Sound Digital 800 watt amps different generations explained

[@db122179]

Every time I watch one of your videos I feel like I don’t know anything about car audio. Lol thanks for the knowledge Carlos, keep up the great work.

[@tourinojacks5844]

Thank you for this video. I learned a lot about sound digital and you're a great explanation of its pros and cons. Because of you, I will go ahead and give it a try. I'm purchasing it right now. 💪💯

[@BIGZACH23]

love to see a video on how you go about tuning the 800.4 for HPF without dsp. Thanks for the great content!

[@NVSAUDIO]

Zach Milt you can’t really “tune” without a dsp . I will Try to Make a video on adjusting gains and using the basic radio eq to get you Close

[@emmanuelgarcia2552]

I also want to thank you for sharing your knowledge and experience what are community

[@53mobay]

Can you do a explanation of the 1200.4 Evo X

[@bigboy-ky3mx]

bro, I'm definitely sending my bike to you when riding season over. I got to get my rear fairings situated then the music.

[@jeanalix5736]

Great video. I am getting ready to set up a road glide 2020. I know I am going components up top. And adding ferrying lowers with 6.5’s in them. Could you do a video explaining the various dsp’s you use? Thank you for the great content.

[@darrenrigby5687]

Thanks man. I have a 400.4 that I love, but just last weekend one of the channels blew but for all my amateur experience I can't see a fuse to swap out and am not getting far with a continuity meter. I left my set unattended and didn't realise that somebody had turned the gain to maximum. It didn't help that on that day one of the negative connections back to amp from mids and top box was loose. I wonder if you'd have any advice? What's the most likely component to be looking at to replace?

[@Frito505]

So there is no need to adjust the amp when using a dsp?

[@NVSAUDIO]

Set the amp gains with scope then the rest is done in the DSP. You don’t touch the amp at all after that.

[@Frito505]

@@NVSAUDIO so another quick question. Would I set amp at full range or high pass?

[@danielsmith626]

So will the sound digital 800.1 evox2 fit 24 road glide. What dsp would I need

[@NVSAUDIO]

@@danielsmith626 email me [e-mail]

[@jasonsheeler9553]

What’s the difference if you buy it here or in brazil other than price difference ??

[@NVSAUDIO]

The Brazilian version are a lot lower quality than the American market version. The Brazilian 1200.4 puts out as much power as the American 800.4 people think they’re saving money but they’re not and we have a lot of noise issues with the Brazilian version.

[@jasonsheeler9553]

I got a 2007 street glide I got 2 Hertz audio 6.5 going in the batwing then I got two Rockford Fosgate 6.5 going in lower leg fairing and a set of Rockford Fosgate 6 x 9 going in the saddlebag lids nothing crazy what would you suggest amp wise

[@jasonsheeler9553]

I am new I don’t really know anything not really going for hard-core competition just trying to hear the music pretty decent while I’m riding a buddy of mine out here in Buffalo put me onto you figured you could help me out

[@NVSAUDIO]

@@jasonsheeler9553 email me if you have any questions Nvs [e-mail]

[@Mario77920]

On the 2014 SG special will 2 evo2 fit in fairing with stock radios

[@NVSAUDIO]

Yes

[@bigboy-ky3mx]

what speakers do you recommend for the front fairings for a 20 road glide to run with the factory radio? looking to get some speakers this week

[@NVSAUDIO]

big boy mmats pa 601 Cx or the new hertz Neo coax

[@quete1978]

​@NVSAUDIO i have 2 6.5 and 2 tweets in frint and 2 6.5 in the back should i use the 800.4 this is for a audi q5

[@stevematthews7272]

What amp should I use on 4 600 watt 6x9s and 2 280 watt tweeters?

[@NVSAUDIO]

@@stevematthews7272 sound digital 1200.4 4 ohm Or Cicada flx 1400 Or euphoria exm 900.4

[@dionne681]

Question. I believe my Rockford TMS amp @100watts is not pushing my Diamond Audio 6x9 coaxsub and 6.5 full range fairing speakers to full potential. Can i adjust the amp to 2ohms to produce more power or will that cause a problem?

[@NVSAUDIO]

It is definitely not The diamonds can handle 3 times that power No way to do that with 4 - 4 ohm speakers You will Need to Upgrade to a bigger amp

[@dionne681]

@@NVSAUDIO lemme guess... Sound Digital EvoX 800.4

[@emmanuelgarcia2552]

I would like to know if you can help me out and buying a amp for my bike I'm trying to get out of my speakers at least 800 watts RMS or more but I just don't know what is the best amp to fit in my bike with no space front Rhino face and also a capacity battery

[@ray201029]

Here in Trinidad and Tobago we have the 800.4 evo 4.0 it looks similar to the 800.4 evo x what's the difference with that one as well ?

[@NVSAUDIO]

We don’t have access to that here in the states

[@ladams10]

I have the newest series of the 800watt amp . I haven’t had It long , had to send It back already . I got It back today and put It on , it’s now running hot .

[@NVSAUDIO]

I’m pretty sure it’s installed wrong . We have installed hundreds of these amps with no issues . You’ve installed 2 and had a problem with both ?? How many speakers ? Is the amp bridged? What ohms are the speakers ? What kind of power wire are you running? ( brand and gauge size )

[@ladams10]

@@NVSAUDIO i have 4 6x9 speakers installed on It . They wires are not bridged. I didn’t install, i had a guy who install audio do It .

[@fredwilson3965]

I have a 2012 road glide cvo. Currently running 2 Diamond Audio MSpro65 in lowers, 2 Digital Design 5 1/4 and 2 horn tweeters in fairing with a 800.4 sound digital amp. I want to add a 10in midbass in my bags and would love a anp and speaker recommendation. None of the following is actually on my bike but I currently have 2 DD VOw8s, 2 Diamond Audio MS PRO 8s, and 2 PRV 8s but they're all midrange and I want midbass. Any help would be appreciated.

[@averyb60]

I have 2010 street glide I had the old millie pro hertz. I'm looking for new set up and what can I run to get the same sounds or better

[@rpiii3755]

Will the 800.4 run fairing and saddle bag speaker's? Not looking to win any competition just looking for better sound than factory? Best videos out there!

[@NVSAUDIO]

Yes 800.4 will run 4 speakers beautifully

[@ericrivera4516]

What is your recommendation on a 2012 Road Glide for an upgrade using original Harley Radio to add an amp (preferably 800.4) with 2 front speakers that would fit fairing only, and a second option adding 2 additional speakers on the bag lids. I would try to do it myself if necessary. Pleae advice

[@adamdavis729]

I have the same question, except mine is an 2012 Ultra. Want to keep the stock stereo for intercom.

[@joewilliams8508]

Hey Carlos I want to run set of tweeters 4 6.5 a set of 6x9 and a set of 10s all mmats do I need to run 2 evo x 800.4, how should I wire it also will use a dsp

[@MrZX1409]

Question, I want to run an SD800.4S 2ohm to power the horns only on 1 x set of Beyma Pro8cxnd and 2 x set's of Beyma Pro6cxnd I will be using a DSR1 and I have 2 x SD1600.1 2ohm amps for the main driver. I want to be able to fade front to back with my horns . How would I wire this up to accomplish this?

[@Misty3133]

What are your thoughts on the Arc Audio 600X4 ?

[@emmanuelgarcia2552]

Oh sorry I'm installing the Euphoria 800 watts spiker for now a pioneer 300w radio because my Rhino have does not have space for a two-stage radio

[@ronniesearcy8712]

hi CARLOS so will the 800.1 2ohm model be a good match for 4ohm hertz sv 200L woofers in bags thank you,

[@NVSAUDIO]

Yes, absolutely but the 1000.1 would be better and they cost the same

[@bobbyellison6259]

I have 4 ds 18 at 4 ohms rated at 250 a piece. And I also have one 12 inch 2 ohm kicker solar baric rated at 750 . What size amps would be good for these speakers?

[@1cebittentwiceshy]

I've got a 2000 Yamaha Road Star 1600, big v twin. I've got 4 speakers in the fairing and 2 6 x 9's in the rear bags. Want to run 2- EVOX 800.4, one to run the fronts one to do the rear. Do I need to but in a fuse block and what's the smallest wire to run to the head unit where the amps will be located? Love the vids!!! Big help to all of us! Thanks for everything you do for guys on bikes!!

[@eddiesurf746]

By any chance do you know anyone besides SD that fixes these amps. I just need to know where two wires go to on my 3000.1 evox2

[@yan5362]

have to power 4 x 180 watt speaker(deaf bonce) and came accross the soundigital 1200.4 amp. do SD amp provide high power and quality music? are they solid?

[@antoniomccoy9451]

Digital sound vs diamond amps???

[@NVSAUDIO]

Both awesome amps I love the quality of the diamond amps but they are too big and I don’t like cutting up the customer’s bike to make them fit . The sound digital amps are smaller and more powerful. When the sound digital 800.4 was the same size as the diamond micro 4 I would use either one. Now that the new evox is so small we use them exclusively

[@antoniomccoy9451]

@@NVSAUDIO thanks bro! I thank I'm going with the sound digital amps with the diamond audio mp series speakers

[@ktinsley77]

I have 800.4 2 ohm currently running my 4 horns on channels 1 and 2 and my 6.5 hertz spl on channels 3 and 4. Can I bridge the 6.5 and not harm the amp? I have dsr1 also

[@ronnieparamore5346]

If your two hertz spl 6.5s are 4 ohm ,you can bridge them on channels 3 and 4 and not have any issues . It will result in a 2 ohm load . That amp is 2ohm stable in bridge mode , if you indeed have the two ohm version of the sd800.4 evo s .

[@ktinsley77]

Yes they are 4 ohm speakers. Thanks for the advice.

[@ktinsley77]

Just wanted to make it wouldnt over load the amp with 4 horns on two channels not bridged and the 6.5 bridged on the other two channels

[@NVSAUDIO]

Kenneth tinsley Yes you can bridge the amp and Almost double the power you are running to your 6.5 s. This will not stress the amp at all . You will lose your left to right fader ( bridging the amp makes the bridged channel mono and takes audio input from only 1 of the 2 rca)

[@yellow07zo6]

Hello. Can I run four 4 ohm 6-1/2 speakers wired series/parallel with the 800.1 2 ohm?

[@NVSAUDIO]

Jermane Gartrell series parallel will Net you 4 ohms at the end . You will Need to use a 800.1 4 ohm . The problem is that the 800.1 is designed to run 500 hertz and down ( subwoofers and mid bass drivers ) 6.5s are mids The 800.4 2 ohm would be a better solution with 2 - 4 ohm 6.5 on each bridged channel will give you the most power to your 6.5s ( 200 watts each )

[@leacoreywashington3125]

I want to use a sound audio amp on my 2019 road glide. I have two 5 and quarter up top, With four 6x9 in the lids. Which amp do you suggest. The 6x9s are 5 ways TS-A6990F 700w. L

[@TheDolkNess]

Hey Carlos...just stumbled upon the 800.4 Evo 4.0 - besides the built in crossover, is there any difference internally?

[@johnl9857]

Thank you.. very helpful

[@ramontorres7550]

Carlos I'm running a 1200.4 4ohm to a set of 6x9 yellow basket coaxial and a set of 8 inch yellow basket coaxial will this amp work for this set up ? Also can I run 16 gauge ofc speaker wire .I'm running 4 gauge to amp to a block to 8 gauge to amp is that correct lmk please I will definitely appreciate you ray

[@cbobe001]

Can you explain how to adjust the 800.4 evox no dsp but i have a biketronics leveler 4 hertz neo 165, and 1 pair of tweeters. Mine sound a bit to flat i want to get some base to it.

[@NVSAUDIO]

Carlos Bobe I have a video coming up soon that will help you with this .

[@Dman8822S]

Hey, what sound digital amp should i get if I have 2 6x9 diamond audio ms69cx 4ohm speakers in my faring?

[@drrckhamilton]

Do these little amps actually put out good power. Specifically the subwoofer amp. This is for a small car and a single 750 watt Sundown Audio subwoofer.

[@shill3541]

Carlos, I am going to be running 2, 6.5 speakers and 2 tweeters up front on my street glide and 4 , 6x9 in the lids and 2, 8s in the bag. About a year ago I bought the SD evo 800.4D 4om, and was thinking of getting the 400.4s any suggestions on the setup?

[@NVSAUDIO]

I would run 2 800.4 The first one will run Tweeter and 6.5 on channel one Tweeter and 6.5 on channel two 2 6x9 on channel 3 2 6x9 on channel 4 The second 800.4 bridged to run the 2 8s

[@shill3541]

@@NVSAUDIO Thanks for responding, I am a big fan of your technical expertise. So I already have the 800.4D, and from what you are saying I will need one more which will be the newer model since they discontinued the one I have, do you sell sounddigital amps? And how can I purchase it from you if you do?

[@travisgray3331]

Great video...do you have any 800.4 EVOXs for sale?

[@NVSAUDIO]

Yes I have plenty in stock

[@travisgray3331]

Do you have a contact number?

[@NVSAUDIO]

@@travisgray3331 908-527-6772

[@travisgray3331]

@@NVSAUDIO thank you sir

[@MrJoey478]

Thanks for uploading the #. I'm from Dade County, Miami, FL. Been watching your videos for a while now. I don't have a Bike, but I do own 4 SounDigital EVO-X amps, 1 12k, 1 1200.4, 1 800.4 & 1 400.4. I haven't installed any amps in my Yukon yet, but this year I sure am. I'm about to buy another SD amp soon.

[@jeromem2369]

Hi. I Need yo buy an Sound Digital 2400.4. Do you have an site?

[@kjcl90]

Can I use the 800.1 to power two JL 12tw3 subs? Or would you recommend something else?

[@NVSAUDIO]

1200.1

[@jackferry3932]

That's all jumbo to me Hertz 6bye9 and 6/5 front what one should I use

[@michaels.cannon461]

I have decided that I’m going to let these guys work on my Street Glide

[@melvinswade8659]

Greetings. Were can I purchase these amps? I have a 05 kawasaki nomad need to get the correct amps. Please thank u I just subscribed

[@NVSAUDIO]

Melvin Swade where you looking for the Evo x 800.4 ?

[@melvinswade8659]

@@NVSAUDIO Amazon Can give the part numbers for the 2ohm or the 4ohm. Or give me your website so I purchase from u. I have 2 8inch subs 2 6x9 2 6.5 I'm a do it urself kind of guy.

[@NVSAUDIO]

Melvin Swade email me . [e-mail] and I can ship you whatever you need .

[@jeremyleonguerrero9492]

Hey guys I know nothing! I was recommended to run 4 hertz SV165 and 2 ST 25. What amp would folk recommend for a 05 Roadglide. Thanks for the good videos.

[@NVSAUDIO]

Jeremy LeonGuerrero I like that recommendation 👍🏽 Add a dsr1 dsp And a sound digital evox 800.4 or evox 1200.4

[@jeremyleonguerrero9492]

NVSAUDIO Thank you ! Your advise is really appreciated!

[@Kevin-leatherneck]

Hey ya'll- what do you guys think? Sound digital 800v4 vs Cerwin Vega B55 amp to power up 4 speakers (diamond audio on a road Glide)????

[@richdonahoo8769]

Rockford 800 watts or sounds digital?

[@bassboyful]

nice video bro

[@richdonahoo8769]

2021 Street glide special

[@romesyoutubechannel5356]

Good stuff

[@frederickhodgens5392]

What soundigital should I use on 2 8inch d b drive 4Ω subs 600 watts 1200 watts max

[@brianirons3958]

The Evos are much more reliable the newer ones I'm not a fan of at all too many issues

[@onpointdetailingbrandon6119]

Those amps are crap 😳

[@Heavy69Metal]

How about this UcD based technology being used in amps? Wonder if they will ever go to it?

[@Heavy69Metal]

Wanted to run 8 8” speakers needing 250-350 RMS which 2400 would you need?

[@Heavy69Metal]

800.1 Hertz SV 200 L perfect match