Finding the Auction Corvette a "NEW" Junkyard Truck Engine! (Super Cheap!)

Cleetus Merch! - goo.gl/DWHJa3
Hopefully this one lasts a little bit longer!
Cleetus and Cars 2019 dates:
Feb 16th Houston
April 13th Bradenton
Oct 26th Houston
Nov 23th Bradenton
Here's our Full Schedule for 2019!
cleetusmcfarla...
Holley's new channel - / @placesholleypoops9094
Sign up to be a sponsor of our channel! - www.youtube.co....
-Leroy's Injectors! - fuelinjectorcli...
-Leroy's BILLET Intake! - frankensteined... (15% off one if you use coupon code "GODBLESSAMERICA")
-Leroy's Clutch (LT1-RR Triple Disc) - monsterclutches.com
-Leroy's ECU (Holley Dominator) - goo.gl/JjvakM
-Precision Turbo (turbos, BOV, waste gates) - www.precisiontu...
-Jeremy's Shop, Fasterproms (tuning) - [phone]
-Texas Speed & Performance - [phone]
-Motion Raceworks - [phone]
-ProFab Performance Plus - [phone]
-RPM Transmissions - www.rpmtransmissions.com
-Billet T4 Flanges - www.streetcarrfabrication.com
**MERCHANDISE:
"Leroy the Savage T-SHIRT" - goo.gl/2FSYaS
“DO IT FOR DALE” Cleetus/1320Video T-Shirt - goo.gl/2jvjJw
Cleetus "Twin Turbskies" T-Shirts - goo.gl/TYBLcV
Motoloot Key Tags! - motoloot.com/c....
**Social Media:
Instagram - goo.gl/LZvy5e
Facebook - goo.gl/gdwhh1
**SEND ME FAN MAIL... (bald eagles welcome)
Cleetus McFarland
12961 44th St N. Ste B
Clearwater, FL 33762
United States of America

[@adizzmal]

Quote for 2019: “It’s a bad idea, but I fully support it.”

[@mikeu.s.n.9099]

Should be a coffee mug and shirt

[@motoray69]

@@mikeu.s.n.9099 Agree. Make it a mug, ill buy it

[@kennedy796]

Quote for 2019: "Dont hate me im hungry and dumb"

[@tylerwilliams1625]

I fully support your name and picture

[@THEVERYANGRYPERSON]

That theory had me behind bars a few times ffs................

[@pmedic88]

Junkyard James, Grungy Garrett and Crusty Cooper

[@AlamoCityFishing]

pmedic88 Greasy Garrett

[@TheCUTTERbyPHOENIX]

@@AlamoCityFishing i rather prefer Greasy Garrett, sounds amazing !

[@goaway4702]

😂😂😂

[@pmedic88]

AKA “The Junkyard dogs” and Leroy is the baddest!

[@vtr0104]

Sounds like a League of Legends Skin Pack :|

[@CarswithNash]

The wrecking ball scene was disturbingly hilarious!😂

[@biggin5434]

LMFAO

[@a02endless15]

Matt's Garage yes with a slight of cringe.

[@joshhoward6223]

It came full circle with his t-shirt😂

[@dejanaleksic821]

Hello everybody recive Free I N S T A G R A M f0ll0wers Serach For *igbuddy*

[@NotSmokeHD]

More like cringe AF! I have never had to skip any part of a cleetus video until today. So sad... "I watch all of his videos btw" 😭

[@gipper89]

Dude, James is the backbone of your operation. Love what you guys are doing!! Great work! James keep on schooling us, brother!!

[@kaostheory2940]

We need more videos like this this was absolutely hilarious

[@fairwarning3837]

m0ar RUBY!

[@kaostheory2940]

@@fairwarning3837 no junk yard videos

[@fairwarning3837]

@@kaostheory2940 That junk yard was painted RUBY red!

[@richardtschida2321]

Hell yeah brother!!

[@JoshMey]

Probably the cleanest junkyard I’ve seen😳😳

[@thiscrazytangerine8954]

I was just thinking the same thing!

[@James110193]

Yea LKQ is very nice

[@larryharris937]

@@James110193 What part of the country is this?

[@2v_media]

I thought the same thing. Soon as you walk into the pick n pull here in Dallas it's straight dirt. All kinds of ruts and dips, mud everywhere, cars and parts torn up everywhere. This pick n pull looked amazing.

[@karter2895]

larry harris Tampa, FL area

[@4ws0m0]

And this is why I love this channel, almost felt like I was in the junkyard with y'all.

[@billnalder1017]

"This is our fourth motor this week"!..

[@listcheck]

they just need better bearings, rings, wristpins, rods

[@vector6977]

Rookie numbers.

[@capnbill99]

Slow week, I guess..

[@socialghost4400]

One would almost guess it was a French car.....because then that would be normal

[@Vidz0022]

Should have pulled a few more while they were there...

[@jtg_edc]

I remember when James first showed up and you said he's gonna be helping out for a little while... Well I think that little while has turned into forever cause there is no way that we would let him leave the team. Such a good, stand up dude.

[@fncrazy101]

What a fun episode! I remember the first time I went to pick and pull. I helped my dad pull a motor. It was a blast.

[@dk832002]

Should snag the 6.0 out of the Escalade

[@ricardomuniz9951]

They work good? Or?

[@peterhineinlegen4672]

There's no replacement for displacement.

[@Sackmatters]

Peter Hineinlegen that is what turbos are for.

[@MrPowerpen]

Sackmatters but turbos on a 6.0 is better than turbo on a 5.3

[@purehonda23]

Bro I've been saying the same thing.. 6.0

[@matt2m]

I love ruby now you guys pulling an engine and doing a dingle berry hone is giving me roadkill vibes.

[@interstatemotorcompany2355]

lonewolf5460 True! Very Roadkill!

[@denisohbrien]

except this is actually on KZbin.

[@rteagular]

Sloppy mechanics cough*

[@Mr.Potato420]

@@rteagular what else are you going to do with a 100k+ mile engine when they will just blow it up again with 50psi of boost lol

[@rteagular]

MR SK1LLFUL I was referring to the KZbin channel and online forum where this is common

[@rafiqsoufiane2723]

"thats the first thing ive driven in a while that hasnt broken" 😂😂

[@Keo]

@Breeze because it makes people laugh. also if you don't like comments why are you reading them loooooool

[@Kalvinjj]

*Yet.

[@rafiqsoufiane2723]

@Breeze see you are the type of guy whos subscribed to someones channel only to hate and press the unlike butten, i am not commenting to amuse your hatefull bitch ass, no one asked you to read it from the first place

[@Keo]

rafiq soufiane exactly

[@ziiofswe]

Probably because it has no turbskies.

[@johncundiss9098]

We got what I call the "Family Cherry Picker" I know its red, lol. This thing has been to my house, both my nephews and one of my sisters. We all use it now and then in this family from truck engines to tractor and go cart motors. Been taken apart so many times the paint is off around the bolt holes. Both engine stand almost always got and engine and need to move it to fix the next. Love it and watching here.

[@taylerannsupergirl5587]

I love that you’re doing it yourself. More satisfying when you don’t take something without working for it. Do it for Dale from Winnipeg!

[@xenaguy01]

I'm loving this series. The "buying an auction Corvette" video got me hooked.

[@roodick85]

That's the one that got me hooked too lol

[@typhoon4545]

Same here lol

[@jeromyrehling6043]

Nice satisfying thunk when it hit the ground 😂😂😂😂

[@obaharris4040]

Jeromy Rehling time ?

[@WelcomeToTheMadness]

I would have never thought that I would see you in a Junkyard getting down and dirty. (At this point) PS: I’m surprised none of these major companies didn’t overnight you one. Engine suppliers you’re slacking! Oh yeah, and that's the nicest junkyard I've seen. No rocks all over the place...pretty smooth roads/pathways

[@impregnate.]

like he said, he got many offers from people who had 5.3 V8s. It's a junkyard, cheap type of build. That's why he didn't wanna just buy a brand new engine.

[@barath4545]

Even Jay Leno have to buy some engines himself and take a shit himself. I remember hearing a from guy who helped Tom Cruise personally (once) in a hotel, setting up VPN on his laptop, which Tom used all the time for privacy. So even the most famous people have tech things to deal with.

[@kristokallas1669]

I belive he told at beginning, that they got many offers, but they turned them down, they wanted junkyard engine for Ruby.

[@WelcomeToTheMadness]

Not engine offers from people...He did say many PEOPLE offered him engine options. I'm talking about engine suppliers themselves. Corporations...Not the little guys

[@brentanco]

Welcome To The Madness you’re missing out on the point

[@dudeman0248]

I forgot how scared cooper is about everything. lol that’s why I was glad to see him go

[@tonyhawk8461]

9:27 “it not bad at all” (there’s 2 leaves laying in there)😂😂😂😂😂🙃

[@craig2963]

We always use a seat belt for pulling engines in the junkyard. Works like a champ. Just run it from engine mount to engine mount. I made this comment before they used that little piece of one. Just cut a nice long piece and tie it through the mounts or bolt it with the mounts bolts.

[@4ampaul]

Yeah cutting it and running bolts through it wasn't a good plan

[@roodick85]

@@4ampaul lol yeah horrible idea. They wasted that whole belt

[@bluecollarracin524]

We do the same thing too LOL I was wondering why no one knew that amongst the grew

[@zracing1272]

The wrecking ball part was the best thing i have ever seen

[@mjmcomputers]

This is going to be good. I’m guessing there’s a lot more than 100k on this one, 100k was just the last time anyone wrote down the maintenance.

[@darrenh3732]

Cooper is a good lad sitting nicely in the back, make sure he gets a treat :)

[@joshlarochelle1298]

For a junkyard motor you always want a vehicle like that that’s been wrecked because they have less mileage on average by far than the clean exterior ones that have already blown and are there for that reason. Good pick guys, she’s up to the test for a while.

[@owengundry8244]

I went to this lkq and got parts for my 2001 dodge neon. I got a spoiler and some interior parts for it too. It’s my first car and I’ve been trying to improve it where I can

[@crazyman8472]

Now whenever I hear "Wrecking Ball", I'll think of Cleetus & co. 😎

[@EdWolfram]

You fellas have way to good a time. Thanks for bringing us along.

[@MulsanneStr8GT40]

Been watching this channel since the beginning.... Every posted video = Smiles for days This is the best channel on KZbin by far

[@mr.cosmos6691]

Got the same motor sitting in my garage ready to take to the machine shop. Super excited to see what they do with this!

[@jtsmall7086]

This has to be the cleanesr pick and pull i have ever seen.

[@XPlaneMedia]

Already rebuilding Ruby! We need some extra bartle sceet to make sure Ruby will stay together this time. Hell yeah brother!!

[@streettraction9405]

New shirt “JUNK YARD JAMES”

[@James110193]

Would buy

[@RegulerShowTV]

Emmanuel Silva Zapata My names james so i’d definitely buy

[@redbirdauto1713]

That engine has no idea what kind of greatness it is going to fulfill. This is its destiny.

[@whatsreallygoingon253]

im a die hard ford guy but i got mad respect for the ls its so easy to take a junkyard engine and get big power cheap

[@NICKDOG154]

Man even a mission to the junkyard still a fire video 🤘🏼

[@ThriftStoreHacker]

If there wasn't 3in of snow i would be at pick n pull today. One of my favorite toy stores.

[@Beijzer]

ThriftStore Hacker srsly tho...

[@jpa1282]

The new Miley Cyrus lmao .love the entertainment

[@aboutmyfathersbusiness8324]

Carmel color under the caps is a very good sign even at 200k. Fascinating!!!

[@joer8854]

You guys need a travel lift setup at the shop. Two steel I beams running in one direction that wheels run on welded to another beam so it looks like this "H". You putt a chain hoist that can take some serious weight on more wheels that run on the beam that travels so you can swing it around the shop and use it anywhere you need it.

[@WS6xMASTER]

Put some gen 4 rods and pistons in it

[@shoes121255]

Nah go with gen 5 lt4 rods

[@n7565j]

The short block was only $29, all the sh!t you tore up cost $200... And don't forget the seat belt you destroyed!!! ;-) Did it for Dale :-)

[@joshestep7311]

Seatbelts are proper lifting devices in junkyards 😂

[@crashcx]

That seat belt was fucked during the accident anyways.

[@codyvassar9908]

The block was 229

[@ibrooksie]

Cleetus is life. I dont even have comcast anymore.

[@camronshrum]

So excited for ruby to be getting a new engine congrats. Love you guys.

[@michaelrogers2758]

Long time watcher, first time commenter, "I came in like a wrecking ball," was priceless. I was thinking, "how fitting, this poor little old man owned and maintained babied engine just had Cleetus McFarland come in to it's life and it has NO clue what it's in for." Then the seatbelt broke, it hit the ground, and I busted out laughing, "welp, there's an introduction to your new life!"

[@colestiefbold4093]

Damn I got excited when y’all started looking at the 4.8

[@eternalthread7846]

Cole Stiefbold same I wish they would’ve got the 4.8 it’s better imo

[@GyroPyro121212]

Eternal Thread I wish they would’ve stumbled upon a 6.0 LQ4.

[@CJColvin]

@@GyroPyro121212 Same here.

[@eternalthread7846]

GyroPyro12 yeah that would be the best not as plentiful in the junkyards as the other 2 iron blocks sadly

[@GyroPyro121212]

Eternal Thread Unfortunately

[@CainSample]

You dropped it like a WRECKING BALL! 😂👍

[@kheff46]

That was a nasty crack! Wow. Glad you guys didn't waste any more money than you had to on that thing. And glad you have spare parts

[@edvinmesinovic3819]

Please make a shirt of that exact moment with Cleetus swinging on the block

[@TrekkerMoto]

That looks like the nicest pick your part I've seen. The two we have here are all gravel that have a quarter inch of grease all over it

[@Tellisjr]

Does anyone else just know in thier ❤ that this is gonna end badly???????

[@maxnaz47]

Brings in the views yeah?

[@chadvarnell1889]

I think the point is to see how may times they can grenade motors in Ruby. $229... CHEAP FUN without the expense, and guilt.

[@iamhawkeye3162]

So? Lol

[@gizmogoose.2486]

You just have bad memories from your Dad turning into Papier-mache!

[@johnmccarthy2208]

Terry Ellis that’s the fun in it Jesus GET WITH THE PROGRAM!

[@HRM.H]

The one bolt puller , havent seen that in years.

[@Grumpy_old_Boot]

That was a heroic bolt, though. 😊

[@Corey497]

those cranes are fuggin nice !

[@timothysmith1460]

Cool! I got a '99 Z71 w/ a 5.3 still running strong at 248k miles baby.. 😎

[@2bracing794]

That 4.8 will take boost cast block an flat top no 5.3 only 5.3 with flat tops is aluminum block

[@Andy-uj9he]

I absolutely died laughing when that block hit the ground! This is hands down my favorite KZbin channel! I love you Cleetus James and Cooper!

[@jonathanafrica3150]

Engine hoist? You mean Tensile Tester for everything you forgot to disconnect

[@CS1503]

You guys sure have gold in dem yards! My local ones usually have crap nobody wants or are picked clean by the employees!

[@angbar9075]

Same in Bakersfield

[@lewissilverman7697]

That boost came in like a wrecking ball :- OG Ruby 5.3 2018

[@WhistleTeets85]

😄

[@Sly_hog2007]

grassroots at its finest!!! When I was driving bombers as a teenager, this is how i got most of the parts for my "stock" 350s!

[@scottdial2390]

Love these episodes!!!!! Nobody else is doing this!! Well except roadkill 🤷🏽‍♂️ but it ain’t the same

[@jacksonroper7438]

“I came in like a COPY STRIIIIIKKEEE” is what it should be 😂😂

[@Strunz0]

Not if you keep the audio 3 seconds or less!

[@carsetc1794]

@@Strunz0 it used to be 10 seconds lol

[@jacksonroper7438]

@@Strunz0 I'm not saying whether or not it will be, but just saying it's a possibility haha

[@RatchetWrenches]

Yes I can’t wait to see how this one turns out. I freaking love your builds. So out there and unique! I want to be like this, help us get 1k!!

[@alexfavor8533]

Ratchet Wrenches agreeed! Also you gained a sub

[@macaustin8075]

One of kind! He definitely is one of the most entertaining youtubers

[@RatchetWrenches]

Alex Fav 🙏

[@Drivewaybuilt]

Why can't you just make good content instead of begging for subs - its so annoying

[@RatchetWrenches]

Driveway we do

[@MA_Lifts]

Just some good old fashioned freedom

[@35RSkyline]

That poor poor 5.3 lol. It has no idea how much freedom it is about to see.

[@kevinlacy5336]

Cleetus swinging on an engine with miley playing was the sexiest thing ive seen all year

[@calvinh.8882]

A crash that cracked a head, could also be a crash that screwed up the crank bearings.. I hope not, but I have seen it before..

[@HUMMUHSMIFF]

Love this episode!! It's the kinda crap I would have do if I wanted to do a LS build! LET ER RIP TATA CHIP!

[@taylorjams4845]

Idk why, but i laughed so hard when he came in like a wrecking ball.

[@clubracergt1]

Junkyard James rockin' the King Ranch. (Damn. I spent too much time working for Ford.)

[@hidros1461]

Probably one of the most entertaining vids yet didnt know it was 13min long until I finished watching it lol Hell yeah brother!

[@hunterjessup]

This is good strategy. Those engines are pretty much disposable.

[@alsmoke6421]

Junkyard james has to be a shirt

[@johnmccarthy2208]

Al Smoke hell yea

[@MrRyanMcCall]

You may have called it Ruby but I will always call it Lightning McFarland

[@Ennis09]

James is incredibly smart lol, he legit has knowledge of EVERYTHING. I don't know his backround, where did he work/do before?

[@raypar1808]

I don't know about you guys but this type of video was freaking awesome. We need more videos like this.

[@SupaNami]

Junkyard Adventures with James

[@Sidz_Channel95]

Pick n pull saves lives

[@thiscrazytangerine8954]

And wallets

[@wvangus82]

No doubt. They saved my ass on this Monte I bought. It had a busted water pump inlet. Had to go 5 hours to a pull-a-part to find the water pump inlet, and when I checked out it cost $5.50 lol. I looked for this little piece for 2 months! GM had discontinued parts for the obscure 3.4 DOHC (LQ1) years ago and I wasn't going to find it anywhere new.

[@Blizzard020]

Gaul dang watching this at an ice fishing derby in Canada !

[@rowdyron32]

Hell yeah brother! True fan right there!

[@interstatemotorcompany2355]

Wooh! Hey, you know we have fishing down here in Florida too, right? And you don’t have to cut through ice to get ‘em!

[@2v_media]

@@interstatemotorcompany2355 it's the challenge of fishing out of a small hole.

[@alexdix1303]

From Cletus to the home of Traile Park Boys, keep your stick on the ice From, Iowa 👊

[@shitbox7413]

Blizzard020, The pike must be lazy today. 😄

[@Dishtowel973]

I miss this type of content from Cleet.

[@WickedMoto]

Hey you guys know what you're doing however, one thing I'd just point out to look at, check the piston to wall clearance first because after honing for the fresh set of rings you may not have to gap the rings all that much. The honing may take another .001" off the piston to wall gap (maybe not even that much but it will increase it slightly). If it's already excessive (the P2W gap as it sits before hone) for the bore size and piston size, on top of having a looser ring gap you'll end up having a ton of blow by and be down on power a little bit because of it (remember cast pistons don't expand like your fordged internals do so it won't be closing the gap up that much). But knowing you guys and for as cheap as you're in this motor specifically, you can always compansate with MORE BOOST! lmao! Anyhoot, HELL YEA BROTHER! Can't wait to see Ruby ripping and being a savage again!

[@kithylin]

They have to gap em for high boost.

[@WickedMoto]

@@kithylin Yes i get that, im not saying not too. I am saying that if there's already excessive p2w clearence, ontop of honing (which does remove material and further increases it slightly), they may not have to gap it as much. Why do you think an engine with high milage has blow by in some cases? Because over time, the p2w clearence becomes so excessive that with, now essentially, a larger bore diamtere by even .002"-.003" of an inch, will increase the ring gap. So if you started at say a .017" ring gap on a freshly bore/honed block, you could now have .020" ring gap with a higher mileage engine. Thus increasing the ring gap and increasing your blow by. So hence my message in saying why they should at least check it first and see what the P2W gap, and the ring gap as it sits (and they're going to have to file fit the new rings anyways, this i know, i'm speaking to what measurement they would go to with the new rings), ontop of them wanting to use a ball hone (which will take more metal off the cylinder walls), if they just gap them to what a ring manufacturer would want you to in the sheet that comes with piston rings, it may be too much, causing even more blow by. Then they would have to increase the boost substantially to get back to the same power level. Ontop of that, it would greatly increase crankcase pressure and that's not what you want. That's all I'm saying. Also note that cylinder out of round is a thing as well and that can cause more blow by as well because now the rings dont have a perfect seal if it's in excess.

[@johnnyturbo8460]

Lol $229 for the short block.... WTF!? They must know who you are and figured you have some deep pockets! We want to see the video of James getting his "Junk yard james" tattoo lmao.. all profits go to his wife for that KZbin episode!! Lol

[@phatkatracing]

Cuz they were assholes getting it out. No need to hack up everything.

[@michaelscott9791]

@@phatkatracing you're crying all over this post over that shit

[@phatkatracing]

@@michaelscott9791 I am.

[@johnjacobs2238]

@@phatkatracing this dudes a joke. A spoiled brat who was given everything and now using KZbin for everybody to keep giving. My dad been running low 7s since the 60s with a 63 corvaire with big block in the front with no bullshit turbos and gay nerds to tune it

[@johnjacobs2238]

Who'd of thunk a aluminum chassis with no body on it and 1800hp would be fast? No shit

[@whatchu_talkin_john_willis]

goes to a U-pull, pulls gen3 that's full of water (insert bad luck brian here)

[@swackhammer2139]

Soon as I saw that clutch fan my first thought was that's going to be a bad time.

[@MrAristes]

I was wondering why they weren't actively looking for later model trucks with G4 goodies. Oh well, regardless of outcome we'll be entertained.

[@slysithejuicegy]

@@MrAristes If they have any sense it will end up with gen4 rods and pistons as part of the rebuild/teardown.

[@MrAristes]

@@slysithejuicegy Yeah, I agree. By the end of this year Gen4 stuff will be more prevalent in yards and it will only get better after that. I missed out on a 6.2 for $600. It was sold the day after I inquired. Local scrap yard has no clue and thinks an LS is an LS and not special unless it comes out of a "sporty" car.

[@tnexus13]

The A-frame looks like a good project for McFarland fabrication?

[@gusrockes]

the 5.3 with the cable driven throttle is a pre flex fuel making it a LM7 and flex fuels where L59 motors. LM7's are more desirable for small engine modding cause the flex fuel system can be obnoxious to work around for small upgrades and swapping a LM7 is easier with less sensors and low pressure fuel system that can mod existing pumps to run it

[@larryjohnson1966]

Wow, junkyard picking, now that brings back memories. Good job guys.

[@zachyurkus]

It seems that James really likes to say the word “dingleberry”.

[@birkenstockresouler]

who doesn't?

[@greenhorn223]

Fourth motor this week you guys are hard on equipment LOL

[@PedramBastan]

Do it for Dale..... I bet that's why most of us watch. These guys are living the dream. I wouldn't give two poops if I was making $40k + a month either.

[@datasailor8132]

I would have gone for an LQ4. Same as the LQ9 but lower compression. With a turbo lower might be better. They both are 6.0L engines. The important thing here is that they have a 4.00 inch bore. This allows you to use the later heads with bigger valves and the rectangular ports rather than the cathedral ports. That said invest in a set of ARP rod bolts, crank studs, and head studs for this engine

[@IntelGoesHard]

Matt Happel made 1060 wheel horse power on a 6.0 with reused rod bolts and head bolts. Lol its fine

[@postmelon3402]

Coop always trying to be careful then there’s James an Cletus 🤣🤣🤣

[@ZmanRides]

I laughed so hard in the middle of class at the wrecking ball part cleetus you’re getting me in trouble my funny ferocious friend

[@bassntruck]

This motor is going to be full of rust and water. You can see it has been coming in at the throttle body. EDIT: Guess I should have watched the whole video. I saw that coming.

[@freedomfox8183]

Good and? Watch sloppy mechanics videos none of it's a problem if you do it right that motor will be running like a top in no time Matt Happel has had ten times worse looking engines run 9s in his Colorado and he's built several 700-1000 hp set ups with junkyard 4.8 n 5.3s...it will be fine

[@CanadaBud23]

Hot tank and clean will take care of all that with fresh bearings and hardware. Most of that is rainwater that seeped in..

[@stormchaser8472]

that engine is gonna have rusty cylinders with that water and corrosion on and in the throttle body i would have taken the one out of the tahoe

[@GyroPyro121212]

stormchaser8472 They said they plan to hone it so the cylinders will be. Leaned up. If there is substantial rust that will cause problems elsewhere inside the engine, I’m sure they will deal with it accordingly.

[@kevinc9006]

I think James has got a plan....ain't his first rodeo jackass

[@Krystopherbyers23]

Miley Would be proud of you 😂😂😂

[@alexdix1303]

Anyone else keep checking the time played because you want to enjoy every moment? #kantgetEnough

[@icebreakertech]

"It's a bad idea but I full support it" real friends :D

[@WoahNelle]

This is the only LKQ I will go to. Great finds in there all the time.

[@mbloss302]

I clicked off goonzquad for this😂

[@staytuned6944]

Lmfaooo I did that too I only had like 3 mins left 😂😂😂

[@reponut12345]

Why were you watching that shit in the first place ?

[@DbsDownunder]

Because its better than watching 'The top 10 reasons why a 60yr old actor is no longer staring in Hollywood blockbusters.' Errrrr maybe because he fiddles with kiddies, gtfo here.

[@davemcdaniel4856]

I don't know why you won't grab a 6.0 or 8.1l truck motor. Way better platform to start than the 5.3.

[@regal105]

The 8.1 makes a great paperweight

[@aaronpowell4885]

The 8.1 is a big block. Essentially a 454 with a longer stroke. Much heavier than a 4.8 5.3 or 6.0 and no parts compatibility.

[@jimihendrix225]

theyre just using the same template as Auction Ruby's original set-up and trying to duplicate her drivetrain before all dem baldeagles blew her up to vortec heaven

[@TheVanderbone]

8.1 build would be ridiculous. A good kind of ridiculous.

[@davemcdaniel4856]

@@TheVanderbone right? 6 bolt heads. Forged stock cranks in the 01 to 02. 350ftlbs at idle stock going up over 450. Raylor engineering makes tons of go fast goodies. 650-700hp/800tq on pump gas, no boost with cams,intake,heads. Boost it with forged pistons and they get stupid.

[@lomax3216]

SAFETY THIRD....lol

[@joonaslaakkonen8096]

Im not sure about third but its on the first page atleast i think maybe

[@TheMofoManiac]

That was absolutely hilarious with the swinging on it, the song, and it dropping. Perfect editing, I was rolling, funniest episode so far.

[@danieltroyer9787]

50 lbs of boost and a lot of freedom that's awesome I love it