How To Make Concrete Molds Manually - Building And Installing Protective Fences Around The House Thank for watching my video ! Subcribe my chanel : / @sonia7106
Пікірлер: 92
@72CrossingRS13 күн бұрын
So beautiful!
@Sonia710613 күн бұрын
thank you
@keithrepton293720 күн бұрын
I see the health and safety is working, just love the industrial flipflops.
@Sonia710620 күн бұрын
Thank you for watching the video, please like and share to support better channel development
@Rs6Quik4 күн бұрын
Standard PSE.👍
@angelisoriginals685429 күн бұрын
WaW amazingly perfect and beautiful
@Sonia710628 күн бұрын
Thank you
@AP-yd1wzАй бұрын
Nice to see how to make DIY molded concrete pieces using simple molds. But overall pretty bad build, at least based on what visible in the video. The whole fence is flimsy and would break very easily. I bet it would be possible to demolish it with just one good sledgehammer blow. Fencing posts have no steel rebar reinforcement. They just sit flush on the wall (should have been put to sit inside holes built into the wall, or enclosed into it). Only thing holding them in place at the bottom is the bit of cement placed between each post. And at the top an ultra-thin cement beam with just one steel rebar right in the middle. That's not how to build concrete structures. Might as well go for a wooden fence.
@Sonia7106Ай бұрын
Thank tou
@khongbiettao8424 жыл бұрын
Nice video
@Sonia71064 жыл бұрын
Thank you for watching my video, share my video with friends to support the channel
@rigobertoosorio751025 күн бұрын
Mucha agua compita
@Sonia710624 күн бұрын
Thank you for watching the video, please like and share to support better channel development
@TruongTruongLam-gv6ti27 күн бұрын
Nike video
@Sonia710627 күн бұрын
Thank you
@tientranthe32524 жыл бұрын
Hay tuyệt vời
@Sonia71064 жыл бұрын
Thank you for watching videos to share videos with friends to support the development channel
@abdohmohannad30434 жыл бұрын
well done ! how long is the column?
@Sonia71064 жыл бұрын
Thank you for watching my video, share my video with friends to support the channel
@richardmccann481517 күн бұрын
I would say 4 feet tall.
@tiemnguyen82044 жыл бұрын
Nice
@Sonia71064 жыл бұрын
Thank you for watching my video, share my video with friends to support the channel
@commoncentsamerican5 күн бұрын
1 major flaw, NO METAL IN THE CONCRETE!!!! Which equals alot less strength.
@Aisyah.Sabila123Ай бұрын
Yes god🎉🎉🎉🎉
@Sonia7106Ай бұрын
Thank you for watching the video, please like and share to support better channel development
@xoaaothi92134 жыл бұрын
Nice tuyệt vời
@Sonia71064 жыл бұрын
Thank you for watching videos to share videos with friends to support the development channel
@golfhacker90513 жыл бұрын
Very Clever
@Sonia71063 жыл бұрын
Thank you for watching videos or like to share videos to friends to support better development channel
@JustMe-mg6vw2 жыл бұрын
What was the mold release?
@Sonia71062 жыл бұрын
Thank you for your comments, watching good videos, please share with your friends to support the development channel
@bonfacesimiyu657Ай бұрын
Do you reonforce them?
@Sonia7106Ай бұрын
Thank you for watching the video, please like and share to support better channel development
@creativeability3 жыл бұрын
Excellent
@Sonia71063 жыл бұрын
Thank you for watching videos to share videos with friends supporting the development channel
@galgallosora2922Ай бұрын
Which liquid are they pressing on the moulds?
@Sonia7106Ай бұрын
Thank you for watching the video, please like and share to support better channel development
@villenamsАй бұрын
debe ser aceite
@scottmcdonald61675 күн бұрын
Can i buy the mold
@Sonia71065 күн бұрын
Thank you for watching the video, please like and share to support better channel development
@SuperPercyl3 жыл бұрын
where can i get this kind of pole/column making frame?
@Sonia71063 жыл бұрын
Thank you for watching videos or like to share videos to friends to support better development channel
@Sonia71063 жыл бұрын
You can create an iron cast and pour concrete
@Timbo_tango12 күн бұрын
@@Sonia7106 How strong is it with no steel inside?
@sarahnaz49073 жыл бұрын
Y spray kis cheez ka krty hy
@Sonia71063 жыл бұрын
Thank you for watching videos or like sharing videos to friends to support a better development channel
@yxhankun2 ай бұрын
how to make concrete fence from molds... your title is wrong.
@Sonia71062 ай бұрын
Thank you
@user-dq6bx1kj5u25 күн бұрын
Ilang oras Po bago tang galin sa ormahan?
@Sonia710625 күн бұрын
Thank you for watching the video, please like and share to support better channel development
@oscarsantoyo76152 ай бұрын
No veo acero ,,,no es necesario?
@Sonia71062 ай бұрын
Thank you
@Rs6Quik4 күн бұрын
Not exactly showing you the mold making process, as much as how "they" use them.
@Sonia71064 күн бұрын
Thank you for watching the video, please like and share to support better channel development
@edilbertozavala31896 күн бұрын
Toomach water on the concrete
@Sonia71065 күн бұрын
thank you
@ashleycutting19823 жыл бұрын
What are you spraying in the moulds?
@Sonia71063 жыл бұрын
Thank you for watching videos or like to share videos to friends to support better development channel
@Sonia71063 жыл бұрын
spray a layer of bro oil to protect the mold from damage
@hakunamatata7453 жыл бұрын
Wtf is bro oil ? 🛢 Google says its for beards 😆🤣
@avishnevsky73944 ай бұрын
It can be used car motor oil (cheap option). Although there are special types of oil (?) for frames
@purshotamapurshotama71683 ай бұрын
Oil
@Tankey1004 ай бұрын
Why do south east asians like to wear slippers in construction site next to heavy machinery and sharp objects. Answer: ???, eg hate to have too many toes, others 3:58
@Sonia71064 ай бұрын
Thank you
@isaganirabara1877Ай бұрын
mixing is inconsistent
@Sonia7106Ай бұрын
Thank you
@ironworkerfxr710515 сағат бұрын
All that work for poor concrete,,sump test FAIL....way way too much water...
@maximpimenov3848Ай бұрын
такая туфта... без арматуры, жидкий раствор - чз пять лет посыпится в труху?
@Sonia7106Ай бұрын
Thank you
@icculus79892 ай бұрын
There was no.pint in this video where you learn to make a mold
@Sonia71062 ай бұрын
Thank you
@TienNguyen-kh2go4 жыл бұрын
Nice video
@Sonia71064 жыл бұрын
Thank you for watching my video, share my video with friends to support the channel
@quynhkutequynhkute34514 жыл бұрын
Nice
@Sonia71064 жыл бұрын
Thank you for watching my video, share my video with friends to support the channel
@quangpham-sn1pz3 жыл бұрын
Nice video
@Sonia71063 жыл бұрын
Thank you for watching my video, share my video with friends to support the channel
@manh13153 жыл бұрын
Nice video
@Sonia71063 жыл бұрын
Thank you for watching my video, share my video with friends to support the channel
@_NguyensythiemDTDHHTD3 жыл бұрын
Nice video
@Sonia71063 жыл бұрын
Thank you for watching videos or like to share videos to friends to support better development channel
@jinsejoon4204 жыл бұрын
Nice video
@Sonia71064 жыл бұрын
Thank you for watching videos to share videos with friends to support the development channel
@xoaaothi28854 жыл бұрын
Nice video
@Sonia71064 жыл бұрын
Thank you for watching videos to share videos with friends to support the development channel