Alot of new commenters and viewers watching this episode, AWESOME! If you want the full back story and engine specs, etc. Please watch the previous video on this Civic: kzbin.info/www/bejne/iKCsiZqMqaaFqbc
@hectGamer662 жыл бұрын
Awesome video and more awesome project you guys do. I would like to one day see the budget version of this. K swap with the lowest amount of money posssible. From engine, to mounts, to ecu and transmissions. But anyways it’s looking awesome 👏
@xxwolfgamingxx26742 жыл бұрын
Hey if y’all wanna try autozone I work there and still see a large container of aircraft remover and sometimes restock them definitely worth the try
@badaclash2 жыл бұрын
Hey guys I just emailed Pete
@anthonystanley79272 жыл бұрын
@@hectGamer66 z. Z. Z
@jdmcivilization5085 Жыл бұрын
Hello there i know this post is old and most likely you wont read my comment but i have a question bout installing a k swap onto a ek is it possible to be able to keep it automatic?
@danyo4922 жыл бұрын
Don’t understand how y’all aren’t at 1 million subs yet. You guys are awesome!
@DavidH2102 жыл бұрын
You should send them a gift basket.
@danyo4922 жыл бұрын
@@DavidH210 You are the worst
@dumbestoyster2 жыл бұрын
Canadian issues...they'd legit have an easy million if they were in Merica
@kc5102 жыл бұрын
Real gear heads are rare. A lot of technical youtube guys don’t get all the love and it’s a shame.
@JCE10NYC2 жыл бұрын
It's 1 of my favorite KZbin channels
@xKrispyx2 жыл бұрын
Best automotive channel on KZbin. Edits might not be as flashy as some others, but the expertise and on-camera personalities are second to none!
@ronan78122 жыл бұрын
I'm glad the edits aren't so flashy or quick. I love SA. I watched one KZbinr, young guy can't remember his name but, I felt like I was on mdma watching it because everything was so effing fast.
@lorollinls2 жыл бұрын
Amen! The guys on this channel are grown men with experience and skill. A lot of these other KZbinrs are kids with neither of those. They feel like they need the flashy stuff to be cool & relevant.
@mcubedx32 жыл бұрын
The price tracking 😍 That type of organization and information is a plusssssssssss
@Keyboardwarrior36932 Жыл бұрын
So the k swap started at 2800$?
@Illness.og. Жыл бұрын
@@Keyboardwarrior36932 with the cars price.
@CrossWindsPat2 жыл бұрын
awww man that EK is giving the teen inside me all kinds of feelz. I have a Zo6 and i still dream about an EK k swapped all motor beast. These days you can make 280 wheel reliably and reasonably priced. All in a 2100lbs honda. Epic...
@supers0nic772 жыл бұрын
I got k24 in my mr2 I can't wait to get it tuned
@CrossWindsPat2 жыл бұрын
@@supers0nic77 mmmhmmm that will be proper. MR so it can take real power! 450WHP on a gt30 86ar ougggghhaa!!!
@casefc3s2 жыл бұрын
I may be the exception here, but I definitely care how they perform far more than how they look xD Gotta get some FluidFilm Black on that underbody! And I don't typically get too hung up on most parts, but every single K-Tuned piece looks to be of extremely high quality. Props to a company with a high attention to detail and polish.
@estewar032 жыл бұрын
"Looks to be of extremely high quality" Looks being the operative word, it seems allot of enthusiasts are having issues w/ multiple pieces from K-tuned not being reliable/failing prematurely. It's nice that there are options out there though.
@EldePHX2 жыл бұрын
People keep sleeping on y’all’s channel. You guys deserve more subs and views 🔥🔥
@Lazirus9512 жыл бұрын
You guys are my favorite build channel by far. You explain each interesting step, but also know how to edit to keep things moving. Love it!
@asonii-74602 жыл бұрын
whenever i did my valve cover, i used Rustoleum Aircraft remover in the spray. we sell it at autozone and probably at oreily and advance too, in the paint section
@willyjameshuff2 жыл бұрын
Just remember to wear pants and long sleeves. I thought I got into some fire ants the first time I used that stuff lol
@asonii-74602 жыл бұрын
@@willyjameshuff yeah and non rubber gloves… found that out the hard way lmfao
@lucasizaguirre1002 жыл бұрын
Oreilly still sells aircraft paint remover. It’s a different part number but the old formula is still available in quarts
@breakfasteatre2 жыл бұрын
These guys are in canada
@shoua72 жыл бұрын
The new, current aircraft remover is useless, just a waste of money. One whole can and BARELY any paint came off my valve cover.
@madmouseism2 жыл бұрын
I used SmartStrip advanced paint remover to do my valve cover, and while not as effective as aircraft paint remover, it is pretty decent. It's also odorless and biodegredable, so you can do it inside a garage. I found it at Rona for about 30$
@BradOnCars2 жыл бұрын
Hey guys! FYI I did the valve cover on my own "ass2000" last year and I stripped it with "Dominion Sure Seal High Strength Paint Stripper." I'm Canadian too and grabbed it at the local crappy tire. In the body shop section. Worked perfectly. Probably took some days off my life but it was very fast! Keep up the great videos!
@superdude1759 Жыл бұрын
So, I’m an aircraft mech and here’s what you can do to strip that thing in 10 minutes. Invest in a media/grit blaster which you may already have and run plastic beads through it. It will take off all of the paint and primer leaving the metal and even its conversion coating undisturbed. Plastic media is used on aluminum alloy and of course anything harder. It’s not as good for thorough corrosion removal but will remove some.
@bill4639Ай бұрын
You can get a blasting cabinet and everything else you need from Harbor Freight for about $300. You can get media at Harbor Freight, but I use blasting sand from Home Depot and the finish it leaves on the metal gives you PERFECT paint adhesion. 2 steps: 1) Sand blast any piece of dirty metal 2) Paint. I sand blast everything now.
@feralstripes19192 жыл бұрын
11:05 Just a heads up, please don't wear any gloves when you are using power tools like a drill press, wearing gloves is very dangerous & your hand can easily get caught inside the spinning drill press. (this happened to the guy on American chopper)
@matthewpham2 жыл бұрын
First thing we got taught in the workshop was to wear cotton drill overalls, and not to wear gloves or jewellery when on rotating machinery
@Tino2o92 жыл бұрын
No hoodies with strings or anything
@cooki3cutt3r135 ай бұрын
literally that is my greatest fear when using a drill press.
@grant69852 жыл бұрын
K is the way! (I've got a k24 swapped ej1. Love it!)
@johndegroot74842 жыл бұрын
That old air craft stripper was insane lol spray it and before you were even done it would be all bubbling up. Miss that stuff
@Dirtyz12342 жыл бұрын
Gets super spicy if you cover it with plastic sheeting 😂
@brayanzuniga11 Жыл бұрын
Okay so here’s thing about the newer paint strippers. You have to apply it liberally but not too liberally. Think of a Krispy Kreme glazed doughnut. THEN, you have to drape a plastic bag on it and tap it on so it makes contact with every treated surface. It’s not the same as the good stuff but it’s the closest you will get. Good luck with all future projects, you’ve earned my sub.
@josephmatuszak38552 жыл бұрын
I don't usually chemically strip stuff if I dont have to. Instead I use a combo of bead blasting and walnut shell, and I have a lot of different scotch brite looking wheels I use to finish. For valve covers it's super easy. I just cut out some plyboard and use threaded rods thru to plug/fasten to the board. Makes it easy to see/move without blasting inside it.
@thinkskater36952 жыл бұрын
GLAD TO SEE YOU GUYS DOIN HONDA THANGS
@papalasagna2 жыл бұрын
Extra thanks for the mention about the Puhn’s Brake Handbook, I’m always learning from you guys and it looks like this will be worth the read!
@Genno1012 Жыл бұрын
I just bought my ek hatch back from a friend that I used to own in 2007. It’s been sitting in a barn for 9 years can’t wait to get into restoring it. He’s also got a del sol si sitting for 10 years in a garage totally stock and great condition for a 1995. Would be cool to see you guys do a del sol.
@g-mane74972 жыл бұрын
That scene with Pete putting on parts. Soo relaxing to watching with that badass smooth music. Lol
@mutevibesgaming86162 жыл бұрын
i recently used brake-fluid DOT3- to strip metal parts from paint.. works like a charm. use a brush to get in on, wait for an hour, scrape it off, done!
@robevans9162 жыл бұрын
Aircraft remover is still sold In the US all over the place. I got some from O’Reilly’s the other day, but MAN is it expensive! It’s nearly $80/gal now. Sucks when you need lots of it for things like wheels. Aircraft remover also makes a spray can that works really well too for smaller projects. My advice is to make a little vat and ‘dip’ the valve cover in it for about 30-45min and the paint falls right off.
@chrisboboshears2 жыл бұрын
Great video! Putting the description and prices in is a game changer!
@JohnsonMac2 жыл бұрын
I have the Honed Booster delete in my FD and love it!! You won't be disappointed
@davidvillalobos8807 Жыл бұрын
Not sure if anyone has said it but I’ve had great success stripping paint from aluminum boats using oven cleaner works great!
@BRICKHOUSESPL2 жыл бұрын
Oh man, that parts bolting-on segment was so satisfying. It's crazy how dialed K swaps are now. What an awesome home mechanic swap...still rooting for the ITR though! 😂
@kw25192 жыл бұрын
I think I may take the dive pretty soon. What’s the easiest civic to do the swap in?
@BRICKHOUSESPL2 жыл бұрын
@@kw2519haven't done it but when looking into it, EG seems easier otherwise you need to use a DC Integra (or EG?) front subframe in an EK. Someone might correct me but that's where my research led and I think this EK already had the subframe swapped since it used to be K swapped.
@kw25192 жыл бұрын
@@BRICKHOUSESPL ok so basically you need to make sure you have the right subframe for the mounts and stuff. Arent EG’s getting hard to find? I think EK is everywhere and cheap, so then I wouldn’t need a subframe swap. I’m honestly just looking at this as a fun way to fuck with Honda after decades with VW and Subaru Also, thank you for the info
@BRICKHOUSESPL2 жыл бұрын
@@kw2519 depending where you are in the world finding a clean EG might be pretty hard these days. EK too if you're in the Midwest (America). Haha. But yeah, EK chassis + EG/DC subframe and you'll be off to the races with a fun project. I'm in the same boat of just getting into Hondas this past year after decades of Nissans. My DC2 "restoration" is on my channel - super easy to work on chassis and the community has been great. I'd recommend it for sure.
@breakfastislife56672 жыл бұрын
You guys are so lucky to be able to do what u do. I can’t even afford a car rn with everything going
@atrip9052 Жыл бұрын
Used Cars is out there that is still budget friendly. I just got a civic for 2k that needs just an oil change. Good daily
@braxtonhughes2880 Жыл бұрын
Not luck it’s hard work,You’ll get there just keep at it don’t give up boss
@GarzaGoose5 ай бұрын
@@braxtonhughes2880Bullshit, it's definitely luck. Some people out there have nothing but hardships from birth to death. I feel bad for some of them.
@braxtonhughes28805 ай бұрын
@@GarzaGoose ahhh I started from nothing and worked my way up , like I said anyone can work they way up with motivation and time
@brianfaherty312 жыл бұрын
Brake Fluid eats paint like nobody’s buisness. For cleaning the aluminum Easyoff Oven cleaner works amazing.
@tightfitfab2 жыл бұрын
Dupli-Color makes a really good paint stripper. At first I tried using aircraft stripper but it didn't do anything on my valve cover. Once I used Dupli-Colors paint stripper it started working immediately. That's what I would recommend!
@KeanF842 жыл бұрын
Stoked on the Honda content! Im in Nova Scotia and bought a 97 kswapped ITR from a guy in Richmond Hill Ont 6 years ago, still has the original kswap that was done in 2008-9. It has hasport mounts with no serial numbers ( I confirmed with them so you know it was done long ago) and the wiring is a mess BUT it still works perfectly. If it aint broke dont fix it.. I guess 🤣. Anyway this build series may finally give me the ambition to clean my car up a bit. 🙏🏻
@Tuned_hondagapper Жыл бұрын
Depending on what type of paint it is but I like using the red USA brake cleaner, making sure it's the red cap made in the US, or it won't have chlorine in it.
@Coop442s Жыл бұрын
Great work! Found y’all through my suggested videos, instant subscribe. One bit of advice, when your using a drill press wouldn’t advise wearing gloves while it’s running. See many people get their hands/fingers tore up when the bit catches the gloves and pulls it in.
@luislozano15132 жыл бұрын
Performance > looks for me. So glad the KZbin algorithms threw me this series. Loving it so far and already subbed 🙌🏼
@brandon_buildsDIY2 жыл бұрын
Speed academy Dustin Williams Zosh Gears and gasoline You guys deserve wayyyy more subs, the work you guys put in is just unreal.
@frankooo8052 жыл бұрын
Quality content as always
@errowjezzy2 жыл бұрын
just wanna say i love when you guys do honda stuff!! big fan keep it up gentleman
@Fun1stSafety2nd2 жыл бұрын
If your guys are planning to keep the stock injectors, have you thought about sending them out to get cleaned/balanced? I’ve used rc engineering but there’s probably something more local-ish for you guys. Any used car/engine I do it and it always makes the engine run way better and it’s only about $100 for 4 inj, full printout of cc’s and spray pattern before and after.
@c0c0asauce2 жыл бұрын
One thing with paint stripper, you need to remove oils and scuff the surface before you use it.
@davidpac42 жыл бұрын
that’s why aircraft remover was the way. You’ll just spray it lol
@c0c0asauce2 жыл бұрын
@@davidpac4 I have used it a lot and I have a brand new unopened can in my hands right now. The instructions do not require surface prep but paint stripper does not strip oil and scuffing the surface increases the contact area. Also the quart tin was/is a way better deal than the spray can.
@alexelrod2422 жыл бұрын
Doesn't really matter since they reformulated the stripper because a chemical was outlawed for sale to the general public, you now need a license to order the stripper for powder coat. It's called B17
@c0c0asauce2 жыл бұрын
@@alexelrod242 Ah, ty for the info.
@LUCKY7SOCIETY2 жыл бұрын
You can actually still get aircraft remover in a brush-on form from Walmart, just got some a couple of weeks ago. Its in the paint/automotive section of the store
@spencersgarage2 жыл бұрын
Fun fact: you don’t HAVE to use a heat gun on the VHT wrinkle paint. Yes it will speed up the wrinkle, but it is not necessary. Personally, I think the wrinkle comes out better WITHOUT the heat gun. I’ve done it that way three times with great results! Be patient. Give it 24 hours to dry/wait for the wrinkle to form naturally.
@bgee4612 жыл бұрын
A stock master cylinder on all 96-00 hatchbacks and all dx, lx non abs coupes and sedans is a 13/16. 7/8 is off a Canadian si usdm ex model. 15/16 is off Canadian SiR and usdm Si. Integra had up to 1" options but integra boosters are also needed.
@bandwagon2402 жыл бұрын
If you sand the surface of whatever you want to strip with 400-600 grit, it helps give even the cheapo stuff a bit more of a chance to work.
@dakavanagh2 жыл бұрын
why not vapor honing the valve cover? Seems like a great way to get that cleaned up!
@slickman59692 жыл бұрын
my thought as well
@alexelrod2422 жыл бұрын
Takes way too long and is high risk for having media go through the engine
@MidnightMiata2 жыл бұрын
A good alternative paint stripper I've found is some stuff called "Citristrip". Doesn't have any toxic smells and it actually strips paint really well.
@infidel3352 жыл бұрын
DOT 3 brake fluid does a great job stripping motorcycle tank paint when you spill it during a fluid flush...
@Caped.Customs2 жыл бұрын
This channel and donut media are by far my favorite channels right now
@djbriantalbot2 жыл бұрын
the build, the shop, and the production all get top marks! wow.
@fish.sleep.repeatproductio55242 жыл бұрын
Painted my valve cover last week and picked up some of that aircraft stripper at my local store so its still available
@Tactical_Pterodactyl_Knives2 жыл бұрын
All these super/ high end cars and I came to the channel for the Honda build off.
@sieve52 жыл бұрын
I love this kind of content where you show each step, but quickly. Looks great on my end.
@kc5102 жыл бұрын
I need a project garage so bad! Love watching you guys.
@TABRO2842 жыл бұрын
Same here
@mattcarbaugh5576 Жыл бұрын
You guys hit the nail on the head in regards to certain chemicals that made paint stripper of the past very effective recently being outlawed. But consider also that honda uses a very high quality, chemical resistant coating on their valve covers... I usually glass bead them first, then use 2 or 3 treatments of paint remover and scraping and media blast again. Repeat if necessary. That coating is tough! 😂
@yay8422 жыл бұрын
God, the paint is absolutely beautiful
@juiceboxsteez2 жыл бұрын
Bookmarked for future PT inspired K-Swap project.
@mar23816 ай бұрын
For the valve cover stripping get some gum cutter or use some brake fluid apply and let it sit then power wash it.
@rustyshackleford816 ай бұрын
You gotta put the paint stripper and valve cover inside a bag so it doesn't evaporate, same concept of wrapping paint rollers/ brushes overnight if your not finished painting.
@ToogiDesign2 жыл бұрын
Yessss Honda content all day, boys!!!! Can’t wait to hear these things rip on the track. I hope we get a ton of driving videos on these two cars!!!
@Freemananana2 жыл бұрын
Rust-Oleum in a gallon paint stripper. I use it all the time. Not the spray, the gel goop stuff. Paint it on with a brush.
@noahvelasquez2232 жыл бұрын
Keep up the good work! Love the K swap, I personally have stuck to k series so I'm really looking forward to the B series build!
@dannygarcia34176 ай бұрын
Im subscribing because I have a plan for two special people to me that I wanna build some cars for, so I hope you guys are recording everything yall doing for this swap😂🤞🏽
@captainsledge75548 ай бұрын
To chemically strip it.. I get the gel aircraft remover and soak it, then put it in a plastic trash bag. Then it keeps it wet and eating that paint. Usually strips anything clean in 15 minutes give or take
@BigMike862 жыл бұрын
Ive got a 9th gen si (car in my profile pic) that i wish had a k20 head. Ive got the k24z7 already and a lsd 6 speed with full bolt ons and dyno tuned on hondata. I would love if you guys did an all motor build series on my car and did a k20 head swap and maybe a different clutch to hold the power. Man a guy can wish right??? I would give u guys full rights to do what ever u wanted and all the time you needed. You guys rock!!
@ItzSath2 жыл бұрын
I always love to see a car that is well taken care of, both how well it is presented and maintained!
@YungEarl1 Жыл бұрын
You can’t strip powder coating with paint stripper. Try putting it in an oven and then scraping it off. Alternatively you can sand blast it away.
@TwisNinja Жыл бұрын
the valvetrain is a good reference to care taken on the engine however the crankcase is where you really find out with the k series being 22 years old now and common head gasket failures,.. I wouldnt be suprised if the head has been cleaned/machined or replaced if it were running Mobil1 its whole life you'd swear it was a brand new engine when you opened it
@SHWELL112 жыл бұрын
Enjoying the series, thanks for sharing guys!!
@MalayKim2 жыл бұрын
Can't wait to see this monster on the road! Just from personal experience, I'd swap the Hondata plastic IM gasket for an OEM metal one. Those plastic ones tend to crack.
@StingrayOfficial2 жыл бұрын
My experience with paint stripper, heat has a lot to do with it. Pre-heating the part and keeping it warm helps the chemical reaction. But yeah, the old Aircraft Paint Remover stuff was pretty gnarly, worked really well, RIP.
@mikepao61092 жыл бұрын
I used CRC gasket remover from my local napa to strip my 2JZ valve covers, they worked very well after two passes
@alexelrod2422 жыл бұрын
I've tried it, it won't dissolve Hondas powder coat, you need B17, which needs a license to order
@aray4933 ай бұрын
The retail paint stripper works much better if you spray it on super heavy then wrap it up in a trash bag so it doesn't evaporate out as fast. Do all my valve covers with it
@josephgermany74462 жыл бұрын
Yeah, to give a little more info on that aircraft paint stripper for you guys: the chemical is called MEK(butanone) and the reason it's hard to get is because it's HIGHLY CARCINOGENIC! We used that stuff in the navy back in the day, and even then we had to wear a TON of PPE. There isn't just a possibility of you getting cancer, just the question of "when" you'll get it. If you breathe it in for longer than like 2 minutes without any respiratory protection, you're at high risk. Yeah, it wrinkles paint up pretty quick, but it isn't worth all the risk involved in using it.
@JP-gd1ln2 жыл бұрын
Klean Strip, premium stripper, "removes paint epoxy polyurethane from metal wood & masonry" patent pending just used last night after same situation no more aircraft stripper available and to my surprise it worked like a charm might only be on shelf in the states though I'd bet you can get it shipped online
@xozindustries74512 жыл бұрын
Eastwood used to sell some pink stuff that stripped paint like crazy, and it wasn’t as toxic as aircraft paint remover
@officernate44602 жыл бұрын
thank god we are back into some cool cheap cars on big builds =) not a fan of the legend builds with so many unrealistic prices now and days......love the channel thou keep it up.
@baxlife3342 жыл бұрын
This inspires me to want to do this myself with near zero car experience, but all aircraft engines.
@IndiSkyz2 жыл бұрын
Aircraft stripper is still available in the states. It's available pretty much everywhere. I always degrease and clean the parts I'm gonna strip first so it can work better.
@revolutionday12 жыл бұрын
I've noticed that when PT is doing something like say....tearing down an engine etc., he goes into a Zen-like trance, whereas Dave becomes locked-in and laser-focused.
@AnotherRalllyRedX2 жыл бұрын
Hey guys I’m still watching the episode but I figure I’d let you know about safe n’ easy paint stripper gel. I’ve been using it and it pulls paint off really well and I got a bottle for 12 bucks. You’ll have to use a brush but seems to work extremely well! Hope that helps. Keep up the awesome videos!
@justinrodriguez16642 жыл бұрын
Name?
@Syn02032 жыл бұрын
sup justin
@frostedbuds Жыл бұрын
You didn’t even say the name 😭
@Noone-bl4wn2 жыл бұрын
On my eg8 I used Klean Strip Premium Stripper stuff works great cleaned my whole engine bay in 2 coats and extra tip at the end you could use a wheel brush might make a mess but I had plastic up!! 👍
@TheNewNoise72 жыл бұрын
Wish ek hatches weren’t so darn expensive in this marketplace. Would love to do this!
@coqui88612 жыл бұрын
You won a lifetime subscriber for this video 👍🏽
@kpkelsey62 жыл бұрын
I used aircraft stripper and it didn’t do anything. The jasco worked flawlessly for me. It was on a set of TRD factory powder coated wheels too, which is tough as nails.
@Richie_RHD2 жыл бұрын
I'm team k. But that type r is just a legend and a reason my eyes turned towards honda in the early 2000s. But I do own a turbo k eg that is also charcoal Grey. So naturally. I'm team ek-k
@phillipgargus78132 жыл бұрын
Aircraft ultra paint stripper is still available. Even some parts stores carry it I've used brake cleaner in a pinch as well
@Kr8zyVids2 жыл бұрын
Great work!! It’s about all of it, the build, how they look and how they perform. We all strive for the show and go just maybe without all the chrome lol
@TropicalDepression1382 жыл бұрын
Dustless Blasting/Wet Blasting is the ticket and affordable for a part of that size.
@TuOsitoDemonio Жыл бұрын
On that stripper it might help if you wrap it with Automotive plastic wrap! Aircraft is still available but it isn't what it used to be which is sad, when the reps came to the shop they told us we need to tell people to wrap it with the plastic wrap and let it sit for an hour, will work better but not like before
@johnu8082 жыл бұрын
Still my favorite channel!!!
@jhol76542 жыл бұрын
Dot3 brake fluid is a good paint stripper. Takes awhile, but works.
@Killerconceptz2 жыл бұрын
Im always surprised how much room you have when you kswap a large displacement in these, just blows my mind. In the future I will turbo kswap my em2, maybe awd :)
@parkbran0972 жыл бұрын
I just k swapped my em2 and it’s a lot tighter in the em2 chassis I’ll tell you that much lol
@j.barrett94242 жыл бұрын
I can finally start watching this channel again
@austin_94gt182 жыл бұрын
They have a paint stripper at Walmart that comes in those tall square aluminum containers like Acetone that you could try. Worked well for me.
@jasonkubitz94102 жыл бұрын
💯 Your comment about appearance vs performance lol. Side note, I inherited a 2008 Honda Accord w/auto trans and I'm wanting to put that motor in an early 90's hatchback. Like an EG or something. I've never messed with these things so I'm following for sure 🤙
@ashleyedmonds4523 Жыл бұрын
It's all about performance my friend all about it
@a9five2 ай бұрын
Heck yeah 👍🏼 I can't wait to drop $30k on my Honda! 🤞🏼
@2JDeez2 жыл бұрын
Napa in canada sells the real paint stripper that actually works. Usually we are stricter than the usa on safety because we dont believe in freedom, so id be shocked if you cant get it. No retail stores will sell it due to liability, but you can buy it at napa as a professional... even if youre not lol. Fair warning, it will kill you very quick without proper ventilation. It evaporates extremely quick into a death cloud. I paint it on and wrap in plastic so it has time to work.
@pinkstars2185 Жыл бұрын
I think I've watched this series 4 times. Here I go again
@dannyb19792 жыл бұрын
Great work... 👌🏼 Oh; Nitromors for the paint stripping and IMO; if the cars an EK; it should only be an EK9 CTR with the B16B 😉 Miss mine so much; even though i'm a BMW guy now; the EK9 will always have a very special place in my heart ❤
@siccamade51502 жыл бұрын
Just bought some "aircraft remover" from autozone down here in california. Stripped paint off all my old diesel engine parts in minutes.