Customizing a GAN 11 M Pro like a PRO!

[@raystrangeuwu]

Great video, now all I need is a gan 11 m pro

[@jude3220]

Same man...

[@nourganouni]

Same...

[@justaregularhumanbeing]

Ya same

[@ThePuzzleTurner]

Lmaoo

[@cuberchez818]

yeah same

[@bubbaboi2332]

The gan 11 m pro looks awesome with black internals

[@RealNaoh]

Agreed.

[@jacksoncuber8626]

Yes

[@bubbaboi2332]

@Rafael Mendez nice

[@Toletanus]

Mine is black internal too.

[@christhecreative210]

Mine is black internal to

[@elisabethherzog9369]

This was my first Gan so I was a little frightened to do anything to the tensioning and such but I totally understand now, thank you! I also apparently overlooked the fact that I could change the corner magnets so that was good to know.

[@Suni_C0W]

hhhm funny this is also my first gan

[@query25]

Same too!

[@apollo11capcom39]

The 3 position switches on the corner pieces adjust how far out, or close, the triangle or hexagon internal magnets sit in relation to the core magnets. So essentially you have 6 settings for your turning magnet strength, how hard and sharp it snaps into position when completing a turn.

[@TesserId]

I tried the full range of limit and tension settings from the tightest to the loosest. It's still super stable at the loosest setting and not very squishy at all, though there will be an occasional floppy snap, which I decided I didn't need. The other end of the spectrum is also excellent. Despite the graph in the documentation, corner cutting doesn't get significantly reduced until a limit setting of one (at least for my tastes). Again it's super stable at the loosest setting, but it made perfect sense to go with the tightest limit setting that was comfortable on the corner cutting; and for me that was 2, though 3 is great too. From there, I adjusted tension to taste (second click/step three [however you prefer to count]). What a great cube.

[@javierthenoob4456]

I can’t even pop out the Center without me thinking that my Gan 11 M pro is gonna break

[@aanaishapoddar]

Exactly I just opened mine today!

[@thorbenmaas7848]

Same

[@underio]

@@thorbenmaas7848 same

[@Evotionn]

I went to order it but when i used the discount code and payed i remembered i am broke

[@sochaky5762]

Me too

[@muktamondal7254]

One cube, four versions, insane customizability, great performance .... what could you ask for better than that.

[@gauthamgopinath3362]

Great price.....

[@muktamondal7254]

Should've added except for that

[@pll__skip]

Now 5 version, coz they added the sticker

[@etfoltz]

less catching lol

[@Ultra23Ahan]

gan 13

[@tommycotter8260]

I’ve had this cube for over a year now and only just learned how to properly customise it so thanks a lot!

[@pcniv]

3:58 isn't it 2 and 4 on the dark blue

[@AlejandroVillate832]

Yes

[@ausy1356]

Ahahahah

[@Fatigue-Lost_AirBassist]

Just what I wanted, the smallest commercially available flathead screwdriver! Thanks for the guide, SCS. I won this cube as my first GAN Cube besides the 354 v1 with no nuts (I wont the 11m Pro from a Cubicle giveaway XD)! But this is amazing, thank you and best wishes!)

[@kevinlin4662]

My v1 was so bad the nut unscrewed itself

[@nevergonnagiveyouup4270]

Where did the UV coated gan 11 m pro gone? I was planning to save up and buy it. Pls put it back.

[@blooberry48]

gan stopped selling the us coated

[@blooberry48]

uv*

[@porglomber]

Nice! My GAN 11 M Pro (From SpeedCubeShop of course) will arive tomorrow, Can't wait to start customizing it!

[@daveendaya0077]

SCS said that my uv coated version will be delayed

[@gabryy768]

What do you think is the best lube/ lube combo for this cube?

[@tyleranderson6213]

I was messing with it and turned the tension nut clockwise and it popped and a piece came out put it back in just fine but did I mess anything up?

[@fabianreis3946]

what loosens it on the blue thing, is 1 loose or 4 loose?

[@JustARandom_Duck]

For the light blue nuts, if the number is high does it mean its tighter?

[@NYCUBING]

I ordered mine yesterday this information goona be really helpful thanks!

[@mihirmalladi8494]

My GAN 11 M Pro is coming for Christmas and i never owned a GAN cube before. Thanks for the video. It isn't that overwhelming anymore. Keep in mind, i said "that overwhelming anymore".

[@josiah7202]

4:08 How? 😯💨 By using the hextangle magnets?

[@Sheikhm007]

Really INFORMATIVE VIDEO; it was very helpful. I look forward to adjusting my coming GAN 11M PRO using the acquired knowledge from this video. Ans, I have on question. Is the DARK BLUE nut for a tighter tension or looser?

[@porglomber]

The dark blue nut has settings number 2 and 4, so basically yes, it is.

[@sarikasawhney2278]

The Floral blue has 2 settings. 1 and 3 Setting 1- Tightest very stable Setting 3-Loose. Kinda unstable Dark blue also has 2 settings 2 and 4 2-Looser than 1 but tighter than 3 and 4 4- Loosest setting. Very unstable,could pop and will corner twit easily.

[@Sheikhm007]

@@sarikasawhney2278 Thank you so much for informing.

[@Sheikhm007]

@@porglomber Thank you so much for informing.

[@dunkmanten2257]

@@Sheikhm007 thx

[@aglcubing9680]

Nice! I needed this

[@kidfineful]

Great video...but what abou the nemebers on the corner's magnets please?

[@naurthanks6122]

Thank you for this video this is my first customizable cube and this video made it less depressing

[@jacksoncuber8626]

I’m thinking about buying the GAN 11 M Pro. Should I get black or primary internals? 🤔 what are your thoughts?

[@sarikasawhney2278]

Primary

[@jacksoncuber8626]

@@sarikasawhney2278 thank you for your opinion

[@sarikasawhney2278]

@@jacksoncuber8626 do u want the reason for why I think that?

[@jacksoncuber8626]

@@sarikasawhney2278 yes

[@sarikasawhney2278]

@@jacksoncuber8626 ok. The black internals might look better but the primary internals are better for speed solving. It reacts better to lube, gives a smoother feel and overall leads to less lockup’s and fluid solves. That’s why I think that. Saying because I have an 11m black,primary and an xs. Hope I help.

[@marshalsobrero]

Do you goes only have the frosted ones in stock/ when should we expect the soft variation to be shipped?

[@Zyrilix]

never now

[@marshalsobrero]

@@Zyrilix lol I was able to get the soft variation and the uv one.

[@GorggW]

How do you deal with carpal tunnel?

[@crctornado7175]

My cube has 2 customization. Lubed and unlubed :b

[@StaticNebula26]

If it has screws, it's practically infinite

[@lennygeee]

@@StaticNebula26 obviously you don’t know, what infinity is

[@StaticNebula26]

@@lennygeee the planck length limits it to countable, so its practically infinite

[@cuberchez818]

yes

[@crctornado7175]

@@StaticNebula26 yes i noticed it

[@CANVASARTS123]

This is why tingman ranked your thumbnails as the best

[@6cosmic722]

I didn’t realise that I ordered mine a stickered cube until I got it. Is there any chance I could return it in exchange for a stickerless cube?

[@bensilashi8262]

The corner mechanism: Does it control the center-corner magnets or the corner-edge magnets? Saw some reviewers saying the one and some the other and I'm confused 🥴

[@jaydonturner2367]

It moves rhe the corner core magents it moves the magents in the corners it will change the distance from the corner from the core magnets hope this helped

[@sub-1414]

Watch Shawn from Speed Cube Review. In His Gan 11 video you can see the corner stock magnet move in and out of the corner piece when he moved the corner adjustment. Time Stamp: (4 : 10)

[@MagicalTeoSub]

Can you Lube it without breaking the adjustments that can change the corner magnet strength?

[@yogasuprayitna]

bro, in gan 11 m pro which stronger magnet triangel or hexagonal?

[@ThirdyBxx]

Hexagonal

[@krish_yt3607]

I ordered a cube from your website and I live in Sa. How long will it take to get here.

[@ultrachad5492]

I love the vid for the corner magnet strength thx

[@justarandomguy6816]

When you're removing the numerical distancing nut, is it possible for the tension to get messed up? I turned mine from the default to 4 and it keeps popping. Please help

[@anonymouscuber1055]

Hey SCS can you please tell me what are the default settings for the gan 11 m pro

[@CrasyFingers]

what about the extra set of magnets? not the triangle or hexagon ones, but some really tiny magnets that came in a plastic bag? do you replace them with the core ones or put them on top of the core ones?

[@CrasyFingers]

well here goes nothing, i'm putting them on top of the original core magnets in hope for stronger overall magnets

[@CrasyFingers]

well it didn't work, the extra magnets are obstructking the whole thing and it moves terrible

[@olleh1]

you make popping out the center cap look easy

[@fwyoboilevi]

Cameron please help I was doing the distancing but part and the hexagon thing and the plastic just popped out

[@colelacey2875]

On my 11 pro wich nuts will make it tighter. I'm on dark blue and it's to loose. I am a hard snappy turner. If the dark blues are the tightest I guess I will Dig and gav the lube it

[@ryanxu9983]

Eeeeee idk y im saying this here but my valk 2 m and my timer is comin today so im suuuper excitedd

[@christhomas6063]

did you get them yet?

[@ryanxu9983]

@@christhomas6063 lol yee

[@user-ms6sd6wh1p]

Thank you Cameron! This tutorial helped me a lot!

[@TheRealBigMacPants200]

when I try, I can't get the center cap off :( and it a little too tight to :/

[@kakaboi4373]

Uh i need help i turned the tensioning system thing clockwise and now my entire white layer came off and im panicking

[@TesserId]

0:14 "168 customization possibilities". Apologies, but I'm cursed with a computer science degree--and therefor obsessed with the correct counting of things. Correct me if I get any of this wrong, because I'm not perfect and get hung up on things that aren't relevant. But assuming that you want a symmetrical setup, there are 3 corner magnet settings, 3 core-magnet settings (including removing the magnets that interacts with the core), 4 center-travel (center-spring) limit settings (combined across the two different nuts), and 7 spring tension settings. Funny that the product documentation says there's only 6 spring tension settings. I had to pop a cover to count it correctly myself. What you do is go around until it pops. That's one, not zero. It's a classic off-by-one error. We computer science people are so silly. Anyway, allowing for 3 core magnet settings: 3 * 3 * 4 * 7 = 252.

[@geocine]

I am having a hard time removing the triangle magnets, any tips how to remove it. On the video , it looks so easy.

[@WattsieMMA]

what is the original tension

[@apollo11capcom39]

I don't understand how the center blue nut is supposed to adjust corner cutting as the only thing it seems to do is adjust the anchor point of the clear spring loaded nut. So it's just added or removing preload from the clear nut. In other words- adjusting which blue center nut you use, which setting its on, or which setting the clear spring loaded nut is on, are all doing the same thing- adjusting the tightness of the center piece.

[@louisbar111]

Great video Cameron keep up the great work!

[@JustARandom_Duck]

Difference between light blue nut and dark??

[@SpeedCubeShopOfficial]

Different levels of elasticity

[@IcyGlider]

Can someone pls tell me how to tighten cube cuz every time I play with it it just pops

[@kotori106]

What version of the Gan 11 pro is that?

[@harshitagarwal7659]

Probably the frosted one with black internals

[@jack---]

what is the deafult tension?

[@felixtritschler5096]

1:04 Doesn't each corner piece have 3 adjustments (because it has 3 "inward"-surfaces), thus totalling 24?

[@wjatek997]

No

[@michellewang2258]

thats not how it works

[@kidfineful]

I have an issue during the solve the corner's magnets changes from 1 to 2 or 2 to 3

[@speedcubesolver1195]

SCS intro is so nice...

[@brcb2]

thanks now i can easily customize this cube keep it up

[@royitaqi]

I have a question. I have it on distancing setting 4 (most distance allowed, I assume), and it still cannot corner cut 45 degrees. Is there a way I can verify why this happens?

[@ThirdyBxx]

Because the higher the number the tighter which makes it more pop resistant but less cornercutting

[@colelacey2875]

Thanks! Learn cube off the net, you r a great help

[@masonjason8819]

Even on the tightest tension setting my cube is still super loose. Anyone know what might be happening?

[@Usha_Prasanna]

try out tightening elasticity dude

[@masonjason8819]

@@Usha_Prasanna I got it figured out. Just had to break it in more

[@lisca.2000]

The cube come with what number in the tensions?

[@ivanbashmachnikov6007]

thank you! i can now fully customize it!

[@RofICopters]

hex core magnets + setting 1 on corner magnets = ideal roux set up

[@tommybaker6779]

I like changing the mangnets and putting the hex magnets but I used tweezers instead of my fingers

[@ASDCUBER]

Very very good cube

[@Spencerspeaksss]

Is this frosted or soft?

[@cuberchez818]

Alternate title : Making an unaffordable cube even more unaffordable Oh yeah, and don't forget that extra 32 dollar shipping

[@RealNaoh]

Shipping is free for me. 🤷🏻

[@sarikasawhney2278]

Idk why but my reply got deleted I said that SCS has 15$ shipping for Asia as well. And if u spend a certain amount u can get free expedited shipping. The current rate for free expedited shipping is to spend 14.5k inr.

[@sarikasawhney2278]

@Rayyan Humayun ya. In india the shipping cost is approx $14.98 for the standard shipping.

[@soullessloner4062]

@@sarikasawhney2278 You can Buy your Cubes in Cubelelo which is an Indian Based Cube Store And you can also use MACubing Discount Coupon

[@cuberchez818]

@@sarikasawhney2278 yeah like everyone has 14.5 thousand rupees right in their pockets. My 6 month school fee itself is around 12k🙄😏 I can buy a brand new cycle with 14k I think you are quite rich Aap log kabhi middle class cuber ka dard nahi samjhoge Kisi ek jamane mein hame bhangar brand cube se cubing karni padti thi! And for your 15 dollar question, we have to face 15000 questions for so much money. some common lines from our mahan parampujya matashri and pitaji: Website safe hain kya? Scam to nahi? Apan paas wale dukan mein bhi milte hain.Kyu paise waste kar raha hai? Beta, padhai kar. Ye bohot mehenga hai.(Even though I get about 100% in every exam!) Kitne cubes hai re tere paas, aur kya chahiye! (Only 6 cubes hain!) Ye itna mehenga liquid kyu le raha hain? (lube) paani use kar na! In middle class families, and even 15rupees is " *too much* " for a child (Child aging from 0-16 years!) to give! He/she might lose it, or worse, overspend it! Sirf sabji/samaan lane ke liye paise milenge! Mujhe hi pata hain, mein cubes kaise liye hain! Jaane do, Gan user kya jane YLM wale ka dard!!

[@UAF16]

I ordered mine 1 week ago, now I wont need to watch this with a meaning

[@scott_sauce]

Awesome... so helpful from a newbie. Appreciated

[@Dabi15574]

Newbie? He better than u

[@neptune364]

Geary video, really helpful :) Just a question though, are you sure that the triangular magnets are weaker? I tried them in my 11 M Pro and they seem stronger to be honest.

[@timspencer520]

Same actually

[@purplespacesnail6836]

@@timspencer520 they arent the same

[@AtelierMoulineaux]

@@purplespacesnail6836 he meant he thought the same, he didn't say they were the same.

[@willymangorsi4457]

1% people using their imagination having a GAN 11 m pro😅

[@SanjayJohnKing]

I gonna buy one it my 2nd 3x3

[@mohammedbilal3492]

My 11 m pro popped into plastic pieces on my first day you saved my life

[@sub-1414]

The magnet adjustment doesn't change the corner magnets under the plastic it only moves the corner stock magnets closer and Farther from the core magnets.

[@ifohancroft]

What happens if you accidentally turn it clockwise?

[@reeck771]

I did that and for some reason my cube only has 4 tensioning settings now and pops up after

[@adnanls]

Thank you so much Cameron! I managed to fix my gan because it almost broke.

[@Vansh_71611]

Worked very amazing

[@codyss7570]

what song is this?

[@uritaanach1377]

i got one! this is AMASING

[@Rongai_massive._]

Hey scs i want a cube be here in kenya africa can you supply one

[@Bachaop.]

Do you ship in Pakistan

[@justinvork3408]

Is there an SCS email list?

[@quakogaming4526]

AY CAMERAN MA FRWEND YAAAAAAAAA POG

[@ChaimMosheZaltsman]

U R’ the best man

[@puzzelflame3872]

Wen is the nexst story like how cameron startet scs

[@lithum2484]

i just got an XS like a week or 2 ago ;-;

[@monkiplayz3834]

Thanks it was very helpful!

[@KendrickGaspan]

I'm getting this cube

[@BrandonWong55]

The GAN 11 M Pro has 144 customization settings, not 168. The GES nuts have 6 positions, turning the nut a 7th time resets it back to the original position.

[@kiraPh1234k]

It does have 6 positions, but that means turning is a 6th time resets to original state, not 7th. 7th would be original state + 1

[@sarikasawhney2278]

Would anyone exchange a 30-40$ cube for the gan 11m pro black internal/uv coated. I don’t like the 11m pro that much.

[@donalds4506]

What’s the song in the background?

[@blooberry48]

i can't change the corners. it's so hard to twist then

[@elisabethherzog9369]

I couldn’t get them at first either. Try using a thin rag or something of the sorts so you have a better grip. Seeing how your comment is like 2 months old though I bet you already got it but just in case that’s what I had to do.

[@blooberry48]

@@elisabethherzog9369 Thanks! It worked when i just twisted the enough but this should work better

[@cubarl4130]

Next video:buying a gan 11 m pro like a pro

[@wasimakhtarnk]

Thanks cameron

[@hunterrrr_skates]

It is hard changing the magnets

[@kevinlin4662]

Use the screw driver

[@method2584]

Hey Speed Cube Shop, I have been trying to find a good setup for the Gan 356 air m, and I was wondering what SCS Lube you would recommend for that particular cube, if you have a suggestion please let know , that would definitely help me a lot 👍🏻👍🏻

[@stickmantony8243]

The Gan 11 Pro with black internals looks the same as the stickerless Gan xs actually

[@louisbar111]

Who ordered the uv coated version from shopgancube.com and still didn’t get there’s

[@Rizzstech]

The uv and soft were delayed

[@Joseph-j3s4y]

Thank you!!!

[@SpeedCubeShopOfficial]

You're welcome!

[@cameroncook7943]

Is it just me or do some of these videos look more realistic than real life

[@realTPerm]

same

[@Autoclick48]

my precious gan 11 m pro almost was like technoblade. the tensions got changed and it popped luckily im a god so i fixed it.