What's Inside? ETA Movement G10.211, G10.212 Disassemble | The movement in the swatch moonwatch

[@zockerplay3314]

Maybe not the most expensive ETA Movement (or the best one) but still a work of art from an engineering perspective!

[@SolimBD]

Thanks

[@CallOfTheWild33]

Then, this is a bad engineering 😅

[@charlesfagerquist1091]

The movement is not repairable, but watches with it are. For $65, the movement can be replaced. The hardest part is either removing the stem or opening the watch case. Te rest of the replacement is not too bad.

[@mikebruegger8654]

Put in date setting mode first then release the stem quite easily.....

[@alonsocaocristino7905]

it last me 10 years,I was expecting more for the price. I wonder if there is some other better movement I can fit on my Tissot

[@eastcoastwatchconnection7949]

Look at eta 251 series

[@gustavofischer9657]

My thoughts precisely. Just started looking for a suitable alternative to disposable quartz. A serviceable quartz such as Ronda5030.d? Or Miyoya? Or Seiko? A mechanical chronograph that fits the case of my PRC200?

[@bareenlars]

Thank you! one of the chrono dials is acting up on my Tissot and this shows me that it is not servicable, thanks for sharing!

[@GustoTheGamer]

This why I like seiko movements more ! Like the seiko flightmaster movement 7T34. It easily runs 20 years and is fixable. This ETA is not a bad movement….I like the Seiko’s more .

[@SolimBD]

Thanks for opinion

[@johnraba9322]

I would not want to keep using a 20 year old quartz movement. As technology advances so does accuracy. The fact that these movements can’t be worked on is completely irrelevant. They don’t require service, other than a battery change, because they gears are not under any significant load. The wear on any moving parts is almost nil. My G10.211 is currently running at about 6 seconds or so fast per year. It is not thermocompensated. MyG10.212 is currently running about 3 seconds a month fast. Again, this beats Seiko movements at this price point by a county mile.

[@johnraba9322]

@@GustoTheGamer I have never had a quartz movement fail in 30 years other than a change of battery. In addition, the G10.211 and .212 are more accurate than the Seiko quartz movements. Repairable or not is a non issue. I have news for you as well. Even mechanical watches often have their movements replaced rather than repaired. More and more companies drop in a fresh or already serviced movement in your watch. Then they service the removed movement and use it later for another repair.

[@johnnyfernandes2165]

How to assemble this movement again please upload a video

[@SolimBD]

not possible because this movement not use any screw

[@fuzzs8970]

Hi It satisfied my curiosity to know what's inside. Thanks. What was wrong by the way with the movement?

[@SolimBD]

Not repairable

[@fuzzs8970]

I have one which runs slow like 12 hours slow in a day. Seems to not run smooth. Makes me wonder what could do that. Though sadly not repairable

[@johnraba9322]

Much more complicated than I thought.

[@Кила-в8л]

Скажите пожалуйста. Как механизм

[@oldhogman]

DID YOU GET IT BACK TOGETHER?

[@SolimBD]

No

[@marcovinicioestradatenaz3151]

Hello, could you tell me where the 4 jewels that the lid indicates are, I can't see them.

[@watchandjewelryloft4713]

Look around the 8:40 Mark. You'll see two plates. There's a jewel on top and another on the bottom of the wheel. That's the 4 jewels.

[@holonalu]

Lovely video, but the movement is not of the horological variety. It's more of the bowel type. And Tag uses these on some 1K watches.

[@SolimBD]

Thank you

[@dredgewalker]

Yeah, it's also fitted on my formula 1 and kinda pisses me off that tag has the balls to charge 1k for a watch with a cheap movement. Still mine still works after 8 years, but I have mechs over 50 in my collection that also works.

[@israel_artz]

Parabéns pelo vídeo, muito bom.

[@SolimBD]

Thank you so much

[@markbalge3158]

Ist das Uhrwerk gestanzt?

[@rosomak8244]

Plastikguss. Die blechplatten sind mein einem Laser ausgeschnitten.

[@joseffuchse9847]

Unglaublich einfach nur Plastikschrott und das für 250€ einfach nur schlimm. Man zahlt bei der Uhr nur den Namen speedmaster .

[@tissapathiratna7761]

Looks like a Switch throw away movement.

[@siliconsugu]

Please do titan 1006 yl01 watch movement disassemble. I want to know. It's a slim movement.

[@SolimBD]

Very old model watch, Don't weary i have this watch movement, next week i will try publishing this movement Assembly and disassembly video, thanks

[@siliconsugu]

@@SolimBD thank u so much

[@АндрейШумилов-ъ3ю]

Интересно, почему они называют переводной вал, штоком?

[@bode3186]

is this yellow tears gold?

[@SolimBD]

Gold plated

[@sanecrazy12]

Wow Ronda 5000 series has this beat!! (Pun Intended) seriously though, Ronda you can repair it. I enjoy the ETA autos I have but this just makes me sad to see a Swiss company make such sub par movements as this. Great Video though!

[@syarkirardhan3939]

Klu skedar membingkar siapapun bisa yg diharapkan juga memasangnya kembali. Macam mana mengganti pasak plastik yg tlah dirusakan.

[@SolimBD]

Thanks for feedback

[@lucasmendes6516]

Were you able to put it all back in place? If so, would be interesting to see how you did it.

[@SolimBD]

I think you will get everything in the video. Please see this again. And if you don’t get then please tell me what you mean that put it all back in the place.

[@lucasmendes6516]

@@SolimBD I mean, you had to break the plastic plate holders, so I guess you used some kind of glue to assemble? And if you did, of what kind and in which points you used. Thank you for taking the time to awnser :)

[@prasetyoutomo9470]

Got problem with my Tissot, stem broken and cannot be pulled out. Do I need to disassemble the front part (right after the dial)? Thanks

[@lucasmendes6516]

@@prasetyoutomo9470 Yes, looks like.

[@romeoj387]

@@prasetyoutomo9470 Bawa ke tempat saya pak 🙏😊 Saya pernah bongkar mesin ini. Saya di malang

[@danbaig9282]

Can you tell how durable is this moment ?

[@SolimBD]

This caliber is not considered to be a repairable movement and is largely found in entry level lower priced timepieces,

[@SolimBD]

Not bad

[@danbaig9282]

@@SolimBD Can it last me 5 years ?

[@SolimBD]

Of course yes

[@danbaig9282]

@@SolimBD Thank you

[@zegarmistrz2675]

Very interesting subject matter. Good luck buddy.

[@SolimBD]

Thank you so much

[@НіжнийВуж]

Я думал будет хуже. Никакого криминала нет, можно брать.

[@romeoj387]

What was the trouble ?

[@markirvin2809]

What is the point? It cannot be re-assembled.

[@SolimBD]

There are no screws on this machine

[@markirvin2809]

@@SolimBD Exactly

[@prasetyoutomo9470]

Was wondering if it can be re assembled by putting kind of glue on those points?

[@habibsyukri6246]

it should be opened or not using a bolt

[@Antonio-ey8yd]

Non-serviceable movement in a 300-500 USD watch. It's sad.

[@SolimBD]

Right

[@Antonio-ey8yd]

@@SolimBD Anyway, thanks for the video :)

[@pecintaarloji8073]

This movement can't service?

[@SolimBD]

No

[@kmuchorowski]

Indeed, I find it scandalous. I understand I may expect such attitude in some Chinese watches, but expect more from those "Swiss made". As otherwise, what is the point to buy Swiss if similar quality may be bought at a fraction of cost from China?

[@bubuino]

Epic

[@jahangeerhamsa4671]

This is not an irreparable Moovment ?

[@SolimBD]

Not repairable movement

[@rosomak8244]

It its starting to fall apart even if you fix one part you can expect the rest to fail pretty soon. It's neither financially or technically worth the trouble to try and repair it.

[@rfreitas3298]

As far as I know, it is a expensive movement to replace... shame it is unrepairable...

[@SolimBD]

Yes, thanks for comments

[@michaelowen8055]

$50-$60 for a brand new movement. Not expensive at all.

[@rfreitas3298]

@@michaelowen8055 add the cost to replace vs the real value of an used watch vs a brand new watch... also compare this to a Miyota movement... usually those watches end up on a trash bin

[@watchandjewelryloft4713]

This is what's in the Moonswatch people are paying thousands for. 😂🤣😂🤣😂🤣😂

[@SuperKayuko]

hahaha that's right!!!! 😆

[@tim205Mi]

😂😂😂😂😂😂😂

[@Sam-pn5nh]

😅😅

[@FFG551000]

The Sunon machine in the Fake Moonswatch are better than This

[@watchandjewelryloft4713]

@@FFG551000 There's no getting through to the snobs, even when I open their watch and show them.

[@classicclass1861]

My tissot prs200 T067.417 machine uses this machine, is my tissot fake? Please answer my brother

[@SolimBD]

Original

[@classicclass1861]

@@SolimBD Thanks for the reply, I'll subcribe you, because you've helped me.

[@MarcoAAOrtiz]

Original piece of disposable plástic 😂

[@عدنانالعلي-م3م]

🌹🌹🌹

[@ruivalente1141]

swatch irony chrono mov

[@SolimBD]

Thanks for comments

[@WatchesOnWood]

part 2... reassembly 😆😆😆

[@SolimBD]

Reassemble not possible, It's a not repairable movement

[@WatchesOnWood]

@@SolimBD dont worry, I know. Just kidding.

[@geoffreyfreno7877]

Yummy plastic gears and plastic seals.. kind of a shame Omega would allow that partnership :x

[@Microwave414]

From what I'm hearing omega was relucent in doing this but when papa swatch group says you have to make a cheap omega, you make a cheap omega.

[@ToolwatchBoutique]

@@Microwave414 Well said

[@matteoleregent]

Utiliser des Brucelles en acier pour un mouvement quartz n'est pas forcément une très bonne idée... De plus, elle m'a l'air bien fatigué la pointe de cette pince

[@Arthurzeiro]

Dick move on the Swatch group's part to make an unrepairable entry level movement. It's jeweled yet can be screwed in? What a joke.

[@Jorj57]

they could've made it easily repairable, yet they choose not to. like seriously, the whole concept of Swatch being a bunch of disposable watches just doesn't sit right for me 😕 if cheap Casios can be easily repairable, then that just doesn't justify it's swiss counterpart for being hardly repairable for 2-4 times the price of a Casio

[@SolimBD]

Thanks for comments

[@amishparikh9701]

Asmbel video avilable

[@SolimBD]

no

[@siddhunkarthik]

Oh no....🙈🙈....such cheap plastic base plates and permanently fixed plastic moulds and joints. Looked like small capacitors and all are linked with thin pcb liners. It's totally an electronic junk. 🤔🤭😱. Can't imagine , so much expensive watches with lovely chronograph interfaces on dials, highly priced....huhuhuh

[@HnbnHb]

آنها لا يمكن آصلاحها ولا تستحق الشراء وبالتالي فأنها تعتبر فاشلة ومثال سيء على التقليد من الساعات .

[@djamoudjimi3358]

المحرك myotaأحسن منو بي كتير وقابل لي التصليح.عكس ETAخوردا.وغير قابل لي التصليح.حسب خبرتي من 35سنة.

[@SolimBD]

Like, Thanks for opinion

[@petremetreveli4909]

Одноразовыи механизм.фуфло. зря деньги бросать

[@SolimBD]

Thanks for feedback

[@Alex-qy9zm]

OMG! This is a modern movement... bullshit