Someone's gotta do it....

The time has come - This project might take awhile to finish. There is a lot of testing and design that needs to happen before we are ready - but I'm glad you've joined us for the ride. The Flo Home X5 is HERE: bit.ly/flohomeevcs HUGE thanks to Flo for sponsoring this video and helping the welding room happen at the shop. It'll be fun to see this project materialize into much cheaper wheelchairs for people who need them.
If you want to help out: www.Notawheelchair.com/donate
Get my Shirts and Razor Knife here! www.jerryrigknife.com/
Anker is named as the Official Charging Partner of JerryRigEverything: ankerfast.club/JREpartnership
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Mega Tool Kit: amzn.to/2OwequL
Plastic Pry tools: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
Replacement phone parts: www.fixez.com/?Jer...
The camera I used to film this video: amzn.to/2p7GtkX (GH6 amzn.to/3LyfW8d)
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: click.dji.com/AI2tmSb0onM9XPV...
TO SEND ME STUFF: See my P.O. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

[@SC-RGX7]

This guy is literally the definition of "fine I'll do it myself". Love you and your efforts Zac.

[@legolasfanboy6712]

That's capitalism for you!

[@scottgallagher5]

@@legolasfanboy6712 sounds like a Musk inspiration

[@The_DiploMatt]

You using your platform for good is always so inspiring.

[@GhostZero_x]

Just a small note about the welding room. Be careful of the light bounce off the light coloured walls and potentially causing arc eyes issues, since the light comes from the all sides. I think guys that weld inside of tanks or wagons can confirm. Perhaps if you find the guys having frequent issues, you can address it.

[@WeRunBrushless]

Stopped the video to come say this!

[@ChickenSDS]

@@WeRunBrushless cap

[@aquanos]

@@ChickenSDS "cap" What would that person gain from "capping" about something like that?

[@qcbtbx]

This man and his team just built a room to build a wheelchair and made it look easy, all to support his wife and others who can benefit...wow!👍🏾👍🏾

[@arkkism]

I love what you are doing for the world and people. Much love from Finland

[@ciaranosullivan3193]

Fins are always nice

[@humanperson9443]

Wow you are nice

[@TheRealMystermaN]

and he didnt even notice this..

[@tileslasher]

There is such a need for something like this. You are one of the smartest humblest people on KZbin. My grandson is completely disabled and he's reached his size on what his chair is good for. This is a real need for people. You make your wife safe and proud, and you have been inspired from your life journey. I know the vision and where it comes from. Good job buddy.

[@er1073]

Zack Cambry and all. Thank you for not allowing the insurance companies sway your ambitions by charging for your necessities for life. I am a 71 year old retired Marine and I can still get around okay however, I hope that I can get one of your products because you all care so much at Not A Wheelchair. I love you all and what you are doing. Ed in Partlow Virginia.

[@HairMetalLugia]

This is entirely why Im going to school. been using a wheelchair ffor five years now and yeah there heckin expensive. One of my personal goals after university is too find ways to make electric wheelchairs more efficient not to mention cheaper. well done man, well done

[@FirinBBs]

Dude, I love this. Years ago I reached out to you because I built a wheelchair van myself because they had upcharges north of $30k over the base price of the vehicle. This year I purchased a new wheelchair for my son cash because the insurance would approve a new one but it was going to be 6-9 months to get it and his broke. I would love to be involved in testing and brainstorming wheelchairs for youths and you are welcome to use any of the equipment I have or stuff I have already troubleshot. We have a commercial lift in our van as well as commercial style locks that mimic what is used on a school bus. I know many parents around here that would also have great feedback. You guys are awesome and I will continue to support in the ways I can.

[@visuals_live]

This is what true influence should be like. Doing things for the world to actually help the world. Always have my respect. In a world where people use their influence for themselves it’s always refreshing to see content creators like yourself that actually doing something because you actually want to solve a problem for the love.

[@kevinwells4986]

Thanks for the video. Reminded me of when we took over a company in CT, in an old warehouse, and we had to put in a large compressor for our machines. No place to put it but inside, and we did the insulation, and dry wall, and venting to the outside of the building - and it mostly worked. You were aware of the compressor running, but it was not deafening. People could put on headsets, or ear plugs, and listen to something else (except me) while working. I know that was not the focus of your video - it just brought back memories. The fact that you are doing this kind of great work is a lot more important. You have such a good heart. I've watched many of your videos now. I hope you, your wife, and family have a great holiday season.

[@dominic.h.3363]

In Hungary I'm only eligible for a rigid frame manual wheelchair every 6 years and I either have to be in education, active employment, or raising a child to be eligible... so I've been sitting in mine for 10 (11?, was eligible for one when I was in Uni). I'm glad such initiatives exist to help people in a similarly bad situation. As for me, I better start taking dating seriously after 15 years, because my chances for that are better than for employment around here...

[@NoOne-fi1dc]

Sajnos ez ilyen, remélem, hogy kibírja addig a "szekér", ameddig tudsz szerezni egy újat :)

[@longiusaescius2537]

@No One szekely?

[@NoOne-fi1dc]

@@longiusaescius2537 Magyar/Hungarian :)

[@dubi127]

dont wanna be rude, but at least you can get "A" wheelchair for around 120-150eur without going through insurance, also in Slovakia you are eligible for a new wheelchair through insurance every 5 years, no matter the other factors you stated. Thanks Orban i guess???

[@dominic.h.3363]

@@dubi127 I'm sure you mean indoor foldable wheelchairs, even second-hand. I run those to shit in 8 months, while the rigid frame chair I'm sitting in didn't require servicing in two years. Hungary gets these wheelchairs at MSRP, and there is simply no way that you can get an active, rigid frame, manual wheelchair for less than two thousand Euros from neither Ottobock, Meyra, Küschall, or any of the other manufacturers. They just cost this much, nobody is driving these prices up in Hungary after they've left the manufacturer. Orbán has nothing to do with this, both the time frame and conditions with which you are eligible to get a healthcare-funded wheelchair predate Orbán.

[@DoubleCTech]

Even through I don’t need a wheelchair and I don’t know anyone that does I just absolutely love that you are making them more affordable for people that do. You are a saint. That’s for making the world a better place.

[@hafidzgi]

I see Fireball Tool table I press like. You're doing great things for the people, there isn't that much youtubers that go the length of what you do, thank you❤️

[@FUNKISI]

You my friend are absolutely awesome there is no bounds to the lengths you will go to to help people, your amazing, also I need you as my satnav voice so bad I could listen to you talk all day....

[@johnburr9463]

I love how you are reusing the wood from the crates! I do the same thing. I even recycle wood that others leave on the side of the road for the city to haul away. There's so much waste in our society these days.

[@aronseptianto8142]

a lot of suff we make in our life will be barely seen or even barely used. While i think wanting the best for everything is human, there's a lot that can get by with good enough i felt like there's a lot of waste created just because it's not good enough when in reality people probably won't notice the difference

[@johnburr9463]

@@aronseptianto8142 I couldn't agree more.

[@sahilvats4760]

Hi Zack , I just wanted to know what happened to the Hummer that you converted to an EV ?

[@TroyM437]

Please give us an update Zach!

[@kaylons]

Probably still being worked on OR yeah

[@ericcaldwell3584]

Yes please update if you don't mind Or is it top secret classified

[@rashidkamote6301]

I just wanted to ask the same quastion...

[@kevinba7981]

It broke down , he’s fixing it

[@progamerz206]

U know you're early when the video takes time to load on a 50 mb/ps data plan

[@dirrology]

Bruh 5 gb per second? Stop the lies my friend

[@Steelhead23]

So happy for your wife to have an awesome husband like you!!!

[@Nocturnal_3233]

I love how you always explain what you're doing and how everything works. Great videos!

[@allanvanmuks1263]

I like it when someone chooses to transform the world perpetually, so rare. Keep it going bro.

[@alguienrrr]

I love how Zack just casually cloned himself at 2:27

[@TheHrb1234]

Oh I love this! Having 1 leg that only bends about 10 degrees means that even a "standard" wheelchair is impossible to use comfortably and if you get the leg rests that adjust, well they are just so heavy and only fit on the heavy kind of mass produced chairs. I hope I will be able to put my name down to be a test subject to buy one of your first chairs when you are ready!

[@sesch629]

Insanely inspirational. Never stop.

[@Jezee213]

Zach been killing it lately! I think the work you guys are doing is gonna help so many people, huge respect. Can't wait to see how the shop turns out and see one of these bad boys being put together 👍🏻

[@JustCameronAndHisJeep]

Zack and Cambry... you two are so incredible. Thank you for being so awesome. I'm telling everyone about this and just cannot give high enough praise.

[@bennionotieno]

Grateful to the whole team for being a part of this project it's really inspiring

[@Its_just_Dave.]

I love everything you’ve been doing. Not just destroying things for science, but also giving back.

[@onesujeet]

I love it how you are asking us to buy those coins to support you instead of directly asking to donate the money. This is wholesome.

[@earthling_parth]

I would've preferred the option to donate directly as I don't have a need for that coin and don't want to buy extra stuff just to support a cause.

[@DivineStride]

I'd rather donate directly. I feel like the logistics of the coins is money that could go directly to the non-profit.

[@colddesign12]

Heck yeah, everyone wants some junky trinket for their trouble - right?

[@jollun4561]

@@earthling_parth I bought 10 coins and e-mailed notawheelchair to not send them. Riley refunded the shipping cost. Quick and easy!

[@jollun4561]

@@DivineStride Yeah I asked to not have them shipped (25 dollars to Sweden). Riley said he'd refund the shipping so I bought 10. Just mail them or write a not in the order, they'll sort you out.

[@awdies]

Love it! Sounds like it's all coming together. Two quick things, one portable ventilation unit is going to be needed especially with aluminum and titanium. Nasty stuff comes off those welds. Second, get the proper welding curtains that block UV light as well. Keep up the great work! Cheers, T

[@ThePowerRanger]

Need more people like you in this world.

[@metalmad8978]

I love watching these updates and how hard you and your team work. What you're doing is inspiring! Keep it up Zach. You're awesome.

[@S666GRJ]

Inspirational as always dude 👌 love how you're helping the community.

[@major_west]

You're awesome to put so much effort into helping others.

[@RaptorX13]

Lots of respect to you for what you're trying to achieve man!!! Been your subscriber for a long time and you definitely don't fail to deliver good content and do good stuff. Hope to see the completed library soon and also the manufacturing of these wheelchairs. But also dying to know and get an update on the Electric Hummer. If my remember it correctly, I believe it was this exact same time last year when I would patiently wait for the updates on the Electric Hummer. Can we please have an update on it? Pretty please😅!!!

[@aaronrossguernsey]

They tell Zack, " 6 months for your wife to get her wheelchair ". He's like "nah hold my beer ! " Awesome job Zack!

[@AdamHillikerLikesRobots]

Really excited about this; love to see you using your power for good.

[@MrtalentedReid]

I love how you do everything on your own good 👍 skills of you Jerry

[@Samxie90]

Loved that power tool reload. It felt so badass. 😁 High-quality content as always. There's always tons of stuff to learn.

[@Virtus925]

I’ve loved watching this all unfold over the years

[@Brian-mp2mv]

Such an inspiration, good people doing good things!

[@nonmusicanto]

Я начала смотреть этого парня с видео где он ставил лифт для Кемри в ее доме и с тех пор ни одного видео не пропустила, скажу одно этот парень молодец дай Бог ему здоровья! ❤️

[@jaybhatt3515]

You are doing amazing work

[@samuraigaming9716]

Mutch to learn from your vids, respect🔥

[@lichiofishing]

🔥

[@RogueFabrication]

We absolutely love this and cannot wait to see more!

[@FirinBBs]

These kinds of collabs where hobbies turn into something much greater always impress me. I look forward to seeing more from you guys in the future!

[@darkstar2476]

What happened to the homemade electric hummer project?

[@Yashuop]

Don’t we all love a daily dose of watching JerryRigEverything?❤️

[@arnab482]

Bhai tu to sabhi video me ek hi coment copy paste karta rahta he sirf KZbins ke naam alag karke 😂

[@jamesjames7601]

Zach posted something that isn't him crying about Elon Musk and Twitter? Wow I can't believe it.

[@xs1ner]

yeah he only whines about that in Twitter

[@Nicball505]

You are so incredibly smart. I love it that you are not very good at drywall and that’s at least one thing I could teach you a lot about instead of always learning things from you.

[@____________________________.x]

7:06 notice that when the installer tries to fit the box he's disturbing the sealant he put around the cable, that's why you add blocking inside the wall first, so the cable is not flopping around and the sealant can do its job. And that earth cable, make a hook at the end so even if the screw comes loose the cable stays in place. We would sleeve it but you guys don't for some reason.

[@iammuko2879]

This is the only channel I go to straight when I open KZbin n there is new content. I don't even go straight to the ones that made me open YT in the first place. You are a legend, JRE!

[@JerryRigEverything]

Thank you!

[@shamanosarcasm9800]

Have you considered reversing the position of the wheels of the wheelchair? The larger drive/push wheels forward and the smaller swivel wheels in the rear. That would allow for better ergonomic anatomical propulsion with less strain on the shoulder girdle. Just a thought.

[@CumCum99]

I hope he sees this.

[@Waleed-mr4ed]

We should support this guy by just-not skipping the ads on his videos. It will take 20 to 30 sec but at least we can help him to generate funds for this project.

[@MommaMarmar]

I can't wait to see the wheelchairs you create. As a mother of a son in a wheelchair it means a lot that you are willing to create a more affordable wheelchair. ❤

[@happiekidonetwo2529]

Hey JerryRig. Am from Lusaka, Zambia Africa. And people here are creative, just like u but the only hard part is that nothing gets shipped here. And if he does it's very expensive. And for u I love how u take advantage of what u have .in getting everything u can think of and even making your own custom design. Please continue with what u do. U always inspire us.

[@pawlet]

I've been getting sicker and sicker. I believe that 2023 is the year that I'll need a wheelchair. Thanks for all you do to keep me moving.

[@dstockbridge1]

"We got a bender" Me: "Oh, I hope they know about rogue" "We got a welding table" Me: Oh, I hope they know about Fireball" Not only do they have youtube videos, they both have some seriously high-quality products!

[@taylorj9920]

Don't forget your ventilation provisions for exhaust - fresh air inside your fab room

[@sparkybrony3807]

One major reason that wheelchairs are so expensive is the FDA, if someone is hurt because something on it fails, you will get sued. One reason the FDA certifies medical equipment. For example, I have a continuous glucose monitor. Any changes to the *software* that goes on the phone for the monitor...it has to go through FDA certification, which can get expensive quickly. I understand the desire to build to help people, but the roadblocks in front of you are perhaps larger than you think. Best of luck on that! I, for one, think you are doing a wonderful job here.

[@aandyyyyy1]

Thank you for what you have done for your wife. you are amazing guy

[@bigguy78246]

Watching the thought behind the design of that table Jason put behind it is impressive. I look forward to watching you bring your designs and ideas into the real world.

[@ItsMeGiga]

I'm sure it's been said already but consider some thickery rubber floor matting under the compressor for additional sound insulation. If you're going to setup for air, consider rigid pipes a bit oversized, say half inch steel lines, and do your pressure regulation as close to your tool for the best airflow possible.

[@jakob_se]

That concrete nail gun is the most US-american tool ever. :D "How could be possible connect to the concrete?" - "Just shoot at it! Problem solved." Although I'm a bit concered about future cracks and spalling if you force a nail in there. A dowel and screw seams more reasonable to me.

[@Bambam-nv8re]

Someone give this man a Fonzie jacket! He is this generations definition of C😎😎L! Ayyy 👍🏻

[@ayushmahajan5368]

We need more people like you

[@myopinion69420]

if you hang some old (heavy) curtains on the walls (including across the door) inside of the air compressor room, it will help a lot with noise as it will help stop the noise bouncing off all the hard surfaces and finding its way out into the rest of the shop.

[@TheLittleBlueOwl]

Well, lets just give big round of applause to one beautiful (inside and out) lady who is inspiration (and most likely not just) for all this :) As they say behind every great man there is a great woman ... (not sure its execly to the word)

[@crowonthepowerlines]

Ramsets are so cool. I used to use a modified one when I was ski patrolling to launch evacuation ropes over the top of lift lines when we the lift was out of operation and we needed to get people off.

[@imafridi]

It's a great initiative because manual wheelchairs in the market are very expensive. I support you to make these affordable wheelchairs, it will start a new opportunity around the world to make more affordable and reliable cheap wheelchairs. can't wait to see you making a video "DIY wheelchair" or like lego where you assemble yourself and by adding more parts more functionality will be added.

[@jridges9956]

Although its not on the market yet my dad is the RnD guy for a new type of wallboard that is designed to be both fire and sound proof while not being massively heavy. In a fire it swells up from regular thickness to 3” thick to prevent transfer of heat. He has a shop in Lindon Utah where all of it is designed and tested as the company prepares to build a factory to manufacture it

[@GeppettoF17M]

I hope you get to do everything you set out to do, such an inspiration and your passion shows. Keep it up

[@brucemartini2288]

I LIKE the BLUE😊👍

[@volvo245glt]

Amazing work! But sad it's needed... Here in Sweden, the municipality are obliged to provide you with what you need to not be limited. That can be for example a wheelchair and home adaptations like ramps and wider doors with automatic openers. An electric wheelchair will cost around $50 a year to have at your disposal, but manual ones and any service or a replacement comes at no extra costs.

[@WisePaul1337]

Love all the amazing work Zac does.

[@Celm_AlexanderOfficial]

About this delivery amazon van. You can get ford Transit Electric that has more range than the rivian van. but it's your choice. keep up with the hard work.

[@chadjones2308]

You are doing amazing work as always! 🙏 Not only trying to help your wife but trying to help those that really can't afford stuff like this again you guys are doing amazing work!

[@FootCraft]

The editing is beautiful!! My favourite is at 3:07 it's just so clean‼️

[@dexterity_1st]

ME

[@danielrose1392]

The biggest pain about wheelchairs is getting spare parts. They could last 5 years, but there is always that one part wearing out you can't replace. Worked in a retirement home and when we ordered new sets of wheelchairs we always ordered spares of the parts most prone to breaking with the new chairs, because you often can't get spare parts 3 years after purchase.

[@Robert-ko6wr]

Using that 22 caliber nail set. "Got it the first time!" You crack me up pretty much every single vodeo..You look like Lex Luther but you behave like Superman plus you have these wicked one liners just to see if I'm paying attention. I am. Happy Holidays to you and your family!

[@aeonspast]

I cannot express how much I love and appreciate you being the good and the change you want to see in the world. Much respect.

[@obed.raimundo]

This is great. Y'all are gonna help so many!

[@user-bp8yg3ko1r]

I just cannot put into words on how much I love you all for making the world a better place. Thank you!

[@leggomyeggo9088]

Thanks 🙏 ❤❤❤❤❤ wonderful things you do for others happy New Years! 🎉

[@Videshideshbhakt]

I am so happy that you are doing something that USA really needs, atleast some people do. Kudos and all the best.

[@barshanpal9832]

This is soooo good, I wish to have a life like Jerry one day. Also eagerly waiting for the final video of the humvee project, man that is well overdue.

[@JRs-Garage]

You are awesome 😎 as someone partially handicapped I am super excited to what your able to accomplish!

[@SuperVincenot]

Good job !! Nice tools, nice idea. Hope everything goes well.

[@JeRKII]

You are a man of many talents. You and your family are some awesome people. Looking forward to the updates.... Too bad you didn't put in a charger that people could use in an emergency even if it was only enough charge to get them to the next charging station.

[@harrybbetteridge]

Love the "DIY" videos! i wish there were other people doing these building offices it's so satisfying

[@leifhietala8074]

For maximum sound attenuation, you'd be better served with Roxul or similar mineral fiber insulation. Better still, decouple the inside wall from the outside wall with staggered stud construction and skinny batts on both sides, or spray foam on one side to ensure all gaps are closed. Don't forget that air compressors need cooling air.

[@Kil7witch84]

This country needs more people and companies like you/r's.

[@bradhabeeb306]

I was about to ignore this channel, but after I noticed how great and professional is the content I of course loved this channel.

[@christopherlenahan3906]

That room needs a fume extractor and air intake, also I would recommend putting a timer on the compressor so it does not run outside business hours. A leak in an air line can cause the compressor to run all night and overheat potentially causing fire. Otherwise solid "dirty" booth.

[@NextGenEvs]

Awesome work!

[@crossilde]

Nice that you are always trying to make a change

[@MrCZRC]

Amazing can't wait for you to complete your manufacturing set up

[@Brahma-Astra]

it is so good to see that your society n governance encourages u guys to make things on your own ................. which helps others too 👍👍

[@Firewheels]

Sixty seconds into the video and you already have a new customer.

[@LanceT.]

Awesome. It might be worth lining the walls of that compressor room with some mass loaded vinyl. It would make a big difference on your soundproofing.

[@PatellAmar]

don't forget a drain pan / tube for the air compressor room...love the progress so far