Spiral Welded Pipe Manufacturing Process

Steel pipe, using the submerged arc-welding process (SAW), is manufactured by Hall Longmore to a diameter ranging from 660 mm to 2540 mm.

[@bestarsteelco.ltd.7153]

Very nice.

[@As-xv5cr]

He has worked as an external welder for the manufacture of pipes and his experience in this field

[@ksrawiksrawi9712]

يحياالملك يحياالوطن شعارنا الخالد الله الوطن الملك الصحراء مغربية وستبقى مغربية إلى أن يرث الله الأرض ومن عليها ❤️kzbin.info/www/bejne/ambGmamNptp_mbM

[@tomast9034]

invented in former cssr ages ago :D

[@IkanGelamaKuning]

Waffer roll stick biscuit thoroughly checked by inspectors.

[@globlshengtin6973]

Our company produces high quality steel pipes. Welcome to consult us. www.strpipeline.com/product/welded/533.html

[@hubertkaiser8581]

Y like the inspektion job inside in the pipe, you are allone, nobody disturb you, the maximum...

[@jennylv457]

Which company is it ? So great !

[@pr4wn5tar]

thumbs up for 90s lore

[@fxmastersaleemsiddiqui8047]

I like this work

[@jorgenlinden3529]

Spiral svetsoperatör på 80talet gränges Hedlund

[@amirjalalvand2776]

ما میخواهیم این استوک این خط تولید راداشته باشیم

[@laxmansinghrajput669]

🌍🌍🌏🌍

[@randyfox364]

Space X really needs to consider this mass produce rockets!

[@alexanderthegreatahmadalto2867]

نظرا لعدم وجود مكبس فرش عرض ٨وطول ٨متر زيادة للمسك وتكلفة بناء اخر يمكن الكيس على جزئين و استخدام تلك الت اللحام للتجميع

[@discountstore4601]

ej

[@As-xv5cr]

خبره في تصنيع البايبات

[@ygorjj]

We have this machine in Brazil, but make the very simple process

[@amirjalalvand2776]

سلام.ما برای خریداین خط آماده ایم

[@bhaskarreddy5337]

Sir we are looking for such machine

[@CarmenRodriguez-wd8ye]

which company is it?? i need to contact them

[@randyfox364]

Forward to Elon Musk

[@hdpepipemachinery]

Good machines

[@submergedarcwelding-ln6rw]

good

[@gazirafik3473]

good get brother

[@tigertalar]

Elon Musk should use this to weld Starships

[@josephastier7421]

Maybe someday he will.

[@PopMoser]

good!

[@danishahamad7358]

what do you do in case a part of the welding goes wrong. do you manually weld them? or reject that section of the pipe? What are the norms?

[@allscott100]

Little late to answer your question but if there is a flaw in the weld it is either fixed by hand welding it or if it can't be fixed the defect is cut off. They then can take 2 or 3 pieces that have been cut off and weld them to each other for one length of pipe.

[@rocnoir4233]

You kick them out into a repair bay and they're repaired by hand/with sub arc depending on the amount of work and location.

[@ravipathak1954]

RAVI Kumar

[@senweltubemills]

Very advanced!

[@laxmansinghrajput669]

💜💜💚💛👌

[@alexanderthegreatahmadalto2867]

;-)