400$ paint job INSIDE AN INFLATABLE PAINT BOOTH

[@petterprime4199]

That Marco guy has done it again, great paint job and doesn’t hide any mistakes. Man, I’ve been following you for a few years now and by far one of my favorite automotive paint and repair channels on YT.

[@speedokoterefinishnetwork4937]

Thanks man!!

[@calvinburns6024]

This channel is so real! I love how you show me mistakes and show how to fix it!!!!

[@speedokoterefinishnetwork4937]

Appreciate it !!

[@JohnWD40TC02]

Great job Marco, this is painting in the real world with none of these state of the art air conditioned booths with downdraught extraction then a bucket load of camera filters in post production🖕🙄the finish is spot on and the colour is amazing plus you know what they say, "If you ain't getting runs then you ain't trying hard enough"😁👏👍John UK

[@speedokoterefinishnetwork4937]

Hey John! Hope all is well !

[@JohnWD40TC02]

All good here thanks Marco just waiting for the summer to start😂hope you are ok buddy👌👍

[@seanfalter9903]

I consider myself very fortunate to experience this channel like a lot of subscribers would dream of experiencing, having said that, you will not find a more no nonsense, experienced, and most of all, genuine person than Marco, hats of to you, that car is sharp! But it’s no dong Yang, well maybe 😅 👍👊💪

[@speedokoterefinishnetwork4937]

We are bros now don't forget that 😂😂😂 !!

[@NealRiggers1978]

Dude I swear I love your videos. You are so cool and I totally get your humor. I learn so much from your channel. Thanks once again!

[@speedokoterefinishnetwork4937]

Thanks for tunning in ! 😎😎😎

[@PaintSociety]

I’m starting to get chills just thinking about painting in an inflatable booth again😂 good one ! ❤

[@speedokoterefinishnetwork4937]

I WOULD TO AFTER WHAT HAPPENED!! LOL !! I'm glad we are both at the maturity to laugh at things like that 🤣🤣🤣

[@PaintSociety]

@@speedokoterefinishnetwork4937 I always walk out of that thing shaking, and it’s usually because of the overspray 🤣

[@speedokoterefinishnetwork4937]

@@PaintSociety definitely a full face respirator and throw a barrel fan Infront of the filter you will be fine 🙂🙂🙂

[@hectorastudillo2295]

Proud of you for being a great paint man !!!!RESPECT !!!!!! ❤

[@speedokoterefinishnetwork4937]

Thanks !

[@K_is_the_way]

Best painting vids out there !

[@speedokoterefinishnetwork4937]

Thanks !!!!

[@WalterB-p1p]

If your not a cheap scate and you want to do repairs correctly. Always apply an epoxy coat to bare metam before primmer filler Always tint your primer to the car color.

[@speedokoterefinishnetwork4937]

I applied etch primer to all bare metal spots . I didn't color primer but your right . Not a bad idea

[@michaelmason5136]

Yes yes yes super slick Great job

[@speedokoterefinishnetwork4937]

Thanks !🎉

[@bradthornton9572]

You make it look easier than it really is.. good job

[@speedokoterefinishnetwork4937]

It's definitely tricky !

[@angelmorales220]

Nice job Marco keep up the good work.

[@speedokoterefinishnetwork4937]

Thanks man !

[@sinformant]

I always loved those genesis coupes. Just was never in my price range. Knew a guy with a premier 3.8l 6speed manual, with just exhaust and no tune, it was pretty quick. Running him in my turbo cobalt ss on the highway it'd be pretty even till the triple digits and then id start to inch away. My car had no cats, open exhaust, cold air intake, intercooler and piping upgrade, and a canned tune so for him to hang like he did that car was putting in the work.

[@speedokoterefinishnetwork4937]

These cars are cheap to make fast . The 2.0 turbo literally 1k in bolt one and a 550$ mail on tune and your at 360hp ish

[@RCCustomRepairs]

Unfortunately Marco the haters that comment dont do the work from start to finish, they have their "body guy" they just " paint" in other words anything that goes qrong is the body guys fault. At least us real painters can value our paint jobs from start to finish. You show what all real painters go thru and don't cut anything out from your videos. Awesome stuff brother

[@speedokoterefinishnetwork4937]

Yea almost all jobs I'm hands on start to finish. I have a buddy who helps me from time to time which helps take a little of the prep stuff off me so I can put time into edits and what not .

[@kurtgood2914]

That paint looks like glass and good paint job brother

[@speedokoterefinishnetwork4937]

Thanks bud !

[@kurtgood2914]

U welcome 😊

[@kkp4297]

was there any mottling with blue metallic?

[@itzmejav995]

🎉🎉🎉🎉🎉havent watch a video long while bro here studing for EMT..and hustling that dollar hope all is well

[@itzmejav995]

🎉what's the name of the sanding machine you where using I need a new 1 mine is toast

[@speedokoterefinishnetwork4937]

Hey man!

[@itsturbinetime]

@@itzmejav995 it a battery powered brand from Harbor Freight Tools "Bauer"

[@johnnycashh7148]

Looks great...can't remember if you've done any after care vids, Waxes, wipes, etc.

[@speedokoterefinishnetwork4937]

Iv done quite a few !

[@johnnycashh7148]

@speedokoterefinishnetwork4937 yeah, I think I remember the ceramic coat one... 🤔

[@speedokoterefinishnetwork4937]

@@johnnycashh7148 yes

[@Fred_Durst1]

Marco, internet police here. I see some runs blah blah blah ppptttt. I'll be in my driveway wet sanding and buffing if you have any questions.

[@speedokoterefinishnetwork4937]

🤣🤣🤣🤣 Funny Hope all is well man

[@smithrod63]

How long have you been using that paint booth now? Are you finding it easy enough to maintain , clean and continue using? I was looking at the sewinfla ones and they looked perhaps slightly better in some regards (I think mostly ventilation and fume evacuation), although I'm not up to date on the new versus old designs. Just trying to do some KZbin homework on which ones actually ventilate properly and have decent visibility. I'd be curious. Your thoughts is a professional painter regarding the different booths you've used or different brands of inflatables.

[@speedokoterefinishnetwork4937]

@@smithrod63 for consistent use . You get about 20 uses out of them. So it's about 50 bucks per use if you want to look at it that way .

[@frankjames4054]

Marco, after watching your videos I decided to give the Speedo SMR130 a try. It dried back pretty bad a few days later, but for cheap stuff it’s okay…question for you…how does your work look after a month or so? Does the clear hold up okay for you?

[@speedokoterefinishnetwork4937]

The smr130 is one of our cheapest clears So it does require a full 3 costs for max gloss and minimal shrink back

[@itsturbinetime]

You've been a huge inspiration for my Chanel bro. I'm only using a turbine system but the jobs are going well and I'm enjoying uploaded vids. Hope all is well with you bro!

[@BearBudgetgarage]

What turbine system? I use an Apollo system 7700 game

[@speedokoterefinishnetwork4937]

Thanks buddy !!!! Turbine has it's uses for sure

[@itsturbinetime]

@@BearBudgetgarage I use the fugi spray system semi pro 2

[@73swagin]

Can you please do a video of how you fold your booth up I have one and I can't fold it up worth shit 😂

[@speedokoterefinishnetwork4937]

Honestly I can't help you we roll ours up like a burritos 🤣🤣🤣

[@73swagin]

@@speedokoterefinishnetwork4937 well shit I guess burrito it is 🤣

[@speedokoterefinishnetwork4937]

@@73swagin YEEP !

[@webmastersof]

Hey Marco can you post me the links to where I can get the wheel paint that you used for the car and the trim paint?

[@speedokoterefinishnetwork4937]

Absolutely!! Just go to www.speedokote.com For the wheels you can just grab our ready to spray wheel silver in a quart . Just dump it in your gun and spray it so easy !

[@mississippiwrenches295]

Man loved this one 🔥🔥 especially the fan idea I just wish I would have seen this before I got that elephant trunk

[@speedokoterefinishnetwork4937]

Elephant trunk is still a improvement, but not as good as this imo

[@mississippiwrenches295]

@@speedokoterefinishnetwork4937 yes and that fan is more manageable than that trunk i didn’t know you had to build that thing 🤦🏾‍♂️

[@speedokoterefinishnetwork4937]

@@mississippiwrenches295 it was so annoying 🤣🤣 This set up just smack the fan in the front and done 🤣

[@mississippiwrenches295]

@@speedokoterefinishnetwork4937 just that simple for sure I got to do that modification to mine soon now 👌🏾👌🏾

[@lakepointmachinery1942]

Why did the turning off of the circulation fans and hour after last coat cause runs in the clear?

[@speedokoterefinishnetwork4937]

@@lakepointmachinery1942 a lot of paints rely on airflow to dry properly. If paint ain't drying .. it's running One thing iv learned lol

[@lakepointmachinery1942]

@@speedokoterefinishnetwork4937 makes sense. Thank you very much for your quick reply. West of Ireland. 👍🏼

[@travlite8496]

Nice job what spray gun were you using? Thanks

[@speedokoterefinishnetwork4937]

You will find out soon

[@Mels-Garage]

❤ awesome video, marco which one of speedokote clears lays the flattest?

[@speedokoterefinishnetwork4937]

Definitely the ss1200 glamor clear .. not super high build but super glossy and super flat

[@Mels-Garage]

@@speedokoterefinishnetwork4937 awesome ill place an order for it. Ive been using smr42 for 2 years with a dv1 but some customers asked for flatter finnish and i dont like buffing fairings and tanks

[@Mels-Garage]

​@@speedokoterefinishnetwork4937 will definitely order it. Ive used smr42 with a dv1 for 2 years straigh and i get some factory peel but some customers want flat finish on fairings and tanks

[@ANGELDIAZ-pc4pm]

One guy here in Puerto Rico made a coyote swap on genesis coupe

[@speedokoterefinishnetwork4937]

Nice !

[@mikemd2697]

Hi Marco, I have a question about clear coat... I have a 2001 BMW 5 - Series Wagon, all original paint - Titanium Silver Metallic (paint code 354). The clear coat has thousands of tiny micro scratches/cracks due to 20 years of southern cal sun. The paint appears to be fine so I just want to re-do the clear coat. What prep steps would you suggest and what clear coat would be best? Thank you, love your channel and just subscribed!

[@speedokoterefinishnetwork4937]

Yea it's definitely possible ... You could actually just go over whole car with a gray scottch pad really well and dull the clear out , and re clear the whole car with our smr42 . Very possible.

[@mikemd2697]

@@speedokoterefinishnetwork4937 Awesome and thank you for the quick response! Glad I'm not in CA any longer (in NC now) since the smr42 is not CA compliant : )

[@speedokoterefinishnetwork4937]

@@mikemd2697 yea only thing legally compliant in California is stupidity. 🤣🤣🤣🤣

[@mikemd2697]

@@speedokoterefinishnetwork4937 100%! I lived there for over 40 years and couldn't stand it any longer. I had to get my kids out of there due to the insanity.

[@speedokoterefinishnetwork4937]

@@mikemd2697 yup !

[@lensvlog2400]

Was this clear used with reducer ? And wanting to know the gun that you used

[@speedokoterefinishnetwork4937]

Just a cap full so only like half an oz And the gun you will find out soon keep fallowing 😊

[@Joeshomegarage]

Are all yours 2.0 turbos? I was looking at them yesterday on market place and saw 3.8, 3.6 maybe and 2.0 turbo all 3 I looked at had engines replaced. I figured the 2.0 turbo 6 speed would be the best.

[@speedokoterefinishnetwork4937]

2.0 8 speed auto is the fastest . There Definitely a good choice for a car

[@Joeshomegarage]

@@speedokoterefinishnetwork4937 I want to bang gears and this damn ford won't start 😭🤣

[@Joeshomegarage]

The car looks awesome though. I may have to budget for one of those booths. I have so many tools in my garage I just can't control the dust at all.

[@speedokoterefinishnetwork4937]

@@Joeshomegarage might not be a bad idea

[@Joeshomegarage]

@@speedokoterefinishnetwork4937 put me on the list to purchase your old model when they send you the new and improved one🤣

[@aronarreola7691]

Were can I get one of those interface pads you used on 3:22 to sand the hood

[@speedokoterefinishnetwork4937]

Amazon 🙂🙂

[@willielittle5307]

What is the color Code for that blue

[@speedokoterefinishnetwork4937]

Nha I think

[@dollabillbrunson8107]

Nice 👍!! My biggest question is how did you get the paint out of your beard 😂😂😂

[@speedokoterefinishnetwork4937]

Scrubbed the heck out of it 🤣🤣🤣🤣

[@dollabillbrunson8107]

@@speedokoterefinishnetwork4937 ehh… just use a little reducer!🥹🤣😂

[@PTucker0864]

Yooooouuuuu gottttt runnnnnnnns......bihhhh bihhhh bihhhhh bihhhhh....😂😂😂

[@speedokoterefinishnetwork4937]

🤣🤣🤣🤣

[@zacharyvaughn8135]

Those tunes are “top g” now..

[@speedokoterefinishnetwork4937]

🤣🤣

[@sinformant]

The genisis is what the tiburon should have been. I think if they would have had. Given the option of the 4.6l v8 in the genesis coupe, it would have sold more since there are guys out there that have the "v8 or nuthin'" attitude.

[@speedokoterefinishnetwork4937]

True !

[@enjoythesho1992]

They made a tiburon gt very similar to the geniuses coupe they had very decent power

[@sinformant]

@@enjoythesho1992 my buddies brother had one it was alright, but nowhere near as much power or anywhere as fast as the Genesis coupe. A 1st Gen cobalt as was faster and made more power from a supercharged 4cyl

[@enjoythesho1992]

@@sinformant well that makes sense considering the cobalt ss had 260hp and the tiburon gt had 170hp

[@sinformant]

@@enjoythesho1992 sorry but the 1st Gen supercharged cobalt ss only made 205hp stock. The 2nd Gen was turbocharged and made 260hp stock And 290-300hp with their Gm stage 1 upgrade kit and a tune. But the point I was making is the tiburon gt was making less power with a v6.

[@Jason-zr6il]

How much base and clear coat did you use?

[@speedokoterefinishnetwork4937]

Only like 90-120oz of clear I think Base coat 1 quart whole car cause we didn't primer seal it so it actually saved us a ton on material !!!

[@Jason-zr6il]

@@speedokoterefinishnetwork4937 wow amazing

[@speedokoterefinishnetwork4937]

@@Jason-zr6il yea the smr32 really did it on this one. Could have used the smr42 but wanted to see what I could do with the 32

[@Jason-zr6il]

@@speedokoterefinishnetwork4937 really nice. Keep up the good work

[@BearBudgetgarage]

That almost looks like the Black Widow 2.0🤔 i know.. Reveal and video coming🙃

[@speedokoterefinishnetwork4937]

🤣🤣🤣 you already know buddy . Literally only 2 people know what it actually is.

[@polehale]

👌🏾🍻

[@GabrielPigman-sh4zd]

I like your videos you are not I a two hundred thousand dollar paint booth you make it work and you done well for your self

[@speedokoterefinishnetwork4937]

Thank you alot

[@V1CSTAA]

The dong Yang pt 2 hahaha

[@speedokoterefinishnetwork4937]

Oh we are definitely doing some dong yang activities comeing soon 🤣🤣🤣

[@juny1231]

🔥🔥🔥

[@speedokoterefinishnetwork4937]

Thanks man!

[@timothyserrano6227]

Where is working place maybe i can go over and you paint my car sir. Pm me the address i hope your in california

[@speedokoterefinishnetwork4937]

Nope in pa

[@tripd4949]

A $400 paint job from a professional will look better than a $10,000 paintjob from someone not as good.

[@speedokoterefinishnetwork4937]

Very true

[@dogemcmoon9644]

Hey marko are you into cryptocurrency?

[@speedokoterefinishnetwork4937]

Not currently 🙂

[@skynetwifi9211]

Indian paint job..New name CHIEF RUNNING MAN lololol

[@speedokoterefinishnetwork4937]

We don't run all of them 🤣

[@GabrielPigman-sh4zd]

Nice video how long battery last on that baur da

[@speedokoterefinishnetwork4937]

About 1 hour of straight sanding give or take

[@warsun8443]

Awesome

[@speedokoterefinishnetwork4937]

Glad you like !