Spektrum NX Setup: Start to Finish Tutorial - Function List (NX6/NX8/NX10)

[@flyingfisherman9076]

BD, The NX10 showed up Thursday evening, and after about an hour and a half of setup, including importing my previous DX6E model memory into the NX10. I also set up some of the newer features I never had or never used in the older radio. Today, (Saturday morning) I was flying with the NX10. The transition was painless and error-free. Before making the decision to purchase the radio, I was apprehensive about upgrading because of all the opinions on the internet. The mixture of wildly negative (and positive) experiences just wasn't logical, but that is the internet experience. The NX10 functions as advertised by Spektrum. At this point, I'm extremely pleased and I'm continuing to take advantage of the newer features as I learn how to use them. Flying the 3 models I flew today was a seamless transition from the DX6E with exception of the better feel of the gimbals and having an endless supply of transmitter power. Your videos are highly recommended to reinforce the setup procedures found in the operator manual. Thanks again for the excellent content.

[@BDTennessee]

Awesome to hear that feedback! Glad you enjoying new radio. Thanks for watching and support :)

[@mvelardo]

Thank you! Just bought the NX8 and this was my first video.... now I'm watching all your others. Great job!!

[@BDTennessee]

Thanks for stopping by the channel and congratulations on your purchase! NX8 is great value!

[@Dg-zj6jo]

at last a good video on how to do it well done sir

[@BDTennessee]

Thank you DG!

[@DronemanJoeRc]

Like I said bud the best instructional video on the net!! GREAT GREAT JOB!!

[@BDTennessee]

Thanks 👍

[@-cmafia-7745]

Nice basic run through BD. Thanks for sharing!

[@BDTennessee]

Thanks CM! Appreciate you watching!

[@flyingfisherman9076]

Thanks for this great series of videos on the NX10! I have been in research paralysis trying to figure out what to move up to from my current DX6e. Your videos have provided excellent descriptions and remedies, where necessary, for many of the user issues posted on the interweb. I already have a rack of Spektrum receivers and other gear so I'm reluctant to switch brands if it isn't really necessary. From what I have experienced myself, and seen here, I am confident I'll have a great radio in a few days.

[@BDTennessee]

NX8 is overall value and NX10 is good step up for extra money...

[@flyingfisherman9076]

@@BDTennessee I ordered the NX10.

[@BDTennessee]

@@flyingfisherman9076 congratulations on radio!

[@ruimessias1302]

Hi, great video and much appreciated such kind of turtorial. You are helping everyone with spektrum around the globe...greetings from Australia... Thank you mate..

[@BDTennessee]

Thanks for stopping by the channel from across thje pond! Sub to the channel for more videos :)

[@nickviner1225]

Thank you that helps me.

[@BDTennessee]

Thanks for watching!

[@brucepearson6322]

BD, I can not find where we were talking... about nx8 6ch sailplane

[@electric_rc]

Thanks for the putting these videos together. I have found them very helpful. One question though. Can you do a video that explains how to setup the left and right trims (next to switch D and E) For me I use a NX8.

[@BDTennessee]

Thanks Electric for the support. I have a video using them for in flight elevator mix adjustment.However might be good to do one for L/R trimmer too :)

[@muskybob8726]

good review!

[@BDTennessee]

Thanks!

[@yan-jk1ti]

coming from the ix12,this nx is so fast/enjoyable to program..

[@BDTennessee]

Thats great! Thanks for the feedback and watching!

[@brucepearson6322]

Teach me Please!

[@islandrc-duke1972]

cool tutorial,great video

[@BDTennessee]

Thanks Duke!

[@islandrc-duke1972]

@@BDTennessee 👍✌😃

[@williamreape4326]

If you have time. I have a question. Is there a way to reset the min and max on the vario?various? Thanks again for all your help.

[@BDTennessee]

You referring to the min and max warnings?

[@williamreape4326]

@@BDTennessee no. On the screen for the altitude it shows minimum and maximum value. I can't look at the screen and fly. Just curious if you can clear it before a flight, and see what you're altitude was for that flight.

[@boss2234]

Grate video BD

[@BDTennessee]

Appreciate the positive words Boss!

[@michaelrouser5730]

BD, what does L and R trimmers do? I understand the other trims.

[@BDTennessee]

Assignable trim adjustments.

[@abdulatiftlaib2215]

I was using DX8 transmitter and it was ok now I shifted to NX10 transmitter, I have now problem with response of the sticks to commands as there is a delay in execution of commands which was not noticed in DX8 TRANSMITTER

[@bobgodfrey3387]

Hi I brought a use nx-6 that is lock is there a way you can unlock without a user name and password thanks

[@BDTennessee]

You need to contact Horizon Hobby. Tell them you bought it used. Sometimes they send out a email to previous registered email to see if lost or stolen.

[@billpennymcnally226]

Great Video does this apply to the NX8

[@BDTennessee]

Yes. Video applies to 6,8,and 10.

[@billpennymcnally226]

Thanks mate i just got the nx8

[@BDTennessee]

@@billpennymcnally226 awesome! Its a great value!

[@billpennymcnally226]

@@BDTennessee I have a Hitec 9 unfortunately all Hitec stuff is not made anymore in Tasmania the NX8 Is $700 AUD

[@BDTennessee]

@@billpennymcnally226 oh wow thats pricey. One guy at field still uses hitec :)

[@roscoebennettiii4936]

How do you change the screen to be fully lighted all the time ?

[@BDTennessee]

Go to System Setup - System Settings - Backlight - Click enter on the number and scroll left to "on". If you want visual reference checkout the other video like this one (System Setup).

[@roscoebennettiii4936]

@@BDTennessee Thank you ! It is done .

[@BDTennessee]

@@roscoebennettiii4936 your welcome,anytime!

[@seany11244]

How do you set a telemetry voltage alarm ?

[@BDTennessee]

You can go into Telemetry Menu and change "INH" to "Tone". You can also use the auto calibration feature.

[@brucepearson6322]

BD! I need help again! NX8, 410rx, Bulero V-tail... In sailplane, 2 aileron, 2 tail, bottom load (A). Had to reverse elevator function now rudder function is backwards. Do not see how to correct Rudder function without changing elevator again. PLEASE HELP! Lol, I get lost in this radio with every new bird and my only hobby shop guy with any knowledge is gone! I'll take help from anyone wanting to help. Thanks BD and all.

[@BDTennessee]

What channels is your channel setup? Channel 1- Channel 2- Channel 3- Channel 4- Also what aircraft type are you using?

[@brucepearson6322]

@@BDTennessee 1L aileron 2R aileron 3L elevator 4R elevator Sailplane V-tail A

[@BDTennessee]

@@brucepearson6322 is that how you have them hooked in receiver and changed RX port assignment to match? Standard layout is different.

[@brucepearson6322]

@@BDTennessee I changed the input order, now it works. Thanks BD

[@BDTennessee]

@@brucepearson6322 there we go! Glad to help Bruce,holla anytime!

[@JamesWhite-yj7sd]

FOR $80.00 MORE YOU CAN HAVE A IX-12

[@BDTennessee]

Yes,if thats what you want...