Reusing an ipad first generation screen as a preview monitor. HDMI controller card and a new case.

Рет қаралды 11,701

Күн бұрын

Get JLCPCB 6 layer PCBs for just $5! Register to get $80 Coupons: jlcpcb.com/?fr...
Spidermaf continues his experiments with using an old ipad screen. The controller card has finally arrived, so he tests that as well as designing a new case to turn it into an HDMI monitor using OpenScad
Part one video here: • What to do with an old...
After many years of using their services this channel is now sponsored by JLCPCB
OpenSCAD file and stl for this video:
github.com/Spi...
Spidermaf bought the LED controller card from this seller but they are currently out of stock:
www.ebay.co.uk... (search for LP097X02-SLD6)
Wave to my other SpiderChums and tell them I sent you at:
‪@TerrainbyAaron‬ ‪@CraftRedux‬ ‪@AndyMecha‬
And honorary spider mention to ‪@Hydrationist‬ for some minecraft fun too.
SpiderMaf goodies in Etsy Shop
www.etsy.com/s...

Пікірлер: 45

@spidermaf 2 ай бұрын

Had some more audio clicks and shadow issues in this video - apologies - just noticed on for the lights had blown in the cave which was causing the extra shadows.

@EngineerNotFound Ай бұрын

Thanks for showing the case redesign part too. I repurposed a laptop screen a few years back but the setup was quite crude because I didn't really have proper tools to make a casing. I only just found out that iPad screens can be repurposed too so I can re-use my iPad gen 2 screen - but this time I have some idea how to make the setup sturdy, while looking cool at the same time. Saving this in my 'resources for projects 'playlist.

@cursoderobotica Ай бұрын

Good project!! Nice job!! Thank you for share it!! Cheers

@spidermaf Ай бұрын

Thanks for the feedback

@jackipiegg 2 ай бұрын

16:53 Hope you didn't throw away the original aluminium ipad enclosure. Some people managed fit the board inside the ipad case and reuse volume/power/home buttons for navigation. You might need to drill holes or have the entire board outside and just slot in the wires through the power port.

@spidermaf 2 ай бұрын

To be sent to @bigstackd to be turned into the finest pirate coin....

@paulfrost8952 Ай бұрын

From memory 10mm is 3/8”.

@poppadave6991 Ай бұрын

Very interesting to watch the progress 👍

@desmondbello4144 2 ай бұрын

Dwayne Dibbley!!! Haven't heard that name in years! Looks like i'm heading to Netflix and watching me some Red Dwarf!! Also, great videos mate. I've 3 old ipads & I've been wondering if i could do anything with them instead of chucking them. Now you've given me the idea to research & make a screen for a raspberry Pi for on the go research.

@spidermaf 2 ай бұрын

Aw thanks. And if you find a way to interface the ipad touch screen to a Pi let me know!

@volttherobot 2 ай бұрын

Great job finding a use for that old iPad! Love 17:06

@spidermaf 2 ай бұрын

I'm glad you enjoyed the recursion Mr Volt

@stickmenwithrayguns 2 ай бұрын

Great video. 👍If the touch sensor would work this could become a sure hit among Raspberry Pi users. 😉

@spidermaf 2 ай бұрын

Yeah. The digitiser connector is still there in the back of the screen. But would need the opposite socket and someone to work out an interface for it.

@Wolflover24 2 ай бұрын

Nice! It’s crazy to think that that would have just been ewaste but you gave it a second life You have a sub!

@spidermaf 2 ай бұрын

Thank you!

@TerrainbyAaron 2 ай бұрын

I didn't notice. I was more intrigued with the build.👍 Good stuff

@spidermaf 2 ай бұрын

@@TerrainbyAaron Fanx Mr Terrain

@aquahoodjd 2 ай бұрын

They usually have a multi-pin connector and then a some of them have a backlight couple of wires

@brianpacchetti5028 2 ай бұрын

Might suggest applying some kaftan tape on iPad video to display connection.

@spidermaf 2 ай бұрын

That's a good idea. I was thinking it was a pity the board connector didn't come with the same handle/hook that the ipad one came with

@ScottLahteine 2 ай бұрын

Pretty nice. The old iPad 4 could get some new life. Hardly any apps run on the old thing anymore.

@spidermaf 2 ай бұрын

Something I was reading on the controller card listing implied it would work on iPad 4 if I recall correctly. But best thing is to crack your old iPad apart (assuming you dont use it for anything else first ) and look at the label and do an eBay search for that panel. I’m not sure if the iPad 4 has a glued in screen either so access might be different.

@MrBobWareham 2 ай бұрын

Looks very nice, a good project I think I will have a go with the Dell screen I have as it is 1080p, thanks

@spidermaf 2 ай бұрын

Give it a go. Make sure you get the exact panel model from the inside of your screen (don't rely on online specs) and then search for that model on Ebay or ali to find the correct card.

@coondogtheman 2 ай бұрын

I'd like to make something like this but with built-in speakers and then watch TV and play games on it. Sadly I don't have a 3D printer or the skills to design something like this.

@aquahoodjd 2 ай бұрын

I can literally have a Pi 5 when energy low like lithium ion or po and a mini ATX with a GPU for when there is mains or sufficient solar / micro wind.

@2Old4Toys Ай бұрын

Any screen ratio options so th picomac fills the screen undistorted with HDMI but 4x3? That'll be perfect.

@aquahoodjd 2 ай бұрын

But I have so many screens and I would like to put one in a cyber deck inside of a pelican case I have and perhaps have a dual screen so that it folds out?

@RixtronixLAB 2 ай бұрын

Nice video, thank you :)

@spidermaf 2 ай бұрын

Appreciate the comment.

@aquahoodjd 2 ай бұрын

I have many LED screens from old laptops. Is there a common controler or a method to them?

@spidermaf 2 ай бұрын

Best way I’ve found is to get the model off the back of the panel and search for that model and the controller card on eBay or Ali. And make sure that the cable to the led panel comes with the card. You can by a generic card and do the cabling and the card firmware yourself. But it probably won’t work, it barely ever worked when I tried that. So now I just buy the card that’s been pre flashed with the correct firmware and cable for your panel.