How To Install a Rangehood

[@TheROBSKI7777]

Use the big level to make sure it's not "On the Piss" love this bro

[@acesydney2769]

Dave you are a deadset champion! I'll be installing my first rangehood tomorrow

[@sparkydave]

Cheers mate how did you get on?

[@Geckomayhem]

Yeah, boi. This is what I needed to see. Gonna get a sparky to do the wiring behind it but hoping to install our rangehood ourselves. Champion.

[@pajacobmn]

Some engineering advice from someone with decades of professional experience designing exhaust systems for all kinds of commercial and industrial applications: using flexible duct like this is one of the most effective ways to reduce the effectiveness of your range hood. It's cheap and easy but comes at the cost.

[@picflight]

From up over to down under, great job given the limitations!

[@FreeSeoul]

At 10:10 did you install the duct fan facing the brick wall on purpose for cosmetics only? I would have assumed it blows out and away from the wall to keep the house cleaner but the fans seem to tilt towards the house?

[@hamfish225]

the guy who installed the range hood at my house just left the cable dangling and we had to connect it into the side of the oven, this is far better!

[@muller6592]

The way you talk is hilarious 😂

[@pistolasnine8389]

Hi Dave, do electric hard-wired ovens need to have condute pipe cover the connection cable?

[@Handleur]

I use masking tape when I'm marking holes on jib and finished surfaces. I'm a Sparky and this guy is on to it.

[@teratakemp5056]

What did you do with the 2 other wirring sticking out.

[@dynamn]

I just heard a big bang while I tried to switch on the light on the hood, the whole vent stopped working now, Im wondering if there's a fuse that I can check please? The models is electrolux efc650 Appreicated if you can shed some light

[@picflight]

Why didn’t you route the duct out the roof? That soffit will rot with all that moisture exhausting in that area.

[@rinoadair1683]

Every roof protrusion adds extra cost, time, and risk of leak. (That would be my reasoning as a homeowner/property investor)

[@VIVA685]

Hey mate did you ever have a problem with the inner shroud not finishing flush with the ceiling all the way round. if so how did you fix it .

[@picflight]

Is the glass overhanging the window?

[@jacobbio]

I would redo that whole kitchen. The appliances are in the wrong places. And it’s off centered with the stove😫

[@frostfang83]

15:35 My favourite brand of hammer and chisel

[@dombarton2483]

Excellent video !

[@perthtransportguyz]

Can thou do how to replace an exhaust fan

[@cryo_life]

You can install a wall mounted exhaust fan.

[@krishath7085]

Nice job dude. Thanks to share.

[@mehuldesai7501]

Excellent.

[@sapanpatel4422]

“But you can still look through it, because it’s glass” lol

[@matthewconnolly9508]

😆 🤣

[@tommygun7702]

Lol

[@mkp1359]

VERY GOOD EXPLANATION

[@townshipbs2335]

the hood dont have to be on the stud???????

[@matthewconnolly9508]

Awesome bro.. keep it up

[@blackdatto]

Hey this is the first time I have seen ya with a socket that’s installed "the right way" around (being horizontal). Hahhaa

[@whatacoolguy4094]

old vid but i have questions, that holesaw it cut through soffit just fine? and outside grill facing towards the house, i always installed facing out thought that would be ideal for the airflow not blowing on to the wall? make sense cant see the the duct from the outside but the air flow might make the wall yellow over time??

[@sparkydave]

Holesaw cut fine although these days its benched and I would no longer use it. The grub screws tend to slip out over time. Exterior grill position won't compromise airflow but I understand thoughts re residue. I personally haven't seen residue build up over time on exteriors, perhaps if the dwelling was left un maintained for a significant period it's defo possible.

[@whatacoolguy4094]

@@sparkydave thanks for reply, love your vids keep them coming please.

[@michaelromero6594]

What about the filters man they won’t fit for me I don’t know what’s up

[@datractor]

Epic vid bro 👌

[@paulalabi8003]

Can someone list the tools I'll need to install a rangehood cooker hd70, and I'll appreciate if I can get the manual too

[@GAPOWERade]

The crocodile hunter approves of this video

[@Geckomayhem]

The crocodile hunter was Australian... May he RIP.

[@DragonRyder2979]

Great Video mate. If I can pick one thing? Did you earth test the rangehood chassis to confirm correct earthing. I don't trust manufactures to do it properly. I've come across to many where they haven't earthed correctly.

[@mariofernandorangelservin5763]

how many inches or cm? your extractor

[@cazcaz2701]

It was probably the same cowboys who designed my kitchen!

[@arturojimenez4382]

Do a need a separate breaker for a range hood or does a normal outlet work?

[@mikewiseman2739]

Normal 10A single powerpoint will do bro or a surface socket outlet wired to a 2.5mm T&E cable going back to another power point or 16A/20A power circuit in the ceiling. All done by a licensed electrical contractor of course.

[@saraabodian1687]

Excellent work mate thank you

[@jmcmelendez1654]

you are awesome man.

[@verastanding]

So if I'm replacing my old rangehood, do I need a sparky?

[@sparkydave]

If a power socket is there already, then you shouldn't need a sparky

[@ThanhHoai-e6x]

Amazing🎉🎉🎉🎉

[@barryyoung1747]

Hi mate love your work. Does it have to have an isolator switch? Just seems a bit overkill

[@sparkydave]

Hey there, the Rangehood does not need an isolator at all, just personal pref on this install. Cheers

[@orangaharris640]

What a process damn rangehoods aren't easy 😅

[@carolynfriend2607]

Very good instructions. Nice range hood for extremely poorly designed kitchen. Don't think I would have bothered.

[@simplebeautiful7923]

Wow!🤣🤣🤣🤣🤣🤣🤣He put a wall mounted range hood next to a window. That is definetly kangaroo code.Gooday mate!

[@ChatGPTeeh]

Dude need mine replaced.. motor blew up..based in Melbourne

[@CadyJassar]

Something strange with this clip... It is just keeps buffering and it just runs a few seconds before it starts buffering again. I tried other clip on KZbin and they play just fine... But this one is a nightmare.

[@sparkydave]

Hey mate thanks for the info - have seen it happen before a couple weeks ago on this same video, think KZbin having issues...

[@CadyJassar]

@@sparkydave I tried it on a computer and it went OK... thanks a lot... great video

[@mufuliramark]

Questions surely have to be asked about the positioning of the cooker, and cutting through the window frame is just unfuckinbelievable…..

[@Krondorf.]

i would fill those gaps with white silicon :)

[@mikewiseman2739]

There is a lot of work to install a range hood. Just make the customer aware of the amount of work required to install a range hood and then charge accordingly.

[@dalemiller5893]

Now clean the glass every time you cook not a proper choice brother 😂

[@knight32d]

A leveler needs to be used first when installing the mounting bracket and not after it has been screwed onto the wall but overall mission accomplished.

[@daliumangx]

when i see u hole saw i laughed

[@ВладимирПутин-е7м]

That is the WORST position for the oven. Pity the extractor isn't centred more.

[@serafruiz7155]

You Did a good job but did you get in trouble with ur wife because the off design? Wife it’s gonna need a good chiropractor for her neck due to the off design 😊

[@irisheyes6781]

The position of that cooker is a fuckup

[@ritacollins2635]

I dont know what to think, yes you did it properly, but, it was off centre, looked awful , i wouldnt have put it on youtube, obviously you did what the client wanted, hopefully they call you back to reinstall a better designed kitchen, and rangehood, hope you get good jobs from this

[@reedy8585]

hahhahaha

[@goldentrowel1968]

Why push the plaster off cut into the cavity you could use it for plaster patch ups, you're one rough bloody sparky

[@RicardoGarcia-sz6rb]

hey my friend you know that all the fumes are getting back in the attic trough the vents, the ones that are around your house right where you put the duct end. Really I think is a bad idea .

[@sowrong1611]

Make a video of your work cowboy

[@goldentrowel1968]

@@sowrong1611 That would only show you up. Have worked with New Zealand sparkys before all hopeless

[@sowrong1611]

Golden Trowel go on then, show us up!

[@adriansosa1430]

The instructions say not to ever mount one of those by a window!!!

[@diewlaylomei]

That entire kitchen layout is all sorts of fucked up. Adding and positioning the range hood where it is makes it a shitshow