something you should be aware of if you're considering purchasing a creality k2plus with cfs

[@BallstinkBaron]

Thats so sweet that you print her all the flexy animals!

[@botakgila7846]

sorry uncle, I just subscribed. I had an accident and my index finger and middle finger had a tendon rupture so that my two fingers couldn't be bent and were only straight. Is it possible to use a tool like the one that uncle made? Can you help me or does it have to be made? version with broken tendon. Greetings from Indonesia. I am a teacher in Indonesia who works in the interior of Papua, where medical equipment is inadequate.

[@dropbear9785]

I NEVER need to use glue stick for pla and petg on my Bambu Lab build plates if I set the plate temperature to the high end of the recommended temperature. It always sticks very well if I start with a plate that I haven't touched much and wash it well with Dawn every 5 - 10 prints. The K2 Plus will be my first Creality printer since my original CR-10S (way before modern build plates). Question: Is the K2 Plus plate decent for adhesion, or am I going to need to start dealing with glue sticks again?

[@missingpartsclub]

I've had really good luck with it as it came. I didn't use glue stick until I printed with Abs-cf. I've had that stuff stick so well that it peeled off bits of the pei. I'm using it as a sacrificial break to get it off the build platform without damaging the surface.

[@Guardian_Arias]

Definitely something to keep a note off, I wonder what the clearance tolerance is on the Bambu AMS, those have a similar issue made worse by cardboard spools that have a dent from being dropped >.>

[@missingpartsclub]

I haven't had any issues like this with the bambu ams. I'll measure the widths of the ams well tomorrow and make a quick short about it for you.

[@Guardian_Arias]

@missingpartsclub and subscribed! I no longer have access to a bambu, so I appreciate it. I sold it to get a Sovol SV08 for the bigger volume and open source nature of the machine, allowing me to run sensitive projects with peace of mind that it's not data mining.

[@ZappyOh]

Creality says that their CFS will become available at some point for the K1-series as well, with a change of extruder. I'm happy about that, as I recently got a K1Max.

[@ivansmith654]

Is it the filament or the filament spool that Creality CFS does not like? Can you respool the filament on a Creality spool would that work?

[@missingpartsclub]

That's what I've been doing, peeling the rfid stickers off the spool and respooling the filament onto the creality spools. And that works pretty okay as long as you don't spool with too much tension. It works, but it's an extra step that you have to take sometimes. As long as the spool is around 2.75 but under 2.8 it should work without issue. 2.8+ better plan on respooling.

[@Guardian_Arias]

The bambu AMS has a clearance of 2.75 inches for their spools.

[@missingpartsclub]

I've never had a spool, rewind or other bind up in my bambu.

[@Guardian_Arias]

@@missingpartsclub interesting, I measured it at 2.75, I could have gotten crossed eyed, and mixed-up lines, but maybe there is something else causing bindings. Perhaps it's the spring-loaded portions on the lid meant to keep the spool properly seated.

[@graphguy]

Happy Christmas ........... TO ME.! I will definitely buying one of these bad boys.

[@newlazer]

Not a big deal. Just print a spool winder and use old creality spools or what ever you want. Or print your own spool.

[@VagabondTE]

Husband Win

[@frank8193]

Philadelphia