Sonic Pad on Ender 5 S1

This was a quick & easy way to speed up your Ender 5 S1 or other printer with Klipper. I have also designed a nice mount for this setup to be everything nice and clean.
Check out The feral engineer for my helpful info - / @theferalengineer
Creality Ender-5 S1 (From Creality) - bit.ly/Crealit...
Creality Ender-5 S1 (From Amazon) - amzn.to/3FwHVUI
Creality Sonic Pad (From Amazon) - amzn.to/3YZUYoy
Creality Sonic Pad (From Creality) - bit.ly/Crealit...
Use code 5S80 to save about $80 on the Ender-5 S1 Speed Combo
Ender-5 S1 3D Printer Speed Combo(From Creality) - bit.ly/Ender-5...
Enclosure Options:
Acrylic Enclosure for Ender-5 S1 bit.ly/Ender-5...
Soft Tent Enclosure - amzn.to/3GMXwkj
Other 3D Printer Enclosure - bit.ly/Crealit...
Sonic Pad Mount For Ender 5 S1:
Ender 5 S1 Sonic Pad Mount 3D Files - bit.ly/Ender-5...
Hardware:
4 x M5x35mm amzn.to/3ZdikHL
6 x M3x12mm amzn.to/3Tq27NS
2 x M3 Brass Inserts 4mm x 5mm amzn.to/3Jpicil
If you doing to be building other things I suggest getting some hardware kits. They are a better bang for the buck. Here are some links to stuff that I used.
M3 Stainless Steel Hex Socket Head Kit - amzn.to/3JuH4oX
M5 Stainless Steel Hex Socket Head Kit - amzn.to/40115uq
Heated Brass Threaded Insert Kit - amzn.to/3ToPEKu
Heat Pressing Machine - amzn.to/3M2KtOK
Heat-Set Insert Tips - amzn.to/3nszAvg
Bambu Lab Printers:
Bambu Lab P1P 3D Printer (US) - bit.ly/Bambu-L...
Bambu Lab X1-Carbon Combo 3D Printer (US) - bit.ly/Bambu-L...
Bambu Lab UK Store - bit.ly/Bambu-L...
Bambu Lab EU Store - bit.ly/Bambu-L...
Enclosure for the P1P:
Bambu Lab P1P Enclosure Kit amzn.to/46AeGfA
ARC Bambu Lab P1P Enclosure STL Files - www.printables...
3d Printer Filament That I Use:
PolyLite ABS - bit.ly/PolyLit...
PolyLite ASA - bit.ly/PolyLit...
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFle...
PolyLite Silk PLA Blue - bit.ly/PolyLit...
NylonX Filament - bit.ly/MatterH...
PolyTerra Marble PLA - bit.ly/PolyTer...
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterH...
Build Series Silky PLA - bit.ly/BuildSe...
Build Series ABS - bit.ly/MatterH...
Build Series PETG - bit.ly/MatterH...
PRO Series Filament - bit.ly/MatterH...
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI...
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
GomeowCreation...
GomeowCreation...
Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ / gomeowcreations
One time support ➜ paypal.me/gome...
________________________________________________
Instagram ➜ / gomeowcreations
Facebook ➜ / gomeowcreations
________________________________________________
#diy #gomeowcreations

[@GomeowCreations]

Creality Ender-5 S1 (From Creality) - bit.ly/Creality-Ender-5-S1 Creality Ender-5 S1 (From Amazon) - amzn.to/3FwHVUI Creality Sonic Pad (From Amazon) - amzn.to/3YZUYoy Creality Sonic Pad (From Creality) - bit.ly/Creality-SonicPad Use code 5S80 to save about $80 on the Ender-5 S1 Speed Combo Ender-5 S1 3D Printer Speed Combo(From Creality) - bit.ly/Ender-5-S1-3D-Printer-Speed-Combo Enclosure Options: Acrylic Enclosure for Ender-5 S1 bit.ly/Ender-5-S1-Enclosure Soft Tent Enclosure - amzn.to/3GMXwkj Other 3D Printer Enclosure - bit.ly/Creality-3D-Printer-Enclosure Sonic Pad Mount For Ender 5 S1: Ender 5 S1 Sonic Pad Mount 3D Files - bit.ly/Ender-5-S1-Sonic-Pad-Mount Hardware: 4 x M5x35mm amzn.to/3ZdikHL 6 x M3x12mm amzn.to/3Tq27NS 2 x M3 Brass Inserts 4mm x 5mm amzn.to/3Jpicil If you doing to be building other things I suggest getting some hardware kits. They are a better bang for the buck. Here are some links to stuff that I used. M3 Stainless Steel Hex Socket Head Kit - amzn.to/3JuH4oX M5 Stainless Steel Hex Socket Head Kit - amzn.to/40115uq Heated Brass Threaded Insert Kit - amzn.to/3ToPEKu Heat Pressing Machine - amzn.to/3M2KtOK Heat-Set Insert Tips - amzn.to/3nszAvg Bambu Lab Printers: Bambu Lab P1P 3D Printer (US) - bit.ly/Bambu-Lab-P1P-3D-Printer-US Bambu Lab X1-Carbon Combo 3D Printer (US) - bit.ly/Bambu-Lab-X1-Carbon-Combo-3D-Printer-US Bambu Lab UK Store - bit.ly/Bambu-Lab-UK-Store Bambu Lab EU Store - bit.ly/Bambu-Lab-EU-Store Enclosure for the P1P: Bambu Lab P1P Enclosure Kit amzn.to/46AeGfA ARC Bambu Lab P1P Enclosure STL Files - www.printables.com/model/356301-arc-bambu-lab-p1p-enclosure 3d Printer Filament That I Use: PolyLite ABS - bit.ly/PolyLite-ABS PolyLite ASA - bit.ly/PolyLite-ASA PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95 PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue NylonX Filament - bit.ly/MatterHackersNylonX PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA TECSONAR Tricolor PLA - amzn.to/3H79d5N Build Series PLA - bit.ly/MatterHackersBuildSeriesPLA Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMatterHackers Build Series ABS - bit.ly/MatterHackersBuildSeriesABS Build Series PETG - bit.ly/MatterHackersBuildSeriesPETG PRO Series Filament - bit.ly/MatterHackersPROSeriesFilament Amazon 3D Printing Filament: PLA - amzn.to/3gsLE9Z PETG - amzn.to/3pXjjvu ABS - amzn.to/3wsTRjS ASA - amzn.to/2RX8dtM Polycarbonate - amzn.to/3cLdr38 Nylon - amzn.to/3iNGeI2________________________________________________ If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that. GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍 ________________________________________________ Other Ways To Help Support The Channel: My PATREON ➜ patreon.com/GomeowCreations One time support ➜ paypal.me/gomeowcreations ________________________________________________ Instagram ➜ instagram.com/gomeowcreations/ Facebook ➜ facebook.com/GomeowCreations/ ________________________________________________ #diy #gomeowcreations

[@nolanmanley5359]

90% of the reviews I see on the Sonic Pad talk about how easy the screen gets marks from use. Mine arrived this week and it has a screen save pre-installed. It's hard to tell it's there but a fingernail on the edge will get it to show.

[@GomeowCreations]

Yeah I've been getting a lot of comments telling me that the screen protector is already on there which is great but it's also super annoying cuz it scratches really easily I have also had people tell me to just remove it and there's a glass screen underneath but I'm just going to keep it on until it's so bad that I need to remove it I guess.

[@mykehdoom]

Why didnt you use the resonator sensor that came with the sonic pad?

[@spgod7360]

what about speed? benchmark inside sonic pad has a 25mm/s printing speed, have some one a realy boost of speed?

[@Zainab-ik9up]

I loved it. Greetings from Iraq ✨

[@kallenbrand]

Wow I wish my setup went that easy. Auto leveling won't work on the sonic pad.

[@GomeowCreations]

Really?

[@st33lp4d]

@@GomeowCreations i just updated my s1 to the latest firmware from creality and my auto bed is probing behind the bed....

[@The_Boog]

@@st33lp4dI’m having the exact same problem. Had to level by hand which has worked pretty well but if you’ve found a fix pleeeease share!

[@duocmat5192]

👍👍👍❤️

[@KarlF45]

No mention of the accelerometer? What do I do with it. Where does it attach.

[@GomeowCreations]

The profile is already setup for that if you're using a Creality printer but if you wanted to run it on your one you can as well. You will have to 3d print a mount for it to go on the print head. You will only run this once and then you can unplug it and remove it from the print head.

[@KarlF45]

@@GomeowCreations when you say already set up do you mean I don't need to attach and run it at all if there is a creality profile? So I can run my ender 5 s1 and my ender 3 v2? Can I run them both at once off one pad?

[@GomeowCreations]

If I'm not mistaken then yes. That is what I did with the ender 5 S1

[@changita]

I am running into so many issues right now and I just got the ender 5 s1 sonic pad bundle, there were bed leveling issues and then I have restored to factory settings and recalibrated and Switched out the usb-c cable and it still stops mid print and keeps giving the Klippy shutdown error due to disconnect from mcu, I tried to reset my 3D printer so I can use it with out the Sonic pad and it won’t, when I flashed the firmware to use only the 3D printer and I hit the reheat, the printer Reboots and loops in restarting so it won’t heat if I try to not use the sonic pad

[@chrissinclair4442]

What is the largest drive the pad will recognize?

[@jaycristobel5044]

Hey guys, IM super new to 3d printer and question if im getting a z off_set error code k281, anyone know where to fix that issue. My Sonic pad keeps telling me to fix the issue and then restart the pad and printer. Any help would be appreciated.

[@Lurch-11]

I just got my sonic pad/ender 5 s1 and I'm loving them.. but WORST sticker sheet I've ever seen LOL

[@GomeowCreations]

Lol yeah for the most part I just don't do stickers at all and they seem to come with everything I get 😅

[@travishaugen4403]

Used to like this channel when it was about handcrafting jewelry, not an at home manufacturer.

[@GomeowCreations]

Same and I didn't make this video for this channel but the company wanted me to post it to my larger channel to get my views. I told them that it's not going to get many views seeing that my subscribers on this channel really don't care about this. So to prove a point I did post it here to show how little views it would get here vs my other channel. That way I can show this info to other companies as well in the future.

[@travishaugen4403]

@@GomeowCreations thanks for the honest answer!

[@andreyamrakhov7016]

Como se llama la herramienta del minuto 4.00 la q calienta

[@johnstewart1266]

Wow, stole the whole video from Randy May. He's going to love this.

[@GomeowCreations]

Lol can't steal if you're the same person 😁👍

[@johnstewart1266]

@@GomeowCreations So what your saying is that since your can't get views on one channel you had to create a second channel to boost your views and # of viewers.

[@GomeowCreations]

I made a new channel because I started to get too many 3d printers and other stuff that didn't go well with this channel and was starting to take it over. But because my new channel didn't have that many subscribers companies wouldn't work with that channel on its own. So for a little bit I was posting to both channels. Once I got more subscribers on my smaller channel I was able to stop doing that.

[@johnstewart1266]

@@GomeowCreations Well, then you should post, or insert a disclaimer that the content came from your other channel. Come on guy it's KZbin. Other Channels do the same so why not you?