SORBY SKEW CHISEL, WISH COME TRUE

Short story is in the video but once again Brendan thank you for this awsome gift.
Here is link to Brendan KZbin channel
/ @baconsoda
Enjoy
AFFILIATE LINKS
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
CORONET REGENT LATHE
www.tobi.si/Co...
SC4 CHUCK
www.tobi.si/gl...
______________________________________________
KS BOWL GOUGE
ksdrechselbeda...
CROWN BOWL GOUGE
ksdrechselbeda...
KS SPINDLE GOUGE
ksdrechselbeda...
This links are affiliate links. If you click on such affiliate link and make a purchase via this link, I will receive a commission from the online shop or provider concerned. The price remains unchanged for you.
TELACK
www.telack.hr/...
SANDING DISCS 75mm INDASA
www.telack.hr/...
SANDING ROLLS INDASA
www.telack.hr/...
Thank you very much for watching 🤗

[@baconsoda]

Hi Tomislav, I missed this video going up yesterday as I was sick but you sure made my day with your very gracious thanks. I hope the tool provides many years of good service. And I'll be copying that donut spinner for sure. Many thanks, Brendan.

[@tomislavtomasicwoodturning]

Thank YOU Brendan for lovely gift🤗

[@jayscott306]

You've added new life and personality to the KZbin community. That's not saying anything against the current great KZbin turners, it's that I've seen a few give up making videos and no one of the same calibre filled the void. And I thought we had it great with Richard's 2-3 videos per week. I'm grateful for how much content you produce, Tom. I'm glad so many people support you. I hope you don't get too many hostile comments. I don't go down there to look. Lots of nice comments but one ignorant person can sour my day. It was very good to watch skillful skew use. I hope it treats you well!

[@tomislavtomasicwoodturning]

Thank you Jay for kind words 🤗 I'm lucky as really not many hostile comments and support I have from you viewers are another level.... Thank you

[@richbulak7145]

Tomislav, what a beautiful story. You are touching many people with your videos.

[@tomislavtomasicwoodturning]

Thank you Rich for very kind words 👍

[@sylvesterldoolittle3608]

Great story. I have become a regular viewer of your channel. Never thought about making tops until now !!! Thanks.

[@tomislavtomasicwoodturning]

Awsome, glad to hear that and thank you for watching

[@kevinbooth2063]

Tomislav, very nice I have to learn to use my skew chisel. I had a nasty catch and now I’m hesitant to pick it up and use it.

[@tomislavtomasicwoodturning]

Thank you Kevin, good thing about skew is that when you have a catch it usually messes up the wood , with gouges is much more throuble..... Just keep practice and more practice 🤗

[@kevinbooth2063]

thanks I will keep practicing

[@William_Kenny]

Another great video Tomislav enjoy your new skew, kind regards from will.👍

[@tomislavtomasicwoodturning]

Thanks Will, much appriciate 🤗

[@sandiekelley8513]

You make great videos. While watching this one I had an idea. Where you drilled is round and the tool is flat. I thought you might fill-in that gap with baking soda and superglue. That is for the deep in there. Then have the glue and sawdust to close the top of the open space. Then no more gap. That is if there is a gap.

[@tomislavtomasicwoodturning]

Thank you very much for watching and comment, Usually what happens when you force squere shank into round hole is that corners dig in and the fit is with just tiny gaps of circle.... Not much to worry about,but if it was bigger then I put thick CA glue which if one day I want to change the tool its relative easy to cracked.

[@jackthompson5092]

Congratulations on your new skew chisel Tomislav.

[@tomislavtomasicwoodturning]

Thank you 😀

[@johnnyb95678]

Great video and nice skew. Thank you for sharing your personal story with us.

[@tomislavtomasicwoodturning]

Thank YOU ☺️

[@jorisdemoel3821]

very fine gift indeed, and you put it to good use. Ash handle I presume? Thanks for sharing another educational and instructive video

[@tomislavtomasicwoodturning]

Ash it is .... Very nice gift and I found that I use it all the time 🤗

[@MPLMWorkshop]

Cool. I'm ofering to laser engrave it for you, if you want.

[@tomislavtomasicwoodturning]

Thank you pal, we will do something

[@NBCRGraphicDesign]

I, too, have been enjoying Brendan's woodturning and gardening videos for a few years. He is one of those kind-souls on KZbin. Thank you for sharing your skills and your techniques, too.

[@baconsoda]

Thank you Dave.

[@E-Glide]

Good video, Tomislav. As soon as you said Brendan, I thought it might be the guy I've been watching for years...and it is! He is a pleasure to watch and I can highly recommend his channels

[@tomislavtomasicwoodturning]

Indeed he is... Thank you for watching 🤗

[@baconsoda]

Thank you E. Glide.

[@stevenhansen8641]

🕶nice work Tomislav. Thanks

[@tomislavtomasicwoodturning]

Thank you Steven

[@lenshandcraftedwoodsigns6033]

Always enjoy your videos.

[@tomislavtomasicwoodturning]

Thank you, really glad to hear that

[@KoHcTaHTuHAkuMoB]

Отличная работа 👍👍👍

[@tomislavtomasicwoodturning]

Thank you

[@ShevillMathers]

Nothing like seeing such a quality tool as a , gift from viewer, Brendan, thank you from me who is also learning so much from Tomislav’s regular and well made presentations. Greetings from Tasmania Australia 👍😁👍🇦🇺🦘

[@tomislavtomasicwoodturning]

Thank you sir.... 🤗