Would you mitre external corners or butt them straight edge to straight edge? Also do you butter the tiles for the whole job or apply adhesive to wall at any stage. I'm thinking of doing my chimney breast and think mitring the external corners won't work out too well with the irregular face of these tiles. Thanks Tony
@Danny.A6653 жыл бұрын
Love the channel, so many hints and tips. Could you recommend a water based gloss for window sill and best way to get a brush stroke free finish ? Cheers
@matthews83773 жыл бұрын
What are you doing on the front of the chimney breast just painted. Wanted to do something similar but didn’t know if seeing end of tiles would look odd but this looked great
@PaintingandDecorating3 жыл бұрын
Yes just painting possibly upto the edge of the tile, may leave a small edge of adhesive. Thanks
@waynenixon7293 жыл бұрын
Would you recommend the Mac Alister tile cutter you used on this job?
@PaintingandDecorating3 жыл бұрын
Yes very good. Thanks
@martintendayichirombe40163 жыл бұрын
Single handedly and awesome
@PaintingandDecorating3 жыл бұрын
Thank you.
@daniellarno74772 жыл бұрын
why didnt you 45 degree cut them for the corners. would look better?
@PaintingandDecorating2 жыл бұрын
Very difficult to cut
@daniellarno74772 жыл бұрын
@@PaintingandDecorating really I used a diamond constant blade on my mitre saw and just used a hose to keep the dust down.. very easy..
@runawayjim63503 жыл бұрын
How do you finish the bottom after you remove the shims? Just caulk?
@PaintingandDecorating3 жыл бұрын
No best to grout.. thanks
@littlemancsy3 жыл бұрын
You’ve used the wrong adhesive for starters
@Windavinci2 жыл бұрын
Were they porcelain tiles?
@michaellampard63583 жыл бұрын
Dot and dabbed tile. I've seen it all now
@PaintingandDecorating3 жыл бұрын
Perfect way to fit these.. they are rough and uneven.
@aibel993 жыл бұрын
Can you use this in a shower?
@PaintingandDecorating3 жыл бұрын
No
@aibel993 жыл бұрын
@@PaintingandDecorating thanks for replying, why can't it be used in a shower?
@seoras442 жыл бұрын
Exterior? Video shows up to an exterior corner. Not how to go round that corner.
@charlesadkins41139 ай бұрын
Lol. Don't show doing outside 90 degree
@markgardiner17423 жыл бұрын
Is this a joke by any chance. Cheap crappy tile adhesive. Dot and dab not even scerating the wall. Really.
@PaintingandDecorating3 жыл бұрын
Doesn't sound like a joke.. maybe you need to work on your punchline.😁
@AnthonyRobertShaw3 жыл бұрын
Totally the WRONG way to do this.. And a terrible video without any commentary.
@PaintingandDecorating3 жыл бұрын
Thanks. Will take a pic in 10 years or less just to show you its still good.
@suddy073 жыл бұрын
How do you do a external corner with these tiles?
@StGnarles2 жыл бұрын
Interlock them.
@davidhehir2310 Жыл бұрын
I've never seen the one handed working technique before if you use both it might be twice as quick
@mahlapropyzm91803 жыл бұрын
Well they do look nice, but I'll bet they're a bugger to clean after a few years.
@PaintingandDecorating3 жыл бұрын
Once finished they are sealed using a stone sealer.. which really does help keep the dirt getting ingrained. Thanks
@anitagoodsleep5330 Жыл бұрын
I would shred the wall then shred the back of tile….need good coverage boss
@miker81493 жыл бұрын
Very nice thanks for the video
@farukm7627Ай бұрын
Amateur
@internetclips18 ай бұрын
bodge job
@Slimebouncy3 жыл бұрын
So nice 🤑🤑💚💚🖤💟💟 Have a nice day guys 🌷🌷🤑🤑
@PaintingandDecorating3 жыл бұрын
Thank you.
@MohammedAli-12 жыл бұрын
Lovely job mate 👍🏽
@richardjones31123 жыл бұрын
Nice .Where did you purchase the tiles?
@garyliverpool16092 жыл бұрын
Just fitted these tiles yesterday and never seen them fitted so bad… try scribing the tiles in !! People like u destroying tradesmen clown… yeeehaaa 🤠🤠🤠🤠
@gerwyn773 жыл бұрын
Cutting with 1 hand 🤦🏼. Better to use a powder mix adhesive because it’s a lot stronger when it sets not like the ready mix tub adhesive . I wouldn’t use ready mix adhesive on split face. It takes ages to set and it’s not suitable for heavy tiles.
@silvanamcauley719 Жыл бұрын
These tiles are in a house I am interested in buying, I'm not keen on the colour but think they'd look nice in a dark slate grey. Are they paintable and if so what paint would you recommend using? Thanks.
@brandonrobinson57032 жыл бұрын
I’m surprised your tile doesn’t fall or break.. this is not how you should put mortar on your tile at all
@andrewmcgeorge78203 жыл бұрын
1st
@Eddie-pb4vf3 жыл бұрын
Nice and tidy 👍🏻
@PaintingandDecorating3 жыл бұрын
Thank you.
@arf4n1663 жыл бұрын
Nice tiles, onto normal plasterboard? They seem heavy
@PaintingandDecorating3 жыл бұрын
Yes nice tiles and its fitted to fire rated plasterboard.. thanks
@syed99433 жыл бұрын
Hey how would I know how many tiles I would need for my wall? Need your measuring insight plz
@ellgeee18713 жыл бұрын
pieces sold a little under sq then measure your wall in sq