The Dumbest Racing Mistake I've EVER Made!!!

[@CleetusM]

Who’s ready to see Sam make a run in his F-150 this week?

[@daronsmall9326]

Me 🙋‍♂️

[@jojopadawan3001]

Brooootthhhaaaaaa

[@MarkOsipov-hx8dc]

Hell Yeah Brother!

[@jhansen6180]

I want to see it on the dyno too!!! That SuperCharger is awesome!!

[@NathanMercedeexpert15]

I am cleet

[@joshfosho]

When Rip starts talking, and just calls everyone "Brother" its going to be the freakin best 😂

[@Chesterfield.Esquire98]

Fr 😂😂

[@jesse096]

His first word was brother, I can guarantee it 😆

[@Hanibul_Lecktor]

Don't forget "Do it for Dale!"

[@EraserNZ]

i can't wait for his first jr dragster lol

[@brentmcmillan646]

That will be hilarious!!!

[@robertroderick4933]

Please Please Please stop leaving all the random stuff in the car. A crash is bad a crash where you would have been fine but that screw driver slammed into your chest so you aren't is worse. We love you man Please clean the car up before you run 220+.

[@lukealeckson3525]

Was thinking the same thing when I saw that.

[@tanco2158]

💯 percent agree with you... I don't like seeing stuff flying around in the cars as they make a pass...😖

[@JustBrewha55]

I'm not disagreeing at all, but it may have been the dzeus fitting driver to remove the hood. The driver must have that in the car in case of a (small) fire/emergency after a run in the engine bay. An easy fix would be to get a, decent, quarter size magnet, stick it to one of the bars for the roll cage and attach said driver to said magnet. Can it still come off in the event of a crash? Possibly, but it would help and barely costs much.

[@yhelloh]

@@JustBrewha55 so make a tiny strap that keeps the fitting driver in place so that it doesn't fly around or become dislodged in a crash.

[@scubajoe3321]

He's got a helmet

[@ACobra289]

The look on Jackstand's face when Cleet is talking about doing donuts in the burnout pit is priceless! And shoutout to Zach for nailing down that wiring issue.

[@ctskifreaks]

He's not mad. Just disappointed.

[@tehlyingcake1096]

Needed every ounce of restraint not to slap cleet lol

[@ACobra289]

@@ctskifreaks 🤣🤣

[@obsidian....]

🤣🤣🤣 Classic

[@MediumWolf227]

Disappointed father lol

[@TnuTz4u]

😂😂 Jackstand "You know this is uh race ,like drag, car....right?" 😂😂

[@Powerwashincrocs]

His look before he said that. 😂

[@AlbertoPirlare]

@@Powerwashincrocs Man the look in his eyes hurt me :D

[@Logan-km3ep]

His face said it all lmao

[@MrFoster91]

Everyone with a serious face, and then you have the Dr dying of laughter. 😂😂

[@killjoy6663]

You did what 😂

[@matthewbutz079]

I saw you at sick week in Cordova last year. You are the one of the most genuine person and down to earth I have ever met. Keep on doing what you do!

[@josephbalsano3153]

You need to get rid of Doctor tune them.All he doesn't know what the hell he's doing with these cars.He turns him up too high.I don't know what to tell you is man.Get rid of that dude.And get some of hit people back there.Please get Pete back.Use your brain boys.Get rid of your doctor your balls

[@masterjerry5442]

Cleetus said “It just hit me, I did donuts on these tires…” The look James gave him lol

[@Rico_71]

Yep he went 😑 🫥

[@airaksinenaapo]

The boys were so dissappointed!

[@bradd5112]

"you did what?" hahaha, James is the best

[@HerbCrustedSpam]

😂 Cleet: “The wiring is sketchy.” Zach offscreen: “It’s bad!”. ☠️

[@B-U-C-K-S-H-O-T]

From somewhere inside/under the car 😂😂😂

[@Doux421]

😅😅😅👍👍

[@herring87]

These test and problem solving videos are what got me into your channel! So good to see you guys work at it and see the excitement in your faces once you figure it out. Hell yeah brother! Keep up the great work

[@Simmion1984]

The race weeks and the prep time leading up to them are my favorite content. I love seeing how much work it takes to get these cars from a to b and love celebrating with these guys when they're winning.

[@joec1234]

Holy crap! Jackstand's face at 26:05 realizing those were the tires he did the donuts in is priceless!! ALL DAMN DAY! The the face of a father if I've ever seen one!😂😂😂

[@TheTyisawesome]

"You know this is a RACE.... like DRAG CAR.... RIGHT." 😂

[@realMaverickBuckley]

26:02 😂

[@Dasam2012]

Mom scolding him and dad in the back "it does really good burnouts though"

[@kanjionshasteen9159]

“You did what”

[@Alexgetstowork]

😂😂😂😂

[@keeganwilliamson8123]

Jack stands face when cleet admitted to doing burn outs on the rears is like a dad disappointed in his kids

[@AlbertoPirlare]

I felt embarrassed halfway across the globe I hope I never have to see that look again =D

[@PhantomMs1]

You did wut???....

[@jauken83]

He wasn't mad, he was disappointed. Which is always worse!

[@Rollin8.0]

I just got to this post of the video as I read your comment and I'm crying 😂 All day they can't put power down in the car, stressing, frustration, making changes... Then James realising Cleet fucked the tyres last time the car went out... You can see he's trying SO hard not to start swearing 😂 Poor guy, I feel for him!

[@BennyTygohome]

I think Zach and PFI Brent are probably two of the best you could take on a drag and drive. Those guys ability to diagnose the gremlins is impressive.

[@SamWilliams78]

With all the stuff Zack diagnosed and fixed in just this video, you picked the right copilot for sick summer. Good luck guys.

[@eddominates]

Employee of the month FS

[@Lil_witte17]

Just wondering who initially did the wiring

[@DareTheMachine]

@@Lil_witte17Yea looked like a rat’s nest. Awful wire pathway for a race car that vibrates…

[@FriedEggsandJellyfish]

@@Lil_witte17 The shop that built Mullet. KSR fab

[@SportbikerNZ]

@@DareTheMachine Not at all. And wouldn't have been an issue if not for bolt backing out.

[@Olie_d94]

James with the “I’m not mad, I’m just disappointed” face lmaoooo

[@TobyCatVA]

Total Dad look.

[@nickmendez5546]

100%

[@dandiaz9752]

Lmao

[@dakotaflaherty5141]

Your videos ARE therapy for some people BROTHER!! Your videos keep me busy while I was laying around during cancer treatment. Much love CLEET keep doing your thing BROTHER!! 💯

[@richardjordan9092]

Don't worry he's gonna keep pushing scams onto his audience.

[@woody8577]

@@richardjordan9092 Care to elaborate?

[@Frugstar23]

Zach from under Mullet...... 'its baaaaadddd' 😂

[@Blackbirb5150]

I lost it at this part Cleetus: Idk where Zach is... Zach: It's Baaaaad!

[@lnr12241]

Read this comment before I got to that part of the video. . . . Lmao that was soooo funny 😂😂😂

[@jiivee94]

Sums up that evening I guess 😂😂

[@BradMalpass1]

Zach is such a huge part to this team. Wiring is not for everyone but he seems to be extremely good at it

[@murican1889]

Zach’s wiring adds horsepower

[@sandyloyst1811]

Garrett! I just got done watching 1320's interview video of your rise for the third time. I love it. Could you do small interviews with each of your guys? Some of us don't know all their back stories, like did they even have their own race car(or interest) beforehand or where they worked before coming to you? Love and Peace.

[@Draco_Alpha]

that's a great idea. biographies of the crew would be fantastic!

[@narwhaljones4821]

The solid 6 second stare James gave Cleet once he dropped the tire bomb was absolutely gorgeous lol.

[@WestCoastWheelman]

That's no acting boy he was mad for real lol 😂

[@heathabshire8929]

Yeaaa I was dying 😂😂😂

[@kylewaters746]

He wanted to either swear at him or slap him in the side of the head, probably both. That right there was the real James and showed his competitive side. He was just as pissed as Cleet was and the rest of the team that is wasnt going down the track.

[@narwhaljones4821]

@@WestCoastWheelman "you dumb ass mother fucker" was for sure going through James's head lol

[@narwhaljones4821]

@@heathabshire8929 I re watched that clip 3 times lol.

[@ole661]

"I only do donuts in a racecar on accident...not on purpose." - James Taal (The the double blink when he said "you did what?" and the frustration and disappointment on his face.) Cleet needs a guy like this on his crew to knock him down a step when he does something stupid.

[@someyoungguy6990]

We all need a James from time to time!

[@PiDsPagePrototypes]

Yuuup,.. a mate we can trust to build us up when we need, and to chill us down when it's required, makes us better people.

[@vermeulengert]

25:40 For anyone searching

[@CrashRacknShoot]

Lol that look was pure murder from both Ty and Jackstand

[@rdejaynes]

Truth but a paid guy will never tell the truth. Then your counterproductive and not being a team member yada yada

[@jrod9560]

Lmao off...best Squirrel comment ever!!! " Well they look round but they identify as square!" I cannot stop laughing!!!

[@TheReal1CC]

The look on little rips face just screams happiness, he knows he has the best dad and mother to raise him and a whole lot of amazing friends and uncles to show/ protect him, rock on little rip

[@StanleyKubick1]

stop being a parasocial weirdo

[@xilix]

Better help is fucking abhorrent, Cletus. Get rid of it

[@kurtbilinski1723]

Retired EE here: yeah if wires are allowed to rub on Anything, they'll wear through, so you need wrap and/or padded clamps on all wire runs. One of the worst is letting stainless braided hose rub against Anything; it'll cut through like a slow saw due to vibration. Thread lock or Nyloc nuts on all hardware, or even safety wire on really critical stuff. *In short: build your race cars like aircraft.*

[@Bill_N_ATX]

Great idea in treating the wiring like aircraft wiring. It’s not cheap but when you are going fast for a living, or at least trying to, going that last extra mile is a good idea.

[@plc268]

​@@Bill_N_ATX Yea, the wiring they showed in the video isn't great. There really shouldn't be any exposed wire without extra sheathing. There should be grommets going through panels. Actual motorsports wiring is overkill for this exact reason. Racecars will go through excessive vibration... bolts will vibrate out, solder joints will crack, wires will chafe, etc. Safety wiring the bolts is a good idea, especially for bolts that prone to backing out and are critical to the operation of the car

[@kevinhibbard320]

Yeah people think of carbon fiber like plastic or fiberglass, but it will short out and or ground out like metal haha

[@fawnn1644]

Fun fact.. Carbon is also a great thermal conductor. Carvon fiber panels (depending on the way they are made) can be more thermally conductive than copper

[@bradley3549]

Yup, this is a car with several hundred thousand dollars worth of parts, the wiring needs to match that level.

[@Will-W]

"Better help does not vet the quality of their therapists." Read the fine print. They also are deceptive when it comes to letting you unsubscribe. Vet your sponsors brother. I know you're running a business, but integrity matters.

[@jeffdunahoo982]

I love how Cletus uses the word "We"! He has so much respect for his team!

[@GLOBAL-INTIFADA]

You can tell George and cleet have good relationship because everyone else is like sad face trying not to make cleet mad but George starts cracking jokes and laughing 😂 he saved the whole vibe of everyone

[@hydewhyte4364]

How Fasterproms just stuck him in a closet grinding intakes is beyond me.

[@KermitOfWar]

​@@hydewhyte4364 You'd be surprised how many fellars like George work a everyday slave job. The man just happened to be employed at the right place/right time. George pretty much won the lottery becoming good friends with Cleeter, Cooper, & Jackstand.

[@Sabrinahuskydog]

@@hydewhyte4364 There's a reason Fasterproms is dead now.

[@randywl8925]

He's a hoot.... and his play by play is awsum. ......and I soooo miss George trying to out launch Falcon 9 with the Blazer. 😁

[@GLOBAL-INTIFADA]

@@hydewhyte4364 if that's he's previous employer it's like what do you expect dude we all have to work lol how would have he fed he's family and met cleet if it wasn't for that opportunity to work at he's shop ,

[@WouterB76]

Tye and Zach got skills and the right attitude, keep up the good work!

[@theRealLeperchaun17]

George's subtle comments are so hilarious

[@robynbenander8866]

They look round but the identify a square, you got to love the Squirrel.

[@jamezkantor9574]

The best camera man ever!!

[@INFLICTEDPAIN213]

By far the best hype man of any channel

[@seanc9650]

Yeah, George as the cameraman just always takes the video to a better level. He’s quick and funny while not being overly talkative. Perfect if you ask me.

[@Dealete420]

He just likes to hear himself talk... most 3rd graders are like that.

[@kodymcmullen5691]

Your videos really are a form of therapy for those of us who dream of doing this stuff but can't afford it. It's nice to see someone so humble and deserving of these opportunities. Never throwing it in our faces. Just taking us along for the ride.

[@jtwndr]

nothing better then coming home from a long days work and watching cleetus from AUS!

[@the_fight_formula]

Zach yelling "Its baaaad!" from wherever he was on Mullet was hilarious.haha

[@TopGoose-bf1mx]

“New day, new wires, new tune up, new tires.” 🤙 -Ol’ LS Georgie

[@scotthansen1287]

Greatest group of guys around. When they all put their heads together there is noting that can't be solved. Nice to have Pete as your "phone a friend" just in case.

[@matthewprather7386]

Let’s hear it for that Steve Morris scratch n dent in Mullet! That thing is a beast!

[@10thclimbtovictorystevens65]

I thought that one got replaced didn't it?

[@missinglinkster]

​@10thclimbtovictorystevens65 no that's the original SMX that was in Steve's wagon

[@TT2.7F150]

@@10thclimbtovictorystevens65 they kept finding metal in the clear view catch screen. Steve tore it down and gave it a once over. Still the scratch and dent special

[@NaRoonStarrider]

Yes that's the one he won the World Cup race with also, so I guess its a champion scratch n dent??? I can't remember if it was 6 or all 8 rods that left that engine when it was in Steve's wagon. Steve fixed it up and sold it to Cleet on the cheep.

[@Wockkkyyslushieee]

@@NaRoonStarridera $60,000 engine is cheap ?

[@caseyb1316]

“They look round but the identify as square” 😂

[@itsfeltzzz1841]

Under rated joke😂

[@jpc42480]

Cleetus, we are all waiting for sick summer day 1🤷‍♂️

[@NotABot88]

Steve Morris just uploaded. Mullet blew up again.

[@lilbitofjoy6130]

Well, sounds like they are a bit busy. Mr. Sam posted yesterday they were stopped at motion race works swapping out the transmission and today Steve Morris posted Mullet is running on 7 and he was headed out for a 4 hour drive with parts and tools to try to fix it. He said hopefully Cleet could get a run in on 7 this morning, have his track run done for the day and spend the rest of the day fixing it. With transmission problems on day 1 and engine problems today, I doubt videos are on his mind right now because if he was not able to make a run this morning, he is out. If he did get a run in and can not get Mullet fixed, drive to the next track and get a run, he is out.

[@timscortino1882]

James slow blink about the tires is priceless.

[@leeboyzx6r]

The disappointment on jackstands face at 26.00 is just great😂😂

[@yotamaster09]

This is why you have the best team man. You treat them amazingly and they bust their ass to figure out crazy gremlins like this. Always loved how you treat your crew. Also, killer video, one of the best thrillers of 2024 thus far!

[@tyler1735]

50 minute video, what a way to bless our Sunday evening. Hell Yeah Brother!

[@JosephNnbs]

I’m glad you posted. I’m about to lose it. I don’t have the right tools to cut this ptfe fuel line and I’m having the worst time doing this crap. I don’t have an angle grinder. I have never made fuel lines before so I didn’t expect to be this much work. They ptfe ward more difficult but I didn’t expect this. It’s alright. In less than 2 weeks I’ll have it all finished and blower installed

[@brutalbasspro]

32 teeth hacksaw or an axe or a sharp chisel with a 5# hammer.

[@Ghost6.2]

Cut off wheel and electrical tape

[@Ammoniummetavanadate]

Dremel cut off wheel does it well.

[@nicholaspayne349]

Yeah cut off whee and tape is the best way. Listen to the guy above me.

[@cozmium]

What this guy said ^ A good swing of a decent axe will make a nice clean cut of almost anything. I often use it for 4/0 gauge wire as easier and quicker than cutters.

[@jimpeterson8393]

I rad comments after the vid... If you do too, James' face at 26:05 is priceless!!!

[@CPLFit]

The look James gave Cleet when Cleet said “I did burnouts on these tires at Indy” was straight up Dad energy. The look a dad gives his kid when something stupid happened.

[@br549rdr]

I really enjoy jackstand always grabbing the ticket and reads off each number with meaning!!💪

[@eddominates]

it's too bad he's always racing in the events, he would be great at announcing.

[@David_Conant]

Cleetus should watch Steve Morris’s video on not using traction control like that.

[@bumi9801]

Love when jackstand reads off the time sheets

[@Franzell91]

I seriously was thinking, as he read the last one, how much I love hearing him read them off every single time.

[@C6Z06J]

I like Zach’s breakdown even though it’s what I do for a living. Chasing wiring issues on industrial machines can be a crazy task. It comes with amazing job security. Most can’t be bothered to learn it lol.

[@Kiki-Kauai]

When I see Cleet n the guys now I can’t help but think about all their amazing wives we got to see racing each other. What an awesome bunch of wives, mothers, friends and supporters of all these crazy awesome events.

[@almightycason23]

Jackstands face when he found out he was doing donuts “ you know this is a drag car right?” Lmfao 😂😂

[@bpl101]

Don’t think he found out… but disappointed the tires never got changed🤣

[@OnEst_Opinion]

19:21 “See, good thing we didn’t weld those bolts like you said” 😂🤣😂🤣 little things like these comments are why George is the GOAT of commentary for the channel. I feel like the dude could host anything and have the entire crowd and tears laughing lol

[@jesse096]

Are we going to get any Sick Summer coverage here for us broke folks? Or is it only on FRDM+?

[@ThisManTriggeredMe]

That's how he thanks his fans. Blocks us out of all of the events via a paywall... He will eventually put some kind of content up for us poor people, maybe by this weekend. I'm not hating, truly. I appreciate he's a successful businessman. But it's such a shitty thing to do to people

[@saxdudegcgt7217]

Normally he have a video of each day within a couple weeks but if he's still recovering from the month of freedom he may not. We will just have to wait and see. There's a few other car guys that do videos regularly too so you could check some of them out. Let me know if you need some names.

[@mbsanocki88]

Cleet, you have the best crew. Every person you have working with you fits perfectly. This channel wouldn't be what it is without them. Just saying you got grown men out here getting super excited to watch a KZbin video. You're doing everything right.

[@jeffshetler3516]

Jackstands disapproving Dad look is coming along well. Haha

[@mikemiloshis772]

Jimmy Jackstand - fresh tires you know... weird 😂😂 30:03

[@eddominates]

25:36 * blink * "....you did what?" 😳 man I laughed so hard!

[@stlchucko]

40:19 Sam still got the hood up, checking to make sure that blower is still there and shiny

[@jacksontelano8717]

I love how positive George is!

[@JB-rp6it]

Pete to the rescue! That dude is real good at doing stuff.

[@woody8577]

You mean that guitar playing nut? Yeah, he is pretty good at what he does.

[@KyleWKDUB]

That new tuner Rip put a bunch of stuff out of whack on mullet. He will get there.

[@Thacko_San]

Just what testing is for, you guys are becoming an elite team of guys who can find and solve problems at a fast rate and its great to see the teamwork. Good luck for this week!

[@SGIMartin]

All the videos are great, but man - the drag racing videos are still king, and 50 minutes to end the week is just fucking great

[@fallenhobbit6554]

hell yeah

[@brandonrupp5880]

These longer videos are the best.

[@freedomfox8183]

The one thing I respect more than anything about Garrett is his willingness to share his mistakes and downfalls not just the positive... You don't see any of the big racing teams showing anything everything is tight-lipped but I promise you they have the same kind of problems the same kind of parts failures or they are rebuilding way more frequently than you would ever think... Props for being so transparent

[@ttv8ra23]

To be fair they probably aren’t having this issue hahahaha. Not many race teams swinging donuts on drag tires.

[@JoeR203]

Anyone else look at Cleetus and think of Judge Reinhold from Fast Times At Ridgemont High?

[@unlisted9494]

Guys, cmon, don't take sponsorships from better help. They sell ALL of your personal data to third parties, including full transcripts.

[@ocdrums24]

Where are yall coming from? I’ve seen shit load of these comments and he probably has 5 videos mentioning better help and I haven’t seen one comment until this one

[@unlisted9494]

@@ocdrums24 I usually skip the ad segment but this time I was driving and listening. Better help has a HUGE controversy over this in the past. Ask yourself how a therapy company can afford to sponsor thousands of KZbin channels.

[@HoLeeFuk317]

​@@ocdrums24 Better help was taken to court has to pay out $7.8 million for selling patients personal information including mental health information to 3rd party data brokers when they told customers that no info was shared. The info was intended to target relatives of current customers. They have also have been accused of using unlicensed therapists.

[@KR15ING]

​@@ocdrums24search "betterhelp the KZbin virus"

[@KR15ING]

Promoting scams to their subscribers to get rich themselves is what being an influencer is all about unfortunately 🤷‍♂️

[@HopsAndLead]

38:30 The loose screwdriver in the cup holder. That's safe 🤣🤣

[@eddominates]

it's not really an el camino if you don't have tools laying around in the open

[@robertroderick4933]

Yeah that'll been fun at 200+ flying around.

[@ryanf2709]

26:19 the 2 complete different reactions from Jackstand and Tun'em-all had me dying

[@shortshorts920]

Hell yes just got on the tube hoping to see a Cleetus upload.

[@Tylermaddox1911]

You're channel is one of the best on the tube. We all appreciate the work you put in on making great content.

[@burtbrooks7731]

George keeps the mood light 👍 gotta have that guy around times like that💪keeps everyone from getting at each other

[@pandabuiltchannel6318]

Looking back from your beginnings to now it's so amazing you have worked so hard great job brother!

[@aaroncampbell4639]

The slow nod of the head and looong blinks from Jackstand said it all 😂

[@zeddysven]

Can someone tell me what the tube coming out of the bed of Mullet is? Thanks for another great vid Cleat and team!

[@AimlessMoto]

Jackstand's eyes when Cleet admitted to doing burnouts on those tires was PRICELESS.

[@Osamabintardin]

27:47 zach from somewhere in the car "its baaadddd"😂😂 got me cracking up

[@marklindsey1951]

I keep seeing a lil chooch of blue smoke from the right bank on decel. Hopefully it's just a turbski seal and not something internal! I love the cleetr krew! Best yt channel hands down!

[@lisawilson4551]

OK Cleetus no more loop d loops with the drag tires please. My husband would’ve had a heart attack if somebody did that with his tires. Just saying so glad you figured out what you did with your tires. You’ve got this. You guys will figure this out in no time. It’s June 9 and tomorrow June 10. My husband’s going to pick up his engine for his 69 Camaro ssga looking forward to racing season. Be safe out there and have fun.🤣🤣👍👍❤️❤️

[@michaelnorman6905]

Ready to see the ol blazer back at sick week

[@MrSelmo85]

See it back doing anything lol

[@tomcoon9038]

I loved the Blazer! Why did it get retired?

[@JB-rp6it]

@@tomcoon9038it’s a turd.

[@baddaddy8718]

@@tomcoon9038I’m guessing because it’s too volatile. Wheelies and just a bad combination for racing altogether. Would rather see Ruby with a 6/71 and zoomies on it than the blazer myself

[@mtiger5]

As a combat vet . It’s much appreciated to have the mental health call out to all of this community no matter how you look at it we gotta take care of ourselves.

[@jono6379]

Yeah. But betterhelp has been in the news for hiring unlicensed therapists and selling peoples medical information so getting help is good using betterhelp is not

[@KR15ING]

Betterhelp are scammers, people need to support reputable mental health institutions instead 👍

[@brandonrupp5880]

Jackstand with the dad face and Nate with the belly laugh is the moment you know you messed up.

[@NoisyGriff]

I really like the way you told the whole story, rather than splitting it into 2 videos. Great stuff.

[@iyanmanzano]

“They look round but they identify as square.” One Liner George strikes again! 🤣🤣🤣

[@MykeHunts]

Man it would be awesome to see Mullet or Leroy with some "HELL YEAH BROTHER!!" parachutes

[@MileHighMountainAdventures]

PLEASE PLEASE PLEASE PLEASE PLEASE!!!!! Help Emelia Hartford acquire ownership of Willow Springs Racetrack!!!! If anyone can do it, YOU can Garrett!!!! SAVE OUR RACETRACKS!!!!

[@rosscameron9427]

26:00 could tell with jack stands face when he heard that the tyres were used at indy hahaha

[@DonPablo2011]

James "You did what now"? Just like a disappointed father. 😆

[@andrewmaddox9702]

Anyone else love seeing Zach fly in on that scooter every time mullet drives into the burnout box

[@Josh_D03]

My favorite time of the year. Love all the drag n drive content. Good luck boys andd God bless everyone

[@swizlstik]

I’ve said it before but never lose Squirrel as your cameraman/hypeman!!!

[@whiskeythetwisty5564]

27:48 real bad wiring problem, i dont know where zach is but hes stressed out. **from under the car muffled** ITS BAD!!!!😂😂

[@enriqueneustaeter1394]

This is the type of content I love seeing, testing the cars, getting data, things go wrong, things go right, it’s just real. One day i want my g body malibu doing wheelies on some insane boost numbers. What an inspiration this channel is. Go team mcfalrand racing!!

[@snorungar70]

The fact that squirrel had a crap job at fasterproms and now is excelling with cleet is awesome....

[@mrtandemslidessbtt]

This gets me now and again. Dude went from working with a grumpy old man with the personality of wet cardboard, to living the absolute DREAM and having a ton of fun at the same time.

[@richardaffonso]

Crazy!

[@catxx5480]

Had poor George locked away lol

[@user-ql3ge2us4s]

​@@mrtandemslidessbttlmao Jeremy's personality is super boring true. Good guy, but boring.

[@CloudHindlen]

Thats pretty disrespectful. Jeremy at FasterProms aways treats everyone very well, and yes his personality is a bit unique but he goes out and enjoys life the way he wants and helps out a lot of people along the way.

[@infamous9672]

The way rip eyes light up when cleetus says turn it up ❤

[@ozarkscarguy540]

I don't know if I've ever seen James mad at Cleetus but that tire issue was definitely the most disappointed he's been.

[@johnathandobney5267]

Jackstand's face at 26:04 🤣he's not impressed!

[@bowlica1]

If there was an Olympic sport for reading timeslips.... James would be a 10-time gold medalist.

[@Jockyboy91]

Cleetus video before bed. Yes sir 👌🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@mrtandemslidessbtt]

Ayyyy another haggis hunter. Not many of us it seems 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@Jockyboy91]

@@mrtandemslidessbtt There’s always a fellow Scotsman kicking about. I was actually in Florida last month, gutted no events were on but still went to Bradenton to watch a night race and take a pic of the freedom factory gates 😅

[@ryancook1664]

Glaswegian here boys, been to florida last year also and went to the drag strip. Managed to meet cooper but none of cleetus' crew!

[@Cas_anova]

Haha same here brother. Flying Dutchman over here.

[@Jockyboy91]

@@ryancook1664 James, dr tunemall and cooper were there but they had their family so I didn’t want to go and ask for a pic. Boosted boys were there too but again I shat it 😂

[@ThaAngryAussie]

Mullet heard about eagle and said “ I ain’t about to be a side piece” 😂

[@alwaysinverted1224]

😂😂😂😂😂😂😂

[@MaximumKarma]

The way he says idk where Zach is but… Zach From who even knows where: ITS BAD I’m DEAD 💀💀😂😂😂😂😂

[@Jacobbunt]

Between that and James disappointed dad face was pure comedy

[@ASLnothing]

The blank stares from everyone when he brought up doing donuts in mullet😭

[@LSDmac]

Man that screw driver in the cup holder went for a RIDE!!! Love the videos, can't wait to watch Sick Week.

[@voinopol]

Ohhhhh that was a screw driver.... I was wondering what in the world is that thing😂