SolidWorks How to use Lofted Boss/Bass -Absolute Beginners

[@with-Aryan]

I have a great webinar that is free and you can watch it here bit.ly/SolidWorksCourseProForBeginners

[@dbturbonub2536]

I have watched about 3 dozen tutorials, and yours, my friend, are a cut above!!! Definitely way better the more advanced you get. Your extra detail to teach for speed and userabilty is superior. Keep em goin'!!!

[@with-Aryan]

glad you like my videos

[@dbturbonub2536]

@@with-Aryan feel free to use my comment as a testimonial too!

[@with-Aryan]

@@dbturbonub2536 would mean a lot if you could post it here www.trustpilot.com/review/solidworkstutorials.net

[@pro-techtcustompaintprojec8939]

I like it. Your way of teaching is very clear and slow enough to follow and helps point out easy mistakes that I can avoid.

[@zohrehalijanian3701]

Your teaching method is great. I like it.

[@with-Aryan]

Thank you very much Zohreh

[@asifraj321]

It's a wonderful tutorial. Can you make a video of the blockage of the curved bifurcated vessel?

[@with-Aryan]

what is that?

[@asifraj321]

Its an occluded artery

[@theexplorationhunger8440]

Struggled with lofting the guided lines but after struggling for more than an hour figured it out Alhamdullilah...phewwww!

[@with-Aryan]

good

[@radolearn]

Great tutorial. I have a SW test tomorrow and this was helpful for a quick revision, thx!

[@with-Aryan]

you are very welcome. CSWA?

[@radolearn]

@@with-Aryan Not yet, I'm only learning SW since early february. Thx for asking. If you're curious, this is my current level kzbin.info/www/bejne/o4e9iXl3h6-Doas

[@xyonblade]

Oh my goodness, there's such a huge difference in presentation between this and the video on lofts from 8 years ago.

[@with-Aryan]

Right?

[@varaprasadkadali7833]

Magnificent ...class i never seen like your way of teaching..loved a lot sir thank you soo much i wish you all the success to you...

[@with-Aryan]

dont forget to subscribe ;)

[@luzyanguezfranco4314]

This video was great! Super helpful. I get to learn a lot the more I watch your videos. Really good!!

[@with-Aryan]

glad to hear that. Checkout my c course if you are serious about learning SW

[@trondwell13]

good - to the point - nice length and well planned - you could have added different end constraints to the remaining shapes 4,5,6 etc.. A question for you - could you have added guide curves in the plan view too?

[@with-Aryan]

what do you mean?

[@apnapendlurhikigoraya7904]

thanks chacho 😍😍😍

[@with-Aryan]

You’re welcome

[@neeldhawan3943]

Can you please create a video for the “curve” feature and why would one use that instead of making that original curve?

[@edlai8745]

Thank you very much, Aryan! I really loved your tutorial and got a lot out of it!

[@with-Aryan]

You are welcome Ed! Make sure to check my course too, you're gonna love that bit.ly/SolidWorksCourseProForBeginners

[@Catsdaily005]

sir i have a question when i draw guide curve by inserting a new at throws an error showing its not intersecting with the section

[@with-Aryan]

I don't follow

[@olegegorov917]

Thank you. Very helpful!

[@with-Aryan]

you're welcome!

[@aliarab1898]

Very good, thank you so much

[@with-Aryan]

Thank you too!

[@henrikandersson1924]

You are good teacher! 👌

[@with-Aryan]

Thanks

[@navpreetkaur4646]

Amazing way of teaching! Thank you!

[@with-Aryan]

you are very welcome and thank you for your feedback. These feedback such yours were the reason I got motivated to make my course on solidworks. thank you

[@austensperry4163]

Excellent tutorial! Very useful content shared in a streamlined presentation!

[@with-Aryan]

Glad you enjoyed it!

[@tomasenrique]

This was great!

[@with-Aryan]

glad you liked it

[@jmcalales3905]

Thank You very much! I had learned so much!🤗🤗🤗

[@boomgaming9891]

keep working u really helped me thanks a lot

[@svilennikolov347]

Nice!!!

[@with-Aryan]

Thanks!

[@andresarmandofrancovillami3886]

Good job! Keep you way of teaching :)

[@samanehchoupani380]

That is the great way of teaching👍

[@santory5788]

Thank, you, please How do you copy sketch guides lines from Plane 6 to Plane 8 ?

[@with-Aryan]

which time mark?

[@santory5788]

@@with-Aryan 8::06, thx.

[@kuraigasone]

@@santory5788 look to the left side hhe did it ones and show you just playing with design tree if you want it you just pick the plane you just draw it and then pick the last point of your related sketch and create a plane after that just open new sketch on your new plane and click the sketch you want to copy and use the convert entitities on sketch tab its done

[@EROY420]

@@kuraigasone didn't get what "convert entities" function does, but it worked in this case ) Thanks!

[@noirfire]

I have a question, what can be a reason that loft does not work? My Loft doesn't look like o solid, its still transparent. T.T

[@with-Aryan]

TONS of reasons. this cannot be answered like this. Give me more details

[@AgorosoHansel]

All your tutorials are superb. However the “How to create new planes” I don’t really get it. Pls can you make an update (new) video about creating new planes.

[@with-Aryan]

Sure!

[@with-Aryan]

feel free to check my 30 minutes free webinar if you want to learn a few rare tips you won't find on KZbin ► courses.solidworkstutorials.net/Webinar-Registration

[@yussuff5749]

you have a good way of teaching

[@supahh7150]

Awesome

[@bitsurfer0101]

Does Plane 6 need to be on the outer edge of the sketches? What do you do if your profiles are offset (i.e. not exactly centered)?

[@with-Aryan]

BoostElectronics no it does not. In that case you must draw a new profile

[@couldbanyone9318]

good work, great explanations.

[@mfahad6206]

Yes i did subcribed

[@aravindhvijayanandan3010]

Woah !!! I really like your tutorials on SW. I am just a beginner but man do I like your videos. I just have one suggestion: why don't you collate all your SW videos from beginner to advanced. That way it would really be one of the best courses of SW on YT hands down. Your subs from India.

[@with-Aryan]

welcome and enjoy

[@saeidmoghaddam]

thank you,lezzat bakhshe didane amuzeshat

[@mohammedumar6779]

Nice

[@mohammedumar6779]

Can u suggest me a book or pdf to learn solidworks ?

[@with-Aryan]

I do have a 2100 page PDF tutorial to make a tiger tank in SW but it is not free Mohammed. Although I am working on a course which comes out soon if you could wait a month or two

[@samitangovindsamy3353]

Can you not use 3D sketch, which solidworks automatically creates planes, instead of creating planes and sketches on those planes? I'll give it a try and give you guys feedback ;)

[@with-Aryan]

Of course, you can use 3D sketches for guide curve specifically. But performing Loft with 3D sketches just for the sake of not making planes, is counter productive and would take you longer

[@DanielDuhon]

But how do you do the planes like that? I copied everything exactly and it didn't work

[@with-Aryan]

Hi watch it here. kzbin.info/www/bejne/jqWxmJp9l9R2eKc

[@cyrex686]

@@with-Aryan Think you could put that link in the description too? Thanks.

[@with-Aryan]

@@cyrex686 sure

[@apnapendlurhikigoraya7904]

😂😂😂 yes chacho i subscribe

[@with-Aryan]

Muchacho

[@apnapendlurhikigoraya7904]

@@with-Aryan thank you #chacho aryan ❤ i get things from you withot money 😂😂😂 sorry chacho

[@nofapporn5152]

Went to the video on how to add planes, most of the comments were about your "sexy voice" hahahahah

[@shanthakumar1634]

Keep a practise drawing on side of the screen and explain it it will be more comfortable while watching the video.... May be if the peoples need to draw the same profile they need the dimensions of the profile....

[@bitsurfer0101]

Guide curves should be called profile curves.

[@ronaldmay8594]

Example is not spelled exmaple

[@with-Aryan]

my bad

[@黎了]

你吓到我了

[@maniacalcactus4705]

Exmaple

[@with-Aryan]

Damn! Still over saw that!

[@apnapendlurhikigoraya7904]

i like 😂😂 if u dont know how to create plan 😂😂 #chacho