Samsung tv UN70TU700DF restarting no picture

[@whitesborowillis]

Had my 50in Samsung all of a sudden have this issue. I found those video after some online searching and a year or so later it STILL works!!!!!! Saved me the cost of another tv at least in the short term. My tv is only 2 years old smh. Thanks for the video!!!

[@damast3r14]

You are incredible! I saw the trick with the tape and had been able to fix my backlight from flashing by covering pins going into the mainboard. I couldn’t get picture though, I didn’t realize there were more ribbons and pins going into the panel under the speakers until this video! Very optimistic I can fix it now. Thank you so much!

[@dominoez21]

Thank you for posting this repair video. This scotch tape method worked on my Samsung UN55KS8000FXZA that kept boot cycling. I did this initially and it did not work. I knew I had a good power supply, but was not sure about the main board and led panel. I went ahead and installed a new main board and no change. I did not find any burned resistors on the led panel. Went back to scotch taping along the 2 connectors on the main board. Tried a few different sections and then all of a sudden, voila! For anyone out there with a Samsung and who has tried almost everything, try the scotch tape method again on various sections. You may get lucky! It’s worth a shot and costs zero dollars!

[@nathanielassibi8417]

In fact, you are a genius. Thanks for help saving me from sending my tv to technicians who may end up damaging my tv or cheating me😊🙏

[@hammiranda]

You're a genius. I almost threw this tv in the trash after replacing the main and power board and having the same issue. Thank you my friend 👍

[@SOSfixElectronics]

enjoy

[@flacoanemico5199]

I picked up a 70' inch Samsung 4K 2019 model from the trash today. I'm using it as I write this now. I thought I would see some new designs int technology but never thought I would get it to work. I moved the tape like in the video just 3 times and got the TV working. I started laughing from amazement. Thank you!!👍

[@nastra30]

Holy. I was skeptical but it worked. I resurrected a un50au8000 tv with a bootloop using tape. TV was about heading for the dumpster. Thanks; your video is well explained and it help saved my TV.

[@MrBesmir7]

Tape just brake cicuit of wire that are menge together usually one .two wire should tape

[@jowensblack48]

Well I’ll probably never buy another Samsung tv. The amount of people I’ve seen with this problem is ridiculous.

[@335AMG]

Thank you so much for your tutorial. I just saved my Samsung QLED TV from the bin using your taping method. You are a genius.

[@SOSfixElectronics]

Glad it helped

[@o.g.-reala3326]

​@@SOSfixElectronics Will replacing the ribbon fix this issue?

[@bauschnlomb1]

Man it worked ! I almost gave up . So many pins to tape , and the tape was sliding but it worked in the end . No lines or anything either . Found the exact contact to tape off . I folded the tape over the top so it would stay in place when sliding the connector in and out . It happened exactly after 3 years . I was close to buying the same model and just switching the back cover panel with the serial number and then return the faulty TV and keep the new one and get my money back . It’s gonna fall back on Samsung anyway and not the shop that’s selling it . Glad I didn’t have to do that . Samsung needs to do better ! 3 years is not acceptable for a tv . Needs to last longer IMO

[@jjardone]

my tv broke the same and I had exactly the same ideea to buy one and swap in the same day, but I can’t find anywhere the 58 inch size any more.my tv broke after 2 years now I am going to try this taping method tomorow,too bad they don’t sell that size any more arround here.

[@bauschnlomb1]

hope it works ! took me over an hour to find the right pin , don't give up @@jjardone

[@KyleSand]

Thank you it helped me locate the problem data line and get the TV running. Do you think it would be possible to use a power supply to clear the short with some significant current?

[@SOSfixElectronics]

could be a short or dead pixel line. no cant clear the short inside the screen, you may burns the traces by using power supply on data lines,

[@KyleSand]

@SOSfix Electronics this guy just posted another solution too (i use auto-translate subtitles) kzbin.info/www/bejne/oqXHdn-or7WWqKs

[@nicketon6940]

So many Samsung customers around the world having the same issue. This raises the question why don't Samsung do anything about it?

[@SOSfixElectronics]

check t-con voltages

[@Keepersofthekrypt]

Because it's a fucking scam and it's called consumerism. Almost everyone had this problem after warranty was over. I'm currently trying to fix mine as well.

[@leilagarcia9451]

They should give our money back!

[@baciudan7312]

If i would tape all of pins what would happen?

[@PDZsolt]

Yes in some country a samsung tv is same price as peoples monthly wage. If you buy something expensive like that you should expect a long life for it.

[@jerryjaquez292]

🙏😅😅😅 thanks I fix a TV that I found in the garbage because of you you the best thank you new TV for FREE JAJAJAJJA

[@flacoanemico5199]

👏👏👏👏 Good find. Its amqzing what one can do in their spare time. Just dont watfh too much tv. Or you'll waste your time instead of finding and fixing more stuff. Keep at it 👍

[@rgamt]

Thank you! Finally one video that helped :)

[@matteofeola6550]

Thanks, a coffee for you! In my case worked to cover the 21th pin on left flat. (RU8000)

[@johnzachariou6046]

Always a good job I also like the way you work with your family

[@damircvijic980]

Great video. You are a master. Having the same problem.👍

[@joeyladouceur3483]

Thanks!

[@SOSfixElectronics]

thank you bro

[@james2396]

Legend

[@SOSfixElectronics]

thank you

[@phillwilson6644]

After watching your video , I fixed my tv, thanks so much , 👍👍

[@shankarganesh1913]

Your video was of great help, i am able to get the start up sound but no Samsung logo.. what could be the problem here?

[@craigcampbell6933]

Thanks for posting this I was having the same issues of Screen going on and off, with only the backlight when it was briefly on. My TV problem was in the same general area as yours. Narrowed it down to one or two traces, they are very narrow so hard to tell. Anyway picture looks great still cant tell any issue.

[@SOSfixElectronics]

Glad it helped

[@kensan3118]

Thankfully for showing me the way to bring back life from death TV

[@DevonMiller-ur4yo]

Your the best friend good job i love it❤

[@monstersinc20111]

thank you ...great video my tv worked

[@NotFoxUK]

Top G bro thank you I will try copy your position first then I will use the same method to fix my TV hopefully

[@ItzsDev]

If I buy a new ribbon cable would it fix the problem? also I tried this but when I cover one pin it stays on but if I cover other ones as well with the one covered it keeps boot looping with no picture, now it will boot loop either way even if I have the cable covered...

[@DevonMiller-ur4yo]

Wow !! I respect ever move u made am sooo happy fo this information

[@borisdg]

Is the TCON part of the main board, because I cant see dedicated board in the middle bottom part?

[@SOSfixElectronics]

yes in the main board

[@borisdg]

@@SOSfixElectronics Thanks! So it seems they are saving every penny. :D

[@liro7245]

Mine has sound and black screen - but no backlight. So this fix won’t work for me. Ideas on troubleshooting that pls?

[@joeymcdougal1021]

is there any special tape needed?

[@kasman72]

I have sorted the pin that was causing the reboot, now i still have the left half of the screen that looks a bit darker or almost reddish would this possibly be fixed by finding another pin that need covered?

[@chrisharp9288]

I have a un70tu7000f part number sfpcx695g-007 that brown ribbon cable it ripped. You have any or know where to get one or a set .

[@SOSfixElectronics]

ebay

[@erhankurt7633]

Bende samsung 75inc tv var dediğinizi yaptım ama şimdi yatak çizgiler var eskiye göre iyi oldu ama bu bant yerine anakartı komple değişsem sorun düzelmezmi? Yani anakart değişimi kökten çözüm değil mi?

[@nataf10]

Nice Job. Thank you for sharing.

[@bobsoft]

I had the vertical line problem on a Sony TV. Tried to do this method but found out the TCON flex cables were bonded to the board. What do you do in those situations?

[@SOSfixElectronics]

usually this way works on horizontal line. the vertical linked to the bottom COF, genteelly press on the COF edge to the board or to the screen when the tv is on and see if the line will go, if it dose you may apply a rubber piece to the area that causing the line

[@browniecoleman1540]

You guys doing an amazing job, I have a Samsung 70'' smart TV and it's restarting every 5- 10 sec please is there anyway I can send you the money for a board replacement so you can ship it to me in Ghana 🇬🇭 please I don't wanna buy new tv

[@SOSfixElectronics]

@@browniecoleman1540 sorry we dont sell the boards you can order it from aliexpress

[@HOTCOCOyummy]

Just got my Samsung tv diagnosed at a repair shop and they said it was a short in the LCD panel assembly and it would need to be replaced (very high quote). I’m about to just toss the tv but found this video. Would this trace tape possibly do the trick? I’m willing to try.

[@SOSfixElectronics]

It's worth trying it

[@nicekoko666]

Thank you so much for this video!!

[@logankapansa]

Thanks very much ,it's working

[@innovatemind-kb6eo]

Thank you sir, Good.😊

[@asebain838]

Merci beaucoup !!!! cela à marché pour mon TV Samsung70TU7025..... Magnifique, elle fonctionne à nouveau correctement , on verra combien de temps cela dure !!!!

[@james2396]

I was about to give up and get rid of my TV that has this exact problem, you are a fucking legend, I’m going to try this again and see if it works

[@james2396]

Update: I got most of it working! I think one of the embedded drivers in the ribbon cable is a little fucked, however the TV now works thanks to you! I've got distorted reds on the left side of the screen, with some black lines, but they're not bad enough to make me want to get rid of it

[@JamesJackson-sp2kp]

@@james2396 just keep going it's probably just 1 more trace to block from circuit

[@o.g.-reala3326]

Will replacing the ribbon fix this issue?

[@NotFoxUK]

I don't think so because you are blocking the signal from a tracer but if you try it and it works please let me know

[@freekingsweet666]

Holy shit this actually worked on my samsung 70" UE70TU7100K . I have very faint lines running across the entire screen still but i cant be bothered to open the tv back up to try and get it any better, its good enough. Thanks for the video.

[@adamfaircloth9274]

I have the exact same tv as you!!!....I am trying this right now!! 😂

[@Oussama-gx6co]

@@adamfaircloth9274 does it work for you ?

[@suzukostel]

Thank you very much,very useful.

[@Manu-yc9ji]

If I disconnect the right flex : black screen and no reboot. If I disconnect the left flex : black screen and no reboot. Is it necessary to put tape on some contact on right flex and on the left flex ? Thanks

[@iwangrachmansyh6130]

Thanks for your sharing, its worksss🎉

[@StooMoo]

What is the problem if when I i disconnect the ribbon in one of the first steps and it still loops on and off?

[@SOSfixElectronics]

could be anything except the screen, disconnect power board from the mainboard to see if the backlight turns on and stays on. if yes it should be the mainboard issue

[@ashivsookun]

Hello, do they sell that yellow ribbon that you have taped?

[@Dengurii]

Hi, I have 50inch TU8000, by using this method I found 2 pins/traces that I can cover for my tv to even start. So, I can cover any of them (one or the other or even both) and it will be on, but no picture for any of them. Do you have any advice on how to get any picture? Like, I can try covering more besides these two, but I don't seem to get any picture. Also, if I cover any without covering at least one of these 2 traces, the TV keeps restarting.

[@SOSfixElectronics]

could be there is more traces needs to cover

[@Dengurii]

@@SOSfixElectronics I tried covering other as well but I got no picture. Interesting, there is a flat cable that goes directly to the main board and I tested a bit with that, but only got few lines visible when I cover some of the traces. I don't know what's the difference between these 2 cables.

[@Dengurii]

Ok, figured it out. In my case, it had nothing to do with that flat cable (brown-golden one connecting two halves of the screen leds), but the one going to the main board. And I had to cover *only one* pin, which was about 15th or so.

[@Evgeny_Trubitsin]

@@Dengurii Hi. How did you managed to find that out? You have tried brown-golden cable on both sides, all pins, one by one? Fighting with same issue - can't get it done. Found 1 pin on left side closing which stopped the cycle reboot, but still can't get the picture back.

[@Dengurii]

@@Evgeny_Trubitsin yes, you don't really to try both sides as it's the same on both just mirrored. Disconnecting the flat cable connecting the main board to the smaller led board stopped the rebooting so then I kept covering groups of 4-5 pins on that cable until I found the right one

[@rayfiore7779]

What is actually happening when you cover traces on the ribbon cable? is it shutting down LCD/LEDs in the back light or in the picture matrix?

[@mahmoudsaid153]

Very good job 👍🏻

[@SOSfixElectronics]

thank you bro

[@bikkel5337]

I have the same problem with a ue70tu7172. I can tape 2 lines separately or together to get it working but a line remains in the image. can I do a combination of taping with the left and right flat cable such as 1 line on the left and 1 line on the right?

[@SOSfixElectronics]

Yes some times may need to cover traces on both sides to get the screen to work.

[@watchdogu.s.a.8973]

A friend brought me a Samsung TV today that this same symptom so I'll be trying to find the problem tomorrow. I have an LG 75" that I've had for two years. I first bought a Samsung 70" and within 30 days there were colored horizontal streaks. I was within the return period so I gave it back and got the LG. The LG looked sharper and better than any of the other models on display at Sam's, anyway... except maybe a Sony but I'm sure. Since then I've seen many people throwing out of warranty Samsungs away because of display and power problems. If my LG dies I'll get another LG. In the meantime I'll maybe fix the Samsung and use it in my shop or bedroom.

[@RixtronixLAB]

Nice video, thanks :)

[@allinthedetail8823]

Great video!! I have this exact model and having the exact issue. I am going to try this method, but is it possible to purchase just the flex cables from somewhere and replace them so there isn’t a bright dot on the screen? Thank you!

[@SOSfixElectronics]

no the problem is inside the screen, replacing the flex cable will not help

[@allinthedetail8823]

@@SOSfixElectronics thank you! Good to know.

[@ardiyexproduction3479]

My Toshiba 50'' smart TV shows light and sound but NO DISPLAY. It's the new TV . can you assist me with this? I can repair just need guidance.

[@SOSfixElectronics]

try the tape method

[@ardiyexproduction3479]

@@SOSfixElectronics But before tape method, Joe can I know where is the fualt , pls reply Thanks

[@HungryGHungarian]

Holy shit, I just did this and fixed my issue!!! Unreal. However, I can't get the lines at the top of the screen to go away... I tried moving the tape to cover the connections, but nothing.

[@yumyum3876]

What’s that brown cable called exactly? Can I get a new one? Your repair worked perfect for me except that I see pinkish tint on left side of screen. Do I need to narrow it down?

[@SOSfixElectronics]

flex cable you may find the on ebay. those cable dosent go bad except water damaged or cut, needs to find the right traces to cover

[@sirfiretvbully9030]

I got a new one for you... Samsung un75ru7000... Plug it in and you see the Samsung logo and it comes on and it keeps looping.. but at the same time sometimes it comes on all the way to where you see the apps popping up at the bottom.. I cannot find any problem everything's seems to be at the right voltage.. but there's a kind of a halfway buzzing halfway clicking more of a buzzing though coming from the power board and when the TV is on and going through the loop, the back lights seem to flicker not not really a full flicker but kind of you know you can kind of see a little bit of it getting brighter and it goes along with the buzzing sound coming from the power board I mean I'm thinking of just replacing the power supply but I can't find any problem? Have you seen anything like this?

[@SOSfixElectronics]

disconnect the mainboard from power supply plug it to the power to see if the backlight turns on and staying on longer

[@sirfiretvbully9030]

@@SOSfixElectronics yeah I did all that already.. I did all the usual check points.. I'm guessing it's the power supply and that's just cuz I can't find anything else and the power supplies making the noise LOL

[@Subseed]

i have a 58 7000....i have the same issue....this video does help on determining if its the power or video module...have u found a fix...my cover is off for the last few days tryn to figure it out...i did find parts for it...just wondering your fix if any so far??

[@bhawanjitsingh6283]

Very useful ..thank you so much

[@dobrilstoev2925]

I am dealing with simmilar one now 50tu8000. It was reseting itself and i tried to play with the tape and got some pictures and the weird now is that i have full picture without any tape on the ribbons. I have no idea how that happened but i do have few horizontal lines which still cannot clear. Any ideas please

[@barry1262]

i have 50tu8000 3 y.o. after 2 years lost picture then 5 days later picture came back on with no tape on ribbons , then lost picture again after several months and then after 3 weeks picture again came back on , i also have no idea why this happens ?

[@bogdanovicfamily6289]

Did you remove the tape from the left side? Is there tape on both sides, or just one?

[@SOSfixElectronics]

one side

[@M0h0m3d]

My tv is restating whenb connected to internet. But when i disconnect from internet and use external antenna ti watch tv or watch KZbin via external box no issues. Looks like software issue with smart tv. Any suggestions what to fo

[@brianlivingston415]

What kinda tape you using??? I’m going to try and fix my tv

[@SOSfixElectronics]

any

[@James-929]

Maybe someone can help me, I had the screen on my 70" Samsung flickering on n off,I assumed it's panel,I tested psb,n it's good. I unplug mainboard TV comes on to black screen but no picture or sound, led strips work fine, I tried unplugging each ribbon to each side of panel to see what side it is, but no change undoing each side. I can hit settings etc, but can see led straps flicker like it changes channel, but no display at all. Can anyone tell me what's issue. Has no t con board.

[@Evgeny_Trubitsin]

@James-929 Hi. Have you found a solution for your case?

[@tito-vm7nr]

my tv back lights come on when i lift the tv on one side while it’s facing down. i touched the green strip on that side and the LED flashed on. what would that be?

[@SOSfixElectronics]

could be bad lcd screen

[@tito-vm7nr]

@@SOSfixElectronics i got the screen on and the tv to work but top half of screen is slightly darker than bottom.

[@wisher21uk]

If that’s getting hot where it’s lighter, it can crack the screen I have had that before, it seems to be more common now that 4K is the norm, maybe pushing screens to their limit doesn’t help, great fix though.....

[@SOSfixElectronics]

i left the tv on for over 24h checked that spot is not hot, if the tv screen still getting hot that is mean still shorted traces

[@anvarzodaabdulaziz4196]

After taping it works but the problem comes back again after couple days. What would you do in this situation?

[@SOSfixElectronics]

@@anvarzodaabdulaziz4196 screen is deading

[@TS-qd2uj]

I HAVE A BIG THANK YOU AND A QUESTION! Thank you so much for posting this fix. My "Just out of warranty" UN58TU7000FXZC had the symptoms you indicated. By following your instructions I was able to tape 3 tracer contacts which gave me back my TV, no lines, but I do have more purple, red, pink hues on the left side of the screen. For example a blue car will be green on the left and blue on the right, however some shows look good as before, so liveable. If I was to carry on and keep moving the tape do you believe I could potentially get back everything to normal? In my notes, I'm at "position 14" and so happy to be where the TV is at now, but could I improve on it if I keep moving locations? Should my tape be narrower to cover only two tracers? In any case, thank you very, very much!

[@TS-qd2uj]

Update: I'm now using two separate single tracers. This seems to have lessened the purplish/pinkish hues on the bad side, but they are still there. What I do not understand is why some apps appear totally unaffected by this bad area and others are.

[@SOSfixElectronics]

is depends the level of the color. sometimes i face that too just try to reduce it by changing the picture settings in menu

[@TS-qd2uj]

​@@SOSfixElectronics Thanks for the reply. That's what I ended up doing. Interesting too is that I found out that some documentaries on KZbin also have nice displays, while others have this colour problem. So I can live with that for now. Some Apps have very good displays all the time, others are bad all the time. Thank you for your incredible help nonetheless!

[@yentsaiwang]

I fixed my UN75NU800 TV, thank you! I only needed to tape off 1 pin of the left flex cable to get it work. However, there is a horizntal line running across the screen. Is this something can be solved by finding more problematic pin or this is probably the best we can do?

[@jujigatame4800]

I'm a little confused. Can we just replace the cable rather than do this tape method? Would it work?

[@SOSfixElectronics]

nope

[@janetburkett3162]

I like your videos they are good. I have a 70 inch sharp tv model number LC - 70LE660U .The tv turns on the back lights but they want turn off with the power button. I was wondering if you have ran across this problem.

[@Void-0079]

If your TV back lights don’t turn off it’s probably to do with your power button unit. My tv has a power button and a signal receptor for the remote together. Make sure you have good connection in the wiring from the power bottom to where it leads. If you know how to use a multimeter see if you have continuity in the wires. Good luck!

[@ernest5998]

Thank you You served me a lot of ching ching 💴

[@legendica23]

Is it possible to 100% eliminate this malfunction? because I see that almost everyone has unwanted lines. Why does the tape stick? Is the problem with the contact where the cable goes?I have an offer to buy a 75-inch television that has this problem. But to whom should I sell the television that has unwanted lines.

[@MaximeLevesque-kg6yo]

I did covered the same choices pin 6 and 10 and its not working for me . Covered only pin 10 bring back the tv from the bootloop but there light lines and top half of the tv lines flickering .

[@SOSfixElectronics]

that line what causing the screen to goes bad . no solution for that

[@MaximeLevesque-kg6yo]

So bad .. thanks

[@theones.whowrite]

Hi I have a Q80T 75inch, I’ve covered all 3 ribbon cable traces. Still no picture. Please help

[@aidilfazren9090]

Hi there sir, i got issue, suddenly no power at all. But after i reattach cable from main board to power board, its on but still blank. May i know, what is wrong ya

[@SOSfixElectronics]

Bad luck panel try to use the tape method

[@aidilfazren9090]

@@SOSfixElectronics but, there is no power, how can i test it??

[@gnzlz3rdcoast197]

Whats if the tv turns on for like 20 seconds and off white light on power button

[@SOSfixElectronics]

disconnect the screen and see if the tv will stay on

[@gnzlz3rdcoast197]

It wouldnt stay on i was checking the ribbon cables and connections disconected the power cable reconected the tv split in half then its all black now and just keeps turning off

[@yeshanp]

I had the same problem and your solution worked! But now one side doesn't show blue colours. Is there a way to fix that?

[@Mancity1102]

I was able to get a clear picture with the tape, but Now I have a black vertical line on the left side of the screen. Is not big. Is there anything I can do about that?

[@SOSfixElectronics]

try move the tape or use different size

[@gradysanner1713]

Great instructions! Have a 2 year old 50 inch CU8000 with this problem. The screen started looking like a black cloud descending from the top and then finally picture went and TV restarts repeatedly. Took it apart. What do I have to lose? Just use standard electrical tape?

[@SOSfixElectronics]

yes

[@gradysanner1713]

Thank you! I now have a picture, but left side is darker. Not black, just darker. Going to keep trying. Amazing. Thanks again. @@SOSfixElectronics

[@gradysanner1713]

I'm getting a good picture except for too much magenta on the side that was originally darker. Any suggestions? @@SOSfixElectronics

[@Leprechaun2055]

Got a 70" Samsung TV doing the same thing. Found that if I cover pin 12 on the top ribbon cable the TV will turn on, but 3/4 of the screen has very dull color. If I leave the TV on, disconnect the ribbon to remove the tape, and reconnect the ribbon, the tv reboots and the picture is perfect. If I turn it off and back on, it returns to the same loop and I have to start the process all over.

[@markgarrison9719]

I have the exact same issue as this person with. Could somebody please give some possibilities to why this is happening and how to fix it!?!

[@damast3r14]

Same issue here

[@Void-0079]

You can’t remove the tape. Even if it might solve the issue temporarily the tape has to stay on because you have a bad connection there it’ll keep doing the boot loop without the tape.

[@brunom1110]

Hi mate. I was having the same problem on my samsung ue43tu7005kxxc and i managed to put the tape on the right place but now i dont have any backlight.. Are the LEDs fucked too or is it something else? Thank you

[@davidhorn2063]

Hey thanks for this video!! I managed to get clear image but the very left side of the TV is with a black stripe/block - vertical one. I am trying different combinations but it always when there’s imagine there’s the black block. Any help on this one please? 🙏🏼

[@Void-0079]

Vertical lines are due to bad connector from the panel to the screen itself (look like ribbon connectors on the bottom but permanently glued). Can’t be fixed unless you replace the correct connector which is very difficult without the right equipment.

[@steveschwenke9636]

What kind of tape

[@Basketballlove213]

What kind of tape is that?

[@Basketballlove213]

Used to cover the traces

[@TheEmotionalPiano]

I did the trick and marked 2 lines, but I still have 1 big vertical line in solid black over the screen, is that fixable with taping? or is that just the faulty screen

[@yentsaiwang]

Did you ever fix that? I got a horizontal line running cross the screen too 😂

[@danieltrejo12dt]

Did you ever fix that? Having the same problem right now ​@@yentsaiwang

[@danieltrejo12dt]

​@@yentsaiwangdid you ever fix it I'm having the same problem right now on a 70 in Samsung

[@yentsaiwang]

@@danieltrejo12dt The TV was fixed using the method in the video, but there are still missing lines. However watching the tv from 3 meters away it's not that bad, I did later buy a Sony 85" as main tv.

[@jamesbounsall5478]

To make it easier on yourself - try have a mirror under the tv, you don't have to look down.

[@raydal]

Can't someone make a TEST JIG with micro switches to use for these repairs so you don't have to use tape all the time. You just turn off the corresponding DIP switches and then you can use tape after you find the correct traces.

[@tam6187]

I see that it works at a reduced capacity. Is there a way to get it back to 100% is there a reason why you cant replace that connector?

[@SOSfixElectronics]

is not a connector is the screen it self bad

[@maximelevesque1988]

hello i did put tape on pin 6 and 10 but my image do a little color flickering lite flickering .. image are perfect except this flickering , is someone have an idea thanks

[@maximelevesque1988]

flickering is more on the side i put tape on pin 6 and 10 like you did , a litr flickering image are perfect but color changed a bit every 1-2 sec

[@SOSfixElectronics]

@@maximelevesque1988 yes still more traces need to cover try smaller and bigger tape on different traces

[@truepatriot8751]

You have a lot of patience

[@romeojhd3720]

Thank you so much for this video!!! It helped me quite a bit but I’m a little stuck on another issue. My Samsung QLED Q70T tv was power cycling on and off when plugged in. I followed your troubleshooting process and got the tv to stay on. The issue I’m having now is that after 30 mins of picture perfect use the bottom of screen becomes fuzzy with a horizontal line. If I unplug the power cord from the tv for 30 seconds and retry, the picture is perfect for 30 mins. I’m wondering if the mainboard could be an issue as it warms up, or I need to try other pin combinations? I know I’lI have to spend more time on the ribbon pins but any suggestion is greatly appreciated. Thanks again!!

[@SOSfixElectronics]

i think you still have some more traces to cover, that is the only option for that screen

[@romeojhd3720]

@@SOSfixElectronics Thanks!!

[@sarimkhan9678]

The fault which is showed in this video how it will be removed and which components will be used for removing this fault

[@johnericksen3953]

Thank you

[@georgekefalas1925]

Dear friend what about if a similar Samsung power on showing everything ok on the screen, after 5” the display fade off showing some colored pixel,then the tv restart showing everything fine and afrer 5” fade away the screen…..like a loop

[@Liot69]

It worked for me one day, the next day my TV had no image again and restarted, any idea what it could be please?

[@ericmontanez7276]

ALL SAMSUNG PRODUCT BEING TV, FRIDGE, MICROWAVES THEY ALL LAST FOR A PERIOD OF TIME AND DIE!! Then when you call customers service they arrive at your door to tell you there’s nothing they can do!! I STOPPED BUYING ANYTHING SAMSUNG!

[@heykid542]

So what’s the proper way to fix this? Without tape

[@SOSfixElectronics]

replace the screen

[@АтырауМакат-у1ы]

Где есть пятно там греется стекло??? У меня такая же проблема

[@jonathansnow5198]

What is the process of covering the traces for? Is it to see what data line is causing the fault?

[@SOSfixElectronics]

YES. and to repair it. after covering the bad traces the tv will work fine

[@jonathansnow5198]

@@SOSfixElectronics is there any way to fix those traces? What is wrong with them?

[@SOSfixElectronics]

@@jonathansnow5198 no there is no way to fix the tiny traces inside the screen. They shorted

[@jonathansnow5198]

@@SOSfixElectronics this is the first time I'm seeing something like this! Great fix!