Soundigital EVOX 400.4 and 800.1 little amps BIG power Car Stereo Lab

[@ajkamkel]

Your wiring layouts are a piece of art, keep dropping all the dope content

[@ericb4608]

I can't wait for Bid D to test these!

[@alphaomega8373]

They will do what they say and more. Still dont trust them. Longevity is my issue.

[@iiNgONYaMa]

Yea boiii

[@iLikeSampo]

With 40 amps seems like it’ll do no more than 600

[@angelvip2474]

They do rated. Period. Tested and true. Period. This Dyno , that Dyno makes tested power. Period. Quality install, properly tuned they will last. Period. Idiots need not apply. Period

[@ericperry72]

@@alphaomega8373 these are tried and true in the powersport world. Like pretty much the standard for 75% of motorcycle sound system so if they can hold up to vibrations and extreme temperatures from the environment then in a car reliability is a non issue.

[@TheAdam61904]

Your wiring is so clean I wish mine could look this good! You guys are amazing hopefully you guys job is one of those “you never really work when you love what your doing” great job keep it up!

[@elprimo2751]

Finally Brazilian amps! These amps are monsters! Im currently running a soundigital 3000.1 and a 5000.1 and they are amazing.

[@denniswalker1640]

Sweet guy nice to hear your opinions,I just got a sounddigital!!

[@jasminedeng]

It's really a clear and amazing nice introduction video!💯

[@Bassotronics]

These have to be the best compact amplifiers on the market, especially for all the advanced features.

[@kelaro75]

Just got the new Evox2 1000.1 to go along with the Evox 400.4. These are small but put out a lot of power. 👍🏿

[@mauriciofarias6493]

👏🏼👏🏼👏🏼 You guys Rock! Thanks, Dean and Mr Lopez! 🤜🏼🤛🏼

[@tireart9207]

These are awesome little amps! Perfect size for my Honda Acty!

[@texasgreenlawn3807]

Love your honest opinion

[@curtisck813]

Great video!! I have the EVOX 800.4 And the first thing I noticed after 30 minutes of jamming was how hot it got..I thought my gain was too high but I guess that's just how these amps were designed.

[@yan5362]

Planning to get 1 also. Either 800.4 or 1200.4 but are they good for loud music?? Is it normal to get hot?? Well, heard some bad reviews on those amps.

[@PkwyDrive13]

Nobody designs an amp to get hot 😂

[@myoneblackfriend3151]

Thank you so very much for creating and sharing this.

[@majorwilkesjr.5827]

The fit and finish of the wires is what I need for any and every amp application. These amps are what I need when I am ready to have power and clarity . Thanks for the video.

[@Envywhatitdo]

I will be adding these to my motorcycle project 1200.4 n 800.1 evox

[@geolemon]

The absolute best part of this video is the art of clean wiring. Excellent as always, Dean! I am curious if you can give any honest feedback as to the SQ capability of these? Are they pretty midgrade in SQ at least?

[@TheHyvoltage]

great vid guys.... clean wires to the max... 🇹🇹🇹🇹🇹🇹...love from trini

[@flavorgainz7205]

i got a 800.4 sound digital evox is amaxing. i have 3 ds18 neo pro 6.5 pairs and 3 pro bullet ds18...

[@anthonymoore6250]

Is these amps really loud and sound good. I be using stetsom amplifier

[@yan5362]

Are they awesome? Need to power 4 deaf bonce speaker of 180 watt each. The 800. 4 gives around 140 watt rms per channel and will surely underpower those speakers. What are ur views on that Amp, do they make speakers screams??

[@Tenzen.]

Cute amps haha. Let us know how it is on SQ side after you run it awhile. Get Fernando some Focal Utopia M's - for science.

[@tomarnold6550]

I have (4) of the 1st Gen Evo amps on my motorcycles. They have been great. These new versions have a bunch of issues. They were either released in a rush or the company knew and still sold them this way. The motorcycle audio community is in an uproar over this. Be cautious if you plan on buying one of the new EvoX models.

[@jonanderson4474]

I just got the sundown sfb1000d. Haven't installed it yet but I've heard good things.

[@kjcl90]

Can you link me to some threads that discuss the problems with the new EVOX?

[@toyhaulerobs5839]

Do not use a 40 amp fuse on the 800.1. I sent back six of these due to that. We started using an 80 amp fuse and they don’t come back in to the bay. Our rep had one in his truck using an 80 amp fuse without issues. These would show up the next day when using a 40 amp fuse. So I highly suggest going more on fuse rating. Always go for max amp rating for fusing. Just my 2 cents.

[@ronniesearcy8712]

7/17/hello is it true you're saying 80 amp fuse instead of the 40 I'm running the hertz 200 l on this amplifier and what is the problem with that thank you

[@bobyjoe493]

Love y’all reviews/unboxing videos thanx for the info

[@mehsan2232]

Big D where are you dyno test these amps

[@richalvarez9807]

Good Morning, you guys are amazing settong this system. Have you guys work on Harley davidson?

[@jtr82369]

Those are impressive specs for that size

[@ajmann07]

Great Job guys like always.

[@stevensholett4821]

Love the show guys Could you say what 8in sub is in the system and do you like these amps better than the audio control Thanks love the show

[@FernandoLopez-kf2qf]

Steven Sholett it’s a Rockford 8” p2

[@texasgreenlawn3807]

Looks amazing. However, I am ocd and my wires have to be hidden

[@jessielees]

you guys still happy with these amps?

[@ericperry72]

Need these for my 🏍

[@mikegray9428]

Price is about $240 for 4 channel and $450 for Mono, Google is hard

[@savikabudsuke8213]

Too much.

[@genecase9464]

I just bought the 400.4 for $79. Amazon. $240? Too much.

[@Turtle2117x]

Hello, Can you make please a Video for the 600.4 Evo 5? Im not Sure buying 400.4 or 600.4. Thanks

[@ricardomolina4605]

Big D or HiFi Vega please test these amplifiers?

[@loloent]

Hi Dean & Fernando can you guys do a video on how to set up the skar skv2-2500.1 I just updated to this amp & 2 evl- 10s with a new custom box can't wait for you guy's to here it but I need to set this amp

[@stopitskiiiuuup4006]

I’m going to try one of these on my bike

[@todizzle666]

When using the amplifiers like the 4 channel pretty much all of them put out double the rms power at a 2ohm load why would we not go with 2 ohm speakers as long as the speakers can handle the wattage the amplifiers puts out? Another question for basically five star car stereo I've seen many places around me when running new speakers and an amplifier to the interior speakers do you run a new run to all four speakers because I seen a professional install run new wires just up to the wire harness that is behind the radio I know in some cases its hard to run through the doors through the wire seal in between the door n the car but is this something commonly done? obviously running from the am to the back speakers when in the rear deck lid you probably run new wires but is this something you guys do? And what about if you are running from an amplifier to a factory amplifier you cannot run an amp through another amp thanks for yourself input

[@duo315]

be on the lookout for 2 presents! they're shipping separately

[@chrisphilhower6029]

Hello. Just started watching your videos. I have a Hyundai Kona. What do you think of the Sony GS4 amp for the door speakers? I have Kicker KS series installed. The older models with the huge crossover. Thank you

[@mombizzle]

👌🏼 Great video.

[@hughrs]

Are these still preforming ok? I want to use the 400 in my 2021 Can-Am commander. I was going to use 2 channels for the full range speakers and bridge 3 and 4 for a sub woofer....... what do you thing? Or do you have a link to such a setup

[@kelaro75]

My 400.4 evox has 8 speaker outputs instead of the 6 on this one. Also it only gets warm to the touch after a long drive (9hrs).

[@fast97z24]

If they can squeeze that much power in such a compact size, how the hell do modern head units STILL only produce around 20 watts rms per channel, even without the cd player portion?

[@Mark11n23]

question is when AMPLIFIER gets overheat but how long it last? because I am looking for low overheat that can last longer

[@alsaint7944]

Is it better to use the high-level inputs for higher voltage or do you recommend using the rca inputs. From a Kenwood excelon head unit?

[@ericb9912]

So glad I subscribed. I got emergency questions. I'm looking for a 5 channel amp. What do you recommend and which would you recommend between. Diamond Audio and Arc audio 5 channel amps. I know the watts are different but I'm looking at roughly 5 brands Audison, Diamond Audio, JL Audio, Arc, Fosgate , Audio Frog and Focal. Price difference on all of them but I'm leaning towards Diamond Audio. Is it worth the price?

[@DayV914]

Why not just get a dedicated amp for mids and highs and a dedicated amp for your lows (bass)?

[@yan5362]

Is it OK to bridge 2 ports and hook 2 tweeters on 1 port and run at 2 ohm load??

[@wethedark1]

Question I have an 800.4 evox and I have 4 80RMS JL 6.5 running of the evo and even with the gain less then halfway output she gets very hot, now you stated that they get hot and are designed to get hot, my question,, is it safe and will she get so hot that she will go up in flames?? I don’t want my Harley going up in flames😳, and all the wiring on the bike and amp are to specs, so even if the amp gets really hot it should be safe?? Could you please Advice,,Thank you🙏

[@richalvarez9807]

I have a 2018 CVO Street Glide, I just installed a SD evox 800.4 for my upper/lower fairing diamond audio mp654, SD evox 800.4 running my MS8NEO diamond audio on my lids and a SD evox 2400.4 running my DS18 PSW10.2D subs on the sealed and ported saddle bags, but having trouble setting the HKI mini dsp. any advice will help.

[@shawnmiller834]

Question: does it matter that you crossed the power wire over the rca’s? Should I worry about rca’s picking up engine noise? I’m installing these on a motorcycle

[@tatialo37]

Did you put these in the Fernando love machine?

[@seansnyder-e2v]

Im going with the sd 1600.1 1 ohm evo5 and im going to run it at 4 ohms.

[@dennycote6339]

Amazing video!!!

[@gonzoe123]

With a shared positive and negative, wouldn't that put the speakers out of phase?

[@varunsingh5330]

Both of you 5 star dear

[@ganeshnarayan5505]

Dean first of all i watch all your videos very nice videos but you never talk about how much do they cost, So how much are these amps.

[@jonanderson4474]

It's not stated most of the time because this video is up sometimes for years before a random finds it and saying a price will bring out trolls or people who don't know it's an old video. Plus after a while availability may be hard or non existent. So a price on the video would cause confusion and unwanted hatred. I have heard of a website called google. They're usually up to date with knowledge.

[@ganeshnarayan5505]

@@jonanderson4474 thanks for the reply.

[@jonanderson4474]

For sure hey. I've asked on a previous video and he said what I said so. I figured save hime and you some time. I do think there is a comment that does say the prices as of now. Have a good day.

[@geneznicolas9884]

Estás potencias brasileras andan muy bien..

[@guestguest]

I own the 4 channel. When I turn my car off and open my car door everything immediately shuts off except this amp. The power light stays on a whole extra 150 secs. Is that normal?

[@marvinrogers876]

Think these would be a good fit for a boat system?

[@CodySorrell13]

Your microphone has static! Just a heads up. Love watching the channel

[@nilsebert6231]

How does it work, 2 Channels and only 3 Terminals. How can 1 Terminal be + and - at the same time?

[@RodimusPrime]

Where can i get those abs plastic sheets and order to a specific measurement?

[@jonanderson4474]

Ask Steve Meade.

[@jesuszuniga1257]

Hi would the 800.4 evox2 have enough power to power 4 deaf bonce speakers at 180 rms each

[@sermac3246]

👍

[@RanGer-498]

On the 400.4 or 800 4 evox can you run the front 2 channels at 2 ohms and the rear 2 channels at 4ohms with these amps? Thanks

[@rheadog9546]

I like your attention to detail. This is splitting hairs to some but My 1 complaint on your channel is that you guys do a great job keeping things neat and clean but to often, have no problem adding a connection like a speaker tap/plug as if it has no effect on the final product. ("resistance is futile" on a speaker line, it is critical in sound. Also with vibration in a car, less connections are always better.) Any installer should avoid more connections/connectors, mostly but not limited to speaker wires whenever possible. Also it's nice to keep factory speaker wires, but running new wire is usually a higher quality option. (this has always been the case but obviously not always a necessity.) ferrules look awesome but are usually bad quality and don't matter if your system is cheap to begin with. But should never be used on a high end install. Maybe (up for debate) tinning your speaker wires with a high quality solder is a similar result without really adding another connector? I'm not saying anyone is doing anything terrible wrong here. Just adding food for thought in any installers mindset. Other than that, great job guys. I love your info. It is so awesome your doing this for us to see. I have always enjoyed seeing how others do it and different ideas. I hope it is paying off for you guys.

[@RanGer-498]

Can this amp be mounted upside-down ? Asking as i have seen this done but it seems wrong.

[@malkowitch]

Hi @FiveStarCarStereoIncClearwater I got a quick question. I have an amplifier in a trunk running 8 inch woofers in the doors of my 05 Mustang. I want to drive the door upper and rear speakers (currently 5x7). The problem is passing another wire trough the doors would be a nightmare cause of this factory wires flange. Can a factory wire handle about 60-70 RMS? I would place a small 4 channel amp behind the radio or near the kick panel (like the Soundigital 400.4 or the Alpine KTP-445U) and pass the output back to factory harness. Wouldn't a D-class speaker be a problem for mid and high speakers? Or is the entire idea a bad solution.

[@FiveStarCarStereoInc]

That is a fine idea and will work great. Either amp will do the job

[@g7xp3z]

can i run 4 tweeters and 4 speakers into the 800

[@flatdog691]

Wonder how fast they will blow

[@elmerhawk5740]

Why does mine keep Going into protection and every thing is hooked up correctly

[@jonathancardenas7564]

Is there any aftermarket systems for a 2020 Ford ranger 4dr

[@rideordivekerry4830]

How is the sound quality on these amps

[@nickeminoski2205]

So I was looking into these for my street glide, but ended up with 2 focal 6.900 instead. Im going for decently loud but more on the sound quality side of things. So I have a question for you guys...... focal fdp 6.900 manual says that each input has a peak limiter to prevent clipping. Are you familiar with this? And what exactly does that mean? If the amp sees any kind of clipping it rolls back the input signal? I cant get a straight answer on exactly what it does. Any help would be great if you familiar with it. Love the channel! Tons of great info

[@TheVaph]

How about the distortion?

[@everetthawp7761]

Do any fellow bassheads in the comments have any amp/subs just laying around that they can let go of for cheap? I have very little money due to my living situation but I can always try to hustle something up!.anything would work at this point because I only have a factory radio in my car/house....tanks in advance and God bless

[@unclebuck6814ful]

Where do i buy these ?

[@ebastin7]

Very similar too the two optisound amps by Vibe.

[@HKIUSA]

Has no similarity at all. Totaly different powerxsize ratio.

[@ebastin7]

The powebox 65.4 is 65w rms x4 vs 66w rms x4 and the amp is about the size of a dollar bill, the 400.1M is slightly smaller and isn't really in the same league as the sound digital mono, but can run it at 1, 2 and 4 ohms. Granted these sound digital amps are a more advanced/elagant option with the clip indicator and much nicer look. Are they available in the uk market?

[@tatialo37]

Nevermind.

[@TheVaph]

How about distortion?

[@Benwadding78]

Anyone answer a question for me? I have 2 amplifiers and am I ok to run them to two seperate ground points in the car as there is no ground point close enough to join them both to the same point. There just seems to be mixed reviews online. Many thanks

[@galuple]

Yes that’s absolutely not a problem. It used to be better to have ground wires be as short as possible, so installers wouldn’t bother using a shared ground point for multiple amps.

[@matthewroot3939]

WOW,was interested in these until I saw the price.

[@stopitskiiiuuup4006]

😂😂😂😂 yeah their worth the price tho bro! Quality over everything!

[@michaelculhane7227]

clean power ftw

[@flatdog691]

What happened to the Mustang part 3?

[@FiveStarCarStereoInc]

Tomorrow

[@yan5362]

Banda or soundigital?? Which is better??

[@KusaharaTV]

Soundigital Less battery more power

[@sem-nick-official]

Powerus

[@chrisphilhower6029]

Battery is spelled with one T??

[@mr.smokesinaloa6454]

Can use it for sq?

[@FiveStarCarStereoInc]

They have new GAN amps that are more suited for that.

[@dtmfool789]

No price?

[@FiveStarCarStereoInc]

Never

[@juancarloscienfuegos7450]

How is the 4O0 wats rms sound digital and what is the cost

[@kelaro75]

Really nice for it's size ,I have the 400.4. These models are discontinued but still available on some sites. They are now renamed 400.1 evox2 , no 800.1 but they now have 1000.1

[@elie2484]

Sound digital is trash I had 1600.1 literal just stopped working today no smoke went into protect check everything problem is the amp I'm all set

[@abdomination]

nice install but I'm definitely not a fan of the zip ties and zip ties look..

[@thatoff-roaddude9515]

Can I have your creation 😁🤙pleeeeease.

[@carolyngiuffre7623]

So marketing bs. LOL I'm sure everyone company will say about the same as most of those features

[@bade-bike1930]

And the moral of the story!? Let the music play.

[@rubenrivera8585]

I better kepp my alpine