Speedometer Cluster Removal - Peugeot 206

Removing and replacing the speedometer cluster (instrument panel) on a Peugeot 206 from years 2002 to 2009. The part number is 5550003000. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@johnpettiford4861]

Very clear video. Thanks.

[@screwsnutsandbolts]

You are welcome!

[@danielsprot6059]

Thank you so much, very nice new year video

[@screwsnutsandbolts]

You're welcome, thanks for watching ! :)

[@Daxman021]

Thank you very much 👏

[@screwsnutsandbolts]

You're welcome 😊

[@EDZEN94]

Extremely clear & simple video, thanks

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@Pekka82]

Thanks, Do you have to program the replaced imdustrial cluster to the car or is it working straight ?

[@screwsnutsandbolts]

It should work straight away. However, if you replace it with a cluster from another used car, you should be careful: The mileage is stored in both the BSI and the instrument cluster so if any part is changed, both parts store the higher of the two mileages and if you then swapped them back, the high mileage would transfer into the original parts !

[@sefadursun2463]

Hey I need your help once again. My car stopped showing oil sensor light during at the turning on ignition key phase. I took it to an expert, he said that there is no problem in the wiring, and when they attach a computer to my car for diagnosis they said they were able to turn on the oil sensor light. According to them the problem is in the ECU. Do you have any clues for me? What can I do to fix this problem?

[@screwsnutsandbolts]

If it's an ECU problem I can't help you with that, sorry

[@sefadursun2463]

@@screwsnutsandbolts Thanks anyway. You helped me a lot before. :)

[@screwsnutsandbolts]

You're welcome, good luck

[@StromboliKicks]

Thanks for the video. It helped me replace the display bulb. But now I noticed I have some missing pixels/display segments, do you know if this is fixable? Thanks

[@screwsnutsandbolts]

I don't know if that's fixable to be honest. You might have to change the whole unit.

[@willycarmona1162]

Y PORQUE NO MUESTRAS COMO QUEDARON LAS AGUAS AL FINAL????

[@antsfur]

Another good video, i have the same dials on mine. How do you replace bulbs? My sidelight bulb isn't working been like that for 17 years! Thanks happy New Year.

[@screwsnutsandbolts]

Thank you, you too !. What year is your 206 ?

[@screwsnutsandbolts]

The bulbs can't be changed on this particular unit as they are fixed LEDs but on some units they can be changed individually, like in this video: kzbin.info/www/bejne/baOniaNjhcaMhNU

[@yollogames]

How can you change the lightbulp at this model, i have the same model but i don't know how to change the light...

[@screwsnutsandbolts]

The bulbs can't be changed on this particular unit as they are fixed LEDs but on some units they can be changed individually, like in this video: kzbin.info/www/bejne/baOniaNjhcaMhNU

[@andresyopasa2337]

Hola, si cambio el tablero, ¿se modifica el kilometraje original?

[@screwsnutsandbolts]

This is what I read: "If you replace it with a cluster from another used car, you should be careful: The mileage is stored in both the BSI and the instrument cluster so if any part is changed, both parts store the higher of the two mileages and if you then swapped them back, the high mileage would transfer into the original parts !"

[@magaliisa1554]

Hola buen día saludos de argentina . Necesito la conexión del tablero de instrumentos usted la tiene y me puede ayudar, desde ya muchas gracias Juan es mi nombre

[@mattymcloughlin5453]

Iv just bought a cheap 206 the mileage is just two orange lights no numbers I can’t see a buld when I took it apart how do I fix it thanks

[@screwsnutsandbolts]

I don't know if you can fix that part, sorry

[@pasklumumba403]

Mine does no longer show speed and rpm. What is the fault? Would exchange this with new one help or is it another problem? Mein Tacho und Drehzahlmesser zeigen bereits im Stand beide irgendwelchen Unsinn an. Was ist der wahrscheinlichste Fehler`?

[@screwsnutsandbolts]

It's possible the speedometer unit could just be worn out with age so it might be worth trying a different unit.

[@7yaya754]

This video is very clear and precise, thank you. On my 206 Peugeot, there is no more indication of the mileage. Do you think I just would need first to clean the contacts of the wiring plug ( all of them )? Or is it more serious ? I want to sell the car, and it is difficult if I can't give the proper indication of the mileage ! Thank you in advance.

[@screwsnutsandbolts]

It's probably worth checking the wiring contacts first to see if that helps. It may be a faulty unit but it's hard to tell.

[@liebuster9308]

when speed and rpm is no longer shown the right way - what can I do? Even still standing and switched off, it shows 110kmph and 3000 rpm The rpm display goes higher when I give gas.

[@screwsnutsandbolts]

Is it the same car as in the video ?

[@oliveiraphael]

Hello mate, the velocimeter is not working. What could it be?

[@screwsnutsandbolts]

Are the other dials working ?. It could be a faulty unit

[@oliveiraphael]

Hi @@screwsnutsandbolts! Thanks for your attention. I've changed the speed module and now it's working.

[@screwsnutsandbolts]

Well done ! :)