How To Change a G-Shock GD-100 Watch Battery | Battery Replacement Tutorial | Watch Repair Channel

How To Change a G-Shock GD-100 Watch Battery | Battery Replacement Tutorial | Watch Repair Channel
Video shows how to replace a battery on a G-SHOCK Watch, process is very simple, but you need the right watch maker tools.
The battery type is CR2025 etc. You can use batteries made by Renata, Sony, Maxell, etc
--------------------------
SUBSCRIBE & HIT THE 🔔 TO RECEIVE NEW VIDEO UPDATES.
★ Subscribe us on KZbin : / solimbd
★ Like us on Facebook : / solimbd.youtube
★ Follow us on Instagram : / solimbd
---------------------------
Music Credit : MydNyte - Noir Et Blanc Vie
Music: / audiolibrary

[@savedr]

This isn't in your video, and I don't see the procedure in your comments, so here! After you change the battery, in order to start the watch going with the new battery, you have to do an AC Reset (someone called it this in the comments). That's what the sticker on the battery is talking about, "After battery replacement, contact AC with ( - ) using tweezers". So, how do you do that? Look at 3:27 when they have the gray rubber plate/shock absorber piece back in place. There is a spring sticking up through a hole in that rubber on the top right. Now, look back at 3:16, right before the rubber goes on, when they should have shown the AC reset. (Actually the jump cut at 3:17 when the position of the watch is straight afterwards is probably when they did the AC reset off camera I bet!) The AC contact is in a little well just underneath that spring, to the 'southeast' just a milimeter or two of it; you can see the copper or brass metal shining up through the hole in the black plastic above it. So that is one side of the contact; the other side is on the bottom left of the metal plate. Just above the word "CASIO" stamped into the metal, there's actually that ( - ) symbol, and just above it a little circle stamped into the metal. So, to make electrical contact between them, you can use tweezers, or I just opened up a metal paper clip, that might be easier. Stick one end of the clip into that AC contact hole so it touches the brass underneath, then touch the other end to that circle on the plate (electrically it shouldn't matter where you touch on this plate, but maybe it does, just touch inside the circle to be safe). It doesn't beep or anything, but if you flip the watch over you should see the display working now, and it should be set to 1-1-2009 (or 2007, I forget the year) and 12:00 am! Then you can set the watch from there. Remember to make sure it's on Timekeeping mode T-1 for your home time, then hold the top left button till seconds start flashing, then use bottom left button to cycle through the number you're currently setting, and the bottom right button to change that number. For the full instructions, see the 3263 Operation Guide here: support.casio.com/storage/en/manual/pdf/EN/009/pm3263.pdf .

[@dylanschaefer9799]

This comment helped me out so much. If anyone is having problems replacing the battery and wondering why it won’t work this will fix it!

[@greg.peepeeface]

This comment is better than the video, and it’s as if the person doing the video doesn’t know what they are doing

[@StrawberrySmoothiepink]

ฉันเปลี่ยนถ่านนาฬิกาที่ฉันรักได้ เพราะวีดีโอของคุณ ขอบคุณมากค่ะ Thank you

[@SolimBD]

Thanks

[@muhdnazmie-e3m]

alhamdulillah bang work.sangat bagus ya ges ya,SIUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU

[@SolimBD]

Thanks

[@amarsatrio5656]

Thanks for the video.. The difficult part for me is opening the battery. In this video it shows carefully.

[@cbeezey]

Nice camera work. I didn't take the straps off but still a good video!

[@SolimBD]

Thanks! 👍

[@jwoutdoors]

Thank you sir! You helped me fix my watch. Thanks for posting the video.

[@SolimBD]

Most welcome

[@jordanvalentino9070]

should we reset the AC (just like on the instruction sticker) or not?

[@SolimBD]

You r right @jordan valentino

[@savedr]

Yes, see my comment above! I had to reset AC to get mine working again after changing the battery, anyway. Before the reset the screen was just all dark.

[@JMK15]

This video was so helpful. Thanks for posting.

[@user-nl1sw7dc6p]

11 yrs m using this watch still running

[@LordVeroeven]

Thanks!

[@SolimBD]

Welcome!

[@xpariscutex]

Una pregunta, una vez abierto sigue resistiendo a ser sumergido?

[@igniscer1]

Parece que si, realice el mismo procedimiento para cambiar la batería y hasta ahora no le ha entrado agua al reloj al sumergirlo.

[@dr.eternity2022]

the straps were reversed Las correas fueron invertidas, excelente manera de cambiar la batería. Muchas gracias

[@НиколайКолюня-э3й]

Thank you very much!)

[@hulk1568]

U did not perform the AC reset.🧐

[@angelo5028]

Thank you

[@SolimBD]

You're welcome

[@jeep13ca]

Thanks. Couldn't figure out how to get the battery out

[@tum7777]

Thank you 💕

[@SolimBD]

Welcome

[@topgear2005]

Thank you very much!

[@SolimBD]

Most welcome

[@AbetBaLaBaTV]

Can i use cr2032 battery instead cr2025? Thanks...

[@SolimBD]

CR2025

[@Rose.Of.Hizaki]

No you cant. because CR2032 is thicker than CR2025 and wont fit. You might be able to force it in but im sure the backplate wont sit flush with the rest of the body and you risk damaging your watch if you try and force it.

[@SolimBD]

Please Visit casio website, search this watch & read full specifications

[@AbetBaLaBaTV]

@@Rose.Of.Hizaki thanks!

[@bromocorah9548]

Untuk gdf-100 type baterai nya sama ?

[@SolimBD]

Yes same battery, lithium CR2025

[@bromocorah9548]

Oke tnx om

[@bromocorah9548]

Sudah 7 tahun di pakai baru drop sekarang baterai nya hehee

[@louislucas9446]

Thank you 🙏 What but please?

[@White_devil1980]

I’ve got a G shock watch which has the same battery clasp but I can’t get the battery out from the clasp and the jeweller doesn’t have any clue how to fix it 😲😢 I’m even having trouble getting the battery out even when I have watched the video over and over again 😬😡

[@jpgarridoig]

how long did the battery last?

[@savedr]

Manual says it should be about 7 years, I wonder. I bet if you have the auto light accelerometer function turned off, and no alarms, it's longer than it would be otherwise.

[@notrealreva]

No sound after changing the battery...

[@joaomacedo638]

Trabalho péssimo,tirou os parfusos de forma errada,não tirou a ferrugem do fundo e nem limpou a caixa do relógio,nem passou silicole na guarnição 👎🏼👎🏼👎🏼

[@patrickryan1821]

I think I might have shorted my damn watch :(

[@patrickryan1821]

I actually didn't, apparently there is some delay after you touch that AC, screen was black for a while, when I looked at it again, it was on. Everything seems to be working as it should

[@jimdoyle8914]

Needs to be reset after battery change

[@НиколайКолюня-э3й]

Thank you)