In this video, we show the various types and sizes of speaker foam edges that are available for speaker repairs.
Пікірлер: 26
@bshingledecker11 жыл бұрын
There is no easier or cheaper way to double the life of your speakers. I am a repeat customer, and have nothing but praise for this product. Thanks for being there.
@E3693E11 жыл бұрын
I just used one of your surround kits to repair my Cerwin Vega D 5-E's. They work and sound great and the kit was good quality. Thank you so much!
@bobflabetich35377 жыл бұрын
A great solution to an otherwise expensive problem!
@broderperdurabo10 жыл бұрын
Great video by the way.
@JoshuasRecordings9 жыл бұрын
I used the Mach kit for my Mach 3s. Sounds like new! I also got the 12" for my Pioneer CS-G9900, they also sound new! It is not that hard to refoam speakers, not as hard as I thought.
@MarkAhriman11 жыл бұрын
Thanks for the great info......Mr. Mackey mmmmm kay.
@bigd8353 ай бұрын
make sure you understand whether you need a flat attach surround or an angle attach surround. all the low budget sellers on ebay will sell you a flat attach surround, while telling you it will fit an angle attach speaker. you cant get a flat attach foam to lay flat on an angle cone.
@simplyspeakers12 жыл бұрын
The Kenwood Trio series speakers are angle attach.
@stephenlam45295 жыл бұрын
Please advise for right size ... Have a pair of Altec Lansing Model Nine Serious ll , require refoaming on 12 inches woofers and midranges 4 and half ? Look forward to hear from you before ordering, thanks !
@simplyspeakers5 жыл бұрын
See woofer kit # FSK-12Altec and mid range kit # FSk-4.5B. You can also use the search box on the website and enter 'Altec model 9" to see results for the kits. Thanks!
@davidwaits96857 жыл бұрын
Looking to replace my surrounds on my Boston HD8 and HD5's...would like to know if you offer rubber surrounds v/s foam or if I can do rubber surrounds. Factory was foam but wanna do rubber to last longer, and plus much easier on the eye. Any help is appreciated. Thank you
@simplyspeakers7 жыл бұрын
These are available in foam only. The new formula is much better and lasts much longer too! See our website.
@rancosteel12 жыл бұрын
How about butyl surrounds and mesh dustcaps that don't make contact with the cone? The vintage German and CTS drivers employed these features. The mesh dustcaps aid in preventing linearity problems with the cones. Butyl last long and has better elasticity. Most manufacturers don't use butyl due to the cost of natural rubber so they opt for cheap foam instead. Do you sell these options?
@erekcox54973 ай бұрын
Can you get 8 jl w0 foam
@SangalDigital12 жыл бұрын
cool
@simplyspeakers12 жыл бұрын
We have some new surround options in rubber coming soon. Keep an eye on our website for details!
@f430ferrari53 жыл бұрын
Bought one of your kits. I’m trying to remove the subwoofer and despite removing all the screws the subwoofer is stuck on. Gave a pretty good yank. Any tips to remove? M&K sub. Thanks
@mackomodunbi906310 ай бұрын
Please I am look for the size of RS 8 Kappa 12" woofer Dust cap
@simplyspeakers10 ай бұрын
Order dust cap part # DC-4.3inf here: www.simplyspeakers.com/speaker-dust-cap-infinity-logo-dc-4.3inf.html
@snowyrain5730 Жыл бұрын
I need an angle-attach for my drivers but can only find the correct size in flat-attach. Does anyone know a trick to get that inside edge to glue down flat on the angle? I read someone used a small kitchen bowl to force it down... but I'm thinking you'll end up with an uneven lumpy looking surround. ?
@simplyspeakers Жыл бұрын
The adhesive we include with our kits is aggressive enough to do this without clamping. You will need to work the foam down to meet the angle of the cone manually several times and babysit it while the glue cures. It is not as difficult as it sounds. You can do it!
@snowyrain5730 Жыл бұрын
@@simplyspeakers I know I CAN do it. I just would rather avoid the pain in my ass. Lol
@jirismanns90493 жыл бұрын
How do I get in contact with you guys
@simplyspeakers3 жыл бұрын
Go to www.SimplySpeakers.com and click the "contact us" link