2011 5.3 33k miles 6l80 trans 228r spike custom grind cam Air intake 4.10 gears Caltracs Longtubes 1 7/8 True dual with x pipe
Пікірлер: 84
@boxnshocks62387 жыл бұрын
Fuck yeah this sounds so good!
@TahoeSteve7 жыл бұрын
Cam specs?
@4motive5517 жыл бұрын
nice truck! cam sounds sick! i have the speed engineering xpipe and mufflers on my truck, couldnt stand the turn downs though. i added tail pipes to my truck.
@peltshunta97303 жыл бұрын
How’s she sound
@bmac93173 жыл бұрын
What’s the full exhaust set up? Just headers and x pipe no cats? And muffler wise?
@AztecWarrior5957 жыл бұрын
would the muffler fit my 2000 Suburban
@duaneweathersby96203 жыл бұрын
Hope you had better luck than me. Sounds good at idle and WOT but absolutely crap under cruised loads…… so raspy I’m embarrassed to drive it.
@CarelessKinq2 жыл бұрын
Ive heard the drone is pretty badd
@dominickguerra1897 жыл бұрын
Same sound i remember the first time i turned my keys after installing them bad bitches!
@otrhi78367 жыл бұрын
Aaand sold that shit is gonna be nasty on my 6.2
@josejaimes27755 жыл бұрын
How are the headers holding up and do they still have the Polish look to them ?
@MartinAguilar213 Жыл бұрын
Nice truck
@chrishunter98036 жыл бұрын
Nasty sounding truck I think I seen u around in Houston be for??
@benitazer7 жыл бұрын
Niice !how the fitment of the headers? Do you recommend them?
@Slick_Rick7 жыл бұрын
benitazer fit right in used all the oem hangers no fabrication needed
@hooknontheweekends12365 жыл бұрын
Did you us an x pipe?
@chrishunter98036 жыл бұрын
I want this badss truck
@amanciosalas247 жыл бұрын
What size lowering kit does it have ?
@Slick_Rick7 жыл бұрын
amancio salas its a 4/7 drop by djm and i added lowering shackles
@ricardogalvan8836 жыл бұрын
What size are you wheels bro they look sweet
@Slick_Rick6 жыл бұрын
Ricardo Galvan thanks...they are 22s 285/35 all around. ill be uploading another video with my drag setup and stall converter uupgrade.
@lukesworld28643 жыл бұрын
Do you get any drone with the axle dumps? I'm torn between those and the full length version
@hooper89357 жыл бұрын
I want that cam. What is it PLEASE!
@Slick_Rick6 жыл бұрын
Hooper_c4 spike 228r visit spikeperformance.com
@azzamalmutlaq93106 жыл бұрын
Cam sound!
@omarvilla4344 жыл бұрын
Probably won’t see this but if you do, did you have a lot of interior drone with this set up? I want to get the Axle dump kit
@jaimesoto75js7 жыл бұрын
What drop doses it have?
@Slick_Rick7 жыл бұрын
Jaime Soto it's a djm supension. Its a 4/8 control arms for front and flip kit with drop shackles on rear. didn't want to c notch frame at the time because it was 6 months after i bought the truck.....so used drop shocks or air shocks for bump stop clearance.
@fastaSSalex7 жыл бұрын
clean truck
@Nightakula7 жыл бұрын
Soooooo badass
@SCwrestlerTTSB4 жыл бұрын
Any issues burning wires or anything since the headers arent wrapped?
@xGoons412x3 жыл бұрын
Is it too loud bro? Does it drone?
@cbr1thou5 жыл бұрын
Nice drums
@Slick_Rick5 жыл бұрын
Extra 10 hp
@JuanMartinez-hw5gt7 жыл бұрын
what’s that long bar connected to your shackles? & why you change your spark plug wires? badass chevy btw 👍🏻
@Slick_Rick7 жыл бұрын
Juan Martinez they are traction bars. to reduce wheel hop and better hook up to the street or strip. i changed wired because they are a bit longer for clearance with headers.
@JuanMartinez-hw5gt7 жыл бұрын
yzfr12007rc where did you get the spark plug wires?
@vanrichardson21026 жыл бұрын
Juan Martinez are they the wires speed engineering has also and if so how well do they work?
@v.e.72366 жыл бұрын
Yawn!!!
@Slick_Rick5 жыл бұрын
It's a lullaby....I know
@petersrightbut82976 жыл бұрын
seriously, bad ass.
@streetslayinggto25056 жыл бұрын
What is the exhaust? Are they slp?
@elprostipirugolfo81765 жыл бұрын
Do you daily drive it? How does it do?
@dereklane52316 жыл бұрын
Beautiful Beast lad!!! Sounds Sweeet...Looks great too... Love It!!!!!
@theedster80817 жыл бұрын
Looking badass bro!
@Slick_Rick7 жыл бұрын
The Edster thank you!!!
@justinchaidez6456 жыл бұрын
What mufflers you have?
@ImChench6 жыл бұрын
Out of the headers out there why you go with Speed Engineering? I'm looking for headers but don't want to spend 1k+ for Kooks but these seem pretty cheap and I'm on the fence about buying them.
@Slick_Rick6 жыл бұрын
King-Almond i felt the same way....i took a chance and they are worth it....i get so many compliments in the streets about the sound. sounds way better at WOT. i purchased the longtubes 1 7/8 and the dual set with x pipe
@ImChench6 жыл бұрын
yzfr12007rc speed engineering is a local shop but $300 for some LT is pretty cheap. Might have to do more digging on them
@Slick_Rick6 жыл бұрын
King-Almond help it works out bro
@ImChench6 жыл бұрын
yzfr12007rc no leaks from them? How was the fit and finish?
@Slick_Rick6 жыл бұрын
King-Almond no leaks on mine although the clamps look kinda (thin)cheap....i would suggest getting better clamps just to be safe. the welds on headers look good and as far as fitment it takes a and hour or two if ur doing it on ur own. exhaust hangers match up to oem
@darrenairey59383 жыл бұрын
Lol rear brake drums tho! 🤣
@ricardoz.67016 жыл бұрын
Silverado farts
@jakekrag41535 жыл бұрын
What are the specs on your cam??
@bknoxx4 жыл бұрын
Sounds clean.. 🤘💪
@gocart094 жыл бұрын
Sound good dude 👌
@chivilogarza6536 жыл бұрын
cuanto ta dropped la troka?
@Slick_Rick6 жыл бұрын
Chivilo Garza 4/7 drop DJM suspension
@bogey190186 жыл бұрын
I would like that setup with quieter exhaust.
@lsxjosh42176 жыл бұрын
bogey19018 whats the point of doing a full exauhst set up and long tube headers then?
@davetomak32127 жыл бұрын
What's the specs on this cam if you're u don't mind me asking? Stock stall? How's it drive?
@Slick_Rick7 жыл бұрын
its a 228/228 duration with 588/588 lift at 112 lobe seperation. truck feels good pulls well on highway but do recommend a stall. it doesnt turn off on me but u can feel a loss in vacuum when u brake.
@HoustonRocket2816 жыл бұрын
yzfr12007rc get yourself a vacuum brake booster that helps . I have a GMC Sierra cam with stock stall that helps a lot .
@julianw.55687 жыл бұрын
Engine mods?
@Slick_Rick7 жыл бұрын
Julian Wilcox its a 5.3 with a 228 custom grind cam by spike performance and a cold air motor only has 33k
@jwl410857 жыл бұрын
Mufflers??
@Slick_Rick7 жыл бұрын
jesse lee they are also by speed engineering. you have the option to choose y pipe or true duals with x pipe
@ct13215 жыл бұрын
What us the wheel setup on those tbss wheels offset and backspace?
@blakehorn40176 жыл бұрын
Hey man im just curious if your running performance cats or if your catless and if you tuned it to delete the cats and o2 sensors because im looking into buying a set up similiar to this but i would like to put high performance cats back on it. Thank you and nice truck
@sunzoutgunzout88876 жыл бұрын
eww dumps
@sebastiansantiago35527 жыл бұрын
are the speed engineering headers good ?
@Slick_Rick7 жыл бұрын
Sebastian Santiago yeah so far so good didnt have a hard time going in
@adamtx2146 жыл бұрын
@@Slick_Rick how they holding up so far?
@Slick_Rick6 жыл бұрын
@@adamtx214 so far so good....haven't had any problems