 electrical connector 47:14 - 51:40 part 8 piller 51:43 - 54:40 part 9 fan 54:42 - 1:01:56 part 10 motor 1:02:00 - 1:11:02 part 11 distribution board 1:11:06 - 1:17:45 part 12 electrical units 1:17:50 - 1:22:26 part 13 electrical units 2 1:22:31 - 1:30:53 part 14 sub assembly electrical board 1:30:57 - part 15 final assembly - 2:07:28

[@kushalyadav9821]

Please watch the video once again.

[@JabroniBoy]

For those wondering part 2 is at 14:18

[@pawanraghav5178]

Thanks for the time stamps

[@suhaibkhalid2792]

thankyou for making my life easy

[@tdog9237]

part 1: spider base. part 2 spider top. part 3 spider arm. part 4 battery part 5 spinner part 6 spacer part 7 electrical connector part 8 piller part 9 fan part 10 motor part 11 distribution board part 12 electrical units part 13 electrical units 2 part 14 sub assembly electrical board part 15 final assembly

[@graphicsinfinity1521]

how can I get the drawing dimensions please?

[@MohammedAl-Kobari]

thanks

[@zjacob60]

Took me 4 hours to do it from start to finish. Really easy to follow, the real lesson is in the many techniques and shortcuts when actually using solid works and assembly construction.

[@oisinbowens1]

I didn’t find it easy to follow at all

[@manuboker1]

Thanks! wonderful SOLIDWORKS instructing videos! 😎

[@melvinnkwain1239]

Your tutorials are very good easy to follow and help a lot to add my skills in solidworks. Thanks for your time in putting this online.

[@muralishclinton902]

Thank you. Really good tutorial. Never knew how to use solidworks before but completed the whole model.

[@humaidalvi00786]

I really appreciate the help. the steps are so easily taught that we can use it in any other projects. Thank You so much.

[@mabbyalasdan1096]

I just finished it. Truly amazing. Thank you sir for your time. Thank you so much.

[@wannabetoto]

sir, your rectangle at 50:05, is undefined. Is that a mistake? or on purpose?

[@xiaomengwu2130]

really good tutorial, help a struggling freshmore to startup building this drone. thanx!!!!!!!

[@CADCAMTUTORIALBYMAHTABALAM]

just follow the video instructions you will achieve it sure Xiaomeng Wu

[@harryarya334]

Thanks sir. this video is so easy to understand

[@TeamChickenHearts1]

This is really Amazing Lesson!! Thank you so much!!

[@heidarsafari4753]

Thank you very much for this perfect tutorial . I really enjoyed following the video and desing the drone step by step . It is a woth help to my MSc thesis . 🌹🌹🌹

[@mostafanoseur2146]

wow great doing , can`t wait for more videos

[@kritikkaushal6305]

best channel,very good

[@ahnafshariar]

Thanks mate one of the best tutorial :D

[@TeamChickenHearts1]

So beautiful and interesting, and clever! thank you.

[@Water-Melon162]

wow,i want to draw it now.thank you so much

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks i am sure you will enjoy.

[@riteshguptaself-owneddesig7685]

You are the best

[@kudachikwenya1870]

So enlightening this video really boosted my skills

[@KureElectricRoboticsAcademy]

Awesome work!

[@edwardsalasbarboza9303]

Finished!! Thanks very nice Dron :)

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks

[@NorbiGaming]

Another fantastic job! Thank you!

[@CADCAMTUTORIALBYMAHTABALAM]

thanks i hope you enjoyed.

[@oossii16]

Thanks man.I'm going to improve in the Solidworks,thanks to you.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@manishr8653]

very useful sir, nice tutorial

[@CADCAMTUTORIALBYMAHTABALAM]

Manish Reddy thanks

[@trongth5460]

yep, Thanks sir, it is precious for me, follow your tutorials

[@CADCAMTUTORIALBYMAHTABALAM]

Trọng tđh Thanks,

[@ishfaqiqram6498]

Very nice tutorial

[@kenny36060]

Guruji, you are great!

[@CADCAMTUTORIALBYMAHTABALAM]

Welcome, & all the best for the projects,

[@yellowstrideranime4613]

Hi sir, I'm doing exactly what you're doing but I don't getting the same fillet as you're having at 40:30. Can you help me?

[@chitettiabhinav7541]

In motion study i dont have a option motion analysis and when i'm animating it,the blade are rotating 6sec clockwise and 6sec anti clockwise.please help me out.Thank you.

[@CADCAMTUTORIALBYMAHTABALAM]

in Animation mode also you can give motion, you can increase 6 to infinite seconds, just drag the assembly cursor to requires seconds. & recalculate.

[@edyfernandoruizmelo181]

gracias por tu tutorial, me fue de gran ayuda...❤

[@angcongbui8508]

Thank you very much for this video. But I have questions, how can you attach the spinner and the motor? What are four holes of the spinner used for?

[@CADCAMTUTORIALBYMAHTABALAM]

Đặng Công Bùi hi, this is not accurate & complete design, still it need to many corrections,

[@angcongbui8508]

Ah I see. Still a great video though. Thank you very much

[@sharifnadaf421]

How can i get the dimensions of the parts i want to practice myself first. if anyone have that in pdf format share the link.

[@hassanqureshi5821]

Copy from the video.

[@sk.fatemaaktermohua7039]

sir, your tutorials are amazing can you give any tutorial of helicopter ?

[@CADCAMTUTORIALBYMAHTABALAM]

i will try,

[@إسراءعدنان-ش7ذ]

wow cool... that's very nice.. l'll try to draw it...💪

[@CADCAMTUTORIALBYMAHTABALAM]

thanks i hope you enjoyed.

[@إسراءعدنان-ش7ذ]

👍👍

[@chrisoliverdelacruz5347]

Thanks, I'll do this for my project...

[@CADCAMTUTORIALBYMAHTABALAM]

All the best,

[@baranbalc2888]

nice work, I used this in my project. thank you

[@ajexdcunha7250]

Good work bro keep itup

[@Ishaqkhan-gv3zy]

sir in the first step of making spider they are not going to extrude they need a fully define sketch while we dont have fully define .....sir how can i fix it?

[@ThanhNguyen-hu2tq]

VERY GOOG!!!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@ajaygujjarwadi2126]

sir my quadcopter is not running well and last day i upen then is not show all parts and assemblies parts and is only show nuts and bolts what can i do please response anyone please suggest me.

[@bashirkhan3045]

Lucid Language, simple steps..... Sir can please demonstrate a SCARA Robot

[@CADCAMTUTORIALBYMAHTABALAM]

i will try,

[@kamikazful]

I cant wait to draw it woww thx

[@lashkareharshal6291]

sir your tutorial is best but first off all you should keep the blue print of the object so that we can try first and if we have any doubt we can see this video

[@amirulfarhan8954]

For the 3rd part, at 40:38 I cant fillet. I think there are some part that you skipped, where you edit and twerk a little bit there, but it left a big impact towards my drawing as I follow your tutorial step by step :(

[@ALPHERATZ3650]

Hello I have a problem with solidworks when ensambling I can not move the parts in order to select faces. For example I was trying to apply a width restriction to a ring I could select the front face but I could not select the back face because there is not menu to do it. What keys do I have to use? thank you

[@CADCAMTUTORIALBYMAHTABALAM]

width mate you can apply only flat surfaces it will not work on circular or angular faces all the selected faces should be in one axis.

[@ALPHERATZ3650]

In assembly of ball bearing when making the mating process you selectb both inner Ring and Outer ring and applied "Width" mating, What I m trying to know is how you rotate the pieces in order to select the faces? I can not rotate and is a problem I have when trying to follow you assembly videos, I made all the pieces but if I have to rotate them I can only select one face. I try to right click menu as usual and there is not the options to make zoom or rotate and the other when skteching. Thank you so much

[@mechanicalcadandother8322]

Motion analysis is not in my solidworks ?? How can i do motion

[@rx_zone_]

Nice video sir

[@ThanhNguyen-hu2tq]

I LIKE IT!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@abdullahnasser3959]

thanks that is very nice

[@CADCAMTUTORIALBYMAHTABALAM]

thanks i hope you enjoyed.

[@ahmetusta6821]

Bravo👋👏👍

[@VBhuvaneshwar]

Hi can you please design Mistral Xherpa drone with full guiding steps?

[@srajkumar3952]

HI SIR Thanks for your videos . upload 2d sketch diagram in this videos

[@mohammedbarqawi8113]

Thank you for this interesting tutorial. Overall very good you use of features, in some parts such as the fan it wasn't accurate but it can do the job. Also , piller wasn't mated properly. but still very good work

[@CADCAMTUTORIALBYMAHTABALAM]

thanks,

[@watdafeck]

Hi, great video I am learning from them. but how do you remember the dimensions do you pre-design in Cad and then create a 3d model?

[@CADCAMTUTORIALBYMAHTABALAM]

i can't remember all dimensions, pre design & make the tutorial,

[@tonyvarghese75]

Super

[@elkardranya904]

Hello, it is a wonderful tutorial i really like it and actually i want to ask you about the choice of dimension of each piece ,Do you have a reference ? or u have them ? or calculate them ? Thanks ^^

[@resulbulu1435]

which analysis we can do for this ?

[@CADCAMTUTORIALBYMAHTABALAM]

drop test ,thermal analysis,

[@amanshaikh9106]

Thanks a lot sir....

[@abhaypatel2401]

sir, can you give tutorial of hydraulic turbine equipment like, GUIDE VANE, NOZZLE TIP, TURBINE BLADE, CASING etc....

[@mayedhassan3213]

guys which version of solid works is this

[@robbin4380]

Thank you sir..

[@Mobile-Game-Magic]

Buen Trabajo ;) eres un Crack

[@Keepcalmorgetout]

very gentle man

[@pompidouornest1806]

Very impressive design, but please can we have the full dimension on pdf. i would like to design it and see how to another one. Thanks for answering.

[@juliotitosagastegui9453]

where can i get the eng drawings?

[@ElBacán123]

good evening, I would like this project in professional INVENTOR :(

[@dmitrysmith4055]

Hi, do you have the drawings/illustrations for the drone?

[@atharvamane8776]

which software do you use for this design of drone

[@CADCAMTUTORIALBYMAHTABALAM]

Try in Solidworks,

[@esadkaraca8502]

I did it Mann!!

[@arvi9554]

Can I do the same in Solid Edge ??

[@mohamedsadokboudhraa7964]

Thanks verrrrrry much

[@romlef526]

merci beaucoup !!! quel boulot

[@CADCAMTUTORIALBYMAHTABALAM]

thanks i hope you enjoyed.

[@gursimransingh6383]

I have 2016 version .but .surface and sheet metal option is not there ......like there is a sketch option......what to do? ....please reply !!

[@rx_zone_]

Wich software...?

[@HarmoniVibe]

I want this drawing with dimensions

[@faisalmalikfaisal143]

You must share the dimensional drawing of the project as well. So we can practice on our own

[@estiakahmed804]

Thank you very much

[@CarlosAlberto-ny3ue]

hi, can i do it in solid edge?

[@Kalkigaming15]

thank you so so much

[@vikkuadvance]

How to make cylindrical Cam and set with Cam follower

[@FuxionTech]

Sir, I need this CAD model file for a project, can you please share it with us ?

[@atharvamane8776]

Sir can I do it in autocad 2007

[@CADCAMTUTORIALBYMAHTABALAM]

no, you cant give motion in solidworks,

[@atharvamane8776]

Sir please make video on how to design drone on autocad

[@CADCAMTUTORIALBYMAHTABALAM]

i have future plan for Autocad tutorials,

[@purushothampulivarthi6438]

what kind of things that I am going to learn in joining by monthly subscription

[@touficfakhreddine6017]

How many parts is this project??

[@Steve-kj9tx]

Cool tutorials, this isn't the first one from you I've watched... It's just weird that you don't fully define things... Also, there are some points that you could have 'made equal' or 'mid point' which would allow you to easily change dimensions in the future without the whole thing going haywire. Either way, good work! Thanks!

[@rafsanrahat3303]

sir ,how can i add a camera in this drone

[@CADCAMTUTORIALBYMAHTABALAM]

Soon i will make a video how to add camera on any model.

[@sanketbrahmbhatt4902]

thanks sir.. hope i can do it in CREO .

[@crickethd8078]

Sir can you provide us with the pdf having all dimensions so that we can practiced them without watching each and every step an when we get confused we will watch the video...

[@aayushmankatiyar5862]

how much specifications needed for this animation?

[@lowisl289]

Hi, Why can't I insert hex nuts? the nuts just wont come out after draging and if I click ok on the box, all my assembly file turns red. help please

[@rohitreddyamidi1399]

Bro from where do you download solid works

[@tamerrza3885]

Hi, your tutorials are amazing. Would you share your files with us.

[@mydreams299]

fantastic .. thank you.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@mohm1418]

Thank you very much for this video, but can i find the sketchs of this project.? where ... again Thanks

[@tejaj8363]

Does any know how to do analysis of this?

[@alial-ghanimi8357]

Thanks a lot.

[@CADCAMTUTORIALBYMAHTABALAM]

welcome, please share our videos which is help us to do more and more in Solidworks thanks,

[@ofirorr1]

hi, this is great, i like it very much. did you print it and added the electric system??

[@attyfernandes4280]

Olá. Em um Esboço 3D alguém sabe como fixar a ferramenta linha na direção desejada, eu sabia fazer, mas passei tempo sem usar o SOLID e acabei me esquecendo.