SounDigital SD 3000.1D EVO II Amp Dyno Test

[@wal]

Get your OldSchoolStereo.com T-Shirts here: teespring.com/oldschoolstereo My Favorite Screwdriver Kit: amzn.to/2HIc0kr Search for SounDigital amps - goo.gl/ngEjQs Taramps MD1800.1D video: kzbin.info/www/bejne/fZvTo3V-qp2prpY Kicker PX200.1 Video - kzbin.info/www/bejne/d6W0nKiLfN5seNE Brazilian Amps Playlist - kzbin.info/aero/PLu98-M_EowHNl3vHrv51O0TZzS9s0Mlhb Send me a few bucks if you want to support: paypal.me/BigDWiz Test Your Own Amps! SMD / D'Amore Engineering AMM-1: Amazon - amzn.to/2u2EgKV WCCarAudio - goo.gl/CVCgU3

[@Bryant_91]

Williston Audio Labs can you check out the stetsom eq 3k

[@Bryant_91]

The 2ohm version

[@kevinrajh324]

Orion xtr 2500.1 have more power than this amp?

[@doctorhoward642]

Hey Mr Derek can you test the Rockville DB13 monoblock amp. Also is it possible to play frequencies lower than what the low pass filter on a monoblock amp can be set to? Like can 40hz or 35hz be played and heard through subs if the LPF can only go as low as 50hz? A lot of monoblock amps have that limit like this one I would like for you to test.

[@Bassotronics]

Never seen an amplifier mention on the bass section 5Hz and 10Hz. Now that’s MY kinda bass right there! 😀

[@carpetcleaningprofessor]

I have been fascinated with Brazilian amps so little so much power so much awesome thanks once a big in Big D keep it up

[@wal]

👌😬👍

[@07zx14White]

Definitely interested in this brand. Many things have been said about these Brazilian amps, mostly good and some negative but in our internet world even the most unqualified people have opinions. Seems to me they're doing well. Thanks for showing us Derek.

[@wal]

Thanks for watching and commenting 🤙

[@07zx14White]

BigDWiz I hope that didn't come out wrong Wiz. We know you're qualified my friend.

[@gmodlover7325]

Man I appreciate your videos so much bro, keep em coming!

[@wal]

Thanks for watching and commenting!

[@MyHairyChin]

I own the 5k of this amp, its a beast! Its such a good amp for size and amount of rms power

[@chehystpewpur4754]

how good is it? and what have you owned before that to compare it to? i got a taramps last year to replace an incriminator amp that clapped out. it was pretty decent for a good price. i got the 5k soundigital on a good deal from a friend today but idk what i want to do with it yet.

[@MyHairyChin]

@@chehystpewpur4754 it a great amp, but! It popped a mosfet couple months ago... i ended up buying the taramps smart 5 bass, its a way better amp on my 18s runs ice cold compared to my old evo 5k... has alot more stable rms and huge rms numbers

[@PreslySmith]

How do you set your gains? I just got the 5k too

[@MyHairyChin]

@@PreslySmith theres lots of good info on here how to set gains, also google is your friend

[@RangerOutlaw]

These videos never get old!! 🔊🎚

[@wal]

Nor do comments like this 😬

[@catch22frubert]

Nice Video D. I'll never understand why the Brazilian companies refuse to use 1/0 inputs on these 3k and 4k amps.

[@wal]

Great question, I’d like to know as well...SounDigital??

[@catch22frubert]

It completely baffles me as to why they cheap out on the most important connection on the amp. It's the most obvious weak link I've ever seen, and nobody bothers to fix it. You think they would with all the blown power supplies they see.

[@hansen42001]

The beast is back with another video thanks! :)

[@wal]

👌😬👍

[@StrangeDuck]

appreciate all the money and time you put into these videos. Thanks!

[@wal]

I appreciate you guys watching, commenting and sharing my content 👌

[@MrJessesagearhead]

Big D WIZ.....you da man. Shinin light in the dark corners of boxes on the daily. Thanx

[@wal]

👌😬👍

[@Smoothe055]

Awesome video man. Keep up the stellar work as always. Eagerly awaiting the Orion 5000.1d and Rockford T1500bdcp videos!

[@wal]

Sorry to keep you waiting, I’ll get to them as soon as possible. Thanks for watching and commenting 👌

[@danielmoraes9637]

thanks for the test, i have this amp, it survived after a short circuit in the output in my car like a champion, for the high frequencys it not are good, I continue with my class ab for the Twitter's.

[@galegretti]

Tweeters.....

[@1-Six-dee]

I think o have been sub'd since 16k man hope u keep up. To a million so u can live the bass head dream

[@gg55584]

Amazing amp!, Been pushing this amp at .5 ohm for 5 months with No problems! Crazy power for an amp that size.

[@wal]

Crazy it has survived at 0.5 😱

[@gg55584]

BigDWiz haven't played it under 12v tho. These amps claim to have a good protection system from heat, shorting out and low impedance. Took a while to tune the box to get the right impedance. It would go into protection every time when the impedance dropped to low.. from what I've heard these amps are allmost impossible to break because of the protection system.

[@jH0wxd]

Thanks from Brazil

[@wal]

Hopefully the translation was okay?

[@izrael2321]

Another kick ass amp dyno .. luv it

[@wal]

Thanks brother 👌

[@babydro108]

can't wait for the w7 in car Amp test

[@caraudionation6897]

The part where the rca goes I believe u can only put in one jack. Not a pair. Because mine write input on one and output on the other

[@davislutchman8980]

SonzOfSylvia in the vid he connected both ends of the RCA into the amp. The store I bought it from told me not to do that. Use a splitter

[@solomonstuart6531]

Davis Lutchman it gives less power when you do that?

[@jeffneedstogivejakeaturnon1083]

I do enjoy that type of stuff! So I subscribed! Like three years ago! You had me sold at audio videos! I'm not sure why I'm yelling! BigD rocks!!!

[@wal]

Ha ha, that intro part is meant for those not subscribed...not intended to offend those who already are 😬..I’ll edit it to keep you guys from yelling at me, lol

[@bigbobbrown8635]

I wonder how the Audiopipe Apcle3000 would do on the dyno. Haven't found any dyno videos on many Audiopipe amps other than the 1500s

[@wal]

The 3000 has (2) 1500 boards inside, so just double the results you see

[@bigbobbrown8635]

That's between 2600 and 2900 watts

[@blakehunter6646]

Thanks for the awesome vid Big D!

[@RafaGmod]

Digital audio. Brazil is in the state of the art of power audio!!

[@PauloJDerrame]

im from brazil, price amplifier is R$ 690,00 (+ - $166), high price on ebay

[@wal]

Import/export taxes make it expensive in the US

[@djclabbe88]

Damn thats cheap! 500$ in Sweden (400 now with a discount). And thats still a good price for the amount of power here...

[@chrisblack4525]

Big D...my man! Rockin the Cutco box opener! Used to sell that stuff WAY back when. Still have my demo set. The amp was pretty cool too! Lmao. Keep them coming.

[@wal]

Oh man, my wife bought those knives like 20yrs ago and told me they cost $250 and I was like why spend that much? 20 years later she tells me they were 2x that much, but they are still sharp and worth every penny 😱

[@chrisblack4525]

They actually have a "lifetime" warranty, regardless of the ownership. You can always have them shipped to their headquarters in New York to have then replaced or sharpened for free. Good stuff.

[@brian78269]

Great video, was planning on getting this amplifier to run my midbass

[@HifiVega]

I’m not sure I’m sold on this amp for $599... good looking w7 btw! Looks professionally redone 😎... Great video as always!

[@wal]

I got it for quite a bit less, but yeah 6 hundy is a chunk of 💰

[@juicewatter]

I just bought a soundigital evo 2 8000.1, I cant wait to see what it can do.

[@wal]

Let us know what you think

[@tatert.v.9908]

On the 2 ohm test when it pulled 1835 i dud the Big D wiz yeah boooy!!

[@wal]

👌😬👍

[@BenjaminEsposti]

7:44 I got a kit like that from Amazon recently too, except it's got black plastic instead of orange. Nice little kit. Some people said they snapped the bits, but I have a feeling that they might have been applying too much torque to them - little screws don't need nearly as much torque as large bolts.

[@iceman45ification1]

Beast of an amp!! I'm not sure I'd pay that much for that amp though. I keep hearing bad stories of reliability issues with Brazilian amps. I think I'd rather go with the Orion XTR2500.1D on that case. Great video BigD!! 👌

[@wal]

Thanks brother and I'm also leery of an amp consuming so much current using such small power terminals. Using these amps with subs means big current and yeah, better be careful with them...

[@arthurkitchen9582]

Danny Caballero car fires make great KZbin videos!!

[@iceman45ification1]

Arthur kitchen 🤣🤣🤣

[@BenjaminEsposti]

Keep in mind though, that, especially with the bass, the current is drawn in peaks, so the average current is less. Then again, some people seem to like to play a single low tone continuously ... XD

[@iceman45ification1]

Benjamin Esposti True dat.

[@TurboJohn74]

Magic Mike tracks bring back some memories bro... south Dallas drops from the 90s

[@staytuned9320]

Seems like a good amp

[@wal]

Lotsa power for a little guy

[@karimyorkston843]

Why this there only 1 RCA for the input and output ?

[@francescogerotto8496]

Simple.... because is mono amp....

[@matk22]

Because a subwoofer is a mono speaker. It only requires one input.

[@Marcel_Da_SundownKing]

Would you still be able too connect 2 subs too this amp?

[@matk22]

@@Marcel_Da_SundownKing you can add as many subs as you like as long as the final impedence to the amp isn't lower that is rated stable ohm. Let say for example it's 1000w rms... 1 sub would get 1000w two would get 500w each. Three would. Get 333w each four would Get 250w and so on. So on this amp you could run 2 subs at 1.5k each.

[@Highqman1974]

Hi.....My name is Derrick.......I like BIG OL AMPS!!!!!!!!

[@wal]

And I cannot lie 😊

[@Xstreamaudio]

The Brazilian amps definitely put out power...I have owned a few of them for competition, but I have learned from first hand experience that they are alot more finicky and not even close to reliable as the Korean amps...

[@wal]

I can believe that. I believe they will get better over time

[@ralphcarrizales460]

good evening williston audio, have you ever done a test to a digital design test,especially on a d4.100 would like to know if it holds up to sound digital 400.1 power amp, looking for size difference and of corse price difference thx have a nice day

[@sMASHsound]

whats the temps like? the major problem with these from what ive seen around the net, is the high voltages used, and the temps cause them to over heat and burn up. so, it can make those numbers, but not for any duration... those peaks need to be intermittent. also, if the amps can tolerate 16v, can u run them at 16v and see how they perform? not to kill them, but to see if i set up an 16v system, if i can put them on the same 16v and still use them. i may not drive them to max, but still use them on 16v to avoid having a separate 14v system.

[@wal]

This one stayed cool during the entire test, but the fan was on the entire test and it was loud imo

[@johnebuckland]

Would you use one of these Brazilians? Also, very keen for dyno test of kicker kxa series. Also, the amps that have clipping indicators - hoe often are they spot on with what a DD1 would tell you?

[@wal]

I’m going to do in car tests and will let you know. I’m more of a SQ guy, no wall of subs for me...I’ll comment more on the quality of the bass, not just the quantity

[@mr2jzgtte]

Lol your killin us...we all wanna see the t1500bdcp...nice power for the size on that Sd

[@wal]

I’m excited about the T1500 also 😬

[@vellowilson5857]

I seen a lot amps at 2500 watts, but don't put the numbers out like xtr2500 orion does!!!

[@catch22frubert]

Vello Wilson That's exactly why I bought the Orion. 2976 @ 12.6v on the birthsheet, and my subs say it's telling the truth.

[@dcaddell1505]

Would this be a good amp for 2 Rockford fosgate TO 12s

[@bobbyhorton4034]

Yes!

[@BenjaminEsposti]

It would be nice if the Amp Dyno could also do a frequency sweep, so it can measure the frequency response of the amplifier, and perhaps also measure the efficiency at varying levels of load.

[@wal]

I agree, but it doesn’t and getting 40Hz and 1kHz gives you an idea of power for subs vs mids/highs

[@kswis]

Ya brotha whens the in-car test coming? Excited to see the Rockford slaughter the competition 🙌

[@carlschultz7341]

This is a bit off the subject but I would like to see you dyno a power base ase-500.1 1 ohm stable

[@Dave-ek2jx]

Hey Big D, What do you set the gain on an amp to when you test them? What I am trying to figure out is when does an amp make its peak power? I just bought the Soundigital 1200.1 but it powering an Alpine s-w12d4 which is only rated for 600 RMS. If the amp gain is turned all the way down will it still pull 1200watts if I crank my volume?

[@rmblwgn]

Hey big D! Could you retry this test in the future with a dual 4ga input for power/ground or 4ga to 0ga adapter

[@jasonjackson329]

Didn’t Steve do a dyno in same amp a while back and it did some crazy numbers. And I think it’s the same amp. I wonder why his did way more power ? Or was it a different brand amp

[@wal]

He tested the Power series. Those have larger inputs, not sure the other diffeeences

[@jasonjackson329]

BigDWiz ahhh ok gotcha. Yeah that makes sense now. Cause I was like how in the world. Lol same dyno

[@infohackerinfo1045]

can you test the sd 400.2 in 4ohm version?? certified brigde 4ohm. xd

[@kewingpaez5808]

I have a question what’s the best choice for a 5000 watt amplifier between soundigital , banda, taramps, stetsom

[@luke_784lowfrequency8]

Banda viking 5k best if both worlds solid amp!

[@luke_784lowfrequency8]

@Dave Micolichek that's just your opinion

[@luke_784lowfrequency8]

Powerus or banda viking great amps

[@kewingpaez5808]

Luke_784 Low Frequency soundigtal power series?

[@dillonkoch72]

I bought a Brazilian made corzus amp For $430 ill let you know if its worth the money

[@mrchubbyfella9421]

@BigDWiz Let me ask you this would you rather have this amp or the PPI 7000K that the other dude Ryan did? They are both hungry but the PPI is so much cheaper

[@wal]

I think Ryan would agree...the Orion XTR-2500.1Dz is tough to beat. He uses one in his daily

[@jesusroblesdurazo9741]

I just bought the same amp, and have stock 90amp alternator, a redtop optima in the front and a northstar agm31 in the back. I haven´t install it yet, do you think i might have to change my alt, add another battery or both?

[@wal]

Depends on how you use the amp. If you listen to a lot of bass heavy music then you will need bigger alt

[@jasonneal]

If you have the money to spend, It never hurts to go ahead and swap it for at least a 140amp alt. If anything your batteries and car electronics will love it.

[@mamao_st_is_mine]

So I've recently acquired a clamp meter and Ive tried checking the current on my vehicle electrical system. For my electrical I have a CES 180amp alternator and an xs power d5100r with a big 3. When clamping my electrical, the readings that I get are no where near 180amps even while going full tilt on my 2k watt Soundsystem. Feed back is appreciated

[@ricgaming917]

Make sure your clamp meter supports dc,most of them read ac amps only

[@mamao_st_is_mine]

@@ricgaming917 of course the clamp meter reads DC. I would not have bought it otherwise. The mechanics in my area say that I shouldn't be getting a reading that matches the full output rating of my alternator

[@ACLBrian]

See If you can find an old school lanzar vibe 1200d amp. It was black with a orange logo in the middle. I think it was 1ohm a stable but I believe I ran it at .5 ohm (or maybe just once...lol) always wondered how much power it really had. Also I had an old school California series amp it was white with a long red light in the middle (can't remember who made it) I just remember having it in my 86 Monte Carlo with two jl 10s and I mean BUMBING....LOL long time ago

[@williamotto7528]

that California amp was a Profile amp, they used to have it in the crutchfield catalog back in the 90s next to the US Acoustics amps, I miss my old US Acoustics setup, and that was in the back of a '87 Monte lol

[@jonatangoulart9789]

No Brasil os testes são feito a 60hz da diferença de potência

[@fellipeteixeira9217]

Taramps mede em 1khz só presta pra corneta kkkkkk pra mim todos testes deviam ser em 20hz

[@jonatangoulart9789]

@@fellipeteixeira9217 nova linha da taramps e medida em 60hz agora 😉

[@fellipeteixeira9217]

@@jonatangoulart9789 Menos mal, mas 60hz ainda é quase médio-grave

[@SKaReCRoW]

Hey I have that same Harbor Freight workbench in my bedroom.

[@heavyset0223]

IDK, I got the orion xtr 2500.1D and the birth sheet says 2977watts and it was almost half the cost.

[@wal]

Underrated FTW!

[@staples4335]

Orion still make good gear :)

[@staples4335]

I have the XTR2200.1 and yeah. Goes hard!

[@Felix-vd4du]

@Big D could you make a test about the high voltage Taramps amps?

[@evanfield8361]

what happened to the Boland audio amp test???

[@RafaGmod]

If you want to know why the brazillian market needs theses powerfull full range amps, searche for "carreta treme treme" in youtube. It can be heard from 2 cities away. crazy stuff

[@wal]

😬👍

[@giorgiomessina5368]

Good video but incomplete. Miss the most important test (12.6v test)!!!

[@nickgenre1]

Big d Wiz please test a cerwin Vega pro stroker series 3100.1

[@rowboyto156]

so when is that test gonna be uploaded. i wonder what the damping factor will be @ 1 ohm. looking at jl audios slash amps the damping factor drops when the ohm load gos down for example the 1200/1, 4 ohm @ 50 hz is 500 and 2 ohms @50 hz is 250

[@24-7flounderproblem]

you do hair big D?😉awesome vid thankyou sir!!!!👍👍👍❤🕺

[@wal]

😁🤙

[@AIexanderHartdegen]

Hello Derreck thanks for your video, I have a question. Lot's of people talk about noise from Taramps, heardable easily from speakers. But we can notice than Soundigital have pretty the same prducts, but more expensive. Does the difference of price mean than Soundigital are less noisy than Taramps? Thanks

[@wal]

Are you using them full range or just for bass?

[@AIexanderHartdegen]

Hello Derreck I am talking specially about Taramps HD3000.1 (no matters the impedance) and Soundigital HD3000.1, so, full range amplifier, no for bass only. My question is if the little noise is less heardable on soundigital and if it can bored the listening at low level.

[@wal]

Only noise I hear at low volume is fan of its on (with both amps).

[@AIexanderHartdegen]

thanks a lot.

[@pewtercamaro1]

Yo bigd have have u ever dyoned the crossfire vr1000d? I recently got one literally new with bass knob and everything. Its korean made so i was wondering the wattage it actually does. Ive heard good things about in on some forums its an old school amp i believe 2002 version. I wanna see a dyno on it cuz ive just seen the bmf version the newer model

[@Gabriel-ld9lf]

Can u do a dyno on the new 3k and 5k small footprint cerwin vega amps

[@wal]

We shall see

[@charlespetersonii6989]

@@wal +1 on CERWIN VEGA AMPS! PLZZZZ

[@MASTER_GP..7315]

between this one and the stetstom 3k which one is better efficiency wise

[@indiobaez3314]

Neither

[@Sigiv2]

Hey please test the hcca 3000.1dsplx looks bad ass for the price

[@wal]

Stay tuned...😬

[@calvinplummer6100]

I have the sounds digital 2500 but it says 3000 at 14v these amps are nothing but power

[@Xstreamaudio]

Big d....love your channel bro!

[@wal]

Thanks dawg 👌

[@MyAdelsom]

Hey bigdwiz sd umas das melhores marcas do Brasil no entanto fraco nos testes

[@AudioTechnologyEdmonton]

Have you dynoed an Alpine PDX amplifier? I know they are rated the same power 4ohm 2ohm and 1ohm. I wonder if that's legit.

[@wal]

I actually got one in recently, hope to test it soon. PDX-M12

[@AudioTechnologyEdmonton]

Awesome I can't wait! Keep the videos coming!

[@craigshelhammer5683]

Wait...theyre 1ohm stable?Damn.I just sold a pdx 600.1 because I had no use for it...wish if have known,id have kept it as a backup

[@iggyp7049]

I've got a preproduction power series 8k that is going into my build, kind of a hybrid between the evo2 and the production power 8800

[@marziodance]

la mia autoradio ha l uscita rca stereo,quindi non posso utilizzare questo amplificatore,visto che di entrata rca è soltanto una cioè mono....è così???

[@francescogerotto8496]

Chiaro amico que é mono .... é per subwoofer ok ???

[@francescogerotto8496]

E se gli scrivi in inglese e meglio.... già che sono nord americani....

[@BrakelightWarranty]

Have you tested any of the cerwin Vega boomber series amps? B51, b52 or b54

[@stetlerb]

im needing a small amp to run (2) 10" subs. do you think this amp would be a good choice? What subs do you recommend ? I need small air space subs. looking for big deep base though

[@cristiannieto6992]

SuperRhino_R1 I recommend two 1500 watt rms subwoofers both will handle the 3k watts together

[@stetlerb]

Cristian Nieto what brand /model sub would you recommend paired up with this amp ?

[@cristiannieto6992]

SuperRhino_R1 hmm 🤔

[@cristiannieto6992]

SuperRhino_R1 what is your maximum size subwoofer you can get? And what is your budget?

[@stetlerb]

Cristian Nieto either (2) 10” or (2)12” But they can’t be too deep. They have to fit into the saddle bags. Whole bag will be sealed off as an enclosure. Budget ... hopefully no more then $1500. Total For 2 speakers

[@EyesPlay]

wow! very good amplifier! test the Ground Zero GZIA 2080HPX-II seems to be a good amplifier for the price! it's an AB class amplifier with 2 channels it is rated 60x2 at 4 ohm, 80x2 at 2 ohm and 1x240 at 4 ohm (bridge mode) all with 14.4V 1% THD it has very simple settings... cross over (lpf and hpf) and gain

[@blackflworer]

I run a sd1200 evo on a 1500w sub. This amps stay cool and atleast in my case its durable af. I push it to the absolute limit and no heat, no protect and despite it shows clip on the indicator the sub doesnt heat and no smell or dark coil signs.

[@beefysghost867]

I don't think that the clip light is accurate on the 1200.1 I am running the Same setup pretty much, American bass hawk 10.d4. And the sd1200.1

[@Criptosistemas]

Cuantos amperes consume ese amplicador???

[@ulisseshonor4784]

If you like this Model, i can send you for less price direct from Brazil!

[@bombilyazbombilyaz4895]

Ulisses Honor how much for the 8k ahipped to US.

[@ulisseshonor4784]

Good Morning, do you have enough power for this amplifier? It´s 420A.

[@elProtoTyp]

Ulisses Honor hit me up with that discount lol

[@ulisseshonor4784]

elProtoTyp Ok! Send me a email with your address to talk about it. Thank you. We have the newest SD 12k Amplifiers.

[@chrisargueta1988]

im interested in one how can we comunicate

[@Gusttavo37]

Melhores amplificadores aqui do Brasil!

[@jH0wxd]

banda >>>>

[@Gusttavo37]

@@jH0wxd Banda é o melhor, claro! BANDA >>>>>>>>>>>>>>>>>>>>

[@leonardojunior5705]

Power Systems e soundmax ficam atrás não.

[@Criptosistemas]

Por favor, quiero saber cuantos amperes consume ese amplificador en 2 ohmios!!

[@lawrencecoore3569]

I love the videos seen that I'm a big big fan of car audio

[@wal]

Thanks brother 🤙

[@bradprice7032]

the place is went to , to get my stuff installed sold mattd and sound difital . i bought my own box my own subs two zvx 12s and they sold me a 3k amp unfortunately i bot on sub used but brand new at dual 2 so i bought another dual. 2 so he got me a 3k 2 ohm soo wth am i gunna do

[@BoxImpala313]

What Did you even say

[@salvadorfonseca165]

Ever thought about testing a Zed Audio Minotaur III?

[@workingclassperson2124]

My new stetsom 6000 2ohm has those flimsy adjusters as well. Going from a AP3000.1d I only feel and hear more power the AP Would thermal after bout an hour -390amp U.S Alt XSpower d7500 in my engine bay and a XSpower d3400 as a secondary so I got good current and I use Orion dual 0 Gauge to single 0 gauge input adapters. Stetsom stay cool to just warm so far that is. I went to my ported box cause I was hitting Xmax to early in my sealed box. Clip light helps would be a million times better with a remote gain knob with clip light imo. Power is clean and brutal put its s different amp with different setting knobs then I’m use to so I’m trying to find a way to get the most optimal bass usage/output. Seems to be doing it’s rated though 🙃

[@canadiancaraudioaddict4766]

I cannot wait to see the results on the Banda Electra Bass. I was thinking of getting rid of my old 2001 orion 2600watt 26" long beast and getting the banda.

[@wal]

I think you would be really happy with the Orion XTR-2500.1Dz. It’s literally my favorite amp for the $$ and now they can be found for $330 or so

[@canadiancaraudioaddict4766]

Thats great! Too bad my sub is dual 4 ohm. Thats one of the reasons I chose the orion I have and why I was considering the banda. Or I could just fry the sub and recone it.

[@umarkathab5143]

Awesome videos man. Very funny too. Thumbs up!

[@wal]

Thank you for watching and commenting!

[@bobby8719]

Long time subscriber. Great info. Can you do a sundown saz3500d? I would be very greatful.

[@wal]

Stay tuned, you may like what’s coming in the next month 😊

[@justins1148]

That last test where it went over 3k how many amps did it draw

[@johnnyditommaso6807]

Big D what did you like better? The Taramps 3k or the Sound digital 3k Please let me know. :)

[@wal]

I liked the Taramps MD1800.1 better than both of those 3k’s on subs. In my opinion...

[@mitchellroberts7954]

He's going to post results when he's done testing all of the amps

[@mamao_st_is_mine]

I guess if I had just waited until the end of the video I probably wouldn't have made my comment but still wondering why the musical amperage draw is so low

[@Karnescitytx]

Is the inputs right mine is only one input and one output

[@Karnescitytx]

Yep paused it one input one output...tisk tisk

[@johnnyh127]

So D! Thanks for getting this guy up there! I had been bugging you for a little while to test one of these SD 3k's! You always deliver! So I was looking at using a 2ohm version of this amp as an upgrade to power a pair of older model Fi SSD 10's in order to have a little bit of headroom because they don't quite need a full 1500w per sub. So what is your opinion of this? I wanted a small high power amp to fit in my pick up truck since there isn't a lot of space to keep a big fat amp out of the way and protected from normal truck use. What do you say? Should I go for it? Or there a better option that is no larger than the SD that perhaps I should look at? Thanks again for the video, and I look forward to hearing your opinion.

[@wal]

Give me some time for an in car review. Something about these Brazilian amps that just sounds “thin” to me, but maybe I’m just crazy. I’ll report back hopefully in a few weeks

[@johnnyh127]

BigDWiz awesome! Look forward to it!

[@ivanjmg]

I have this amp and i really need any solution for replace the noisy nightmare fan :/

[@flatdog691]

for the heck of it you should have brought out the eggs and fried a couple I bet that amp gets extremely hot after a few minutes pulling that much current

[@thatscardo86]

Yes I own this app it gets very hot very fast but the amp does hits very hard, I would not play this amp on hot days I play my amp only if it under 85 degrees outside

[@EBMproductions1]

why not run it at less power say 1500-2000watts then you can chill probably won't run as warm or what?

[@indiobaez3314]

Yeah I’ll Still To My Salt Amps 💯💯💯💯💯

[@easyamp123]

are they irs2453's with irs2092 output controllers?

[@edgargzzg4495]

Would this amp be better than a sundown sia 3500.1?? I’m using it with 2-8” sundown x 800rms each. I’m thinking they need more power to them..

[@wal]

I’d go with this one - Down4Sound JP23 Amplifier Review and Amp Dyno Test [4K] kzbin.info/www/bejne/q5fYoJxjq9NgnZY

[@AaronBilger]

Hey can you do a amp dyno test of the Sunbuck MP326BT?

[@wal]

I’ve never heard of that amp brand or model? What part of China does it dwell?

[@jamesalexander5847]

BigDWiz LMFAO... Beat me to it... I've never heard of it either... Any way I have 2 ohm DVD kicker l7 15... And I'm running it with pioneers GM d8601... It sounds really good but the sub barely moves... I know they can handle a good bit of power... Any recommendations on a am that would make this sob flex?