Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/... In this video, I have explained the method of making a 3D valve drawing in AutoCAD.
Пікірлер: 215
@sourcecad4 жыл бұрын
Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
@akhtarkamal42083 жыл бұрын
Challenge 😎 --------------------- 🗣️ Can you draw a circle using rectangle command in the AutoCAD? You Don't know?😱 Go now and Watch this video how to draw a circle using rectangle command. kzbin.info/www/bejne/aHaUfYmPg9pjnJI
@hamphreymaakgetjemmola66927 жыл бұрын
O.M.G, Most satisfying video explanation. Good work big brother it really gives the light to ones knowledge.
@rakakalogitech5077 Жыл бұрын
Thank you so much bro, you are a saviour 🥺 !!! I was tired searching for how to remove that intersecting part of one pipe inside another pipe. But I didn't have any idea that it is done through slicing process, and luckily I found your video. Now, I can complete my project bcoz of u. ❤
@johanndupreez77366 жыл бұрын
Cannot believe how easy this was. You know how to tutor. Thank you very much. I subscribed.
@sourcecad6 жыл бұрын
Thanks Johann
@muhammadusamaarshad13723 жыл бұрын
Excellent! I will recommend your channel to everyone who will desire to learn AutoCAD. In Shaa ALLAH.
@Crseery5 жыл бұрын
Its a cool vid. In the beginning you say the units don't matter and use the "default" however everyone's computer isn't set up the same. I opened Autocad and spent 15 mins trying to get past the first line because it went so far off the drawing surface that I couldn't see it or scroll out far enough (because it was 150 'units'). Maybe if we had started with setting up the units I could have made it through more than 1:06 of the video. Sucks because I really need the 3D practice. Thanks for sharing your knowledge. I will check out one of your other ones and see if I can follow it.
@user-yd3yh9zb4b7 жыл бұрын
I would say You are a great guy and your videos are rich with knowledge n techniques so THANK YOU SO MUCH for your efforts and Always I look for your videos Thanks again
@GautamKumar-no2pm4 жыл бұрын
good
@okellofelix45705 жыл бұрын
You guys are the best, just keep on with the good work. We love your engineering knowledge, thanks.
@davidmathis70305 жыл бұрын
Most helpful cad video I have seen, thank you for making it! You are providing a great service.
@Songoku-ov1gr7 жыл бұрын
Hi Jay, another master class from the master CAD himself. Look forward to more tutorials in both 3D and 2D.
@sourcecad7 жыл бұрын
Thanks Songoku :)
@mikkaalico5508 Жыл бұрын
how nice it is..... thank you coz through this I was able to get more techniques and learn a lot...God bless you always!!!!!
@kavz187 Жыл бұрын
You are an absolute legend, this is exactly what I needed to know. Thank you!
@legendsofmyself2 жыл бұрын
Thank you so so so much.... I just needed the idea of creating a surface to slice two intersecting cones. I learnt so many things just from this video. I am modelling my project in abaqus and the modelling environment is so unnecessarily complex. Hence I need to use a more friendly software like autocad 3D before exporting and analysing. I am glad to have seen your video. Thanks Again!!!!
@ravimourya61904 жыл бұрын
The most simple tutorial i watched ..👍👍👍👍Thanx a lot
@Adnan_Kamal_VCA4 жыл бұрын
When I use prespull for circles at 6.59 min it becomes totally solid but in your video it Hollow What I'm missing
@tusharnavgire53123 жыл бұрын
very nice, I would like to learn much more mainly about all modify tools & commands in easy way to use
@neaton017 жыл бұрын
Great tutorial and I'm looking forward to learning more 3D.
@mieaihtaw37254 ай бұрын
Thank you so much and shall practice all the 3D video you made it. Wish you be more and more successful🤩
@saiprasadu60183 жыл бұрын
initially I took more time to understand this slice cmmnd. finally I've learned.but I won't be forgotten. thanks bro.
@sujithramapuram73225 жыл бұрын
thanks sir, I am a beginner in this field ,very useful and your video give me a confidence
@corporallee446 жыл бұрын
Very clear instructions, just what I was looking for to start with.
@jorgeeduardomoretones7337 жыл бұрын
Excelent this video!.. this was my first drawing in autocad i was able to do. Thank you!
@junhermogino83507 жыл бұрын
sir thanks a lot for this tutorial videos..it helps me a lot in developing my drawing skills..hope to see more tutorials from you.more power to you sir..
@banotheshwar58245 жыл бұрын
It is very helpful for learner please update more video s thanks for your clear explanation
@nsggood Жыл бұрын
Thank you Sir, excellent training video. This really helped me understand how to orientate the UCS and develop geometry relevant to an obect and also how to trim intersecting hollow objects. Suscribed😁
@stoffel13305 жыл бұрын
Thanks for the video, helped me alot. I'm new to 3D designing in CAD.
@gdblackthorn41373 жыл бұрын
Wow, it is amazing what you have done in such a short time here...
@kavishsoorya52827 ай бұрын
The last triangle 📐 doesn't fix exactly on the right pipe , it fix in straight way. Where as in diagram it fix perfect(tilt manner)
@samyyoussef83805 жыл бұрын
The best of all 3D concerning Coordinate systems , handling views and dealing with the slice command; actually it is a package 3D tutorial.
@emanuel_azn7 жыл бұрын
Thanks a lot! This will be my final work for school.
@akhtarkamal42083 жыл бұрын
Challenge 😎 --------------------- 🗣️ Can you draw a circle using rectangle command in the AutoCAD? You Don't know?😱 Go now and Watch this video how to draw a circle using rectangle command. kzbin.info/www/bejne/aHaUfYmPg9pjnJI
@vinayakachari21527 жыл бұрын
Sir,This is the very good video and very useful to all.Please send more videos of new one .Thanking you sir
@sourcecad7 жыл бұрын
Thanks Vinayak. I will try to increase the frequency of uploads on SourceCAD.
@davebog35754 жыл бұрын
Its a great pleasure to have you on KZbin, but am new to 3D Modelling, can you please share with me those very first tutorials for beginners like may be the introduction to 2D or 3D Modelling. Thanks.
@user-ek3jh5eo6r4 жыл бұрын
Thank u again,, each video is very useful& clear
@rahmanrahmani28965 жыл бұрын
Thankyou, you for another excellent u tube video. Could you please include the 2D drawing for your followers to practice. Do you have any plan to do Revit tutorials in the future, because CAD gradually will be replaced by Revit. Keep up the good work and god bless you.
@uremailingalex5 жыл бұрын
Clear and concise. Excellent!
@johannessudibyo7412 жыл бұрын
Thank you for explaining, GBU
@Ravisatparkash7 жыл бұрын
Hi.Its been very long time waiting for your video. Your videos are very useful and very good.
@daos200003 жыл бұрын
such a lovely video.. Understood clearly
@mrqloak14532 жыл бұрын
I have completed this figure on CAD 2021 and it actually worked, though I had to go back many times to his given command. A lot of the commands he did is errorneous in the new version of the program.
@davidbustamante74217 жыл бұрын
quite fast for beginner like me, but im amazed how u operate all the commands.
@earthstrong78553 жыл бұрын
please increase the volume friend, thank you for the excellent tutorial though
@Atilaz Жыл бұрын
Thank you, bro, you are the genius
@abelpinter72404 жыл бұрын
Very clear instructions. It is great! Thanks
@cadworks63864 жыл бұрын
Some videos of typical model here: kzbin.info/www/bejne/Y4nJc5ivrN-fY5I
@bezibedie42595 жыл бұрын
Hi. I can't do the copy(7:30) like you . When I see Z axis and type 138, it gives me wrong result. I had to activate Ortho mode to get there. Can you tell me why ?
@cineclinic86606 жыл бұрын
I'm happy to see your tutorial. Thanks to do this type of project. and make us another video.
@humenbot246 жыл бұрын
Hey Jay, Why didn't you went for solid extrude from start. You started with surface extrude then thickened it. If I start from solid extrude from beginning of drawing, will it matter or it will be same thing ???
@seanduke223 жыл бұрын
You are the best, I love your voice
@alunbelton8426 Жыл бұрын
Great tutorial, thanks. How do you get the steering wheel to remain visible and as displayed in this video?
@viralraval3222 жыл бұрын
Better useful of *mirror* commond *Copy* space B. Cause copy commond in always dimension take it
@satyajitsahoo86565 жыл бұрын
Sir..i have a problem with my autocad software..its the 2010 version..the problem is i cant find all the toolbars on the home tab such as surface toolbar,parametric toolbar and also not able to see the View Cube on 3d wireframe ...also not able to see the Drawing number ,view names on the left top corner ..facing alot problems..kindly respond with the solution.
@rambahaduryadav75867 жыл бұрын
Sir,This is very good video .Please send more videos of new one .Thanking you sir
@surferinthedark4 жыл бұрын
Very nicely explained - thanks a lot.
@Webtactics6 жыл бұрын
Very well explained, thank you for sharing your knowledge.
@normantogonon410 Жыл бұрын
Thank you so much and GOD bless
@haroon3ddesigningacademy6 жыл бұрын
Most Satisfying video.
@diyadas11323 жыл бұрын
It was really helpful...thank you verymuch
@sumitlowrence3297 жыл бұрын
Hi, thanks for the tutorial video, it is really helpful for beginners like me!
@raizan956 жыл бұрын
Where did that concentric circle came from? @14:10 , can u explain how!!? Other than that everything went good
@sourcecad6 жыл бұрын
Start watching from 13:38, two geometries with different radii of internal circles are making that final concentric circle.
@adriangough75285 жыл бұрын
AWESOME TUTORIAL !!!!!!
@gfk4713 жыл бұрын
very good tutorial , thanks
@easypc56086 жыл бұрын
Nice work. Good tutorial!
@madhusankawijerathne84353 жыл бұрын
Can i change color after draw?? Or do I need to set it at the beginning..?]
@mengxuebi4016 жыл бұрын
Hi! I love the video but I just hope you could explain more on WHY you are using so-and-so functions. THX:)
@rybamumu26 жыл бұрын
I can't select the surface
@danielteyehuago16334 жыл бұрын
Please should have added dimensions to the actual drawings for it to be simple for us... Also try change the to vertical so that you can draw at one side and the image at the other side too...
@tabishfaizy78197 жыл бұрын
Great Tutorial bhai.
@haythamkader62205 жыл бұрын
Hello, I am not able to trim the 3 circles in the last object. When I select trim and enter the arcs are not marked and trimmed. What could be the reason? Thank,
@TheNaeem0007 жыл бұрын
this size cm or mm pls tell me
@simontillema55993 жыл бұрын
The polar tracking doesn't work for me. Any ideas how to turn that function on?
@paulbunyan77923 жыл бұрын
Hello I have followed this tutorial extensively but whenever I get to the point of slicing it wont let me and it keeps saying no surface selected
@peterparas49995 жыл бұрын
what is the diffirence between press pull command and extrusion command?
@inderjitsinghsaini19132 жыл бұрын
triangle type flange edge is not aligned to the main pipe axis. please show that also to adjust.
@GerardoElJerry1012 жыл бұрын
I just can't get surface trim and slice to work for me. Do you have someone I can message you some pictures so you can see what I'm talking about?
@chizzwigwe774010 ай бұрын
when I try to extrude I only have a solid solid option, no circle, I have selection cycling turned on
@newtothisthing3 жыл бұрын
Hi. Is it possible to divide an irregular 3D object into equal parts using AutoCAD ?
@jimmymtange93045 жыл бұрын
That was wonderful, I like it
@Trendyrapslut5 жыл бұрын
how do you keep bringing up that little selection window when you click on the geometry?
@diyadas11323 жыл бұрын
Before slicing whhen i am going to extrude i am getting no option to extrude the circle...there is only one command i.e. 3d solid...what to do
@_silverseiyan52322 жыл бұрын
Hi, while trying to copy and paste along the z axis I found I couldn't input the length, it just kept showing 0.0000
@kshitijkumarkushwaha89032 жыл бұрын
Sir, you make certain commands a little bit complicated 😐. Bcoz we are using certain commands for the first time.
@dvand8158 Жыл бұрын
cannot select the second surface to slice. Know why?
@nathanelrond879610 ай бұрын
I have a problem with the copy step… Tried everything but my component cant align with the z-axis😭helpp
@harshchouhan70074 жыл бұрын
There is no option coming after selecting a circle for extruding circle
@vithpho7851 Жыл бұрын
I'm very interesting for your sharing as my channel in Cambodia
@corporallee446 жыл бұрын
Easy to follow, BUT, after selecting the second 'Extrude' command and pulling the circle to the line, I have a problem. probably simple but the shaded command shows me two separate tubes, which are not connected as shown here. I have tried it numerous times but can't get it to connect. WHY? Thank you for any useful comments.
@sourcecad6 жыл бұрын
Hi Arnold, without any screenshot, it will be difficult for me to tell the exact reason.
@thevegg32756 жыл бұрын
I have never gotten beyone 5:55 where the second slice is performed. It keeps failing. Can you postulate what may be happening? Thank you!
@zigotina3 жыл бұрын
13:04 if you can't trim arrayed circles, first explode them
@mohammedaslam38366 жыл бұрын
very good work >> txs..
@sourcecad6 жыл бұрын
Thanks Mohammed
@emulsionadordepositroness54177 жыл бұрын
hi!, at the minute 13.09 i do exactly what you do to trim the circle lines, but, nothing happens..just a message "the object was not processed by trim"... what can i do?..i will apreciate your support.
@MasumCanada3 жыл бұрын
Thanks for the info
@dr.aliyasirhasan39864 жыл бұрын
this is amazing video
@rendellsoberano87842 жыл бұрын
is there any payment method other than paypal? i want to get a certificate but i dont have a credit card linked on my paypal.
@martinneps93875 жыл бұрын
What if you already have a piece and you want to make another piece like it is That any easier please come it back in let me know and I only speak English
@skshah79676 жыл бұрын
hi sir I saw one of your 3d tutorial which is 3d object can be hide , I mean 2d geometry will remain and 3d part will hide I forgot now I am trying to find that video but failed, please help me
@bertli49702 жыл бұрын
very nice tutorial
@pirropeti63597 жыл бұрын
It is great. thank you
@LalitR123 жыл бұрын
4:37 sir have not any " enter" option when. Right click What i do for ?
@akuldarji5 жыл бұрын
It's amazing..
@andygiang67567 жыл бұрын
My filet edge curves into the solid instead of outside of it. Is there a way to reverse the direction of the filet?
@faroukbouras48407 жыл бұрын
PLS make sure the pieces are joined -union command- and use filletedge in the solid tab. good luck