Diode Dynamics SS3 LED Fog-lights in-depth installation | 2016 - 2020 Toyota Tacoma TRD Off Road

[@blum3416]

Love my DD SS3 pro fogs as well! Excellent choice. FYI those fogs are aimed way too high though. Looks like they are the same height as the headlights. Should be aimed about half way between the low beams cutoff and the ground when about 25 feet away for them to be street legal. Otherwise they are just blinding oncoming traffic in day-to-day driving.

[@whatfreedom7]

Yeah they do look too high. It would be blinding to other drivers.

[@Cementgraytacoma]

I just installed mine and they don’t feel legal when I’m driving with them at night. How do u angle them?

[@JamesHouser-p5r]

​@@CementgraytacomaPros are probably not legal. For dogs I kept it at "stage 1" while everything else will be off-road.

[@youtubeguy345]

these fogs aren’t street legal regardless edit* pros aren’t street legal

[@realdealneal3189]

Best install video for these fogs by far. Good job on clear instructions along with great camera angles and lighting

[@codyw6496]

looks like a big improvement in function and looks. might just have to order a set for myself. Keep up the great work Spencer. Really enjoying following your Tacoma content.

[@2FittedBW]

The cinematography lately has been very top notch!

[@icloudchris]

Yessssss another video! I think your specialty is lighting, wiring you have a knack for it.

[@SpencerHogg]

Thanks so much dude! Appreciate that!

[@justinli9633]

Solid content as always! Love the drone footage

[@SpencerHogg]

Thank you!

[@SpencerHogg]

Don't forget to use discount code: Spencer10 at Checkout for anything site-wide on www.prolightz.com Also free shipping on $50+ and they ship to the US so you can take advantage of the CDN x USD rate and save another 30% to 40%!!

[@stephenviggiano1610]

Great content. Thank you. Got my SS3 Pro’s in under 30 mins thanks to you.

[@jcsaucemoney]

Damn those are bright! I’ll be adding those to the list now too

[@FULLTHROTTLEAUTO]

Looks great. The power output seems to be amazing. Great video. Keep it up.

[@SpencerHogg]

Thanks alot buddy really appreciate you sticking around for the new content and always commenting.

[@lightinlove3368]

Holy crap that was kind of a pain in the ass but I did it. Thanks for the video! 🙏

[@KayBertoss]

Have the sports performed well in the cold? I'm on the west coast (Van). You are in Alberta. Did the DD SS3 sports generate enough heat to stay clear of snow & Ice in an Alberta winter? the Pro's generate much more heat. Would you have gotten the pro's for the snow & ice melting heat instead of the sports?

[@SpencerHogg]

They generated plenty of heat, worked no problem in -30*C!

[@KayBertoss]

Thanks Spencer. I have a pair of Sports on order for my 2020 TRD Sport from your link. Not getting clogged with snow was one of my only concerns. They not only look fantastic on your truck but are very practical. Perform X2 better than OEM fogs from my research. A quality product made in the USA too!

[@tervill8268]

Great video. What are the plans for wheels / tires / suspension?

[@songmaster9308]

So you "adust it" before you put it in without even knowing whether the adjustment is adequate. No wonder people have these shining in the trees, there needs to be an easy screw adjustment like the factory fogs that you adjust AFTER you install them.

[@shermfj]

There was a reply, can't find now, but apparently adjustments can be made by reaching through engine bay after installed.

[@m.687]

If you ever decide to change these out or adjust them, you can easily just reach down through the engine bay. No need to pull back the fender liner. All you need is one of those stubby screwdrivers.

[@SpencerHogg]

That's very true hah we realized afterwards!

[@shermfj]

Thanks, just about to ask about adjustments.

[@whiteazn2]

When u put the fogs on and u hit little bumps does ur lighting bounce around? Mine seems to be not stationary even though i tighted the bolts..

[@ahkeen]

Still not sure how far out the bracket is suppose to be. On the instructions it said there is suppose to be a gapping hole.

[@SpencerHogg]

Ken S there’s a slight gap about 1cm yes but it can only fit 1 way regardless so unless the screws don’t go back in it’s rivht

[@PS987654321PS]

@@SpencerHogg do your fog lights have some play in them? Do they slightly wiggle?

[@alphasierrahotel7]

My new sport SS3's don't seem as bright as yours, weird.

[@kevins.1752]

Thanks for the video and content. Tried to order these lights and the code is not valid. Was there an expiration for the code?

[@SpencerHogg]

The code just expired now unfortunately :( I'm sorry

[@bsfunk44]

Good vid, love the fogs. Btw the price on the fogs after exchange is what we pay retail for them in the US so it doesn't really save us anything...but good looking out regardless.

[@SpencerHogg]

True!

[@michaelfrymus]

Now, what if you have the backlight? That's a 3 wire

[@jaysarin2826]

Great video!

[@zimmer550lef4ded]

those fogs are aimed wayyyy too high bro

[@SpencerHogg]

We did aim with the wall not sure the measurements now I forget but what height (inches?) do you think they should be?

[@shermfj]

What guide did you use to adjust the beams? Great video. Thanks

[@SpencerHogg]

Hey thanks man I just did myself adjust the screws on the top (the manual shows)

[@J.G.Romo.W.]

You’d pick these over the Baja Design fog lights..?

[@MrMikey1273]

Are those the sports or pro version?

[@SpencerHogg]

Sports

[@MrMikey1273]

@@SpencerHogg I just found them on sale for Black Friday weekend on Amazon for $169 usd. So I finally pulled the trigger today. I'm looking forward to them being much better than the stock ones with yellow Lamin-x films.

[@AbbeyH23]

So awesome 😎🤘

[@SpencerHogg]

🤘❤️

[@tommanning7337]

👍🏻😎👍🏻 nice man

[@JamesHouser-p5r]

More information than the actual company provided 😂😂😂

[@DmDetails]

Good work!

[@SpencerHogg]

Thanks so much bro appreciate it!