How to identify old bullet model | G2 model bullet engine external features | Must watch

How to find if an old bullet is G2.Watch this video along with the breather arrangement video before you plan to buy a vintage bullet.Dont get cheated.
Send photos of the bullet you wish to buy including serial number photos to the instagram channel #sonofagung2
#G2bulletspecifications #Howtoidentifyoldbulletmodel

[@667001]

Thanx a lot bro...you are saving many from becoming fools👍

[@asokravichandran6286]

Really appreciative bro 👏👏👏..None of them had been reviewed and how to identify those type of vintage engines.. hats off to your thinking and sharing valuable informations 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

[@siddharthpooja715]

Thnx Bro 4 ur information,I have checked my G2 and all things that u shown in ur video are available in My G2 Bullet, thanks again👍👍

[@atvg5854]

Really great video Anand!!!. This really helped me to identify some "FAKE" G2 bullets available in OLX. This video saved my money. Also a very special thanks to you for answering my doubts that i have made through whatsapp. You are not same like other youtubers. They provide their number just for publicity and not answer any query. I Already subscribed your channel. Looking forward to see more videos.

[@SonofagunG2]

Thanks bro..❤❤

[@mohammedsameersufi9548]

Bro u had provided a best info. Which help to choose a correct model of bullet

[@SonofagunG2]

Thanks bro ❤

[@Tarunkumar-uj4tc]

Try Yamaha rx 100 bike videos also ..lot of vintage two stroke lovers there..and that will help to gain some attention

[@SonofagunG2]

Okie bro..will definetely consider

[@akhiljohney6142]

Bro, do a video on fitting and removing rear cycle hub wheel ,it will be helpful in case of an tyre puncture.

[@SonofagunG2]

Thats a very important suggestion bro..definetely gonna make that

[@akhiljohney6142]

@@SonofagunG2 👍

[@indian1554]

@@SonofagunG2 bro are the vintage g2 bullet genuine parts available still today?

[@srpapersdwarapudi2413]

Good information , it is useful bullet lovers

[@dhruvsali889]

Very helpful sir really appreciate the video

[@SonofagunG2]

Thanks a lot bro..your kind words mean a lot..

[@dhruvsali889]

I was able to differentiate between my 75&59 model also a suggestion if you could do a video on carburetor setting to get the perfect only 1stroke in 0.75sec of g2 bullet

[@maashakti1713]

Hi sir, I myself own an 1976 model, when i ride it for only 10-15 kms the engine gets very hot. Is the heating problem due to (oil not circulating properly in the engine) In such case tightening or loosening of the pressure relief wall bolt helpful Please help🙏🏻

[@asefsha8378]

Thanks a lot for the valuable information. I would also like to know exactly what was the weight of the crank of G2 engine. Apart from that, it would be of great help if you can throw some light on the different crank weights of engines of 70s, 80s 90s and lastly in models of 2008 and 2009 cast iron. Thanks

[@SonofagunG2]

This is something even I am so curious to learn.From 60 to 71/72 it is approx 9.3 kg which we call as G2 crank.Then company began reducing the crankweight and those category of bikes knock when we ride in 4th gear at low speeds.It progressed from medium to light over the years. I am not exactly sure about the years but 83 has medium crank for sure.Thats about 8.5 i guess.The Euro one bikes have about 10.3 to 10.5 kg crank weight and they are the heaviest.These bikes range from 2005 to 2010. Some say its till 2008 only. The best way to check is to try to ride in 4th gear without clutch and see how slow she goes My 71 can cruise at 20 in third gear without any knocking.But it knocks in 4th gear but once in the groove it can ride smoothly in 20km at 4th

[@asefsha8378]

@@SonofagunG2 Thanks a lot for the valuable insights.

[@fuelarjun]

Amazing, great work Anand!

[@SonofagunG2]

Thanks bro ❤❤

[@prankvictorYT]

​​@@SonofagunG2hi bro share me your ig

[@clementsebastian1977]

Thanks a lot bro.. But is there any difference in the riding feel, thump sound or even in BHP... Please explain

[@SonofagunG2]

G2 is not so known for its pulling and mileage... its a slow streamer.. B series bullets are a bit better... as it goes over the years the pickup increses with higher vibrations as seen in post b series ones

[@clementsebastian1977]

@@SonofagunG2 Thank you, Gentleman

[@B.Genuiness]

Pls mention any one idenfication of 2008 model bullet. Any unique identity. Pls.

[@Maina1981]

Thanks for ur imformation

[@rajeshkhodadiya2266]

thanks for information on G2 bullet engine

[@SonofagunG2]

☺☺☺

[@babusam2462]

Hai....I am Babu....would like to know about B1 machine from which year to last and mor over whether it's the same G2? Waiting for your valuable information.....Regards.

[@harikrishnapj2737]

Can you campare g2 and b1 engine and pls tell me what are the major difference on both

[@SonofagunG2]

I have planned exactly that in my next.The major difference between the later G2 bullets ie from 62-68 and early B series from 69-71/72 is in the bearings.G2 is supposed to have brass bearings.Apart from that nothing is different.Similar crank and similar performance.

[@harikrishnapj2737]

@@SonofagunG2 thanks for the information, waiting for yours next video

[@asefsha8378]

@@SonofagunG2 Brass bearings? This is something new to me. Never heard of this before. On the contrary I from a veteran bullet rider that G2 engine had brass cam wheels and brass rockers. I even tried to source brass cam wheels and brass rockers but couldn't.

[@manojpanigrahi6961]

Bro I want buy 1968 but fear govt ban 15 year above vehicle

[@vishnukartha47]

Thanks bro, great info

[@SonofagunG2]

Thanks bro

[@sayandawn8355]

Could you please make a comparison between light & heavy crank bikes !

[@SonofagunG2]

Will defintely do bro..that is under construction

[@asishgoldenmemories9452]

Heavy crank weight is 12kg Millage is 30,35 It will run 15to20km speed in top speed without any problem. Light crank weight is 9kg Millage is 40-45 But can not go in 15-20km in top gear.and the thump is not so loud in light crank.its the basic difference Royal bullet and Enfield India

[@SonofagunG2]

@@asishgoldenmemories9452 Thats a misconception..The heaviest that company had produced is 10.5.If you have seen anything heavier then its fabricated. G2 crank is not as heavy as EuRo norms series which came in 2005-08

[@artistshk4557]

Thanks for the video bro, its a very important lesson for the new bullet enthusiast like me. 👍

[@SonofagunG2]

Thanks for the support bro..the initiative is to avoid any more of those mishaps with fraudulent bullets...

[@immanuelmanickam9399]

Hai bro thank you so much for such a valuable information. In 2010 point set standard model royal Enfield put a heavy crank shaft. My question is, whether this crank shaft is heavier than G2 crank? Will that 2010 model crank can be Replace in 1985 model engine? Hope you got my idea. Please answer bro.

[@JourneyWithCharnjeet]

@Bullet Guru bro ma scrap se G2 model bullet le raha hou. Apne hisaab se tyar krvao ga.. kaya bdia rahe ga na?

[@sgynair1650]

Hi, this is yogesh..and i have doubt that the point engine which came in last batch ie.till 2009 has heavy crank..? Apart from that any this special.

[@SonofagunG2]

Yes bro...Generally speaking that category from 2005 to 10 is heavy crank but there are some exceptions observed too..apart from that the quality of everything including machine parts is fantastic ..very refined engine

[@libin9840]

Thnxx broo

[@uttamtak7809]

Just one doubt, the rubber breath pipe has 2 screw to hold on right side of engine, which was last model or can specify series by it? Overall video is helpful ⭐

[@5432mithun]

Bro if I want to buy a standard bullet which type of bullet I can prefer (old or new)also which year bullets are better And how can I know the engine performance is good or bad please replay me....

[@mdfarhaan9716]

Thank you friend

[@SonofagunG2]

Welcome bro

[@prashantsingh4081]

Bro i need a help i have found a g2 bullet but i m not sure about its genuinety. Can you help me out plz....... 🙏🙏

[@karthikakarthika287]

Nice

[@ravine6790]

Nice vid bro👍. Btw can it be possible to reduce the tappet noice completely forever. Each time I do, it works only for a short period of time. Thus, there needs frequent service to maintain this. Is there any solution for this? I've been using a 98 model CI bullet for the last 9 yrs.

[@SonofagunG2]

That means the system will need a proper overhaul and probably lathe work.I havent faced the recurring issue in any of my bullets yet... Thanks for watching..

[@ravine6790]

@@SonofagunG2 Oh ok. But I didn't feel any other issues with my engine except this, so far. Sometimes the knocking sound becomes so annoying and overlaping my exhaust sound. The mechanic says it is a common issue with all CI machines.🤔 Anyways awesome vids bro. Topics you choose are very informative and helpful. Subscribed already👍

[@SonofagunG2]

Then its time to change your mechanic.I have used about 12 CI and none of them had persistent tappet issue. Thanks a lot bro for the support ❤❤

[@ravine6790]

@@SonofagunG2 Yeah. I too think so. Thank you. 😊

[@naeemcp]

I am planning to purchase a vintage bullet I have found some on OLX i need to know the difference between 1975 bullet and 1991, I found that 1991 is restored very nicely if you have any please let me know

[@SonofagunG2]

73 onwards its medium and light crank.They arent much smooth to ride as it comparatively the 75 has lesser vibrations and better handling..

[@naeemcp]

Son of a gun If g2 is not available I will go with other variants I need heavy crank better handling and less vibration

[@meenujithu9948]

@@naeemcp g2available

[@billasanghajatt]

Brother.... can I fit G2 engine in my 2009 model standard?

[@sameerprasad.motorcycling]

Hello.. a guy selling a bullet 92 model.. but the rc is expired since 2007 and the owner is died, the guy bought the bike from his son.. and now he is selling the bike.. the last price he wants is 25k.. Should I buy or not?

[@asifkto7742]

Never.

[@johnsanthosh2875]

I having a 1969 model bullet. Looking for a old spare parts like rear mudguard Nd A type aluminum main stand.

[@shyamjith5622]

Hello...I like to buy a second hand classic 350...Most of my friends suggested to prefer 2013,14 models...Is there any fact in this...???Can you please suggest me which year model bullet is better ..?

[@SonofagunG2]

Dont really suggest buying a classic no matter what the model is..Mainly because it vibrates like anything and looks kinda odd in my eyes..crank Weight is low too..if you wana buy a uce go for standard...the reason why people prefer older ones is because the build quality started reducing with time..hence 2010-14 are better than later ones

[@monkeydluffy10879]

Which model is perfect for daily usage ? (I mean models before 2010)

[@SonofagunG2]

I use my 71 daily... rides just like any new machine..If you prefer heavy crank which enables low speed running at 4th without knocking go for 2005-10 Euro norms compliant category.. 72 to 2005 are medium to lower cranks

[@monkeydluffy10879]

@@SonofagunG2 thanks brother

[@theasfamily19]

Nice video 👍

[@judepandian6051]

Could you share some pics to get info regarding 1954 bullet How to identify an original engine

[@akkishorts9635]

where I get g2 bullet plz reply back 🙏🏼

[@achu3352]

Bro i have a doubt in crank weight in each model frm g2 and 80s model bullet whts the crnk weight of them

[@praveenyuvan3]

Hi son of gun I have 2007 model is that heavy crank..??

[@SonofagunG2]

Could be couldnt be..there were both versions during this period..You could verify this from any Royal Enfield outlet near you...

[@kamalraj9228]

Does a G2 BULLET came in diesel version?

[@SonofagunG2]

Nopes..

[@lalu128]

very helpfull video

[@SonofagunG2]

Thanks a lot bro

[@lalu128]

i wish once we meet

[@SonofagunG2]

Where are you from bro?

[@lalu128]

I will call you later I notice your number i wish to buy vintage g2 bullet and i need your help thank you

[@SonofagunG2]

@@lalu128 sure bro

[@eldojoseph563]

Hi Bro, Is there any difference in G2 cylinder head, compared to other models. Most of the G2 owner and I personally felt an additional engine power or push in G2 engines.

[@vasansk12]

great tips, I was searching for Vintage bike but I couldn't find one. I found a 1992 model cast iron bullet, will you recommend it for the usage? I would really really appreciate your advise.

[@SonofagunG2]

92 is also a good model bro..but not as smooth as a G2 or B.There are ways to make them have the same feel too..

[@vasansk12]

Thanks bro

[@crazycracks3572]

Bro in my bullet pressure relief bolt and v cut is their but the oil rain bolt is not their can you say which model is it please

[@rajeshmahajan4259]

I have 71 model b1 series but after all efforts I am not able to update its papers in rto . They refused to update tax of old models and no. Series what can I do for my lovely RE B1

[@SonofagunG2]

Try a different rto office in same state bro..someone would definitely update

[@rajeshmahajan4259]

@@SonofagunG2 all efforts does not working

[@sishanthrs5408]

Can u tell me about the ignition key type in 1989 model bullet...

[@rajanikantyadav721]

👍👍

[@sainaikmude6475]

Brother is there any difference between 59-62 and 62-68 g2 bullet model apart from chasis?? Pls enlighten.

[@SonofagunG2]

Upto 62 most of the parts are British made.Afterwards Enfield India became self sufficient for most part.that 58-62 category has so many specialities.Similar year models have SR magneto and short delco the difference being the months of production.Then in 1960 they re introduced magneto again in the category which is called M series.I will make a detailed video of this soon

[@sainaikmude6475]

Son of a gun i am working a lot on vintage bullets as i want to have one good old vintage bullet which shall be unique to what we see on roads. Pls help me which is the best model bullet to buy?

[@sainaikmude6475]

Son of a gun thank you for the reply

[@SonofagunG2]

Well there are so many to choose from..all vintage collectors go for U frame with original old registeration from their respective state.If its convenient you can go for a magdyno model which comes before 58 or an SR magneto model which is rare by itself.But to manage these wont be too easy as you must be knowing. The M series which came in 1960 is also very rare.

[@sainaikmude6475]

Son of a gun how can we identify these models. I have some pics .i want to show it to ubefore buying . My watssapp number 8985519930. Is it necessary to buy from our state itself??

[@tharunpatel2424]

Bro! Am requesting you I need a vintage Bullet am ready to buy it please make me know is there is any vintage bullet available

[@SonofagunG2]

9048550903 whatsapp

[@ab_alpha]

👏👏👏👏

[@v1kvamshi47]

bro is crank weight of bs6 standard and classic is same...!!orelse standard has got heavy crank..!!?? i brought bs6 standard bullet which is same as old bullet look..!!

[@SonofagunG2]

Classic has lesser crank weight

[@edwindavies2653]

1997 model bullet belongs to which section

[@muhammednaseef4312]

I want to buy a old model bullet .which engine bullet is best choice

[@yaseenbaig9109]

Say about diesel bullet 🥲

[@atmancreation1656]

Was it manufactured a G2 engeene in 1976 ?

[@SonofagunG2]

G2 engines are till 1969 beginning..afterwards its b series

[@pramod.hanumappa]

Bro I have a bullet and it has all the features you have mentioned here for g2 and it also have 3 screws breather , but my engine number doesn’t have any G2 or B . But chassis number starts with 4B, so confused , please tell me whether it is g2 or not ?

[@SonofagunG2]

4b is 1984 model bro..maybe they have fudged the stamp...As in the RC isnt the original one..If i could see photograhs can give you a clear picture

[@pramod.hanumappa]

Son of a gun how can I send pics to you bro ?

[@subair22]

bro i have 1999 last maxismo eletra good or bad

[@SonofagunG2]

Bro machismo and electra are different models... both avl engines...not the old cast iron engine like stantard bullet.in those there is no point system which defines the old bull.. Machismo is like normal bike ...doesnt have any similarity to bullet thats the reason it wasnt a success... Electra is a bit better..some people increase the crank weight and are of the opinion that its smooth...

[@rushikeshnanaware9374]

1968 model g2 engine price bro

[@godsowncountry4577]

Do you have a full condition tuned g2 for sale ?

[@SonofagunG2]

Theres one at a fairly low price..contact me in this number 9048550903

[@syedhussain9528]

I purchase 1985 registration bullet but they says it's g2 engine

[@RK-sv8op]

Hey bro..I purchased a 99 model bullet 350 . I'm looking for a reliable shop to get a new paint job and some modifications..can you please suggest some shops in meerut

[@SonofagunG2]

Heyy there... I dont have any connections in that part bro..will ask around in the groups for you..something will turn up

[@shajishaji171]

If I buy old bullet which year model is best pls suggest

[@SonofagunG2]

Ones with stock heavy crank are smooth to ride..So before 73 or the 2004 to 09 category

[@shajishaji171]

@@SonofagunG2 thanks bro

[@mvijayamarthandan]

Bro make one video about bullet crank weight

[@SonofagunG2]

Sure bro

[@salmaanfariz161]

Bro I like to buy vintage bullet, but our govt put a rule to stop and scrap a old vehicles bcoz of bs6 engine arrives

[@SonofagunG2]

vintage collectors refer to some special regulation which excempts bikes which are more than 35 years old from any such bans.And these kinds of news have been coming since a long time.

[@mohammedsiraj8232]

Salmaan Fariz :hey bro where ru from

[@salmaanfariz161]

@@mohammedsiraj8232 I'm from Tamil Nadu bro U

[@salmaanfariz161]

@@SonofagunG2 That means I can buy vintage bullet. Is it not a problem?

[@SonofagunG2]

@@salmaanfariz161 as of now it is safe bro.. its not humanely possible to ban the vintage machines as a whole.. even the 15 years ban is a far fetched story except for metropolitan cities

[@sajalsharma3699]

@Son of a Gun - Hi, My friend has a Bullet, Manufacturing Year written on R.C. is 1936, how to know it is actually 1936 through Engine and Chassis Number. Brother, you have told in one of your Videos that there is a UK website which tells us the Bike's Manufacturing Year through Engine & Chassis Number. Can you please tell me which website is that. Looking forward to your help.

[@SonofagunG2]

Bro 1936 was way beyond g2 or G..thats an entirely different league..send me photos in whatsapp or insta..will find the truth about it

[@sajalsharma3699]

@@SonofagunG2 O.K.I'll send but the prob. is that Since then, it had many Owners and they changed it accordingly that it looks like simple Bullet. But you have immense knowledge, so I'll send you photos.

[@SonofagunG2]

Its simple bro...the foremost thing is the serials which cannot be altered and if so would mean the motorcycle has lost its identity...

[@zunaidhameed7796]

Bro I have 74 model bullet there is some noise in tappet please guide me where should I repair, waiting for your reply

[@SonofagunG2]

Tappet adjustment is like the basic solution to this but a noisy tappet could be a result of any damage in the entire system starting from the cam shaft to the valve

[@zunaidhameed7796]

@@SonofagunG2 suggest me place to repair

[@abhivtl2798]

you forgetting explain the brether pipe

[@SonofagunG2]

Didnt forget..already did a separate video on breather sometime back...

[@pratap8956]

Plz let me know if i can import g2 from uk

[@rrassociates8711]

ഭായ് എന്റെ കസ്റ്റഡിയിൽ ഒരു 71 വണ്ടി ഉണ്ട് . ഉപയോഗിക്കാതെ കിടക്കുകയാണ്. എടുത്തു പണിഞാൽ ഗുണമുണ്ടോ ? വ്യത്തിയായി പണിഞ്ഞാൽ കണ്ടീഷനാകുമോ ? ഒന്നു പറഞ്ഞു തരണേ പ്ലീസ് .

[@SonofagunG2]

Proper 71 anenki valare nalla vandi anu... Full restoration mechanic mare elpichal aruthu vidum...so engine work cheyyichu baki ellam swayam manage cheyyu..apo adikam paisa onnum avilla..for guidance channelil undu 71 restoration video 4 part

[@rrassociates8711]

@@SonofagunG2 fb link undo bhayide onnu contact cheyyaanaanu

[@HynalLivins]

I wished to buy a g2 engine

[@shivguru1836]

I have g2 engine

[@HynalLivins]

@@shivguru1836 for sale?

[@shivguru1836]

@@HynalLivins if you wish I will not disappoint you

[@shivguru1836]

It is 1969 model g2 engine with its original look no change in spares

[@thesumbitmohanty]

I have a 1979 model bro but I want a G2 model 😭 please reply Bro love from odisha

[@muslim-patao-muslim-chodo]

ohho 😢😢😢

[@sashikantbharti2852]

Hi .I want to purchase a old bullet .what the paper transfer process.please guide me

[@SonofagunG2]

If you are buying from other state you will need noc.If same state just normal transfer of name is enough.Verify that serial numbers on engine and chassis are same as that in RC and papers are valid

[@sashikantbharti2852]

Thanks bro i want G2 bullet.i am in Kolkata. any suggestions for me .

[@sashikantbharti2852]

Can I call you

[@sashikantbharti2852]

You have any G2 bullet for sale ?

[@noname-lv6oy]

👌❤️👍

[@GFL_M]

Kinemaster se banaya hai

[@SonofagunG2]

Yes bro..

[@sandeshpatil993]

Hi buddy, I am about to buy G2 model bullet. The owner has shared some pics of engine for identification. The G2 number looks bit suspicious. How can I share those pics with you for originality identification?

[@SonofagunG2]

9048550903 whatsapp

[@sandeshpatil993]

@@SonofagunG2 Thank you. Will message you over whatsapp.

[@frm735]

Bro how is 1998 model bullet ?I need to buy a bullet

[@sreejus2872]

What is the cause of engine jerking in 4gear

[@SonofagunG2]

Is it knocking...if a heavy crank bullet knocks then it needs timing adjustment

[@sreejus2872]

@@SonofagunG2 mine is 1983 model. I dnt know wheath it having heavy crank

[@SonofagunG2]

Its medium crank.. even I had faced the same...still try engine timing adjustment...

[@sreejus2872]

@@SonofagunG2 do u find the crrt adjstmnt ??

[@Aravindswamyrhs]

Genuvine review

[@SonofagunG2]

Thanks bro...

[@ketanpawar5877]

How to contact bro

[@midhunmammen1183]

how to identify old electra and standard bullet

[@SonofagunG2]

From the point or delco as it is called, the clutch cover , carb among so many other things

[@amirbagwan9789]

I'm also bullet lover and I want to purchase vintage bullet help me

[@SonofagunG2]

Definitely bro...You can contact in my whatsapp ..[phone]

[@amirbagwan9789]

@@SonofagunG2 bro Thank you

[@akashmishra7815]

Mera pas v h number lo 9576740312

[@user-pm3if2kx2x]

Price

[@aswinskumar8012]

Bro, I've messaged you in WhatsApp. Message is not getting delivered

[@MrUttam-ml1xq]

Where are you from bro

[@lambaavinash8]

I have msg u but U r not rplying on whatsapp not even reading it.

[@brick-b-rock7485]

Sir I want g2 model

[@njanarano]

We're is the chassis Nmbr location in g2

[@SonofagunG2]

Tilt the handle fully to the right and look below on the neck region...

[@kumarsahebasdeo3121]

Sir I need a G2 model pls reply

[@meenujithu9948]

g2 bullet is available

[@rrr_legend]

The V cut is called as Samosa In Maharashtra!

[@SonofagunG2]

Acha huwa ki Vada paav nahi bolte aap log usko

[@shivamphutane]

Is there any whatsapp group of son of gun

[@SonofagunG2]

Yes....9048550903

[@SonofagunG2]

Yes....9048550903

[@destinyisurs2393]

i have 1969 model bullect for sale with all documents full conditions

[@SonofagunG2]

Place?

[@destinyisurs2393]

@@SonofagunG2 Chitradurga town karanataka state

[@destinyisurs2393]

@@SonofagunG2 9036772331

[@SonofagunG2]

Whatsapp me bro..9048550903...We have a buy n sell group

[@morovlog9]

B2 engine enne parayunna engine undo bro

[@SonofagunG2]

78 nu shesham verunna engine angane parayarundu..

[@morovlog9]

@@SonofagunG2 Nalla engine ano

[@SonofagunG2]

Valye karyonnum illa

[@sree_thu_lip7642]

Shooooo

[@shreevignesh6419]

Your number buddy

[@SonofagunG2]

9048550903 Calling/whatsapp

[@anandbabu785]

U need to be get more knowledge about Enfield...my dear boy

[@SonofagunG2]

Oh please enlighten me father.....

[@karmazhaxi-of9op]

how can i add your whts app thank u